Adapter Engine can work Standalone mode without IE?

Hi All,
   I found in one of the points which says
"Temporary Standalone operation of AE is possible even in absence of IE."
HOw is this possible?
Because the main objective of AE is to transform SOAP message to other format,
hence provide connectivity between IE and other application system!!!!!!
And hence if IE is not existing how dos communication happen???
Regards
Guru
PS:Points rewarded for answers

Guys,
as it has been written here: IE and AE are two separate components and they can run independently. That's right. But the exchange system is made by them both TOGETHER.
Well, if the IE is not accessible, AE can of course work, but the messages will not be delivered to the terget! AE has no idea wher should be this messages sent or what mapping should be done..
Example:
You have File->XI->File scenario:
AE picks up the file and tries to send the message to IE to be processed. IE is unaccessible, so AE tries it more times (depending on settings in VA) and if this is not successful, message remain in status failed.
So AE works and IE doesn't.
But when IE is accessible, AE processes the source file, send XI SOAP message to IE, here will be done mapping & routing, then it is sent again to AE to be processed in the target.
Hope, it's clear..
Peter

Similar Messages

  • Hello,  Windows toolbar disappears, I can work the software without tools.  I tried to install again in it that did not help.  I'd love to get help.  Thanks -isarel 053-5288322  anat

    hi
    I can work the software without tools. I have pc  adobe cs4
    in illustrator I dont have the tool bar, it's Suddenly disappeared
    I tried to install again in it that did not help.
    I'd love to get help.
    Thanks

    Anat,
    It may be time to look at this list, maybe going straight to 6).
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • XI Adapter engine not working

    Hi Masters,
    Please help to solve the below issue since the system is very high priority.
    Adapter Engine showing red index
    Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://vacifgx:50000/rep/conntest/int?" with user "PIRWBUSER". Response code is 503, response message is "Service Unavailable"
    I check the SLDCHECK t-code every thihg is working fine and the password for PIRWBUSER also corrrect.
    How to resolve the issue "Service Unavailable " and i getting this message in rwb, integration directory
    Thanks in advance
    Sunny

    Hi Sunny,
    U r  java services are down.So, check with u r Basis team.
    Whenever java services down always comes this type of error.
    Thanks
    Ravi

  • Adapter Engine not working

    Hi,
    I've found the follonwin log error Monitoring the Adapter engine cache:
    <i>11-may-2006 17:13:25 - Cache notification from Integration Directory received successfully
    Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.imhotep, string], target element type: SAP_BusinessSystem)
    [Data Evaluation]: GlobalError</i>
    Any ideas? We have tried almost everything...
    Thanks and Regards.

    Hi Isabelle,
    Check the link and reply of Manish Balla and also Antonio Dos, the same issue was reolved and answered.
    <b>No Adpater Engine available in Communication Channel creation
    Regards,
    sridhar
    Message was edited by: sridhar reddy kondam

  • Number of retries in Adapter Engine not working ok in SP18

    Hi
       We recently upgraded to SP18 from SP13 on our XI 3.0 Dev env. After upgrade , the number of error retries on the adapter engine is set to the default values as
    xiadapter.inbound.numberRetries.default = 3
    xiadapter.inbound.retryInterval.default = 300000 [ms]
    xiadapter.outbound.numberRetries.default = 3
    xiadapter.outbound.retryInterval.default = 300000 [ms]
    In RWB, we find that the number of retries in case of a database update error - goes up to two hours - instead of ending at 15 minutes -
    The number of retries - gets incremented to 2 in the sixth minute, but remains at 2 for nearly 2 hours - and then turns to 3 and ends .
    Anybody face this problem in XI 3.0 SP18 - any known OSS notes applied to fix this issue - Correct answers to be rewarded rightaway.

    Have you seen alreay these notes:
    <a href="https://service.sap.com/sap/support/notes/791379">Note 791379 - XI Adapter service properties documentation</a>
    <a href="https://service.sap.com/sap/support/notes/791655">Note 791655 - Documentation of the XI Messaging System Service Properties</a>
    Regards,
    Sandro

  • Error message in adapter engine, can u solve it

    Hi Gurus,
    I am facing problem when invoking webservice through XML Spy, its showing the following error:
    <b>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Database connection could not be established
         at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
         at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)</b>
    Can anyone please tell why it will come and when it will come..
    Give me suggestion how to solve this issue.
    step by step procedure will be appreciated..
    Thanks & Regards.,
    Pushparaju.B.

    Hi Ashutosh,
    is your scenario like SOAP to JDBC?
    in that case make sure that you have correctly loaded the jdbc driver followin this link:
    <a href="https://webservice.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">How To Install and Configure External Drivers for the JDBC & JMS Adapters</a>
    Hope this help
    Francesco

  • Advanced Adapter Engine in PI 7.1

    Hi there,
    Does anyone know if the Advanced Adapter Engine can be installed and run stand alone? i.e. without being connected to an integration engine?
    Obviously this would be a Non-Central Advanced Adapter Engine. But does it have to be connected to an ABAP stack?
    Thanks.

    Hi Krishneel,
    >>Does anyone know if the Advanced Adapter Engine can be installed and run stand alone? i.e. without being connected to an integration engine?
    I think this is possible, check the note
    Note 1314855 - Configuration Wizard: PI-AE initial setup
    and summary section of this ppt
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8?quicklink=index&overridelayout=true
    Regards
    Suraj

  • Communication channel Adapter Engine

    Hi
    I'm having problems identifying if a communication channel is working.
    I've created a JDBC communication channel but was unable to select the adapter engine from the drop down list as the list was blank.
    In the Runtime workbench  channel monitoring, the channel is not listed
    So 2 questions
    where is the config so that the adapter engine can be selected for the communication channel
    and what is the procedure to activate the communication channel so that it can be seen in channel monitoring
    all help gratefully received
    Geoff

    Hi,
    You can monitoring your communication channel via :
    http://<hostname>:5<sysnum>00/mdt/channelmonitorservlet
    In this monitoring, you can see if he is functional. You can start / stop manually this communication channel too.
    If you want see if the communication channel is actived, you can go to Integration Builder -> You open your communication channel and in Advanced Tab : you can see if he is actived or not.
    Best Regards

  • Unable to cancel messages in adapter engine

    Hello,
    We have implemented an interface with file connector. Since one week, all messages are hanged in the adapter engine with status TO BE DELIVERED.
    I tried to cancel but the folowing error message appears :
    Could not fail message. Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not fail message 0013211d-2dc8-1def-a8a4-938b4635c3af(INBOUND), as triggered by admin action. Reason: Predecessor not in final state.
    This interface is a proxy from ECC6-->csv file and i can't see the corresponding messaging in any queues SMQ1..
    They are only available in the RWB/message monitoring/adapter engine
    Can you tell me how to process these messages or cancel ?
    Regards

    Hi
        Messages will go in to the state Tobe delivered if there are no threads available for the particular adapter.. and lack of threads is due to the state of the messages in DLNG...
    Check the messages which are in DLNG and the reason behing long time for processing the same..(can be restart of the target system...)
    if you get the error saying predecessor is not in final state...
    for this you need to check the parent message in the queue which is causing this. this can be done using messaging system url
    http://host:port/MessagingSystem/
    go here and check the tab EOIO message ..... and there check the messages which are blocked and check the queue names if need to find the paticular queue..and reprocess if the error occured can be rectified...
    HTH
    Rajesh

  • Communication channel monitoring (adapter engine) in ccms (rz20) available?

    Hi,
    we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
    There sometimes errors disappear. At the moment these errors accumulate!
    Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
    So we don't look all the time in the communication channel monitoring!
    Have anybody an idea?
    Regards,
    matthias isenburg

    Have u seen the discussion
    Re: How do I configure an auto-email alert for Adapter engine errors
    Regards,
    Prateek

  • My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • At uni i need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can i do something about this without having to change settings everytime i change locations? running V3.6.8 on OSX

    At uni I need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can I do something about this without having to change settings every time I change locations? running V3.6.8 on OSX

    You can look at these extensions:
    *FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
    *QuickProxy: https://addons.mozilla.org/firefox/addon/1557
    *SwitchProxy: https://addons.mozilla.org/firefox/addon/125

  • Cache Refresh for Adapter Engine is not working

    Hi,
    our adaper engine is not working. At RTW no there are no channels visible and the button "Test Cache Connectivity" leads to a yellow icon for the adapter engine with the error text: "Attempt to fetch cache data from Integration Directory not yet started or still in process".
    The error reason is at <i>http://<j2ee host>:<port>/CPACache/history.jsp</i> available: <i>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't open Directory URL (http://pixd1.digoff.no:55200/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xd1.dat-dof-xi), due to: HTTP 403: Forbidden</i>
    <b>The cache refreh request from adapter engine to directory gets an 403 error.</b> What is strange: No problem, to execute that request in a browser, i get the right message, no fault.
    I searched for notes or other threads, i could find only <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373531383536%7d">SAP note 751856</a> , but it is valid for XI 3.0; we are on PI 7.0.
    I checked out:
    - no user blocked
    - all system users have standard authorisations
    - reimport of SAP BASIS SWC
    - SICF services for XI active
    - destination INTEGRATION_DIRECTORY_HMI working
    Any idea, how i can get the adapter engine working?
    Regards,
    Udo

    Hi,
    There are two ways to display the content of the CPA cache refresh.
    1. The Cache-Update Content-XML
    Document can be stored in the Adapter Framework database (J2EE schema) for further analysis. Here you have to set the property in the J2EE Visual Administrator tool.
    To do so, proceed as follows:
    =>J2EE-service SAP XI AF CPA Cache
    => set property trackCacheUpdateXML= true
    => You can now display the cache update XML with the alias  CPACache
    => View Cache Update History
    => View Cache Update XML
    2. The content of the cache refresh from the Integration Directory intothe CPA cache can be written to an XML file: Here you have to set the property inthe J2EE Visual Administrator tool:
    =>J2EE-service SAP XI AF CPA Cache
    => set property J2EE service SAP XI AF CPA Cache cacheUpdateDebugFile = true
    => the CPA cache refresh XML file will be in the server(0) directory search for the following file names:
    => value of the property cacheUpdateDebugFile.deltaif you intend to see the delta refresh accordingly and the value of the property cacheUpdateDebugFile.full if
    you intend to see the full cache refresh content
    Note: After your analysis, do not forget to reset the properties value to false.
    You can delete the XML cache-
    refresh table: alias CPACache
    => View Cache Update History
    => Delete History
    Also check out the user and its permission.
    regards
    Aashish Sinha
    PS : Reward points if Helpful

  • What is the max file size that a Adapter Engine [J2SE] can handle ?

    We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
    Some of the options, we are considering :
    - Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
    - What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
    Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

    Hi,
    j2se is not a good option here
    if you have 4gb then you need a copy solution
    a) build an proxy that will just copy the file from sender dest to receiver
    b) build an adapter that will do the same as proxy)
    this way processing of this message will be controlled with SAP PI/XI
    it will be as quick as copy & paste of the 4gb file
    I did the a) for one of the flow for 300 mb and it works perfectly
    Regards,
    Michal Krawczyk

  • I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

Maybe you are looking for