Adapter Driver Update Utility?

Hello,
Is there an OS specific driver update utility for the C series stand alone servers? I see the driver packs that have all the individual drivers via a zip file, is there a way to automate this outside of an assisted install via the host configuration utility during the OS install?
Thanks in advance.

If your server is I running windows you, can run the SCU
See below and let me know if this helps, also don't forget to rate any useful answers
Cisco UCS Server Configuration Utility, Release 2.0(1) User Guide
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/ucsscu/user/guide/20/SCUUG20/overview.html
These are the new features introduced in UCS-SCU 2.0(1):
•Interactive Offline Diagnostics—Allows you to run the quick test and the comprehensive test to help identify sources of failure on your server.
•BIOS and CIMC update on C-460 servers.
•Improved method to install Windows 2008 operating system, using the WinPE boot.wim method.
•Support for assisted OS installation of new OSes-RHEL6 and SLES11-SP1.
•Application for updating drivers on C-series servers running the Windows operating system.
•A unified framework to perform the following:
–Server Inventory—View an inventory of your server's CPU, memory, power supplies, fans, IO, storage, BIOS and CIMC.
–Server Configuration—Set the BIOS boot order and configure a RAID volume on attached hard drives of your server.
–Firmware Update—Update your server with the most recent system software. You can get updates from a set URL, a network drive, or removable media. The firmware components that can be updated are - BIOS and CIMC.
–OS Installation—Install the RHEL, SLES, and Windows operating systems in a fully unattended mode. The most recent drivers for all on-board components are added from the Tools and Drivers CD or from other supported locations during the operating system installation.
–Diagnostic Tools—Allow you to run the Quick Test and Comprehensive Test to detect server failure.
–Server Health—View the health of the subsystems on your server like CPUs, memory, power supplies, fans, storage, PCI devices, BIOS and CIMC.
–Server Logs—View the System Log, System Event Log, and MCE Log of your server.

Similar Messages

Vga standard graphics adapter driver update

Hi does anyone know where I can find an updated VGA standard graphic adapter driver.? or what make it is?My young one is trying to play Roblox but keeps getting a message that the driver needs to be updated.Also if it is possible to install an other graphics card.

Hi,
You need to be running DirectX 9 at a minimum and it's not on your PC per PC image that you posted. You can try installing Directx but I suspect that you might need a video card. If you need a video card, then it's an older AGP style, 1.5v card that would be rated for Directx 9 and would work with the power supply size in your PC.
Good luck!
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Conexant audio update broke wireless adapter driver

Installed the recommended driver update for conexant audio (windows 7). Immediately upon restart the wireless network adapter card stopped functioning. No other updates or changes were made, and this was a direct result of this driver breaking the other driver. Could not get the wireless adapter driver to fix, had to do a system restore because even uninstalling the conexant driver did not fix the wireless driver.
Bad update!

Hi, Please try driver from the following link (the first one): http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6732463&swLangOid=8&swEnvOid=4063 Regards.

HP Envy I7 15" Notebook PC- Latest Intel Update for HD Graphics Adapter driver fails to install

My PC tried to install the driver update today, and both attempts failed after the installation. There are no diagnostic messages, only the X on the last step to indicate a failure. The HP support assistant continues to show the driver in need of updating. Any ideas how to fix the driver update issue? Thank you in advance.
PC Identification information: Windows 8.1, Product Number C8P48AV
What tries to update: SoftPaq SP630750, Version 10.18.10.3304
This question was solved.
View Solution.

Hi Vdolcourt,
Yes, I would recommend doing that. But make sure you uninstall the driver first.Here is the download from HP.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

BIOS update utility does not run

I am on an IBM-branded T42, model 2378-EXU. My current BIOS level is 3.13 (1RETDHWW). I have XP Professional with all service packs and updates installed and up to date.
I am trying to update to the latest BIOS of 3.23 (1RETDRWW).
I downloaded the BIOS update utility file 1ruj37us.exe from the Lenovo support & downloads site. I copied it to a temp directory on my hard drive. I disconnected my computer from the dock, have it on AC power, have a fully charged battery. I have shut down all other applications and my antivirus software. I have followed all other instructions on the site verbatim.
When I run the exe file, it starts up in Windows as expected. I run through all the confirmation screens and tell it to start the BIOS update. As I understand it, the next thing should be automatic startup of a DOS utility that does the actual work. Instead, as soon as I hit the final confirmation on the Windows utility, it shuts down Windows and restarts the computer. The BIOS does not get updated. I have confirmed this through system utilities (the Thinkpad system information) and by interrupting startup and verifying the BIOS information in the configuration utility. I have also tried reloading BIOS to default in order to reinitialize it.
I have done these steps at least four times now. My computer doesn't update and the update utility never fires up the workhorse part of the functionality. It just goes straight to system restart.
Can you offer any suggestions?

I have started the exe utility from a DOS window by manually typing in the name, I have started it from the RUN dialog box, and I have started it by double-clicking it from the Windows Explorer. In all cases it starts up the Windows application portion just fine. I get all the initial warning messages and confirmation messages. But as soon as I get to the "do it now button" (click Next to update your BIOS), it just immediately shuts down and restarts my computer without doing the flash update.

New NF980-G65 with an AMD X6 1090T and the BIOS Update Utility Crashes?

Last week I received my new NF980-G65 board and with it an AMD Phenom II X6 1090T (Thuban 3.2GHz Socket AM3). After installing the board and starting it up for the first time I noticed that it reports BIOS version 1.1 and CPU unknown. Next I downloaded the BIOS update to version 1.3 from msi, made a boot USB stick and powered up again. System will not boot from USB. I tried now over 20 different sticks from 256MB to 64GB and none of them worked!
Went back to my old system and ripped its floppy drive out to install it in the new computer. Had to go to RadioShack since I have not touched a floppy in over 10 years, but they had some on clearance. Made me a boot disk, put the new BIOS and install utility on it, booted the system with the floppy, started the BIOS update utility and watched it crash. When I start it by itself it gives me three screens of options and commands, but as soon as I try to use one of the commands or update the BIOS it keeps crashing.
What do I have to do to get the BIOS on the NF980-G65 updated so it will run with my AMD X6 1090T processor?
Thank you in advance for ANY help...
Tyler

Quote
I am sorry, but I need to work with this thing since I make a living writing code, I do not play with it! This thing and the support I am getting for it are not worth my time or money!
What thing are you talking about? You are experiencing the a certain symptom for which you do not know the cause. For some strange reason and without any in-depth tests you seem to assume that the board must be the problem (ignoring all other components (for example your factory overclocked memory modules).
Quote
the support I am getting for it are not worth my time or money!
What support have you tried to get that actually has to do anything with money? Please note that this is not MSI Technical Support but a User-to-User forum, run by users (just like you) that do not get paid for donating their private time to try to help others. Whatever your level of frustration is in regards to the money spent for your components, please do not use it to insult anyone here in this forum.
Quote
The result remains the same, the update utility keeps crashing...
Are still using the same floppy drive with the same floppy disk in it?
What is your current BIOS-Version?
Quote
BIOS update utility
What version? What is the exact file name of that utility?
Quote
ade me a boot disk
How/Based on what DOS Version?

Mac app store driver update killed my printing

Printer: Envy100 (D410)
OS: Mountain Lion (OSX 10.8.2)
Printer was working fine prior to this morning when I was notified that there was an update via the app store. I installed the driver update and now all HP software will not see the printer. I have done the following:
* Downloaded latest software from HP and re-installed - no change, cannot see printer
* Uninstalled HP Printer software, rebooted, re-installed latest version - no change, cannot see printer
* Added the printer first via System Preferences-->Print & Scan (no problem there) then tried to use the HP Utility to see the printer - no change, cannot see printer
* Tried to set up the printer manually using IP address - still does not see the printer
All of this was working fine yesterday. I am now without the ability to print, other than by email using hpeprint.com.
I don't know how to remove the latest update that hosed me. Please help.
Edit: I should also note that all the PCs in my house have no issues. Nothing changed on the printer itself, the only thing that changes is the driver software on my mac.
This question was solved.
View Solution.

Ok,
Reboot the router by unplugging it for 30 sexonds, then try following the HP Setup Assistant again.
If it still fails to locate the printer please let me know your router brand and model.
I now tested the Envy 100 using the latest HP Printer Drivers 2.12 and were able to print with no issues..
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I got internal error 2738 after trying to install the marvell yucon ethernet adapter driver

I got the marvell yucon ethernet adapter driver on the acer support page. My laptop is an extensa 5420-5038 with vista sp2 32 bit. My wired lan is not working but the wireless is. The version of the acer driver is 10.12.8.3 if that would help. I think uninstalling the old software for the adapter must have failed during installation and I don't know what to do. I don't know how to find any old applications or machine language software for the adapter in the computer to uninstall before trying again if that is what I have to do. Do I have to go to the command prompt and do something?

http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/internal-error-2738-when-trying-to-update-marvell/ce07aa54-f6d2-4834-89c5-71b61877eb4e

Trouble Downloading Driver Updates

X( HELP!
Whenever I try to download any of the driver/BIOS updates, it starts the download, gets about 200k downloaded, and then just stops with no error. I've tried to download BIOS, drivers, VGA drivers, even the updated Live Update Utility. I've also tried this several times over the last couple of months and always get the same result.
Any idea what could be causing this? Any help would be greatly appreciated.

Go to the boards product page and download them manually, live update isn't the best thing around.

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

After opening firefox, perhaps a minute later, a website called DRIVER UPDATE appears. How does this happen, and how do I stop this?

It has nothing to do with the home page which is set for Google. The long delay between opening with Google and the appearence of Windows Vista Drivers, which is a Slimware utility, is not understandable to me.

Hello,
Unfortunately it sounds like you have a virus on your computer. Try following one of these guides to remove it (I am not sure which one you are affected by, but the first one doesn't seem to affect Vista?):
* http://www.fixyourbrowser.com/removal-instructions/remove-windows-7-driver-update-pop-ads-virus-removal-guide/
* http://www.fixyourbrowser.com/removal-instructions/remove-update-windows-drivers-now-ads-easy-removal-guide/
Both have similar steps and use free antimalware software such as:
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
Good luck with the removal.

HT3492 I have an Acer S239HL display monitor connected to my MacBook pro that just stopped working. Acer customer support said I needed to refresh the display adapter driver. How or where do I find this?

How do I update or refresh the display adapter driver on my MacBook Pro? I have it connected to an Acer display monitor that just stopped working. Acer custoemr support told me I need to refresh the display driver. ANy suggestions on how I do this? Or what I need to download or update/ Thanks.

So the display WAS WORKING connected to your Mac?
Restart your Mac.
Try the monitor on another computer, Mac or Windows, to see if it works at all.

SCUP 2011 - Dell Driver Updates

Hi,
Im facing a issue with deploying Dell Driver update (for Wireless adapter). I have
SCUP 2011 server integrated with ConfigMgr 2007, releasing updates for Adobe products without any problem.
This week for a first time we decided to update drivers via SCUP as well but when we Publish an Update and Deploy it to a test environment via SCCM workstations reporting that Update is Not Required.
I know that this is very specific problem to Dell Driver update but I believe that Im not the only one who manages bigger amount of Dell workstations.
I would like to ask if somebody came across similar issue and have some advice for me?
Few details:
This is a update im trying to deploy:
http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=WF26J
Test boxes are with driver version 5.100.235.12
UpdatesDeployment.log shows only following line regarding this update:
Added update (Site_374FD2B1-3E03-4A84-AE2D-49D0FC93F63C/SUM_928ae428-46d2-4ccf-b4ee-cf5ea9cf53fa) to the targeted listAssignment {A8B92E94-EDA5-4885-9999-9850F47C9BFB} has total CI = 1
Assignment ({A8B92E94-EDA5-4885-9999-9850F47C9BFB}) received activation trigger
Detection job ({7B469A4D-1492-45B9-911E-D426BBE41A17}) started for assignment ({A8B92E94-EDA5-4885-9999-9850F47C9BFB})
DetectJob completion received for assignment ({A8B92E94-EDA5-4885-9999-9850F47C9BFB})
I didnt find any trace of Update ID (928ae428-46d2-4ccf-b4ee-cf5ea9cf53fa ) in any other logs which I find strange because Im missing part where update was identified as NOT REQUIRED.
Installable Rules for update from Dell Catalog are let say general, it checks if client PC is Dell and if it has correct OS version/architecture.
thanks in advance.
JK

Yes, I know this is an old post, I’m trying to clean them up. Did you figure this out, if so how?
Honestly this question is better suited for the Dell forums, they have a number of people there that can reproduce your issue and ultimately try to solve this for you.
http://www.enhansoft.com/

MSI 76.45 driver update for 6 series cards?

After checking the MSI site for updated drivers, it looks like the 7645's are the latest for the 6 series cards. Yet, in the readme file under compatible cards for this driver version, there are no 6 series cards listed. What's up with that?
I was just wondering if MSI has something wrong here. Is this, in fact, the latest driver for the 6600GT??
(My apologies if this subject was already covered)

Clark,
Just go to nVidia for your nVidia Drivers
Depending on who wrote the readme file, you're right, there could be something wrong, and it's just a readme. Nvidia usually claims all drivers are backwards compatable, however, as you may know, nVidia's drivers correspond with the genre of card currently on the market, ie GF4=4X.XX GF5 (FX)=5X.XX GF6=6X.XX and so on, so nVidia currently focuses on optimizations for the current card on the market and sometimes support suffers for older cards. Having said ALL that, more times than I care to count, MSI seems behind the times, this is the norm, as documentation and consistency is not a strong point on any the website, hence my recommendation to go directly to nVidia. If it is the latest and greatest from MSI that you want becasue of the DOT feature, then I believe that is the latest from MSI.
Now I'm wondering how you are looking for drivers. Are you looking for drivers via the MSI Live Update Utility, or on the Taiwan website? In any case whatever is there from MSI is there. It you want the latest and greatest then you can take your chances and start expirimenting with the latest from nVidia ftp://download.nvidia.com/windows The whole shebang is there for your convenience.
Finally, if everything is working fine, then there should be no reason to update. Recomendations to keep your system loaded with all the latest drivers is not always the best advice...
Does that help?

Portg Z10T-A140 - driver update: yes or no?

Hi ,
i have a Portg Z10T-A140
when i check toshiba service for update drivers , show do not need update .
but when i check windows update , show i must update " Intel corporate : graphic adapter WDDM1.1 , graphic adapter WDDM 1.2 "
now i must install windows update for intel or no ?
Thank you .

>when I check Toshiba service for update drivers, show do not need update.
The service station shows you only the driver updates available on Toshiba driver page.
In case you dont get any notifications about updates, this means that no new drivers area available.
The Microsoft updates are totally different and are related to your Window system.
If such updates are available you should install it.

Adapter Driver Update Utility?

Similar Messages

Maybe you are looking for