AD to OID sinchronization stops after migration to new AD

Hi,
we have Oracle Internet Directory (Oracle directory manager v. 10.2.2.2.0) running on Windows Server 2003 sp2 with Oracle AS (v. 10.1.2.2.0), connected using LDAP to AD domain controller on Windows Server 2003 sp2 for a few years now.
So far so good, but our environment will be upgraded to AD Windows Server 2008 R2 (x64).
When I change "Connected Directory URL:" option in Oracle Directory Manager from old AD t new one, sinchronization stops. There are no errors in logs, Sinchronization status is "Successful", but the only thing i can see is that "Last Applied Change Number" remains the same all the time, and changes in BASE is not visible in AD!
Here is content of C:\Ora\INF\ldap\odi\log\xxx.trc file while set to sinc from old AD:
Trace Log Started at Tue Jan 11 09:50:13 CET 2011
Updated Attributes
orclodipLastExecutionTime: 20110111095013
orclodipConDirLastAppliedChgNum: 646178626
orclOdipSynchronizationStatus: Synchronization Successful
orclodipLastSuccessfulExecutionTime: 20110111095013
Trace Log Started at Tue Jan 11 09:51:13 CET 2011
Updated Attributes
orclodipLastExecutionTime: 20110111095113
orclodipConDirLastAppliedChgNum: 646178652
orclOdipSynchronizationStatus: Synchronization Successful
orclodipLastSuccessfulExecutionTime: 20110111095113
Trace Log Started at Tue Jan 11 09:52:13 CET 2011
Updated Attributes
orclodipLastExecutionTime: 20110111095113
orclodipConDirLastAppliedChgNum: 646178652
orclOdipSynchronizationStatus: Synchronization Successful
orclodipLastSuccessfulExecutionTime: 20110111095113
And here is content of C:\Ora\INF\ldap\odi\log\xxx.trc file while set to sinc from NEW 2008 R2 AD:
Trace Log Started at Tue Jan 04 15:00:47 CET 2011
Updated Attributes
orclodipLastExecutionTime: 20110104150047
orclodipConDirLastAppliedChgNum: 391243683
orclOdipSynchronizationStatus: Synchronization Successful
orclodipLastSuccessfulExecutionTime: 20110104150047
Trace Log Started at Tue Jan 04 15:01:47 CET 2011
Updated Attributes
orclodipLastExecutionTime: 20110104150147
orclodipConDirLastAppliedChgNum: 391243683
orclOdipSynchronizationStatus: Synchronization Successful
orclodipLastSuccessfulExecutionTime: 20110104150147
Trace Log Started at Tue Jan 04 15:02:47 CET 2011
Updated Attributes
orclodipLastExecutionTime: 20110104150247
orclodipConDirLastAppliedChgNum: 391243683
orclOdipSynchronizationStatus: Synchronization Successful
orclodipLastSuccessfulExecutionTime: 20110104150247
Does anybody have any idea, where is solution of my issue?
Thanks.
Edited by: user11294763 on 11.1.2011 1:14

OK, we solved this issue, but I am not sure exsactly how :)
1st. - we did solved the second issue mentioned above - that one with SSO. We solved that with patches on DC 2008r2 side, following instructions at:
a. http://www.windowsitpro.com/article/kerberos/Q-Can-the-default-encryption-types-the-Kerberos-authentication-protocol-uses-in-Windows-7-and-Windows-Server-2008-R2-cause-compatibility-problems-Is-there-a-workaround-.aspx
b. http://support.microsoft.com/kb/977321
c. http://support.microsoft.com/kb/978055
2nd. - my first problem was solved after second one, when I followed the instructions here:
http://www.oraclegiants.com/Active-Directory-OID-Integration.htm
First of all I changed LDAP server IP with 2008r2 one in Oracle Directory Manager, than test connection at step 1 was success, skipped step 2 (because I already had profile), and then runned bootstrap at step 3 with success. After that everything works just fine :)
I hope that, this will help someone.
Regards,...

Similar Messages

Unable to open indesign after migration to new mac all other programs open and work.

Unable to open indesign after migration to new mac all other programs open and work. Why? Running Yosemite 10.10.1 Indesign CS5

The keyword is "migration." Migrating or copying files for Adobe applications usually does not work. Not all of the necessary subsidiary files are copied to the right location.
You'll need to first clean up the mess with this tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download an installer from here:
Other downloads

After migrating to new Mac iCal pop-up screen is mostly off screen ...

After migrating to new Mac iCal pop-up screen is mostly off screen and I can't seem to find a way to get it so that it pops up in the middle of the screen or anywhere else where I can see the whole thing.

This is a known bug which began to occur with the 10.4.8 update. I suggest you file a bug report with Apple. Its quite annoying and hopefully, the more people who contact Apple about it, the more importance they will give to fixing the problem.

After migrating a new Mac Book Pro from Time Capsule, I noticed that I lost a group of Favorites on the older iMac. The puzzling thing is that the Favorites are on my iPhone--not the old iMac or the new Mac Book Pro. How do I get the Favorites back?

After migrating a new Mac Book Pro from Time Capsule, I noticed that I lost a group of Favorites on the older iMac. The puzzling thing is that the Favorites are on my iPhone--not the old iMac or the new Mac Book Pro. How do I get the Favorites back?

If you are syncing using iCloud, try going to System Preferences/iCloud (computers) and checking Safari. If it is checked, try deselecting it, wait 10-15 seconds, and then check it again.

Question: How do I open CS5.5 after migrating to new laptop w/ Mac OS 10.8.4?

question: How do I open CS5.5 after migrating to new laptop w/ Mac OS 10.8.4? I received a dialogue box stating I needed to run Java SE runtime (or something to that effect), when I ok'd it, and try to open cs5.5 Indesign, the program quits on startup. If I uninstall program & reinstall, will my documents be unscathed, or are they toast? Help!

Hi Art Bunny Rabbit,
Migration from one machine to other causes problem most of the time. So I recommend you to reinstall the software. Done worry none of your documents will be effected.
Regards,
Romit Sinha

ActiveSync is not working properly after migrating to new Exchange 2013 SP1 server?!

Few weeks ago we have added new Exchange 2013 SP1 onto our existing Exchange 2007 environment. I have migrated my mailbox to the new Ex2013 server. Everything (send/receive - internally/externally, OWA, OutlookAnywhere) for me and the existing Ex2007
users works fine. The only thing I have trouble with is the ActiveSync! After migrating to the new Ex2013 server my phone stops getting new emails…, existing Ex2007 users don’t have any problems with their mobile phones.
I did ActiveSync test for my user account with ActiveSync Tester and here is what I have:
As you can see from the error above ActiveSync Tester detects ActiveSync on Ex2013 server however something wrong there with form-based auth?! I can’t see any differences in settings for ActiveSync virtual folders in Ex2007 and Ex2013
virtual folders?!
What I’m missing here?! Please help.

Check if the Exchange Servers group does not have the appropriate permission to the mailbox object in Active Directory.
To check whether inheritance is disabled on the user:
1.Open Active Directory Users and Computers.
2.On the menu at the top of the console, click View > Advanced Features.
3.Locate and right-click the mailbox account in the console, and then click Properties.
4.Click the Security tab.
5.Click Advanced.
6.Make sure that the check box for "Include inheritable permissions from this object's parent" is selected.
Ref:
http://technet.microsoft.com/en-us/library/dd439375(v=exchg.80).aspx
Also check the Virtual directory authentication
Microsoft-Server-ActiveSync
•Basic authentication
•SSL required
•Requires 128-bit encryption
Ref:
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
Check the IIS log if you are able to find any error message on it
Exchange Queries

Aliases failing after migrating to new disk

I migrated from my original 500GB disk to a new 1TB disk by using Disk Utility's "Restore" function. For those of you that are not familiar with Restore, it should be the highest fidelity form of coping a partition given that it does a "block copy" - e.g. it copies the data byte-by-byte instead of doing a file based copy. Also it verifies after the copy is done. In my opinion, it is the gold standard for copying an entire partition.
The new disk booted up fine, but I was surprised to find out that about half of my 190 aliases were broken. When I looked inside the alias files themselves I saw that they contain a lot of data, including a path to the target file. In all cases where the aliases stopped working on the new drive, this path was not correct. In other words, I had moved the target file on the old drive before cloning the whole partition onto a new drive.
I reinstalled the old drive and verified that all my aliases were in fact functioning so this was not an issue in on the source disk. The aliases were able to work properly even with outdated path data in them.
After doing some reading on how OS X aliases work, I found out they use multiple ways to find the target file. If the path inside the alias is not good, OS X has other means to find the original target file. But somehow this broke after copying to the new disk.
So the question is if there is a way to force aliases to get refreshed so that all their data is correct? In other words, before I do a migration to a new disk, can I run some command that causes all the aliases on my existing disk to be resolved to their targets and then have the contents of the aliases be made fully consistent with that resolved target data. This would fix the broken paths in the aliases which would allow them to work after the migration to the new disk.

Try this:
Make a folder on your destop called F.
Inside folder F make two subfolders called A and B.
Inside A create a text file called T.
Now creas an alias to T which we will call T.alais.
Test out T.alias. It should open T.
Now move T to folder B.
Again, test out T.alias. It should open T even though it has been moved.
Now use CCC to copy F to another disk.
Delete the original F and empty the trash.
Now try to open T.alias. It will fail.
The reason it fails is that you moved the target of an alias (from A to B) then copied the whole thing (both alias and target) to a new disk.
I just tried it and it failed for me.
This is what happens to me en-mass when I move from one disk to another.

Time machine after migration to new mac - problem

After migrating all of the data from a MacBook Pro to a new iMac 27, I discovered a glitch in the Time Machine backup. I kept getting error messages that Time Machine could not back up 560 gigs but my new machine had only 160 gigs on the hard drive for backup. After discussions with the hard drive manufacturer, and an Apple representative, I read on the forum about backing up multiple hard drives. This gave me an idea, and sure enough, I have two additional hard drives daisy chained to the backup hard drive. Apparently Time Machine was also trying to back up the two additional hard drives (which I use for additional backups). After excluding those two extra hard drives in system prefs under Time Machine options, the problem went away. Now for the first time in a few years, Time Machine is backing up only my primary computer.

Sorry, I was posting this for anyone who had a similar problem. I solved my own question - dufus as I was - and posted this for the edification of others.

After migrating to new Mac Pro Dreamweaver won't launch, says missing menus.xml file. How do I resolve this?

After migration to a new Mac Pro Dreamweaver CS6 won't launch. It says it is missing menus.xml file. How do I resolve this?

Hi rustyg12,
Go to Applications/Adobe Dreamweaver CS6/Configuration/Menus/menus.bak
You'll see a menus.xml there - it is a backup copy of the actual menus.xml file that DW uses.
Copy it from that folder, paste it 1 level above (in Menus folder).
Fire up DW. See if it works.

Aperture asks for original serial number after migration to new MAC

After migrating my software and files from my iMac to a new Mac Mini. Aperture asks for serial number first time I wanted to use it. Will not accept the serial number from either my first, Aperture 2 version of my Aperture 3 upgrade. I believe I never had version 1 - can't find amongst my software collection. Website support doesn't seem to allow me to display the software dtails I have registered with Apple over the years. How can I get this information?

Try Troubleshooting Professional Application Serial Numbers and if that doesn't help see Pro Application Replacement Serial Numbers
Apple support has been pretty good in the past suplying new serial numbers with the bare minimun of documentation.
good luck
Message was edited by: Frank Caggiano - reading your post it is not clear but if this version of 3 is an upgrade from 2 you will need both serial numbers. First enter the serial number from version 2 then the number from 3
regards

Outlook prompts creds after migration, unless new windows profile created

HI!
Outlook keeps prompting credentials after migration for some users. When we create new windows profile for this user, all going well. Autodiscover in browser also keeps prompting for password.
I checked credential manager (there are no passwords stored), also tried new outlook profile (no help).
Any ideas?

2010 SP2 migrated to 2010 SP3. We already tried changing authentications. The problem occurs for random users (not all users). Auth settings on autodiscover virtual directory: Anonymous, Windows, Basic. Auth on exchange (get-autodiscovervirtualdirectory):
Basic, NTLM, WindowsINtegrated.
Also i did not mention early - the problem obviously with autodiscover. I can't get autodiscover.xml using browser (keeps prompting for credentials). From another winows profile on the same computer with the same mailbox all going well. So I don't understand
where should I look to.

Major permissions problems after migrating to new iMac

Hi, I am very new to this and need some help. Have been using a MacBook pro for the past year to synch iPods/iPads that are used within our school. Purchased an iMac and proceeded to migrate users/files etc. After migrating I have had major problems with iTunes. My iTunes library is visible but I cannot synch any devices, have tried verifying permissions and fix permissions but to no avail. Any help would be very much appreciated.

Did you instal the program again, or try to migrate it from the old system (not a good idea)? I would run the installer again and it should correct the problem -- the Proximity dictionary for English (and probably others) is apparently not installed correctly.

Startup slow after migration to new MacBook Pro

startup slow after migration of 2008 MacBook Pro to 2014 MacBook Pro

That crash is citing an issue with a ColorSync profile - the AdobeRGB1998 one.
Try launch ColorSync Utility and see if you can repair it.

Duplicates after migrating to new imac

I recently bought a new imac. Migrating from my old Power PC G5 to new imac went smoothly apart from itunes.
On my old imac i stored all my music on an external hard drive. I thought that after migrating all I would need to do would be to plug this external hard drive into my new imac and all would be fine. Sadly not - every track had the small exclamation mark on it. Believing this was because it could not find any of the music I went File>Open Library and selected everything in my external drives music folder. Now instead of replacing all those files with exclamation marks next to them I have duplicates of everything - and annoyingly the music files I want to keep, the ones with the ratings and play counts, are the ones with the exclamation marks (ie the ones that cannot be found).
Is there a solution to this or do I have to manually go through my entire library deleting the duplicate and then finding each individual track. I have 95GB of music so that may take a while!
Any help would be wonderful.

Johnny Dee wrote:
Thanks Jolly
glad i could give some pointers
itunes won't let me download CDs
when you say download, i assume you mean import CDs ?
went through to Get Info on itunes app and applied "read and write" but still won't allow
try this tip by *Chris CA*
+Quit iTunes.+
+Open a Finder window.+
+Go to \Music\ folder.+
+Right click the \iTunes\ folder and Get info.+
+Go to the Sharing & Permissions tab.+
+Make sure your username has Read & Write privileges.+
+Directly below are + and - signs next to a little gear with a down arrow.+
+Click the gear and select Apply to enclosed items.+
+Open iTunes then try again.+

How to re-associate tracks after migration to new machine?

A friend just got a new iMac, and is slowly trying to manually migrate her data over. I told her to just copy her iTunes folder from her backup into her Music folder on the new machine. Problem is, when she launches iTunes now, it can't find her music...
I'm guessing it's because she was pointing iTunes on her old Mac to her external drive where all the music was stored. So when she copies that directory to the Music folder on her new machine, it's still looking for the music on the external, right? How do we rectify this issue? Go ahead and point iTunes to the external drive on the new machine, then tell it (via Preferences) to use her Home Music folder as the music repository? Would it then allow her to copy the music over, and keep track of the moved files?
All very confusing, but I'm sure thousands of others have run into this issue before as well. What's the solution?
Thanks,
John

Trying to re-instal my email history the 'Mail Message Import' dialogue screen says: 'Mail needs to import your messages. This might take a few minutes. You won't be able to use Mail until the import is finished'.
The problem is: after importing 5,000 messages it stops and the 'Time remaining' only keeps adding up to many hours (17 hours). There are almost 80,000 email messages in my Time machine backup.
How to get this working? I am even prepared to give up my email history if i can only get my 'Mail' application working again.

AD to OID sinchronization stops after migration to new AD

Similar Messages

Maybe you are looking for