Adaptación web a tamaño navegador
Hola,
He terminado una web en Muse y me ha surgido un problema, cuando cambias el tamaño del navegador de máximo a una ventana determinada, la web no se adapta al tamaño de la misma.
¿Alguien sabe como se puede indicar en Muse para que así lo haga?
He leido que se puede hacer cambiando valores absolutos por porcentuajes en todas las etiquetas width y height, como se podría hacer en Muse?
Hola,
Actualmente Muse solo permite usar medidas en pixeles por lo cual tus diseños siempre serán fijos, es probable que en una versión futura puedan usarse porcentajes.
Similar Messages
-
MiniTOC does not appear in translated source file
RoboHelp 8.0.2
WebHelp Output
I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
I have no clue how to resolve this issue. Sample code and screens are listed below.
Donna
English Source
<h1><a name="Top"></a>Working with Web Ordering</h1>
<p>This topic explains how to generate and maintain NAPA and Factory orders.
(Special orders and Non NAPA orders will be available in a future release).
You perform these tasks on the <span style="font-weight: bold;">Order
Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
> Web Ordering</span> from TAMS II BackOffice.</p>
<p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
</span><span>topic</span> for instructions on common functionality such
as sorting data.</p>
<?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
<p> </p>
<h2>Adding a New Order</h2>
<p>Follow these instructions to create a new purchase order:</p>
French Source
h1><a name="Top"></a>Utiliser le module de commande en ligne</h1>
<p>Cette rubrique explique comment créer et gérer des commandes NAPA et
d'envoi direct. (Les commandes spéciales seront disponibles dans une version
future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;">Gestion
des commandes</span>. Cette rubrique suppose que l'utilisateur est connecté
et que la <span style="font-weight: bold;">Gestion des commandes</span>
a été lancée à partir de la page de renvoi de TAMS II. </p>
<p>Voir : La rubrique <span style="font-weight: bold;">Survol de l'interface
Web de TAMS II</span> pour des instructions sur les fonctions courantes
comme le tri des données.</p>
<h2>Ajouter une nouvelle commande</h2>
<p>Suivre les instructions ci-dessous pour créer un nouveau bon de commande :</p>The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.
-
Hola a todos:
Necesito simular el boton de Atras y Siguiente del navegador
en una web
desarrollada en flash. Me explico: cada vez que pulsamos
cualquier opción
del menú de la web, ésta carga distintas
películas swf, por lo cual no
podemos movernos a través de los botones del navegador
Atrás y Siguiente.
Quisiera de alguna forma que se guardara el itineraria
seguido por el
usuario, y poder realizar la misma función que los
botones de Atrás y
Siguiente, a través de dos botones de flash.Puedes crear dos variables. En una almacenas las
películas visitadas ordenadas
de más antigua a más reciente. Creas una
función que te permita navegar por esos
registros. Cuando pulses el botón de atrás vas
cargando en pantalla la penúltima
visitada (supuestamente estarás en la última). A
medida que vayas accediendo a
películas natiguas, vas rellenando la otra variable, que
será la que te permita
"ir hacia delante". Algo así como el comportamiento de
los botones del navegador
"Juanma González .:. Dep. Creativo Prodigia Consultores
S.L."
<[email protected]> escribió en el mensaje
news:f0sl7p$s4g$[email protected]..
Hola a todos:
Necesito simular el boton de Atras y Siguiente del navegador
en una web
desarrollada en flash. Me explico: cada vez que pulsamos
cualquier opción
del menú de la web, ésta carga distintas
películas swf, por lo cual no
podemos movernos a través de los botones del navegador
Atrás y Siguiente.
Quisiera de alguna forma que se guardara el itineraria
seguido por el
usuario, y poder realizar la misma función que los
botones de Atrás y
Siguiente, a través de dos botones de flash. -
he re - hecho el sitio varias veces y por un tiempo esta todo bien, pero de un momento a otro se genera este cambio en el sitio y no se cual sera la solucion, si alguien la tiene agradeceria mucho la comparta, gracias
¡Buenas noches!
Sólo para su información, también hay un foro de habla española, que dice "Foros de usuario a usuario":
http://forums.adobe.com/community/international_forums/espanol?view=discussions
Todo lo mejor!
Hans-Günter -
Trabalho como programador web tanto em windows como em mac, sendo este segundo sistema ainda muito recente para mim.
O que sucede, trabalhando em windows com dreamweaver após salvar um ficheiro com alterações no HTML ou CSS fazendo F5 este atualiza de imediato com as alterações realizadas. No mac em vários browsers testados mesmo em ambas teclas de atalho (cmd + R ou cmd + shift + R) este não atualiza de imediato, tenho sempre de esperar vários segundos ou até mesmo mais de 1 min.
Existe alguma alteração nas preferências que possa realizar para resolver esta situação?Também sou usuário de Mac e não tenho enfrentado esse problema, a pagina é atualizada instantaneamente. Como o problema acontece com outros navegadores também, verifique as suas configurações de conexão, possivelmente o problema está aí.
command + R = atualizar a página (instantaneamente)
command + shift + R = atualiza a página sem usar o cache (demora alguns segundo, mas é muito rápido também) -
Office web apps server 2013 - launching search on loading page
Hello!
I use Office Web Apps Server 2013 for viewing documents on internal portal (it is not SharePoint, and documents is read only) with automatic generating links. Links are generated according instruction
on http://<OWA host>/op/generate.aspx (for example, http://<OWA host>/op/view.aspx?src=<path to file>).
I have some questions:
1) In some cases, when a document is openedI want
immediately start the search with some terms.
Can I give terms
to search in url params in generated url? For example, http://<OWA host>/op/view.aspx?src=<path to file>#search=<terms>?
Is there any other
way to run a search on page load?
2) I want to use multi-term search (when my search query is 'tame tamed taming', and
all individual words ('tame', 'tamed', 'taming')
are highlighted in document).
Is there a way to do it?
3)I want to use whole-word search (when my search query is'act', and words 'practice' or 'action' are not
highlighted in document).
Is there a way to do it?Hi Jazzy.em
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues about
apps for Office. Since the issue is more about Office web app, I suggest that you get more effective response from
Office 365 forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem watching trailers in Apple Web Site only
hi,
suddenly i have an odd prolbem in watching trailers at Apple's web site.
when im loading a trailer, it just indicating that the trailer is loaded and nothing happens, and the QuickTime Player is not even starting.
i have the latest version of quicktime, flash and shockwave and in other web sites i succeeded playing trailers , its only reproducing in apple site for some reason.
when i double Clicked on the bottom of the IExplorer to see Error messages,
i saw some quicktime error however i don't know if this error is related to the problem. the Error Message is : AC.Quicktime is null or not an object.
by the way, i don't think that this is the cause but im using Iexlporer 6 and not 7.
waiting for your reply,
A.TAmir, I'm also having a similar problem with watching trailers on Apple's site. I've tried with many of them.
Clicking on the "Small" button under "Standard" plays the movie fine inside of the browser. Clicking "480p" under "HD" takes focus away from the browser after a few seconds (and I can see QuickTimePlayer.exe appearing in Task Manager), but then nothing happens. The process, after a bunch of initial activity, just sits at zero CPU, going up to 2% periodically, as if checking on something. The player window never appears.
Here's what is more strange: if I click on the same trailer link again, it somehow kicks QuickTimePlayer.exe in the butt and soon two players will appear, one for each time I clicked. I've even tried this with other trailers, and clicking on the second one is (so far) a sure way for the player to finally do something besides sit in memory.
I'm using Windows XP Pro SP2 and QuickTime 7.6. I've tried with both Internet Explorer 6 and 7, and there's no difference in the behavior of the QuickTimePlayer. Other .mov files on the hard drive (like the sample.mov in the Program Files\QuickTime directory) play instantly. The QuickTime plug-in for IE still works for .mov files on other sites and other media (.aiff, etc.)... just not for the movies on Apple's own site
I haven't seen any warnings/errors, JavaScript is on, and I'm accepting the Active X notification on Apple's site.
What is wrong, I wonder? -
How can I stop Quicktime movies opening my web browser?
Sorry if this has allready been brought up but I spent an hour searched the forums for an answer (And longer on google).
My issue is that certain unsavory people seem to be exploiting an ability of quicktime to launch the default web browser and goto a page they designate. This unfortunately mean often I will download a movie (Named something it isn't typicly), run it and suddenly have 10 internet explorer windows pop up opening assorted **** sites, sites demanding spyware and malware installations and on at least one occasion site containing scripts to automaticly install a virus on loading.
I'd like to how I can prevent this from happening short fo outright not using quicktime. Is there an option to disable a movies ability to link to web pages or a feature to block their attemtps to do so?
Thanks.No. I don't have any viruses or spyware and I havn't been hijacked either. Look a little background on me, I work in tech support dealing with such issues for a living. Regardless I've had this happen on brand new computers I've set up and for the sake of been thorough in eliminating that idea as a possibility I followed every step and recommendation your links gave me and they turned up nothing.
The problem is a function of certain .mov files which basically activate an imbeded hyperlink within the file, opening the default browser and loading whatever site the link lead to. If I could find a tame one that didn't send you to pornographic sites etc. I'd be happy to host it for you to test out yourself but frankly the only .mov files I've seen that do it are usually **** films themselves named something else (For instance one was named SydneyOlympics2004Opening) with the intention of luring unsuspecting victims into downloading them and running them in quicktime forcing them to load all these malicious pages. It's fine for me on my home network where the security settings are setup so hazardous sites can't actually do anything and the addition of pornographic images to my temporary internet folder has no concequences but at work that could get you fired and heavily fined in goverment employment.
On a side note how another program could respond to a .mov file playing in quicktime opening web pages specific to that file and at set points in the movies timeline is beyond me. It would have to be a plugin for quicktime. -
OS authentication via Web interface (Intranet) possible?
Hi,
I have database users that have access to iFS too. The database users are OS authenticated. It anoyes them, that contrary to the standard explorer interface, the Web (IE) interface requires them to type in their OS password.
I did not find any means to let iFS authenticate the users accessing iFS through the intranet (NOT internet). Perhaps this is a foolish thing to expect, I do not have too much knowledge of what the IE browser knows or do not knows of the user using it.
Can this be done? Perhaps with a custom built web logon?
TIA,
Tamas SzecsyWhen you say that your users are OS authenticated - does OS stand for Operating System?
Do you mean that you're using the NT directory services to authenticate users when they log into the client machines?
When you say that they are also database users, do you mean that they are also using other Oracle database applications?
In any of these cases, Oracle 9iFS does not currently support Single Sign On, but this is a requirement that we are considering for a future release.
The Oracle Single Sign On server would enable applications to share credentials so that a user would log in once to one application,
and subsequent SSO applications would look up the authenticated credentials instead of making the user log in again. -
Polycom CX 600 - Certificate web service cannot be found
Hi All,
I know, there are some same issues in the forum, bot those are not helpful for me. My problem is the same, via network cable (using just DHCP) the Polycom CX 600 Lync Phone are not able to sign in (however 1 month ago it was), returning the error message:
'Certificate web service cannot be found.'
I've double checked the DHCP options and all of them are OK! We are not using Windows DHCP, but the options are right, the 43 option containing the proper hexa value, the sub-options are also valid. From the DHCP log I can verify that the device got the
options, but the phone still not able to sign in.
From the browser I cannot open the device, by it's IP, just with FTP:\\'IP'. There I could find a .clg1 log file, but it not containing useful information for me.
This is the link of the log file: http://speedy.sh/XAgMT/system.clg1
If I run the DHCPUtil.exe -emulateclient on my workstation, I got the following:
Starting Discovery ...
Result: Failure = -2147014848
Or... sometimes it has a result:
Starting Discovery ...
Sending Packet (Size: 288, Network Adapter: 57.56.69.138, Attempt Type: Broadcas
t + Unicast)
--Begin Packet--
DHCP: INFORM (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = E0DB55DE###--End Packet--
Received Packet
Sender:57.20.120.85:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.131
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.85
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.85:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.130
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.85
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.131
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.130
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Result: Failure = 1
I don't know what is that Failure = 1
Has anybody an idea???
Many thanks,
TamásHi,
The DHCP options are good.
Finally, I was able to run the test-csphonebootsrap cmdlet, and I got the following error:
Result : Failure
Latency : 00:00:01.2179659
Error Message : No response received for getting root certificate chain.
Inner Exception:The remote server returned an unexpected respon
se: (417) Expectation Failed.
Inner Exception:The remote server returned an error: (417) Expe
ctation Failed.
Diagnosis :
Inner Diagnosis:Mime-Version : 1.0
X-Squid-Error : ERR_INVALID_REQ 0
Vary : Accept-Language
Content-Language : en
X-Cache : MISS from proxy.lsy.bud.dlh.de
X-Cache-Lookup : NONE from proxy.lsy.bud.dlh.de:3128
Connection : close
Content-Length : 3944
Content-Type : text/html
Date : Thu, 09 Jan 2014 13:24:47 GMT
Server : squid/3.1.10
Via : 1.0 proxy.lsy.bud.dlh.de (squid/3.1.10)
VERBOSE: Workflow
'Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow'
started.
Workflow
'Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow'
completed in '0.0001508' seconds.
Target server Fqdn or web service Url not provided. Will have to do DHCP
Registrar Discovery.
An exception 'No response received for getting root certificate chain.'
occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow
execution.
Exception Call Stack: at
Microsoft.Rtc.Admin.Authentication.WebServicesHelper.GetRootCertChains()
at
Microsoft.Rtc.SyntheticTransactions.Activities.GetRootCertChainsActivity.Intern
alExecute(ActivityExecutionContext executionContext)
at
Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Ex
ecute(ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
ActivityExecutionContext executionContext)
at
System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRunti
me workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Server stack trace:
at
System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(
HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory,
WebException responseException, ChannelBinding channelBinding)
at
System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChanne
lRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message,
TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean
oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
timeout)
at
System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessa
ge methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)
at RootCertChainService.GetRootCertChains(GetRootCertChainsRequest request)
at Microsoft.Rtc.Admin.Authentication.WebServicesHelper.GetRootCertChains()
'DHCPDiscover' activity started.
Starting DHCP registrar discovery...
Constructing a DHCP packet.
Adding DHCP option PARAMETER_REQUEST_LIST.
Successfully added DHCP option.
Adding DHCP option VENDOR_CLASS_IDENTIFIER.
Successfully added DHCP option.
Successfully constructed DHCP packet.
Trying to open an udp connection.
Remote IP : 255.255.255.255.
Local IP : 10.150.7.33.
\tCreating a new UDP client.
Udp connection successfully created.
Sending packet.
Remote IP : 255.255.255.255.
Remote Port : 67.
Packet sent successfully.
DHCP discovery message send. Waiting for DHCP servers to respond.
Data received successfully.
Remote IP : 57.20.120.85.
Remote Port : 67.
Response received for the DHCP Discovery message.
Constructing a DHCP packet from received raw data.
Extracting DHCP Options.
Successfully constructed DHCP packet.
Return value for DHCP option : SIP_SERVER.
Found registrar Fqdn : lyncpool.dlh.de.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.1.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.1 - MS-UC-Client.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.2.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.2 - https.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.3.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.3 - lyncpool.dlh.de.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.4.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.4 - 443.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.5.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.5 -
/CertProv/CertProvisioningService.svc.
Successfully extracted sub option value.
Found web service Url :
https://lyncpool.dlh.de:443/CertProv/CertProvisioningService.svc.
Disconnecting.
DHCP registrar discovery activity completed successfully.
'DHCPDiscover' activity completed in '1.2179659' seconds.
'GetRootCertChains' activity started.
Trying to download a certificate chain from web service.
Web Service Url : http://lyncpool.dlh.de/CertProv/CertProvisioningService.svc
Could not download certificate chain from web service.
CHECK:
- Web service Url is valid and the web services are functional.
'UnRegister' activity started.
'UnRegister' activity completed in '3.78E-05' seconds.
VERBOSE: Workflow Instance ID 'a9313cfa-b82c-4bd2-9df6-81acca1bcbbc' completed.
VERBOSE: Workflow run-time (sec): 1.5083016.
It looks like the telephone are not able to download the root CA, but the webservice is available and reachable via port 80 and 443 too.... So, what is the reason? Why the Polycom CX600 is not able to download the root CA?? -
Configuring multiple R/3 or BW instances behind TAM
We anticipate that we will have a problem when we attempt to access more than one back-end instance from the same enterprise portal when it is behind Tivoli Access Manager (TAM). Based on the way the TAM configuration, including the Junction Mapping Table (JMT), and the manner in which some back-end applications operate, we suspect there will be a problem reconciling a dynamically generated address to the correct back-end instance.
For example, we have multiple CRM instances in our landscape. We have implemented the IC Web Client through the Enterprise Portal, and have successfully configured it to work. When the back-end CRM system generates a url, it is reconciled properly because there is only one place where "/sap/..." exists in the JMT. However, because all back-end SAP instances have the same directory structures, any other CRM instance is going to generate the same url, but will expect the browser to return the request to issuing server. TAM intercepts all traffic and will only be able to route it to the first junction it finds, so multiple systems generating the same url will all be routed to one of the instances by TAM.
Has anyone encountered this? Is there anyone who has a solution? Ingo?
This issue will be a reality very soon for us, so anyone who has a potential solution please contact me.
Glenn
[email protected]Megha,
There are two options.
1. Create two WebSEAL instances as per the integration guide at "<a href="http://www-1.ibm.com/support/docview.wss?uid=swg24003605">IBM Tivoli Access Manager SAP ITS 6.1 / 6.2 Integration Adapter</a>", and configure the JMT for each TAM instance for the default ITS values (eg "/scripts/wgate" and "/sap/its"); or,
2. Change the default values of the second SAP instance in the instance's xml configuration file (ITSRegistryWGate.xml) to something other than "/scripts/wgate" and "/sap/its". Additionally, for SAP EP the default use of "/irj" can be configured to a different value.
Let me know if you require more in-depth information on either of these options. I can find the actual parameters, etc, for the files mentioned above...
Regards,
Pete. -
I followed the following step (in spanish):
Configuración de la conexión para Firefox
Si te conectas a Internet a través de un servidor proxy que tiene problemas de conexión, no podrás cargar páginas web. Para comprobar la configuración del proxy de Firefox:
1.En la parte superior de la ventana de Firefox, en la barra de menú, haz clic en el menú Herramientas, y selecciona Opciones....
2.Selecciona el panel Avanzado.
3.Selecciona la pestaña Red.
4.En la sección Conexión, haz clic en Configuración... .
5.Cambia la configuración del proxy:
◦Si no te conectas a Internet a través de un proxy (o no sabes si te conectas a través de uno), selecciona Sin proxy.
◦Si te conectas a Internet a través de un proxy, compara la configuración de Firefox con la de otro navegador (como Internet Explorer. Consulta Guía de configuración de proxy de Microsoft) (O Safari. Consulta Guía de configuración de proxy de Apple).
1.Cierra la ventana de Configuración de conexión.
2.Haz clic en Aceptar para cerrar la ventana de OpcionesHaz clic en Cerrar para cerrar la ventana de preferenciasCerrar la ventana de preferenciasYou need to allow for the loopback connection in Firefox, as an "outgoing" connection.
-
How to trigger a trigger in a Web Forms 6i from Java script
Hi,
I have an applicatin that has two frames. One displays a map, the other one the Oracle Forms 6i web forms. I display the datasheet of various map objects in the second frame when the user clicks on a map object in the first frame.
My problem is that since each Forms has a different link, JInitiator reloads each time, thus making it the form a bit slow to display.
Any tips? Thanks in advance.
Tamas SzecsyHi,
this kind of inter-region communication requires the use of contextual events in which the producer region sends a notification to the receiving region, which then uses a method to launch the popup. You don't use the showPopupBehavior for this but JavaScript from Java
See: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_adv.htm#CACJBFGI
http://download.oracle.com/docs/cd/E15523_01/web.1111/b31973/af_event.htm#BABHIBGF
Frank -
[FLASH MX 2004] Fuentes en navegador
Hola, Estoy haciendo una web que incluye una fuente poco
común, alguien me
dice como puedo hacer para que flash incluya la fuente en el
navegador. Sé
que se puede hacer pero no sé como.
Gracias, un saludo.muchas gracias por tu ayuda
un saludo
"gabi" <[email protected]> escribió en el
mensaje
news:eiio30$iqe$[email protected]..
> En la biblioteca haz click en el botón superior de
la derecha-> nueva
> fuente y escoge la fuente que estas utilizando
> salut
> Gabi
> "Victor" <[email protected]> escribió en el
mensaje
> news:eifk5o$t7h$[email protected]..
>> Hola, Estoy haciendo una web que incluye una fuente
poco común, alguien
>> me dice como puedo hacer para que flash incluya la
fuente en el
>> navegador. Sé que se puede hacer pero no
sé como.
>>
>> Gracias, un saludo.
>>
>>
>
>
> -
Error when opening page with the web browser activex
I have downloaded the example for using the web browser activeX component to display a web page. It basically works, but it keeps returning an error (from NI's web site) that I don't see when opening the site from IE. The message I get is:
Are there things that need to be initialized when calling the browser in this way?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First StepsMike,
It looks like ni.com is not supplying that particular console object which is causing an issue with the embedded instance of IE9. Every other website I've tried works correctly. I've looked around the ActiveX methods to intercept and ignore this error, but I haven't found anything yet.
For others' reference, here is the link to the example:
https://decibel.ni.com/content/docs/DOC-2042
Karl G.
Applications Engineer
ni.com/support
Maybe you are looking for
-
Why cant I install itunes on win 7
Been trying to upgrade my Itunes on my Win 7 laptop and continue to get erros. Any help on this?
-
Send IDoc parallel (MATMAS & INFREC & ...)
HI, i know that it´s possible to send "as an example" with BD10 the MATMAS and INFREC and ... IDoc parallel. Condition = flag send complete data. Can you show me how to configure that BD10 sends more than MATMAS IDoc ? thx, Gordon
-
Word order reversed for arabic locale in Flex 3
I have a "Flex Application" that uses flex builder 3. I want to add Arabic localization to this application, i.e., all the labels can be changed via ResourceBundle. I succeeded to see Arabic letters however the word order is reversed. Namely, the lab
-
Find my iphone... wipe pending
My phone was stolen which I reported to my network / O2. I attempted to find the handset using find my iphone but was unable to locate it. I tried to wipe the data and that remains pending (5 days now). I also set up a 4 digit key-pass which it appea
-
I tried to purchase some $0.69 songs, and when I went to buy them, a message appears that says the price is now $1.29. Why does the discounted price show when it is being billed at the original price?