Adapter activate

Hi XI gurus
    please help me in resolving this issue
   I am getting this problem that " adapter is inactive" how to over come this
    i check in adapter configuration i.e when creating communication channel there the adapter status is active . In RWB under component monitor also adapter engine is in green color but integration engine is in red color.how to activate this & make adapter active
how & where we active and deactivate these adapters. Actually i need to run this interface weekly once .At run time it has to be activate rest of the time it is deactivate for performance improvement as we are running too many interfaces in our project .
please provide solution for this as soon as possible
thanks in advance
Regards
rao

Hi,
1. The adapter should be started in the RWB --> Comm Channel Monritoing.
2. Go to the integration directory and check the status of the Adapter against the STATUS drop down option. The status should be active. If inactive, make active and activate the comm channel.
Now, when needed you can start / stop the comm channel from RWB and you need to deactivate it at the Directory level.
Also, try to upgrade to SP 19 / Sp 10 and use the Availability Time to shcedule your adapters automatically.
regards
Bhavesh

Similar Messages

Populating MESFCT and MESCOD in IDOC control record through XI.

Hi Experts,
I want to map only MESFCT and MESCOD fields to IDOC control record as i see help.sap.com and all forums this part in XI is very confusing, as mentioned in the below thread i disabled all the mandatory fields(which are in red color) in the EDI_DC40 and mapped MEDCOD and MESFCT with constants and in IDOC receiver adapter (Communication channel) i have checked the option (Apply Control Record values from Payload) , now i can see both the values MEDCOD and MESFCT in XI payload, however I'm unable to see them in the target (ECC 6.0) system
Threads Used:
/people/sravya.talanki2/blog/2005/12/02/manipulating-idoc-control-records-from-payload
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
SAP Note : 728792
Target System
WE09
IDOC control record structure.
Under Typinfo tab:
Message Varient : <Still Empty>
Message Function : <Still Empty> not populated from XI payload.
Any guess ??? will there be any configurations required from ECC point of view to populate these values from XI payload.
Thanks in advance
Kelli.

You mentioned that the payload values are visible post mapping during runtime so ,
Try to edit the IDoc adapter once again and ensure that
you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter
Activate the adapter and try again.

File- XI- RFC (Error: Received HTTP response code 500..)

Hi,
I am working on File->XI->RFC scenario, getting Processed Successfully status in "SXI_MONITOR".
But Data is not posted in SAP R/3. I check <b>Runtime Workbench </b> Getting following Error in one step.
Can any one help me in analyzing the error.....??????
2006-06-09 14:36:32 Success output 1149888992513 Channel WEBMETHOD_SENDER_SOAPFMTEST: Send binary file "/usr/sap/transx42/data/xi_input.xml". Size 175 with QoS EO
2006-06-09 14:36:38 Success output 1149888998592 Application attempting to send an XI message asynchronously using connection AFW.
2006-06-09 14:36:39 Success output 1149888999757 Trying to put the message into the send queue.
2006-06-09 14:36:40 Success output 1149889000823 Message successfully put into the queue.
2006-06-09 14:36:40 Success output 1149889000824 The application sent the message asynchronously using connection AFW. Returning to application.
2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001577 The message was successfully retrieved from the send queue.
2006-06-09 14:36:41 Success output 1149889001591 File "/usr/sap/transx42/data/xi_input.xml" deleted after processing
2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001745 The message status set to DLNG.
<b>2006-06-09 14:37:47 Error SAPEngine_System_Thread[impl:5]_12 1149889067522 Transmitting the message to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..</b>
2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067585 The asynchronous message was successfully scheduled to be delivered at Fri Jun 09 14:42:47 PDT 2006.
2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067695 The message status set to WAIT.
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 Retrying to send message. Retry: 1
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 The message was successfully retrieved from the send queue.
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367643 The message status set to DLNG.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368435 The message was successfully transmitted to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368471 The message status set to DLVD.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368472 The message was successfully delivered.
Thanks & Regards

Hi Umesh,
I think, the reason is because of huge number messages ..
Also just go to RFC adapter, activate the adapter,refresh the cache and try it..
following guide will help you to solve problem~
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Just refresh the cache-The following guide will help you on that~
https://websmp101.sap-ag.de/~sapidb/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Refer these SAP notes- 807000,803145
(some hints)
Regards,
Moorthy

I want to install a mac monitor to a Dell Latitude PC. I bought a VGA adapter but it still won't activate.

I want to install a mac monitor to a Dell Latitude PC. I bought a VDI to VGA adapter but it still won't activate.

Easiest thing I found was to manually expand any open window you're dealing with; including a webpage. To do this look at the bottom right hand corner of the window pane itself. Just below the Up and Down scrolling arrows is a corner with 3 diagonal lines. Grab that and drag in the direction (up, down, right, left, diagonal) that resizes the window to meet your needs. Once you've done this the size will be remembered when you open the window in the future. I've learned Apple doesn't like "full screen" mode. Just as well since filling the screen with an open application hides anything else you have open. And the Dock doesn't highlight or display the open Apps. Hint: I've learned to use the F3 key a lot. That way I can see everything that I've opened and change applications.

How to activate the File Adapter

Hi All,
There is a strange problem that i am faceing now.
I am using a file adapter to push and pull the file. The problem is just before two days the file adapter was working fine but as the location for the file pushing(file location) was not correct , so it went in the HOLD status. I just cancle the queue to make it clear and then re processed the file .
The starange thing is that it is now not picking of the file , when checked the adapter monitoring, i found that the file adapter is in grey status saying "inactive Led : Component status is not defined "
So also i dont found any item (communication channel) for file adapter.
Any idea from your side will be a great help for me.
Thanks in advance.
JAY.

Hi,
When you activate or deactivate the adapter, then its corresponding services in the J2EE engine become active and inactive.
If possible try to manually activate it. Or try to do some changes in your channel and activate it.
If still this problem persist, do full adapter cache refresh.
And finally restart J2EE engine if possible.
Thanks
Farooq
Edited by: Farooq Farooqui on Aug 25, 2008 4:01 PM

How to activate soap adapter

Hi,
In Adapter Farmework Monitoring i see soap adapter i grey ,How to Activate the Soap Adapter to configure the scenario

Hi Abdul,
If your adapter has been locked or if your adapter has not yet been activated, then you can activate it by doing the steps below.
Visual Administrator -> Cluster -> server -> services -> deploy -> click on application radio button -> select the soap adapter there and click start.
Regards,
abhy

Unable to activate backend adapter

Hi all,
I'm using SAP Netweaver Mobile 7.1.
I'm trying to create some data objects defining their related Backend Adapters (using standard BAPIs).
When I try to activate them I've got always the same errors:
Only flat structures and fields of structure allowed in bapiwrapper.AD_TELNRCL-
Only flat structures and fields of structure allowed in bapiwrapper.AD_SMTPADR-
Only flat structures and fields of structure allowed in bapiwrapper.AD_PSTCD1-
Only flat structures and fields of structure allowed in bapiwrapper.LAND1-
Only flat structures and fields of structure allowed in bapiwrapper.REGIO-
Only flat structures and fields of structure allowed in bapiwrapper.AD_MC_STRT-
Only flat structures and fields of structure allowed in bapiwrapper.AD_HSNM1-
Client specific data object is mapped to client independent BAPI Wrapper
Does anyone have any suggestions?
Thanks and regards,
Laura

Hi,
Check the following.
1) In getList check whether the structure of (exporting or tables) parameter
have any non flat data types.
2) In getDetail check whether structure of (exporting or tables) parameter have non flat structure(i.e. AD_TELNRCL, AD_SMTPADR...)
3) Also check structures of importing and tables parameter of Create, modify bapi wrappers.
Note: if these structures has included any other structures, then look for non flat data types in those structures.
Regards,
Dhana
Edited by: Dhanasekhar Karuppanan on May 19, 2009 12:24 PM

Can't activate the COMPARE function for object DNL_CUST_TVAST for Adapter

Hello
I've applier OSS note 866824 to enable the exchange of the sales area flag deletion. I had to do the initial download for the customizing object DNL_CUST_TVAST but it failed because the no intial load was permitted as the data distribution was active. So I've applied note 887696 to enable the intial load for this object : I've deleted the COMPARE function for this object with transaction R3AC3. I've done the initial load for this object and now I can't add the COMPARE function : the error message is enter linked bdoc type for synchronisation load. and I don't know what to do...
if somebody can help me...
thanks a lot

Thanks for your tip but it does not work, I need to fill this field.
I just have an answer from SAP support, this value COMPARE is relevant for loading data in CDB.
there no sense to add the compare value for this object : the compare load can never be used for this object. It was a delivery error
Edited by: Jerome Munier on Dec 5, 2008 7:13 PM

Sender Mail adapter get no mails

Hello,
we are using the sender mail adapter to receive mails (IDOCS) from a Exchange server.
A few days it works, but suddenly no mails are received.
But in RWB the mail adapter status is green and shows, that there are no new mails. But when I check the mail box with OUTLOOK, there are some mails.
When I deactivate and activate the mail adapter, all mails are read then.
Pollinterval: 1 minute
XI: SP10
Who can help me are had s similar problem?
Or is it possible to stop/start the mail adapter (or the adapter engine) automaitcally (more like a workarround)
best regards
Werner Magerl

Hi All,
I chekced your responses and tried accordingly. Our basis team has given me new link now and the error message has changed. I am getting following error message.
exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state.
Does anyone have any idea what this error is?
Thanks in advance,
Devendra

Unable to activate Genius

I am unable to activate Genius since upgrading to Windows 7. Prior with Vista and iTunes 9 Genius worked fine. Upgrade to Win7 and I cannot activate Genius.
It goes through step 1 fine then goes into step 2. It pops up an error message after about a minute that says "We could not complete your iTunes store request. The network connection timed out. Make sure your network connections are correct and your network connection is active, then try again".
Well, I have been trying again later for about a month all with the same error.
I have rebuilt the library--no luck.
I CAN access and download new content from the iTunes store. I just cannot activate genius.
Options?
Here is the diagnostic test result:
Microsoft Windows 7 Business Edition (Build 7600)
HP-Pavilion GC676AA-ABA m8150n
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ECBC09B56D49EBBB
Current user is not an administrator.
The current local date and time is 2010-01-30 15:14:02.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8400 GS
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 1f7f9cc788585092f8a4d0207622ff5d
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {87E5ED95-1C2D-4E08-B471-2D2CAE68D47A}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {EB040ABD-6DE1-4A0A-90EB-6B94ECB7CF48}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {822D4B32-268D-4D10-9127-FC7AF814ABA3}
Description: USB Wireless 802.11 b/g Adaptor
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {FBB54D1F-6C23-41DD-957F-C801A6EB801B}
Description: Intel(R) 82566DC Gigabit Network Connection
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Sat Jan 30 14:43:12 2010
Lease Expires: Sat Jan 30 14:43:11 2010
DNS Servers: 192.168.254.254
192.168.254.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-01-30 15:12:04.

I finally managed to fix this problem by removing groups of songs from my library until Genius successfully started. I started removing artists beginning with A and by the time I got down to D Genius started to work. This made me think that it was related to a specific song. However, I gradually added all of the tracks back in to my library and Genius continued to update OK!! I now have all of the same songs in the library and Genius is working fine. I have over 12000 songs in my library so it may be a bug related to the number of tracks. The downside to removing the tracks (but keeping the files) is that you lose the playcount and you have to add them to your playlists again.
Hope this helps.

How to deactivate 3rd Display (TV using HDMI over Thunderbolt) on my iMac without unplugging the miniDVI-HDMI Adapter evry time?

Hi guys,
I have a question to the following setup.
I have an new iMac connected to a VGA Display and a HDMI Sharp TV (over Thunderbolt adapters)
I wanna know if there is a way to deactivate the HDMI tv (3rd Display) for example by an Apple Script?
The reason for this is that my DVB-C tv signal loses quality and you see a lot of artifacts when I plug in this TV to my iMac.
The easiest way would be to simply deactivate and activate this screen by a Apple Script button on my Desktop instead of unplugging the Adapter everytime.
Hope you can help me!

Yes, I realized it didn't list the Mac Pro, but nothing in my local Apple store does - the Genius said this is the one they give new 2010 Mac Pro owners, and packaging was created prior to the release of new Mac Pros and 5770s.
I have headphones plugged into the front panel, but I do already have one of the stereo 1/8" to phono cables and this is a reasonable option, although another cable running to the TV doesn't thrill me due to the layout of my home office. But thanks for the suggestion - I may well end up doing this.

Mini DisplayPort to HDMI Adapter by Belkin for iMac 2009 failed to work

This is an SOS message. I have purchased another Mini DisplayPort to HDMI Adapter and I have iMac (27-inc, Late 2009) running OS X Yosemite (Version 10.10.1). I have carried out the connection of Mini DisplayPort to HDMI adapter to LG Plasma TV Screen, but there is no sign of any of the equipment reading or aware of the connection. Is there anybody out there who can help me make it work? Also, why is that Yosemite - System Preference, click on Displays does not contain - Arrangement? I'll greatly appreciate any useful tips from the community or apple support team.

Eric has helped in providing in dept understanding around the subject matter, but unfortunately, it has not provided the solution to the problem.
The Mini DisplayPort to HDMI Adapter when connected to the external Plasma TV screen, nothing happens. The System Preferences was accessed -and the Displays monitor sign was clicked, but it only showed - Display/Colour, which according to the instructions / descriptions contain in the - Video Troubleshooting Internal and External Monitors literatures and video, there seems to be missing - Arrangement / or AirPlay from my OS X Yosemite version.
The above is the version of OS X Yosemite - showing on my *iMac when clicked on System Preferences, and as result I have not been able to make the Mini DisplayPort to HDMI Adapter to LG Plasma TV Screen to work.
My *iMac is -
iMac (27-inch, Late 2009)
iMac10,1
(10.10.1)
MB952XX/A
Running OS X Yosemite
When the above image is compared with the following image below, there is definitely something missing and it’s probably affecting the Mini DisplayPort to HDMI Adapter to work in my connection.
Questions:
How can I make my iMac 10,1 (27-in, late 2009, currently running OS X Yosemite 10.10.1) to have the above AirPlay mirroring or Arrangement to activate the connection?
Are there other ways I can make the connection to work?
Is there any body who has a similar iMac specs and OS X Yosemite who has overcome connecting to external Plasma TV Screen?

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop? Would like to use larger screen when working at home. I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work. When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer. What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible? Any assistance would be appreciated.

quax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

How to configure MS Loopback Adapter in Windows 7

Hello all,
I installed SAP NetWeaver 7.02 SP06 ABAP Trial Version mainly to teach myself some
WebDynpro Programming for ABAP. Unfortunately this does not work correctly.
I created a View in a Web Dynpro Component and the Layout Preview does not work.
I activated the services suggested in
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30129979-011c-2e10-fb9b-a60e0d704c1d&overridelayout=true
and did use the report RSICF_SERVICE_ACTIVATION with the variants
WEB DYNPRO ABAP
WEB DYNPRO ABAP DESIGN TIME
WEB DYNPRO ABAP TEST APPS.
In Addition I have set the FQDN as described in the document. I think the problem is the
MS Loopback Adapter. It is displayed with "No connection" in the Network and Sharing Center. I have no idea
how to change this. I have set the IP Adress to the on suggested in the Installation Instructions (10.10.0.10, Subnet-Mask 255.255.255.0) but the Loopback Adapter is displayed with no connection.
If I call a test webdynpro with the Hostname "localhost" it does work, so I think the webserver is running.
Any ideas ?
How do I set up the MS Loopback adapter under Windows 7 correctly ?
Thank you in advance,
Axel

Hi Axel,
Now that you know your local network works correctly for a computer not connected to internet or intranet, you have to do this:
1- For "No Connection" error (it is not necessary for the sap system to work), it's normal.
Create a local intranet with a 2nd computer if possible and make a configuration for home network after you will see "Connected"
2-Use of Pc hostname
You must configure the "profile parameters" by using transaction RZ10 and activate services (it's not easy, you have to take your time).
3- Webdynpro
To see the result of the webdynpro appli, you may know that not all web browser versions are compatible. The recent browsers don't work, use iexplorer8 or mozilla but not google ==> you will solve the problem of "timeout".
After that:
Activate the "internet communication framework" by using Transaction SICF. It takes you to "Maintain Services" and then fill Hierarchy Type ==>services, execute to reach at this step:
default_host/sap/bc/gui and icf ( If you've installed sap java, you will see both sap and sap_java)
do a mouse right click and select "Activate Service" and choose activate all.
You can now test the sample via web browser by using locahost.
Best regards.
Edited by: Tchounkeu Magloire on Nov 1, 2011 3:48 PM

Wi-fi: No Hardware Found and USB Wi-fi Adapter

Hello !
I want to explain everything that happened from the beginning. My MacBook Air started giving a problem showing " Wifi : No No Hardware Installed " . Then the problems started . I found a few ways to resolve this problem:
1 . Holding Command + Option + P + R before turning on the MacBook . He goes to the gray screen and restart again. Now release the keys .
2 . Shut down your MacBook and connect the charger . Click Left Shift + Control + Command + Power simultaneously. Generally the macbook league, but if you do not call , press the power button.
3 . When the system starts up activate bluetooth and then turn off . Restart . Should operate normally . Almost does not work sometimes restarting , shut solves .
Note : all these ways are temporary resolutions .
When the Wifi back to work, after some time the system panics and crashes and to shut down the macbook and start it again . When Wi - fi appears : No No Hardware Installed the macbook works perfectly without wi - fi .
I read many articles on forums and I think the problem may be with the AirPort card . I have not been to an apple store to see a budget.
Trying to solve the problem I bought a Wireless USB Adapter: LINK ONE - L1-AW1Un that comes with the installation CD containing the drivers. Use the Mavericks (the latest) installed. After restarting, open the program normally Raillink the Wireless Utility. I connect, create a profile and appears active when connected after a few seconds change to disconected doing it constantly.
Below is the Wireless USB Adapter manual: LINK ONE - L1-AW1Un.
https://drive.google.com/file/d/0B0tn0xatEydORjF5aV96ZFZxQ3M/edit
(MANUAL - Google Drivers)
I did not follow. Unable to create an IIS 7 certificate as shown in the manual. The drivers on the CD and the website are 10.5, 10.6, 10.7;
I need help.
Thank You

Hello Marvyn,
Try install following driver on Ralink's site: http://www.mediatek.com/en/downloads/usb-rt2870rt2770rt3x7xrt537xrt5572/.
After install driver on my MacBook Pro, OS X Mavericks (10.9.3), the Wireless USB Adapter L1-AW1Un works perfectly.
Best regards.

Adapter activate

Similar Messages

Maybe you are looking for