Adapter engine cache is not display in sxi_cache PI7.1
Hi All expert ,
I am doing post installation step for Pi7.1 . during initial setup configuration . I have got error message . u201CProtocol of Step 'Executing BAPI SXMB_SET_ROLE_TO_ISu201D . I have try to resolve this error but I am not able to do so skip this step and completed resume setup .
after that I have check in SXI_CACHE, here I found that adapter engine cache is not display. please help me to resolve this issue.
Regards,
Amit
Hi
Answer is pure assumption
I checked the service.sap.com and found a OSS note related "BAPI SXMB_SET_ROLE_TO_IS"
Pls check the OSS note - Note 1319873 - PI CTC: Error in "Executing BAPI SXMB_SET_ROLE_TO_IS"
Pls take opinion from SAP / Basis before implementing the OSS note
Regards
Madhan D
Similar Messages
-
Adapter Engine Name is not displayed in Communication channel
Hi All,
In Integration Directory -- Service without party -- Business system -- communication channel -- when we create new communication channel then go ahead selecting File , JDBC, Mail adapter. ADAPTER ENGINE IS DISPLAYED BLANK.
Please let me know your valuable inputs.
Regards
ShivaI have performed all the above given instructions, but the issue is still pending.
Steps followed :
1. Performed all the steps in RZ70 as instructed.
2.Downloaded the TPZ file and assigned it in the required path
3.Adapter Engine is already assigned in the SLD.
Can you let me know, whether to assign hostname, IPaddress or fully qualified domain name in the exchange profile( where exactly in JAVA stack and ABAP stack)
Kindly request you to provide further inputs.
Thanks for your valuable inputs
Regards
Shiva -
Adapter Engine Cache not getting Updated
Hello Everyone,
My adapter engine Cache is not getting updated in my development server,
PFA... file for the error description after i refresh my Full ID cache from Administration tab
Regards,
SushantHi Sushant,
Please check the RFC destination "INTEGRATION_DIRECTORY_HMI" is working or not?
Check the parameters as suggested by others for this destination type.
Check the USER which is mentioned for this RFC destination is locked or not? if so please unlock it.
Try to change the pwd for this user and try again..
IF none of them are working please refer this notes 764176
Regards
Bhargava Krishna -
Integration Process is not displaying in SXI_CACHE
Hi all,
My Integration Process is not getting displayed in SXI_CACHE.
After configuration when I executed the scenario ..it went in to error "NO RECEIVER FOUND"
when i checked in SXI_CAHE the cache contents are not updated.
My Integration Process is not displaying in SXI_CACHE .....in not there in the list,this is the frist BPM in this machine.
Inside IR the Integration Process is activated with no error.(F7).
What is wrong with my configuration, have any one faced the same issue?
Thanks for your time and reply.
Regards
SunilHi Sunil,
Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
Path Prefix set to /dir/CacheRefresh.
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Also check out the role of the user using SU01. are you using PIISUSER?
Also refer:
How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
Also check
Does PIISUSER have the role SAP_XI_IS_SERV_USER_MAIN. Is profile generated for the role?
See SAP Note 1030255.
Some more advices:
1.Go to Environment -
> Click on Clear SLD data cache.
2.Tools -> Cache Notification
You will find at that there will be some red dots if u refresh
Please click on then and refresh once again
Regards,
Vinod. -
In my integration directory adapter engine parameter was not appear forJ2EE
In my integration directory adapter engine parameter was not appear forJ2EE engine.It appears for IDOC and HTTP Adapters.
Please clarify ASAP..
ThanksHi Chiru,
You mean to say that, In ur Communication channels based on J2EE Engine like File, RFC,etc u are not able to see Adapter Engine Type Parameter Value as Integration Server.
Reimport SAP BASIS Software Component once again in to repository and restart the Application Server and check.
Regards,
Sudharshan -
Adapter Engine : Cache Connectivity Test
Hi,
We have recently migrated our PI system's database from one host to the other and as a result there were some duplicate entries for exchange infrastructure components in SLD.
At this besides other problems we have noticed the Adapter Cache Connectivity test is failing.
We have deleted these entries and check that all the required entries are there and they are correct.
After this we did the Adapter Engine Cache connectivity test it still failed. But after some time we noticed that the connectivty test is successfully happening without doing any changes.
We see green bulbs with cache notification from integration server received successfully and cache data fetched successfully and update.
We are just wondering how it happened ? appreciate if anybody can help us understand.
Thanks & regards
Mrutyunjayhi,
check the below blog....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
check the point 4 (troubleshooting) in the above link
reward points if helpfull
regards
kummari -
Hello All,
In SXMB_MONI i got an error saying
SAP:AdditionalText>Error while writing to secure store: ERROR_UNKNOWN: Error when updating buffer for Adapter Engine</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
My Analysis :
1, In SXI_CACHE i could see 'Unable to refresh cache contents' and 'Error during last attempt to refresh cache' also I could not see any entry in Adapter Engine Connection Data Cache.
2, when execute the RFC connection 'INTEGRATION_DIRECTORY_HMI' Its asking for userId and password .
3, I tried reset the password and do a JAVA restart again with same error.
Clarificaiton need :
1 Looks some authorization error , but where exactly to maintain this ,
2, How the adatper engince connection data will populate in to sxi_cache transaction.
could you guide me clearly for this issue.
Regards.
Sethu.Thanks venkat,
now that Adaper engine url gotregistered , but no my cache content is not updating correctly , i.e when i execute the any cache refresh its loading for a long time and ending up an error and when i tried in Administator tool--> cache overivew > ID> and did cache refresh its end up with error.
Method fault! Message : IBaseException:Connection to system DIRECTORY using application DIRECTORY lost. Detailed information: Error accessing "http://c1bfxr41.unix.marksandspencercate.com:8136/dir/hmi_cache_refresh_service/int?container=any" with user "PIISUSER". Response code is 401, response message is "Unauthorized" com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system DIRECTORY using application DIRECTORY lost. Detailed information: Error accessing "http://c1bfxr41.unix.marksandspencercate.com:8136/dir/hmi_cache_refresh_service/int?container=any" with user "PIISUSER". Response code is 401, response message is "Unauthorized" at com.sap.aii.ibrun.server.valueMapping.cache.RefreshClient.refresh_VMCache(RefreshClient.java:60) at com.sap.aii.ibrun.server.valueMapping.cache.HmiMethod_Invalidate.refresh(HmiMethod_Invalidate.java:79) at com.sap.aii.ibrun.server.valueMapping.cache.HmiMethod_Invalidate.process(HmiMethod_Invalidate.java:40) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at
But in sm59 INTEGRATION_DIRECTORY_HMI - i used pisuper user id also in SLDAPICUST i used pisuper only, i dont know where the piisuser is getting conflict. any idea please? -
Integration Process is not displayed in SXI_CACHE
Hi Experts,
I am getting the below eror when I try to excute the SOAP -> JDBC BPM scenario
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
The integration Process is not displayed in the SXI_CACHE. Done with all type of cache refresh, restarted the server also.
What could be the problem?
Earlier I was getting the similar error for non-BPM scenario, just refreshed the cache in Admin, IR, ID and in SXI_CACHE and it solved the issue.
But here the Integration Process is not displayed after doing the above step.
Note: Always the SXI_CACHE is in ERROR status(Red color symbol)
Everytime before executing the scenario, I refresh the cache in SXI_CACHE. Once I done with the refresh, I get the belwo status
1. Cache contents are being refreshed (Yellow color)
2. Error during last attempt to refresh cache (Red Color)
Please share your suggestions to solve this issue.
Regards
SaraHi Sara
Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
Path Prefix set to /dir/CacheRefresh.
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Also check out the role of the user using SU01. are you using PIISUSER?
Also refer:
How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
Thanks -
Adapter engine alerts are not working ..
We have been using SAP PI 7.1 version and SP08 and recently i have been configured XI alerts . When i have do IE errors alerts are recieving in Alert inbox as well as to mail but when i try to create error in Adapter engine iam not recieving any alert . I had been gone through most of the links but didnt get any and according to sap Note 913858 :
Q10: I do not receive any alerts, but when I test the alert
category using the report RSALERTTEST, an alert is delivered.
- A10: In transaction ST22, search for dumps caused by the user
XIRWBUSER stating that the authorization is missing for RFC
calls or for the function group SXMSALERT. If this is the case,
you probably have to regenerate the roles and profiles for the
XIRWBUSER.
But same procedure i have been followed but ST22 i couldnt able to see any dump and when try to run the program by giving alert category Adpater engine alerts are reaching inbox as well as to mail. I have tried each and every configuration but some thing is missing here couldnt able to find it.Anybody help me on this.
Thanks,
Aparna.Hi Gabriel,
Thanks for reply. When i open the URL which was given by you i found below options .Could you please explain some more on this.
Initialize aii.properties
Execute function module RWB_PING on monitoring server
Send test alert via Alert.sendTestAlert(true) with MsgID
Send test alert via Alert.sendTestAlert(false) without MsgID
Get AdapterTypes from SLD
Get URL for Alert Monitor
Set URL for MDT
Get URL for MDT
Clear URL for MDT
Could you please explain how it is going to work
Thanks,
Aparna.
Edited by: aparna_karnam on Feb 27, 2012 5:23 PM -
PI 7.11 Central Adapter Engine is not started
Hi Experts,
After active objects list, in the central adapter engine: ache update not yet started.
Looking for this error, is possible that is the RFC INTEGRATION_DIRECTORY_HMI because responde 403 forbidden,
Did you have any tips?
Thank you!
BrunoAre you sure supplied credentials are valid for PIISUSER?
1) HTTP response does not contain a valid XML root tag or Error 'HTTP status code 400 Bad Request' while executing HTTP request (calling method 'get_status')
The error 'HTTP response does not contain a valid XML root tag' occurs when path prefix of the destination is '/dir/hmi_cache_refresh_service/ext'.
The error 'Error 'HTTP status code 400 Bad Request' while executing HTTP request (calling method 'get_status')' when path prefix is '/dir/CacheRefresh'.
Solution: Go to transaction sm59 and open destination of type 'H' INTEGRATION_DIRECTORY_HMI. Select "Connection Test". The connection test should return HTTP response 200.
Now go to "Logon & Security" tab and ensure that username and password are stored in the system. Fixing credentials should fix the problem.
Note: Credentials cannot be tested via "Connection Test" tool. If used credentials are wrong, the server simply returns login html page (using HTTP response code 200). As the login html page is not a valid cache refresh xml document, an error is shown in sxi_cache. -
Adapter engine URL different between CACHE and RWB adapter engine URL?
Hi there,
If I go to SXI_CACHE and go to the adapter engine runtime cache I get a URL of:
https://<server>/MessagingSystem/receive/AFW/XI
NOTE: The above URL is HTTPS.....and there is no port in the above....
However, if I go to the runtime workbench and click on the adapter engine and click on "test message", I get the following URL:
http://<server>:<port>/MessagingSystem/receive/AFW/XI
NOTE: The above url is HTTP and there is a port.
How can I get these URL's back in sync?
I want them both to be HTTP.
Any ideas?
ThanksHello
1) Check the value of the Exchange Profile parameter 'com.sap.aii.connect.secure_connections'. If you don't wish to use HTTPS this should not have any value set.
2) Delete the Adapter Engine cache in trx sxi_cache -> Goto -> Adapter Engine Cache -> Delete Cache Contents (trash can icon).
The AE cache will be populated the next time a message is sent through the system. Check the value after this is done.
Regards
Mark -
Hi,
I've found the follonwin log error Monitoring the Adapter engine cache:
<i>11-may-2006 17:13:25 - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.imhotep, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError</i>
Any ideas? We have tried almost everything...
Thanks and Regards.Hi Isabelle,
Check the link and reply of Manish Balla and also Antonio Dos, the same issue was reolved and answered.
<b>No Adpater Engine available in Communication Channel creation
Regards,
sridhar
Message was edited by: sridhar reddy kondam -
Adapter Engine Entry in SXI_CACHE
Hi All
How to get an entry in the adapter engine cache with user name in the sxi_cache ,Menu:GOTO--AdapterEngine Cache?
Thank u
Full Points will be Awarded.
Regards
udayHi prateek
I have executed an end to end scenario in the trace again it is throwing HTTP 401 error ,in TRACE it is giving
after retreiving the URL in the FM SAI_AE_DETAILS_GET
it is giving the blank user and thowing the error HTTP 401 unauthorized.
<Trace level="3" type="T">User =</Trace>
This i believe is due to unavailablility of user in SXI_CACHE :GOTO-->ADAPTER ENGINE CACHE
Help me in maintaining the adapter engine url with user in sxi_cache
Thanks
UDAY -
Adapter engine Error not caught in alert rule &alert category
Hi All,
I have cretaed my alert rule as follow.
Conditions
Connected To Message ; Not Relavant
Sender Service : *
Sender Interface : Test_OB
Sender NameSpace :urn:abc.com
Receiver party : *
Reciver Service:*
Receiver Interface : *
Receiver Namespace:*
Where did the error occur
No restriction.
When i tested this alert rule, mails are getting triggered for Integration engine alerts. But when messages fails in adapter engine, i am not getting any alerts/mails at all. Why this happens?
How should i debug this?Check this for troubleshooting: /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Also the alert should be raised in Adapter Engine for Test_OB as source interface.
Uncheck Suppress Multiple Alerts of This Rule checkbox.
Regards,
Abhishek. -
Adapter Engine Load balancing for Messages HTTP SOA/SOE
Greetings all,
We are currently implementing our SOE/SOA solution utilizing SAP services between a .Net Application. Basically .Net -> PI -> ECC and back.
We are load testing the system and are now experiencing the CI getting overloaded.
We have upped the Thread Count (Thread Manager 350 and System Threads 120) and the Queue thread from 5 to 20.
We are using SOAP with Principal Propagation.
There is a hardware load balancer we are using which can spread the load between multiple application servers. We modified the SLDRegistration host and ports (http/https) in Visual Administrator (SAP XI AF CPA Cache) in the global server node.
In SXI_CACHE Got -> Adapter Engine Cache, it displays http://<sidms>:<port>/MessagingSystem/receive/AFW/XI
Is this where the load balancer should be placed with the port name?
Any help would be appreciated.
ThanksHi Rocco
For switch over environment setup look at SAP Note 774116
Did you referred High availability guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cefe0399-0701-0010-8d86-b6b31cc5a681
Looking at your requirement. Check withe the Use cases of F5 application setup for E SOA. That can help
Thanks
Gaurav
Maybe you are looking for
-
Convert Smartform to PDF and send to SAP Workplace user
Hi to all. I need help of somebody expert in SMARTFORM's. I need to convert a smartform into PDF format and to send as attachement for SAP workplace of the user. I developed the next code. IT is to function and to send the mail for SAP workplace, but
-
Urgent:Error while deploying the BPEL process
Hi, I am doing a BPEL process to insert some data into employees table depending upon the employee Number. Means before inserting data, a check should be made whether that employee number already exists or not.If it exists then we have to update the
-
Oracle 8.1.6 and Redhat 7.2 kernel 2.4.9-34
During installation when the genclntsh scripted is called I'm getting the following linking error: Building client shared library libclntsh.so ... Call script /home/oracle/product/8.1.6/bin/genclntsh ... /home/oracle/product/8.1.6/bin/genclntsh /lib/
-
I have iPod Touch 4th Gen. I can purchase game token in 1 game but Not the other!! Get message in other game: "Purchase couldn't be completed...unable to connect to iTunes". I've tried ALL suggestions...PLZ help.
-
Infosource invisible in Productive system (APO BW)
Hello I've created a new setup where i'm uploading from a flat file to an infocube. It works fine in the T and Q system. However after transport to the P system i can only see the infocube in RSA1, i cannot see the infosource so i can't create an inf