Adapter cable for K8N Diamond Plus PCIE cable?

Question

I guess the K8N Diamon Plus was made before standards were settled, since it has the oldish IDE/Molex power connector for PCIE cards. That while Power Supplies now use the standard connector. Of course there are molex connectors as well on the PS cables, but many power supplies are split into 2 or 4 channels and you're better off using as many channels as possible.
The problem is: I can't find any adapter cable with (female) PCIE --> (male) Molex... I can find cables with one male PCIE and two Molex (don't remember if they were male or female), but not the right kind. I would look more closely now, when buying, and I now know about PS with split/combined settings - but the two PS I have are both "not right" for the Diamond Plus.
Any help with such cables? I'm in Stockholm, Sweden, so something in Europe would be preferred.

Answer 1

Yes, it's a "FSP Epsilon 700 FX700-GLN"
Code: [Select]
Voltage Min.load Max.load Load Reg. Ripple & Noise
+5V 0.5A 30.0A +-5% 50mV P-P
+12V1 0.0A 18.0A +-5% 120mV P-P
+12V2 0.0A 18.0A +-5% 120mV P-P
+12V3 0.9A 18.0A +-5% 120mV P-P
+12V4 0.1A 18.0A +-5% 120mV P-P
+3.3V 0.8A 36.0A +-5% 50mV P-P
-12V 0.0A 0.8A +-10% 120mV P-P
+5Vsb 0.0A 3.0A +-5% 50mV P-P‧+5V & +3.3V total output is 155W max.
‧+5V & +3.3V & +12V1 & +12V2 & +12V3 & +12V4 total output not exceed 680W.
http://www.fsp-group.com.tw/english/1_product/2_detail.asp?mainid=1&fid=98&proid=462