AD Splice ignoring tablespace settings

Hi,
Facing issue with adsplice.exe.
Environment: Windows XP SP2, Applications Release 12
I am executing adsplice.exe. It is able to connect using the 'SYSTEM' schema.
After i give the control file name in the step - "Please enter the name of your AD Splicer control file [newprods.txt] :" it gives a warning saying -
"Warning: Because the database is in new tablespace mode, AD Splicer is ignoring the tablespace settings in your control file!"
It then says - "Successfully read file F:\oracle\PROD\apps\apps_st\appl\admin\newprods.txt."
Then it throws series of error messages, pasting one of them for reference:
"AD Splicer error:
For Product mth: Shared Product ap not licensed (and will not be)."
Here are the entries in the newprods.txt:
product=mth
base_product_top=*APPL_TOP*
oracle_schema=test_OPP
sizing_factor=100
main_tspace=OPP_DATA
index_tspace=OPP_IDX
temp_tspace=OPP_TEMP
default_tspace=OPP_DATA
Hoping to get some directions on what might possibly have gone missing/wrong.
Thanks in advance,
Praveen.

I am running into the same issue with a few
sites...especially since the TCP timeout to realize that is has to
revert to a proxy is not conducive. I would think a client side or
registry setting would fix this, but cannot find where to change
that. Any ideas?

Similar Messages

Hallelujah, finally disabled OOPP. I use Firefox 9.0.1 and will not upgrade to anything that ignores my settings. Been looking for this info for years!

As soon as Firefox came out with OOPP, I immediately asked how to permanently disable it and had a Firefox developer straight-up lie to me and say it couldn't be done without downgrading. Thank GOODNESS for the instructions on https://support.mozilla.org/en-US/questions/713600?page=1 Finally, finally I have excised the hated OOPP!
I run Firefox 9.0.1 and will not upgrade, ever, unless I see signs that Mozilla has radically altered its development direction and discarded most of the boneheaded, broken, anti-user development that has gone into versions more recent than Firefox 1.x. Actually making your mission statement more than an empty promise might be a good place to start.
Let's see...anything else? Oh yeah, any developer who advocates overriding or ignoring user settings, or taking control away from the user, should be kicked off the team. (and investigated as a possible Government mole, but that's a lot to ask for). I hear Konqueror and Safari are looking for new devs. It gets old fast when you try to get support and instead get haughty "You're doing it wrong, stop doing that" responses. I'm doing exactly what I intend to be doing and if you can't support that, someone else will. If you really gave a damn about your users, you might start by backporting security fixes to previous versions instead of spewing out a cacophony of incompatible new versions so rapidly you end up confusing and alienating users and making them switch updates off entirely. I mean seriously, what happens when Firefox hits triple digits? You could stick a decimal in front of it, and name that build after a historic baseball player who had that batting average. But even then you will run out of players in a few months.
It's truly sad. I switched to Firefox because it was the best browser. But Firefox has been backsliding horribly since around 2.0, and the other browsers seem to be in about the same boat. Firefox IS still the best browser - but only if you use an ancient, unsupported version. That's a big problem.

Using an obsolete version released [http://www.mozilla.org/firefox/9.0.1/releasenotes/ December 11th 2011] is the exact definition of downgrading. It exposes your system to all the security vulnerabilities that have been fixed since then.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
Out-of-process plug-ins was made mandatory on Windows Vista and later because Adobe don't test Flash Player's protected mode with OOPP disabled. This change didn't happen until Firefox 14, so there was no need to go as far back as Firefox 9.0.1.
If you absolutely have to, you can disable OOPP by creating the ''MOZ_DISABLE_OOP_PLUGINS'' environment variable and setting its value to '''1'''. Firefox must be restarted for the change to take effect. This works in the current version of Firefox, so there's no need to use obsolete insecure versions.<br>
If you don't know how to create an environment variable, see the following article for instructions (the "Using the Custom Environment Variable" section is not relevant).
* [http://www.howtogeek.com/51807/how-to-create-and-use-global-system-environment-variables/ How to Use Global System Environment Variables | How-To Geek]

HT1766 The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

Try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Office 2010 Ignores Printer Settings

I've seen this problem posted other places with no real resolution presented. - Here it is -
Ever since installing office 2010 I have several end users / customers that are unable to successfully keep print settings changed in Office 2010. The settings in office 2010 themselves work fine, but if you try to change the printer properties they
get reset as soon as you change them. An example is network MFPs that are set to B/W by default. The customer changes to color on the printer properties, but word and excel seem to ignore those settings. Acutally worse than ignore they reset
them to the default properties for the printer. If you click on the properites, change them, click ok - then before printing I click on the properties again and they have already been reset. This is a big issue for several customers - they need
to access the properties to set to color, change other settings, or use shortcut items for specific types of document printing.
Also, the problem didn't exist until they installed office 2010. They can print successfully from any other application with the ability to change any settings needed.
David

Hello all,
I think I may have a solution for your problem. The actual problem exists in office 2003 and was an easy fix but I have been ratting my brains since I started doing tech support for MFD finding in office 2010, I would see the problem know the solution but
not be able to find the properties in office seeing they move them. A client would click on print select tray 2 or options and office would seem to ignore it. My work around was to get them to print to PDF then print there item selecting the print options
they wanted through print driver properties.
In 2003 office you click File ---> Page Setup ----> then click the paper tab page and depending on your printer you will get options like
Default Print settings
Auto
Tray 1
Tray 2 etc
and a paper drop down box A4 A3 etc. This was a real problem as if it was on A4 and they where trying to print a3 selecting it through the print driver the MFD would ask for A4 paper instead of A3.
Ok so in 2007 2010 office this is where the options are causing the problem I only found it on thursday and as I dont have 2010 office at home I will have to double check these menu options when I am at another client but I should get it close enough for
you to find.
Click OFFICE icon in office word go to print, there is a rectagular box I believe it was called WORD OPTIONS or Office Options. next there is a lot of tab options, Advance is the one you want. Click on ADVANCE. Scroll right down and you will see
print and copy options.
Here you will see you overiding options
and it will be based on the print driver you have selected
Default Printer Options (Usually the one it is on) but I believe auto is what you want.
Auto
Tray 1
Tray 2 etc
Also there is a few check box options I have not played with yet but one that caught my eye that was checked was along the lines of Shrink all print to A4 I would un check this.
So this is where you problem should be solved. Please keep in mind they I only just found this out so I do need to play around with the options a little more to understand there full affect but I think what I said is pretty accurate. I will re post and edit
if I find other wise.
Something else to note. I believe having the Default Printer Options selected is the main problem. I believe this means if you are in office and you click print ---> print properties and select all the options you want it does not mean a damm,
because these word options under page setup(2003) and Advanced (2010) actually grabs the print drivers default setting i.e start ----> Control panel ----> printers and device then what ever options are set there will overide all other options you set
in the print driver from word.
I have only played with this on 2010 in word, did not check if the options are there for excel and access but I guessing its standard. Have fun let me know how you go.

Aperture ignores the settings Picture Control of my camera

Hello.
I am a professional photographer. I would like to use Aperture 3 in my professional career, but I can not because of this problem: When I import files from my Nikon D300 to Aperture, the program ignores the settings Picture Control of my camera. As a result, I can not use the potential of my camera. This forces me to do extra steps that take time. The recommendation not to use the Piсture Сontrol in my camera and use the presets and settings from Aperture no good for me because I dynamically change both standard and created by myself Picture Control settings directly at the shooting.
How to set up Aperture to read and save settings Picture Control from my camera?
Sincerely,
Ulyaschenkov Nikita

I have no doubt that you would say.
Blame Nikon?
Will the aperture to solve this problem in the future? I hope so.
I do not think this problem is an unsolved problem.
Of course, if the Aperture will want to do it. If the Aperture has a desire to get better and better.

I open the ipad and get the icloud symbol. it says ignore or settings. no matter what i hit nothing happens. HELP

I am having problems with my new ipad. when I open it I get the icloud backup symbol. it says ignor or settings. But no matter what button I hit ---its frozen. nothing happens and I cannot get out of this. I cannot open it to anything??? HELP

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

HT1766 I have a pop up about Photo stream which does not allow me to click ignore or settings - nothing happens when pressed........I cannot click on anything - the screen seems to have frozen and having tried to turn off I cannot slide to turn off. Plea

I have a pop up about Photo stream which does not allow me to click ignore or settings - nothing happens when pressed........I cannot click on anything - the screen seems to have frozen and having tried to turn off I cannot slide to turn off. Please can e frozen and having tried to turn off I cannot slide to turn off. Please can you help

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Printing Ignores Print Settings

Our mac seems to be ignoring printing settings and preset settings. We keep a black ink only fast draft setting for normal printing because it is fast and saves ink. However, all applications seem to be defaulting to High Quality, Photo Paper, Full Color, regardless of what is selected in presets. We have to select another preset, and then reselect our draft preset for the changes to stick in the print window. Then, sometimes the application will print according to our settings, and other apps just print in high quality full color anyway. This is a real time and money waster. Any suggestions?

Hi,
Please check below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/d9/4a98ad51ea11d189570000e829fbbd/content.htm
Anil

My iPad screen is totally frozen with a message box asking me to go to photo stream settings but when either option (ignore or settings) is selected nothing happens. I can't turn off the device either because the screen won't respond. Help please

My iPad screen is totally frozen with a message box asking me to go to photo stream settings but when either option (ignore or settings) is selected nothing happens. I can't turn off the device either because the screen won't respond. Help please

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

Icloud window is frozen i unable to hit ignore or settings

icloud window is frozen on my ipad i am unable to hit ignore or settings on ipad

You need to restart the phone, hold the Sleep and Home button down for 10 seconds.

TS3988 iPad is locked up with iCloud backup window. The ignore and settings buttons do nothing. It is like the iPad is locked up

iPad is locked up with iCloud backup window. The ignore and settings buttons do nothing. It is like the iPad is locked up

If you are unable to cancel or power down, try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

WRV200 Ignores DNS Settings

Hi all,
I have recently got my VPN to work working however I need to get works DNS in. I have configured these in the interface manually and it just ignores the settings and gets standard ones. Is their a way i can either:
1) Assign the DNS of work on my local machine
OR
2) Force it to read this setting?
I have upgraded to the latest firmware and I can ping my router from my work machine, just not the other way round.
Cheers
Mat

Hi… Are you able to ping to the WAN IP address at the office? If not, then you office router does not allow you to ping. You need to check that out with Network Admin at your Office. About the DNS servers, Once your VPN is established, your DNS settings will come into picture and you would then be able to test if the router is able to communicate with this DNS or not. Without the VPN connection, assigning a DNS server would have no effect whatsoever. If you assign a DNS server in the Static DNS settings on the router it should work. If not you can simply assign a DNS server on your PC. In that case you would need to assign one DNS server from ISP and second one be the work DNS.

I changed my password and it updated on all of my devices except my ipad... Now I get this error message from icloud saying icloud backup cannot access my account... There are two options: ignore or settings

Error message: icloud unable to access my account... I changed my password, this is the message on my ipad. gives me two options: ignore/settings... ipad not responding to either... ?

Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Text box ignores spacing settings.

Using the tooltip widget. Put a text box inside the trigger. Set left, right, and bottom spacing.
Right spacing is ignored.
Removed spacing and used left and right margin instead (in text settings), this worked fine.
See attached images, showing how the right spacing is ignored. The left trigger uses margins and the right trigger uses spacing.

That is due to a bug in Acrobat 9 where multiple carriage returns get replaced by a single one. It's still present as of 9.4.0, but I'm not sure about more recent updates.

Aperture 3.1.1 ignores color settings in Canon 7D .CR2 Raw files

hi there!
i have a problem with the import of pictures taken with my canon 7d.
when i take pictures using color presets e.g. black/white, aperture ignores those completely during import. even if i open them in preview.app the settings are not applied. if i open the same picture in photoshop cs4 it will be displayed correctly in b/w.
neither the updated of the raw processing (http://support.apple.com/kb/HT3946) nor the 3.6 raw update solved this problem for me.
how can i fix this?
thanks,
paul

hmm, this behaviour of aperture is a bit odd.
i understand the approach but if i shot a few thousand images on a journey, i don't remember afterwards, which image was supposed to be b/w. this leads to a situation where i +have to post-process+ images. i would expect aperture asking me if i want to keep attached color settings instead of ignoring them!
and, yes, i'm sure that this image is a raw. photoshop interprets the color settings correctly.

AD Splice ignoring tablespace settings

Similar Messages

Maybe you are looking for