Adapter configuration Failed when installing BODS 3.1

Dear All,
I am trying to install BODS 3.1 on windows 8 pro laptop and I have got an error,"Adapter configuration Failed" .
What will be the issue?
Regards,
Kathir

Similar Messages

Adapter Configuration failed, please re run the installer to fix the issue

the above message is popping up while i try to install BODS in Windows 8 64bit
after i give ok i couldnt able to run the BODS ??

the first problem about Adapter Configuration failed during installation is a bug. This problem happens in case the installer is not able to get the short path name for LINK_DIR and while submitting the command for configuring the Adapter the command is having spaces in the path resulting in incorrect command which is failing
check the di_0.log installer log file in <BOE_HOME>\BusinessObjects Enterprise 12.0\logging folder, open this file in notepad and search for following text
com.acta.adapter.sdkutil.UpdateAdapterVersion
you will see a error like java.lang.NoClassDefFoundError: Objects\BusinessObjects
if you are not using Adapters then this is not a problem for you, your installation is fine, you should be able to use other functions
The second issue with SNMP, the error message says "The port may be in use by another process", check if the port 4001 is avilable ? try with a different port number

Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install

I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
Setup cannot be completed… Final configuration failed to install.
Everything else upgraded fine.
There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
[16:00:43]:           Always: :!***** Installing: POSTINSTALL ***
[16:00:43]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:43]:           Warn:    :ApplyUpdates: Unable to load QFE file.
[16:00:43]:           Always: :Doing Preinstall task for POSTINSTALL
[16:00:43]:           Warn:    :CheckAndLoadUpdateFiles: Unable to load QFE file.
[16:00:43]:           Always: :Doing Install task for POSTINSTALL
[16:00:44]:           Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
[16:00:44]:           Info:      :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall Method: PostInstallProcessor
[16:00:44]:           Info:      :SetProgressScreen: Init Exe Install progress.
[16:00:44]:           Info:      :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
Manager\Setup
[16:00:44]:           Error:     :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception. We will return installSuccessful = false.:
Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[16:00:44]:           Error:     :StackTrace:   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
[16:00:44]:           Error:     :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
is denied.
[16:00:44]:           Error:     :InnerException.StackTrace:   at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
throwOnTopLevelDirectoryNotFound)
   at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
[16:00:44]:           Error:     :ProcessInstalls: Install Item Final Configuration failed to install. We did not launch the post process delegate.
[16:00:44]:           Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
[16:00:44]:           Info:      :SetProgressScreen: FinishMinorStep.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Starting*RollBack*******************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:44]:           Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Ended*RollBack**********************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :Entering Page: FinishPage
The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.” I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.” Based on everything else referenced in the log file previously, it seems like it was trying to locate
this file in D:\Program Files\System Center 2012\Operations Manager\Setup. Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
gives me:
SkuForLicense Version     TimeOfExpiration
       Retail 7.1.10226.0 12/31/9999 11:59:59 PM
The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.) Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)? I am not sure if there were supposed to be any further
configuration steps that did not get completed, so i dont know how stable SCOM is now. Should I re-run the R2 installer? Or is it OK as is? The only info online about a SCOM Install where the final configuration failed to install dealt with
an error upgrading the SCOM Console, which is not relevant to my situation. This is my test SCOM environment, running on a VM. I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.

Hi,
Please refer to the following links:
Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

Hi Willy,
Welcome to Apple Support Communities.
The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
Resolve iOS update and restore errors
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
I hope this helps,
-Jason

Illustrator CS6 says "installation failed" when installing.

Illustrator CS6 says "installation failed" when installing. No explanation is given. I don't have any previous versions of AI installed or any trials. Help? I really need to use this product today!

We can't know. You need to provide system information and possibly the install logs:
Troubleshoot with install logs
Mylenium

Install of Elements trial fails when installing Shared Technologies

Have tried installing the Elements 10 trial on both an XP Pro and a Win7 Pro PC and have the same problem.
Install of trial fails when installing Shared Technologies and then rolls back the install of the Elements Organiser.
Anyone seen this before? Any ideas?

Can you please make your question a seperate thread?
It would be helpful if you could please provide us the install log for it. Install logs can be found at C:\Program Files(x86)\Common Files\Adobe\Installers\ with name Elements STI Installer 1.0 <date>.log.gz
Use a decompression utility such as Winzip to uncompress the .gz file. Once uncompressed, you will have a new file without the .gz extension. The filename could now be something like "Elemens STI Installer 1.0 11-21-2012.log."
Open the .log file using notepad
Copy the whole log and paste it here.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

ADFS MFA Adapter fails when installed manually

Dear experts,
When following the article on http://technet.microsoft.com/en-us/library/dn807157.aspx, my ADFS service cannot load the WindowsAzureMultiFactorAuthentication provider, eventid 105.
I used the 'Install the AD FS Adapter standalone using the Web Service SDK', with the edited config file using a username and password. When browsing to the SDK folder on my MFA server using IE from the ADFS server, I can login and use all SDK services normally
but ADFS fails. Installing MFA locally on the ADFS server fixes the issue, but manual configuration should be possbile according to the technet article.
Also, there is an error in the technet document, it says to
Run the MultiFactorAuthenticationUserPortalSetup64.msi
But this should of course be the adapter MSI file.
Is there a fix?
Sincerely,
Jos

Thanks for the note on the typo. We'll fix the documentation on MSDN and the MFA Server help file.
For those having issues getting the adapter to work, we have had a couple of support cases escalated recently that both turned out to be typos in the config file. The registration script needs to have the correct path to the config file, and the config file
should look something like this:
<ConfigurationData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <UseWebServiceSdk>true</UseWebServiceSdk>
    <WebServiceSdkUrl>https://server.domain.com/MultiFactorAuthWebServiceSdk/PfWsSdk.asmx</WebServiceSdkUrl>
    <WebServiceSdkUsername>domain\username</WebServiceSdkUsername>
    <WebServiceSdkPassword>password</WebServiceSdkPassword>
    <WebServiceSdkCertificateThumbprint></WebServiceSdkCertificateThumbprint>
</ConfigurationData>
From the ADFS server, you can copy the WebServiceSdkUrl into a web browser. You should be prompted for a username/password. Enter or copy/paste what you have in the config file. it should display the web service operations without any certificate warnings.
If there are warnings, you may have to import the certificate into the Trusted Root Certificate store so that the ADFS server trusts it.

Perlbrew - locale.t fails when installing perls

I'm trying to use perlbrew in order to maintain private copies of Perl, rather than doing anything that might touch system Perl.
I've installed perlbrew successfully, but my attempts to use it to install perl 5.12 and 5.14 have both failed, apparently due to some problems encountered when applying locale.t.
I'm running OSX 10.8.0. Has anyone used perlbrew on this version, and/or encountered this problem?
Thanks,
Chap

Hi Chap
I'm running OS X 10.8.1.
I got the same problem when install perl 5.8.5 use perlbrew 0.5.0.
Then I try " perlbrew --force install perl-5.8.5 --notest ", it worked.
You can try it!

Error With Configuration Assitant When Installing New Oracle10g

hello,
when installing oracle10g enterprise edition for win32, I am recieving the following read errors. I have tried downloading the installation file several times, and even saving/installing oracle to different drives, but the same error always appears. I have successfully installed oracleXE on this machine (it is still installed). is there a work around for this? this did not appear to be a known error-
the errors ---
ERROR at line 1:
ORA-19624: operation failed, retry possible
ORA-19501: read error on file "C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB", blockno 384 (blocksize=8192)
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 1450) Insufficient system resources exist to complete the requested service.
ORA-19870: error reading backup piece C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB
ORA-19501: read error on file "C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB", blockno 128 (blocksize=8192)
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 1450) Insufficient system resources exist to complete the requested service.
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 5149
ORA-06512: at line 16

Hi,
have tried downloading the installation file several times
First uninstall enterprise software complete and install WITHOUT database option.
and after installation CREATE MANUALLY DATABASE.
http://dbataj.blogspot.com/2006/11/manually-database-creation.htmlregards
Taj

OC4J Instance Failed when installing the SSO against FMW OID 11g

Hi All,
We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
In Installer log it is showing Target Invocation Exception.
Please anyone advise.
Thanks in Advance.
Vaasu.

Hi All,
We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
In Installer log it is showing Target Invocation Exception.
Please anyone advise.
Thanks in Advance.
Vaasu.

Blank configuration files when installing from CD

I have archlinux already running on 2 computers, where have used the ftp installer, and I have not had any big problems installing with that.
But I have a computer only connected to the internet through wireless, which is why I would like to install from CD sources from the core installer cd, so I can configure wireless after installing.
I have tried this now on 2 different computers and on both I have problems when I come to the step for configuring the system.
The files are simply blank!
I found another having this problem in 2004 I think in this forum. He was told that this can only happen if you forget to choose DONE in some step or go back to an earlier step when going through the installer.
I have tried now 3 times and really taking care to do everything right.
I hope someone can tell me what I may be doing wrong or what the problem might be.

Kabi wrote:Now on the same computer I did a ftp install using jfs and no problems....
makes u wonder, I wonder if the CD would work with another file system, like ext3? If not could be that the CD is just bad in one way or another.
that's the only guess I have if it isn't the jfs file system.

Cygwin test failed when installing Cloud Control

When installing Cloud Control OEM12 on Windwos, I need to set up Cygwin first. After setting up Cygwin on the two hosts (chdevora03 and chdevora05), I issued the following to test 'ssh' connection between them but got 'permission denied'. What could be wrong?
$ ssh -l surrey\srvc_oracleadm chdevora03.surrey.ca 'date'
[email protected]'s password:
Permission denied, please try again.

$ ssh -v srvc_oracleadm@chdevora03 'date'
OpenSSH_6.1p1, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to chdevora03 [172.16.2.249] port 22.
debug1: Connection established.
debug1: identity file /home/sryadoraz/.ssh/id_rsa type -1
debug1: identity file /home/sryadoraz/.ssh/id_rsa-cert type -1
debug1: identity file /home/sryadoraz/.ssh/id_dsa type -1
debug1: identity file /home/sryadoraz/.ssh/id_dsa-cert type -1
debug1: identity file /home/sryadoraz/.ssh/id_ecdsa type -1
debug1: identity file /home/sryadoraz/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA 67:ae:3c:f6:b4:7b:f6:e1:8e:6b:30:66:ea:51:ed:93
debug1: Host 'chdevora03' is known and matches the ECDSA host key.
debug1: Found key in /home/sryadoraz/.ssh/known_hosts:1
debug1: ssh_ecdsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,password,keyboard-interacti
ve
debug1: Next authentication method: publickey
debug1: Trying private key: /home/sryadoraz/.ssh/id_rsa
debug1: Trying private key: /home/sryadoraz/.ssh/id_dsa
debug1: Trying private key: /home/sryadoraz/.ssh/id_ecdsa
debug1: Next authentication method: keyboard-interactive
debug1: Authentications that can continue: publickey,password,keyboard-interacti
ve
debug1: Next authentication method: password
srvc_oracleadm@chdevora03's password:
debug1: Authentications that can continue: publickey,password,keyboard-interacti
ve
Permission denied, please try again.
srvc_oracleadm@chdevora03's password:

PE 9 always fails when installing shared technologies.

I even paid for it (I know theres no diffrence) but I always get the same error (Adobe Premiere elements failed to install shared technologies. Rolling back changes). I have windows 7 x64 And after 3 HOURS of waiting of the phone for a rep, I decided not to contact them for any info. PE 7 installed fine, but they don't work on windows 7.

Use task manager to see if you have any other Adobe software running in the background - Adobe Bridge is often the culprit for these installation errors. If you find anything running then use End Process.
Cheers,
Neale
Insanity is hereditary, you get it from your children

LR 5 installation failed when installing from cloud

Error message:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi dsharpechevychase,
Please refer the kb: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html .
Regards,
Romit Sinha

Adding a new server to Enterprise pool failing when installing local configuration store

We have Enterprise edition running. It includes one Enterprise pool, on director pool and one edge pool. SQL is installed on a separate backend server in default instance. No other databases on the same server.
The problem comes up when trying to add another server to the enterprise or director pool. Same error message is shown when trying to install the Local Configuration Store:
PS C:\Users\administrator.DOMAIN\appdata\local\temp\2> Import-CsConfiguration -FileName .\CSConfigData-2012_03_22-09_29_14.zip -Verbose -LocalStore
Import-CsConfiguration : The 'MaxPublishBatchSize' attribute is invalid - The value '100' is invalid according to its datatype 'PositiveInteger' - The MaxIncl
usive constraint failed.
At line:1 char:23
+ Import-CsConfiguration <<<< -FileName .\CSConfigData-2012_03_22-09_29_14.zip
-Verbose -LocalStore
    + CategoryInfo          : NotSpecified: (:) [Import-CsConfiguration], XmlS
   chemaValidationException
    + FullyQualifiedErrorId : System.Xml.Schema.XmlSchemaValidationException,M
   icrosoft.Rtc.Management.Xds.ImportConfigurationCmdlet
Same error comes from the GUI. Any ideas?

Hi,
run these commands earlier:
PS C:\Users\administrator.domain> Get-CsManagementStoreReplicationStatus -CentralManagementStoreStatus
LastUpdatedOn : 28.3.2012 12:51:03
ActiveMasterFqdn : LYNCFE-01.domain.local
ActiveMasterLastHeartBeat : 28.3.2012 12:51:42
ActiveFileTransferAgentFqdn : LYNCFE-01.domain.local
ActiveFileTransferAgentLastHeartBeat : 28.3.2012 12:51:41
ActiveReplicas : {lyncdir-01.domain.local, lyncfe-
01.domain.local, lyncedge-01.domain.lo
cal, lyncdir-02.domain.local}
DeletedReplicas : {}
PS C:\Users\administrator.domain> Invoke-CsManagementStoreReplication
PS C:\Users\administrator.domain> Get-CsManagementStoreReplicationStatus -CentralManagementStoreStatus
LastUpdatedOn : 28.3.2012 12:52:21
ActiveMasterFqdn : LYNCFE-01.domain.local
ActiveMasterLastHeartBeat : 28.3.2012 12:52:42
ActiveFileTransferAgentFqdn : LYNCFE-01.domain.local
ActiveFileTransferAgentLastHeartBeat : 28.3.2012 12:52:42
ActiveReplicas : {lyncdir-01.domain.local, lyncfe-
01.domain.local, lyncedge-01.domain.lo
cal, lyncdir-02.domain.local}
DeletedReplicas : {}
After that I tried to add the server again, same error message. I also tried to re-join the server to domain and even re-created the whole virtual server

Adapter configuration Failed when installing BODS 3.1

Similar Messages

Maybe you are looking for