Adapter Engine alerts: Error in Adapter Engine

Hi All,
I have configured Alerts for <b>Adapter Engine</b>.
I am getting alerts with Alert Text as follows during Scenario runs - XML File to ABAP Proxy Scenario (Average size of files is in MB's) daily.
1.Error: DeliveryException: Problem inserting 6204b980-2f9d-11dc-9262-001635731444(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
2.Error: com.sap.engine.services.ts.exceptions.BaseSystemException: Exception ( SAP J2EE Engine JTA Transaction : [c1e757e003475] ) in rollback.
This error comes just <b>momentarily</b> and Messages (Files) are processed Successfully (No System Errors,etc at Adapter Engine).
I am not able to figure out the reason for this exception.
Expecting your valuable inputs.
Thanks.
Regards,
Sudharshan N A

Hi,
This happens sometimes when the adapter engine is on heavy load. Since the message is asynchronous, it is persistent. So it tries to write the message onto teh backend DB on which XI is involved. When teh load is more on the AE, the communication sometimes fails for a few milli seconds. This happens at times. Once it has enough capacity, it again preocesses the message successfully. It also happens sometimes that the message content will be lost. As of now, i am not sure if there is any solution for this.
reward if helpful.
Thanks,
sarath.

Similar Messages

Adapter Engine Alert Error

hi team
I have developed Adapter Engine Alerts and i have received an Error. when i checked ion the message monitor and also in the communication chhannel monitoring the following error is being displayed
" Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: No transition found from state: ERROR, on event: process_commence for DFA: Receiver communication chhannel:5601afa75060350a8aae48e821307ba3"
the Receiver communication chhannel is in red colour
please help me out
thanx in advance

Check
How to deploy 3rd party drivers in PI 7.1
SAP Note: 1138877
/people/michal.krawczyk2/blog/2010/03/17/pixi-deploy-a-jmsjdbc-driver-without-jspm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60237e74-ef19-2b10-5a9b-b35cc6a28e83?quicklink=index&overridelayout=true
Which version of PI r u using?
chirag.
Edited by: Chirag Gohil on Jul 27, 2010 1:28 PM

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

How to Get Channel Name in Adapter Engine Alerts

Hi All,
I am using 'Alrtcatdef' and 'Rules' in RWB to generate Adapater Engine Alerts. I am aware of the standard containers that are available to compose Alert Email content.
Is there a way I can read the Channel Name(and NOT Adapter type i.e Idoc, File) that errors out, in the email content.
Channel Name is the name of the channel I proivde in Integration Directory.
Thanks,
Xier

The above requirement could have been done with custom alert container variables ..... but defining custom alert container seems not possible.
Workaround:
When you run a scenario we have a fixed set of channel(s).....sender (optional) and receiver ..... an error in the sender channel goes back to the sending application and hence XI support personnel is excluded from it.....so now what remains is the receiver channel.
So if your requirement is to include channel name for one (or few) of the scenarios then include it in the Alert message that you set in the ALRTCATDEF ..... i.e. hard-code it ...... wont be a good approach if you have to implement the same logic for all the scenarios.....
Suggested the above approach thinking it is not possible to build custom container ..... if there is a way to do it then please even let me know.
Regards,
Abhishek.

Adapter Engine Alert

Hi,
I have set up the alert configuration and I am receiving all the alerts for intergeration server but when I raise any alert for adapter engine.. I am not receiving anything. Is there anything special needs to be done for the same.
Please Help ! ! ! !
Regards
Ria

Hi,
When you create the Alert Rules, create a separate Alert Rule for the Adapter Engine errorrs.
In where did the error occur in the alert rule, select Adapter Engine and make the adapter type as ALL.
To forward alerts to an Email Id, this is what you need to do,
1. Assign the Email Id to the recipient of the Alert in SU01.
2. Go the Alert Inbox of the recipient in RWB , Personalization --> Time Independent Delivery -->Email.
3.If SCOT has been configured, for every Alert sent to the Alert Inbox of the user, the Alert Email will now be triggered.
4.Text of the mail will be the Long Text defined in ALRTCATDEF.
The specified item was not found.

Adapter engine alerts are not working ..

We have been using SAP PI 7.1 version and SP08 and recently i have been configured XI alerts . When i have do IE errors alerts are recieving in Alert inbox as well as to mail but when i try to create error in Adapter engine iam not recieving any alert . I had been gone through most of the links but didnt get any and according to sap Note 913858 :
Q10: I do not receive any alerts, but when I test the alert
category using the report RSALERTTEST, an alert is delivered.
- A10: In transaction ST22, search for dumps caused by the user
XIRWBUSER stating that the authorization is missing for RFC
calls or for the function group SXMSALERT. If this is the case,
you probably have to regenerate the roles and profiles for the
XIRWBUSER.
But same procedure i have been followed but ST22 i couldnt able to see any dump and when try to run the program by giving alert category Adpater engine alerts are reaching inbox as well as to mail. I have tried each and every configuration but some thing is missing here couldnt able to find it.Anybody help me on this.
Thanks,
Aparna.

Hi Gabriel,
Thanks for reply. When i open the URL which was given by you i found below options .Could you please explain some more on this.
Initialize aii.properties
Execute function module RWB_PING on monitoring server
Send test alert via Alert.sendTestAlert(true) with MsgID
Send test alert via Alert.sendTestAlert(false) without MsgID
Get AdapterTypes from SLD
Get URL for Alert Monitor
Set URL for MDT
Get URL for MDT
Clear URL for MDT
Could you please explain how it is going to work
Thanks,
Aparna.
Edited by: aparna_karnam on Feb 27, 2012 5:23 PM

Error in Adapter engine-"No_Spedin"

Hi All,
I have observed the below error in adapter engine today(System error).
JCO.Exception while calling /SEEAG/RELI_XI_EDIINH_FILE in remote system (RfcClient[PEQ_RFC_INBOUND]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Exception condition "NO_SPEDIN" raised.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException
The message is going to print Sumfax to SAP ECC.There are no errors in the mapping and the communication channel is also running fine.there was an upgrade in SAp recently after which i observe this error and it didnot exist before.
Can anybody please help me!

Hi Sudha
check Abhishek's Reply may be helpful at this thread for com.sap.aii.af.rfc.afcommunication.RfcAFWException
Re: Error during processing local bean: localejbs/RfcAFBean
also check the The Sender Agreement Interface , it is either missing or not correct in ID
Regards
Abhishek

Graphic Mapping:IDOC to File-Avoid Error in Adapter Engine

Hi all,
I'm using Graphic Mapping in my IDOC to File scenario in which each segment in source IDOC will generate a ROW in target File with the condition: DATBI >= currentdate (and some other conditions)
I have a UDF and use the mapping function CREATEIF for this purpose:
DATBI -> UDF -> CREATEIF -> ROW
Problem scenario: In the source IDOC if all the segments have DATBI < currentdate then there is no ROW created, and I get the error in Adapter Engine
Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure ...
How can I avoid this?
I've tried to put this condition using XPATH in Interface Determination and got the error.
There is a way to use function current-date() in XPATH condition?
Thanks for your help,
Elaine

Hi all,
How can I "suppress the row node if condition fails"? I'm new in PI, so please give more details.
My FCC as follows:
Record Structure: Record, Row
Row.addHeaderLine 0
Row.fieldSeparator ,
Record.fieldSeparator 'nl'
Row.endSeparator ; 'nl'
It works fine if the condition satisfied.
In Message Mapping, I've use Test to double check my mapping, and in the scenario that conditions fails, there is no Row in the target message.
Please advise.
Thanks,
Elaine

Reg: Error in adapter Engine Monitoring

Hi Guys,
In my RFC to File Scenario i got error as Adapter message property was configured was mandatory element but there is no Dynamic ocnfiguration elementin XI MEssage Header. This is occur in adapter engine monitoring in RWB.
Thanks

This error comes if you there is a problem in passing the file via dynamic configuration
for this if you want temporary solution like filename not necessarily be dynamic then go to receiver file adapter then
adapter specific message attributes deselect filed Failif file name does not.... sme option where you can uncheck the failure option
and in this case need to provide the filename and file will get generated with this filename if there is no filename generates using dynamic configuration
for this to resolve permanently then check the filename is passed or not to file adapter in moni in dynamicconfiguratuoin tab of callAdapter pipeline service
HTH
Rajesh

RWB: System error in INtegration Engine, Adapter engine OK

HI All,
I have an interface converting IDOCS from R/3 into Text files and sending them to Legacy system via XI.
Data is flowing correctly, however I can see some errors in the RWB. (SXI_MONITOR is clean, no errors)
Upon investigation, I found that its has transmitted the file correctly, however this INtegration system error is shown.
To explain further:
BUssiness syst name of R/3 = BS_R/3
Bussiness syst name of legacy = BS_LEGACY
Bussiness service used = BS_SERV_R3
Message INterface = MIIA_R/3
So in RWB:
Message from BS_R3 to BS_LEGACY are SUCCSSFUL (Adapter and Integration engine , both success)
Message from BS_SERV_R3 to MIIA_R/3 (Adapter engine Sucess but INtegration engine = System Error)
Is it that the messages are going fine and the acknowledgements are failing or something like that.
Appreciate your guidance on same.
Many thanks
Shirin

Hi Shirin
I got a confusion understanding above
Scenario is IDOC R/3 -> PI -> Text Files -> PI -> Legacy system ?
if you have BS_SERV_R3 to MIIA_R/3 implemented for acknowledgments then definitely thats the error. But please share how you are getting ACK to understand and resolve error.
Thanks
Gaurav

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

RWB - Cache Connectivity Test - Adapter Engine shows error

Hello Friends,
In our one production system (PI 7.1), while do 'Cache Connectivity Test' from RWB -> Component Monitoring, it shows the following error for Adapter Engine under Integration Directory.
Error:
Cache notification from Integration Directory failed Error when accessing the System Landscape Directory.
No SLD elements of type SAP_XIAdapterFramework found
But, Integration Server - ABAP, Integration Server - JAVA shows green color. The messages are flowing through the Adapter Engine fine. i.e I am seeing 2 Adapter Engines under Integration Server in Component Monitoring. One Adapter Engine is in grey and another Adapter Engine shows green color.
When I click the grey color adapter engine, it immediately turns to red color and some different host name url is displayed (http://<wronghost>:53000/AdapterFramework/rtc).
So, what could be the problem ?
Kindly clarify, friends.
Thanking you.
Kind regards,
Jegathees P.

Hello Jegathees
Apply the solution in note #804124 HTTP communication with XI Adapter Engine fails. Set the parameters:
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
as described in the note.
Regards
Mark

Advanced Adapter Engine - alerting

Hello experts,
I'm using SAP PI 7.11 and I'm facing problems when I want to alert errors in my adapter linked to a integrated configuration object (AAE). Nothing seems to happen, but I clearly see the error in my communication channel monitoring.
Could it be that the adapter is an SFTP adapter from Aedaptive?
Thanks a lot
Dimitri

Hi Dimitri,
Looks like you resolved the problem.
We are also having similar kind of issue, we are on SAP PI 7.11.
alerts are not triggered for seeburger SFTP adapter even the error is showing in communication channel monitoring.
What is the reason for this behaviour of SFTP adapter.
Thanks
Srinivas Manda

File adapter can't connect to xi-engine

Hello,
I have a problem running the file copy scenario from tutorial. The file adapter reads the file and removes it from the source directory but the message never receives the mapping engine.
The adapter throws the error message (sorry it's a german installation):
'Fehler beim Übertragen der Message zum Endpunkt https://hpsaps01.inveos.com:8001/sap/xi/engine?type=entry über die Verbindung AFW. Grund: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: java.io.EOFException: Connection closed by remote host.'
Translated to english this would mean: Error by sending message to endpoint over connection AFW.
The status of the ist wait and changed after some time to system error.

Hi Volker,
I think it is a problem with Cache refresh. SO go to SXI_CACHE and try to refresh the mapping.
Also check this
File Adapter - Sender Problem
Also have a look at the following threads...
Transmitting message to entry pipeline failed !!
Problem while sending a FILE?
File Adapter
If the above doesnt work, Just try to restart AFW and AFxxx services (from Visual Admin)
Steps to restart AFW and AFxxx services are:
Start the Visual Admin tool. Connect to your XI J2EE Engine (640).
Go to Server->Services.
Try to restart such services as "SAP XI AF Messaging", "SAP XI AF Core", "SAP XI Adapter: XI", etc.
It hope it helps.
Regards,
Abhy

Adapter Engine alerts: Error in Adapter Engine

Similar Messages

Maybe you are looking for