Adapter configurations in clustered environments

Could you please let me know if any additional configurations/changes in the WSDL files are required for the Oracle adapters in a clustered environment.
The Apps adapters , AQ adapters and the DB adapters in our processes have stopped working after being migrated to a clustered environments.
Any inputs on the same would be greatly appreciated.
Thanks a lot in advance!

DB Inbound WSDL generated for single node cannot be used in clusters. At least for DB adapter released with OSB 10.3.1 Maintenance Pack1, we have to create separate inbound wsdl in jdev if they are supposed to be deployed to cluster. These is no way we can modify the Inbound WSDL generated for Single node to work in cluster.
For a cluster inbound these steps are required
1. Distributed Polling – When generating the WSDL in JDeveloper, set the Distributed Polling option when creating the DB adapter WSDL in JDeveloper. This option is required in an Oracle Service Bus cluster.
2. UseDirectlySQL – When generating the WSDL in JDeveloper, if you are using Distributed Polling
3. <toplink:lock-mode>lock</toplink:lock-mode> on toplink file
Outbound WSDL should work with out any issues in cluster.
Are you using adapters bundled with OSB?
Cheers
Manoj

Similar Messages

Network adapter configuration error after quick migrate of stopped VM in 2012 r2 data-center edition 3 node cluster environment

We've got a couple of Windows 2012 r2 / Hyper-V 3 node clusters, and I have a problem with network adapters on them.
I have 3 node cluster all vm running fine on node 1 and 2 also quick and live migration very good between
node 1 and node 2, but no vm migrating on node 3. show "Network adapter configuration error".
If the VM is powered off, and I move it to 3rd
host (quick migration via Failover Cluster Manager), the network adapter loses its connection to the virtual switch - it turns to "Configuration Error"..if
manually change V switch of every VM then it worked only on 3rd node, and having same problem on node 1 and 2.
Quick migrate with the power off, and it fails to pick up the VSwitch on the3rd host.
Thanks
Shipon

Hi,
> I created a new VM via the Failover Cluster Manager (ie not via Hyper-V manager on one of the nodes).
Generally, this issue happens if a network adapter is added or removed on a highly available virtual machine using the Hyper-V manager console. Since the Hyper-V Manager console is not cluster aware, which means that configuration changes that are made to
virtual networks or virtual machines in the Hyper-V Manager console must be replicated to the other cluster nodes by using the “refresh virtual machine configuration” option in the Failover Cluster Manager console.
I know that “refresh virtual machine configuration” option is not needed if you change virtual machine settings using the Failover Cluster Manager console, but you may try to refresh the configuration of virtual machine to check the result.
In the Failover Cluster Manager console, expand Services and Applications, and then click the virtual machine for which you want to refresh the configuration.
In the Actions pane, scroll down, click More Actions and then click Refresh virtual machine configuration.
For more information please refer to following MS articles:
Refresh the Configuration of a Virtual Machine
http://technet.microsoft.com/en-us/library/dd759135.aspx
Highly Available Virtual Machines Lose Configuration Settings after Failover in Windows Server 2008 Failover Clusters
http://support.microsoft.com/kb/2000016
Hyper-V Live Migration fails on Windows Server 2008 R2 with Event ID 12080
http://support.microsoft.com/kb/2592237
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

How to configure multiple clusters on the same machine.

I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
"This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
Thanks,
Jacob

FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
Re: UDP flood hosed my LAN?

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

File adapter configuration parameter for "hexadecimal conversion"

(File adapter for XI 2.0)
Does anybody know the exact File adapter configuration parameters for reading a file with hexadecimal control characters as seperators. My file has
3 types of seperators - i.e "2F", "05" & "0D2F"
Eg: xml.fieldSeparator= "2F"
When I specify this the file is getting split into fields
at all the seperators in the file. I guess I am not using the right format in my defination ?
Dorai

Is there any special format for reading a file containing hexadecimal control characters?
The file to be processed has hexadecimal separators:
Field Delimiter : '09' or '05'
End of record delimiter: '0A' or '25'
End of Table delimiter : '07' or '2F'
Initially i would like to read the file into XI as it is i.e without any split by using "xml.fieldFixedLengths= "
However, everytime I process the file(with hexadecimal contol characters), I have noticed that my file is getting split, even when I did not specify anything for field separator(i.e when i used fixed field length).
Thanks,
Dorai

File name naming convention in File Adapter configuration in ID

Hi All ,
I have a query related to xml filename created in IDOC-XI-FILE scenario based on value of one of IDOC field .
The scenario is like this :
I have to send one xml file per store for material master . In this case how can I define my file name with store name in File adapter configuration in ID .
Naming convention should be
<storename>_date_masterdataname.xmlwhere store name is one of field of IDOC .
Plz help me .
Thanks in Advance
Regards
Prabhat Ranjan

Hi Prabhat,
take a look at this weblog:
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
you have to specify variable substitution
(in the file adapter)
and give the path to the store name (in the variable sustitution table)
you file name schema (from the file communication channel can look like this)
%storename%_date_masterdataname.xml
Regards,
michal
Message was edited by: Michal Krawczyk

Using adapter specific message attributes in SOAP adapter configuration

Hi,
Can you please let me know how to use adapter specific message attributes in receiver and sender SOAP adapter configuration. If possible , with example.

See here:
Adapter-Specific Message Attributes in the Message Header
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/frameset.htm
Sender Soap Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
Receiver Soap Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm

Sender Mail Adapter Configuration error

Hi,
I am working on scenario mail adapter to CRM system. And when I tried to configure the sender email adapter I have got the error following error, Can any one help me to resolve this issues
error occured: exception caught during processing mail message; java.net.ConnectException: Connection refused
the details I have provided are as follows
Transport protocol is POP3
URL - POP://mailservername/Inbox/folder
And I have tried with the IMAP4 also
URL - IMAP://mailservername/Inbox/folder
And we have cross checked that the XI server is able to ping that particular mail server.
Regards,
Venkat.

Hi Venkateswara,
I would suggest that you go through these to know how to configure your sender mail adapter,
<a href="/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step mail adapter step by step</a>
<a href="/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure adapter Scenario</a>
Also, to know the various parameters of a sender mail adapter, just go through this link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm">Configuring sender mail adapter</a>
Check your mail adapter configuration against these details. Also, check if the mail server you are trying to access is running.
Also go thru this pdf to make yourself more comfortable with mail adapters.
https://websmp205.sap-ag.de/~sapidb/011000358700004556712005E/HowTo_Mail_Adapter2.pdf
Regards,
abhy

Sender JMS adapter configuration for IBM MQSeries

Dear All,
i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
1. Transport Protocol: Websphere MQ - is it okay?
in JMS provider settings:
2. in channel name - what should be there?
3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
4. JMS Complaint - whether WebsphereMQ or JMS API.
in JMS Settings:
5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
6. JMS Message Selector - what data to take here.
So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
Regards,
Rajeev Gupta

Hi Swaroop,
you can send me those documents at my gmail-id : [email protected]
Hi All,
one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
Why Channel name is required in JMS configuration data?
Thanks,
Rajeev Gupta

Mail Adapter Configuration in XI 3.0

Hi all,
i tried to set up a process using the mail adapter. Unfortunately it doesn't work. Has anyone succeeded in setting up a process with the mail adapter using POP3 and SMTP?

Hi Michael,
I did not find any documentation of the XI 3.0 mail adapter so result of practical test only for outgoing mail using SMTP:
Mail server settings:
SMTP port 8025 (you can configure any port of course)
Account demo, password test
Mail adapter configuration:
Bubble adapter java class
classname=com.sap.aii.messaging.adapter.ModuleBubble
Bubble.Helper=com.sap.aii.messaging.adapter.ModuleBubbleHelperXIMailImpl
Part 0 : common part ######
Mail.MailSubject="mail from adapter z_outmail"
Mail.MailFrom=[email protected]
Mail.MailTo=demo@<you mail server name>
XIALL or XIPAYLOAD
Mail.MessageProtocol=XIPAYLOAD
Mail.Log=1110
Part : XI client to Mail server ######
OMail.TargetURL=smtp://<you mail server name>:8025
OMail.User=demo
OMail.Password=test
The port and path where the adapter waits for XMB messages from clients.
XI.Port=8240
XI.Path=/z_outmail
It look so that there is no POP3 support, just only IMAP.
Jiri

SOAP receiver adapter configuration issue

Hi Everyone,
When I am trying to excute a sync scenario from SAP<>XI<>Webservice from Integration engine , I am getting the below error message.
Error while sending message: com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Cannot process the message because the content type 'text/xml; charset=utf-8' was not the expected type 'application/soap+xml; charset=utf-8'.
In the receiver SOAP adapter, I have configured Transformation module where I kept the MessageTransformationBean in processing sequence as a priority and also provided the module configuration.
ModuleKey: transform
ParameterName: Transform.ContentType
Parameter Value: application/soap+xml;charset=utf-8.
But still get the above error message in the communication channel. I am using certificates in my configuration that were deployed in visual Admin.
In the adapter configuration, I have just provided the Target URL, Configured User Authentication, certificate authentication and SOAP action.
Can anyone help me.. how to rectify the issue.....
Thanks in advance,
Hareen

HI Hareen,
I decided to give SOAP1.2 using the standard SOAP Adapter a try
There are a few noticeable differences between the request message of SOAP1.1 and SOAP1.2
1.) SOAP 1.1 uses a different namespace from SOAP 1.2. For SOAP 1.1 it is "http://schemas.xmlsoap.org/soap/envelope/" while for SOAP 1.2 it is "http://www.w3.org/2003/05/soap-envelope".
2.) SOAP 1.2 does not use SOAPAction in its header.
3.) Content type is also different, for SOAP 1.1 it is "text/xml" while for SOAP 1.2 it is "application/soap+xml"
So a sample request for SOAP 1.1 would be like this:
Content-Type: text/xml;charset=UTF-8
SOAPAction: "http://sampleaction"
While for 1.2 it is:
Content-Type: application/soap+xml;charset=UTF-8;action="http://sampleaction"
The SOAP action is moved to the content type (experts please correct me on this).
Based on the differences, you need:
1.) Construct the correct SOAP Envelope for request message mapping and remove it for the response mapping
2.) Use MessageTransformBean to change content type
3.) Leave SOAPAction as blank
I think dynamic soap action is no longer possible because the action is hardcoded in the module configuration (please correct).
Hope this helps,
Mark

Error in Adapter Table Adapter Configuration IDM - Oracle 10g

Error in the configuration of Oracle Database Table Adapter Configuration.
Log:
2007-10-02 10:26:40,843 INFO [DBADAPTERLOGGER] DBProvisioner::createUser : DBProvisioner::createUser : userProperties is xel_usr_id#:#V04#;#xel_usr_password#:#56pddssd#;#xel_usr_status#:#1#;#xel_usr_first_name#:#Juana#;#xel_usr_last_name#:#Rengifo#;#xel_usr_group#:##;#xel_usr_title#:#Analista#;#xel_usr_dept#:##;#xel_usr_comm_lang#:##;#xel_usr_logon_lang#:##;#xel_usr_email#:[email protected]#;#xel_usr_tel_no#:#111-222-4444#;#xel_usr_time_zone#:##;#xel_usr_date_fmt#:##;#xel_usr_dec_ntn#:##;#xel_usr_role#:#System Admin
2007-10-02 10:26:40,859 INFO [DBADAPTERLOGGER] DBProvisioner::createUser : Starting time for createUser method :1191346000859
2007-10-02 10:26:40,875 ERROR [DBADAPTERLOGGER] DBSchemaErrorHandler::error : ERROR : 1:227cvc-elt.1: Cannot find the declaration of element 'xl-ddm-data'.
org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element 'xl-ddm-data'.

Based on your error a few questions come to mind...
What does your Configuration XML file look like? It's root XML node should be xdb_app_map. Your error makes me think you may be pointing at an adapter file versus db schema mapping file.
Are you starting from one of the provided examples like OraApp1.xml? If you followed Step 3: the connector file copy instructions during deployment, you should find the samples in "OIM_home/xellerate/XLIntegrations/DBAppTables/xml/DB_Schema" Or you can search for OraApp1.xml or OraApp2.xml.
Have you configured your IT Resource with the appropriate path to the XML file? If you are on Unix it's going to be case sensitive, I can't speak for a windows path.
I hope this helps. I know I had a few challenges myself when I first took a swing at the DB Table Adapter from the 9.0.4.1 connector pack.
regards,
Jason

JDBC Adapter configuration not initialized:null

i
we have a synchronous scenario with the following adapters , RFC <> XI <> JDBC.
1.JDBC Driver installation is done
2.RFC Destination type t is done in sap(sender) system.
3.checking the jdbc in VA is done
while running it is giving the following error.
com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
where we have to initialize JDBC Adapter configuration
Thanks in advance
Prasad Nemalikanti

hi prasad
There are 2 jar files that may be missing from your SQL JDBC driver --> msbase.jar and msutil.jar, I think once you add these to the driver it might work.
also check the driver string for the SQL driver 2 parameters
i.e 'com.microsoft.jdbc.sqlserver.SQLServerDriver' now becomes
'com.microsoft.sqlserver.jdbc.SQLServerDriver'
This will solve your problem
follow this link
Re: MS SQL Server jdbc Driver installation on XI .
XI JDBC Adapter using stored procedures
thanks
sandeep
Reward points if helpful

Error in adapter configuration

Hi folks,
I get an error saying:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '0227331228')', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '0227331228')', probably configuration error in file adapter (XML parser error)'.
But i dont find more fields defined in the datatype or in the content conversion during adapter configuration
Kindly help me on this

hi,
i think you have hierarchy structure in the adapter level.
Like
 <Details>
 <Employee Details>
 <Name>
 <Id>
 <Company Details>
 <Name>
 <Id >
If you have like this then just add Details.field Separator 'nl'.
*Reward Points If Useful*
Regards,
Prakasu

Adapter configurations in clustered environments

Similar Messages

Maybe you are looking for