Adapter Engine Component Missing
Hi All,
In the Integration Directory, The Adapter Engine field dropbox is not showing the central Adapter Engine component.Because of this the adapters (other than HTTP and IDoc adapters)can't be used during configuration.
Can anyone help?
Thanks and Regards,
Soumya
Hi Soumya,
Go thru following document from service.sap.com , it may help you about Adapter Engine Components are configured or not .
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps
Regards,
Moorthy
Similar Messages
-
JAVA Adapter Engine is missing in XI 7.0
Hi All,
I am working on new xi server 7.0 .While the configure time adapter engine was missed.After that we installed service pack 08(for Both ABAP stack & JAVA STACK).After installing also Adapter Engine is not vissibile.
We installed these service pack 08 files for the java stack.
sap.com SAP-JEECOR 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180132
sap.com CORE-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601105000) SAP AG SAP AG 20060909180127
sap.com SAP_JTECHF 7.00 SP8 (1000.7.00.8.0.20060601105100) SAP AG SAP AG 20060909180133
sap.com BASETABLES 7.00 SP8 (1000.7.00.8.0.20060518071900) SAP AG SAP AG 20060909180134
sap.com JLOGVIEW 7.00 SP8 (1000.7.00.8.0.20060601105200) SAP AG SAP AG 20060909180130
sap.com SAP-JEE 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180140
sap.com LM-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601141123) SAP AG MAIN_APL70VAL_C 20060909180136
sap.com JSPM 7.00 SP8 (1000.7.00.8.0.20060618023100) SAP AG SAP AG 20060909180133
sap.com ADSSAP 7.00 SP8 (1000.7.00.8.0.20060524131300) SAP AG SAP AG 20060909180128
sap.com CAF-UM 7.00 SP8 (1000.7.00.8.0.20060519071848) SAP AG MAIN_APL70VAL_C 20060909180125
sap.com KM-KW_JIKS 7.00 SP8 (1000.7.00.8.0.20060601105400) SAP AG SAP AG 20060909180131
sap.com UMEADMIN 7.00 SP8 (1000.7.00.8.0.20060531093731) SAP AG MAIN_APL70VAL_C 20060909180133
sap.com BI_MMR 7.00 SP8 (1000.7.00.8.0.20060529231100) SAP AG SAP AG 20060909180135
sap.com SAP_JTECHS 7.00 SP8 (1000.7.00.8.0.20060608124200) SAP AG SAP AG 20060909180139
sap.com BI_UDI 7.00 SP8 (1000.7.00.8.0.20060529235200) SAP AG SAP AG 20060909180129
sap.com CAF 7.00 SP8 (1000.7.00.8.0.20060531093727) SAP AG MAIN_APL70VAL_C 20060909180121
sap.com SAP_XITOOL 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180134
sap.com SAP_XIAF 7.00 SP8 (1000.7.00.8.1.20060803090400) SAP AG SAP AG 20060909180125
sap.com SAP-XIAFC 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180128
Please help me..
Thanks,
GopiHi Gopi,
Last time this happened to us, we traced the problem to convoluted CIM data in SLD.
Look at oss note 764176, to see if you have the same symptons.
We deleted all XI related CIM data from SLD, restart our XI systems, and then followed OSS note 764176 to fix the CIM data.
Also please make note that there is a hot fix now for the following
sap.com SAP-XIAFC 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060919075421
sap.com SAP_XIAF 7.00 SP8 (1000.7.00.8.1.20060803090400) SAP AG SAP AG 20060919075417
sap.com SAP_JTECHF 7.00 SP8 (1000.7.00.8.1.20060706171200) SAP AG SAP AG 20060919075425
sap.com SAP_JTECHS 7.00 SP8 (1000.7.00.8.1.20060706171300) SAP AG SAP AG 20060919075430
sap.com SAP_XITOOL 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060919075426
Hope this helps/Farshad -
Versin iformation for adapter engine is missing in the SLD
Hi,
Just imported my Integration Directory changes into receiving PI System and have come to do the manual activation of the change lists that was asked for. When I do I get the activation cancelling with a message that a communication channel cannot be validated as the version info for the adapter engine is missing in the SLD.
Can anyone tell me what I have to do to get past this problem ?
Many thanks,
RossHello Ross,
It looks compatability problem with the Adapter engine and CC.
Check the system information and apply required patches if require. May be you can go to SAP raising a message.
http://<pihostname>:<port> systeminfo
Regards
Pothana -
Adapter Engine URL missing in RWB
Hi All,
In my newly configured PI 7.0 system, the Adapter Engine URL is missing at the fol. location:
RWB -> Component Monitoring -> Adapter Engine -> Test Message.
But when I open SXI_CACHE -> AE Cache, I am able to see the url http://pidev:50000/MessagingSystem/receive/AFW/XI
I think that this means that my ABAP stack is configured properly, but JAVA stack has some problem for Adaptr engine.
Please confirm if I am right and how to resolve this.
regards,
PiyushHi,
Are you using the FQHN?
Check also note #764176 if you have components missing on SLD.
Last, you may want to configure your system in order to check each of the steps.
Use this link -> Wizard-Based Basic Configuration:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
Regards,
Caio Cagnani -
Adapter Engine Field missing --
Hi All,
I'm trying to create new Communication Channel in our QA system.
I'm using 'Sender File Adapter' But somehow When I choose below option, the last value (Adapter Engine) is blank.
- Adapter type : Sender FILE http://sap.com/xi/XI/System SAP BASIS 7.00
- Transport Protocal : File System (NFS).
- Message Protocal : File
- Adapter Engine : ??????? (Blank)..
We are under PI 7.0 and I did same in Dev but it's not in QA. I think the value of 'Adapter Engine ' should be 'Integration Server'
automatically. Any Idea?
Thanks in advance.Hi,
Yes, if your adapter reside in the central adapter engine then it should be in the IS.
Adapters that host in different adapter engine, then decental adapter engine need to be selected.
Check you SLD configuration, whether there is an entry for your Adapter Engine or not.
Have a Look on this SAP Note : 764176, do hope it will resolve you problem.
Look for these discussion: Unable to determine name of central adapter engine
Missing Adapter Engine in the XI Domain (in the RTWB view)
Thanks
Farooq.
Edited by: Farooq Farooqui on Jul 31, 2008 7:19 AM
Edited by: Farooq Farooqui on Jul 31, 2008 7:29 AM -
"Adapter Engine is missing in Communication Channel".
Hi Experts,
I am Unable to Find out the Adapter Engine As Integration Server in the File Sender Communication Channel.
please let me know
Regards
Khannahi,
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
note : points pls if it helps you -
Missing Adapter Engine in the XI Domain (in the RTWB view)
Team,
I am running at in a bizarre situation at a client site. We have one SLD that is shared by 2 XI installations (a POC and a SandBox).
In the POC (in run time workbench view), I can see all the XI component (integration engine, BPM engine, Adapter engine, etc) under it's domain.
In the SandBox, the Adapter Engine is missing ...
We have applied the #764176 note. It has terminated successfully (no error), but we are still in the same situation - the Adapter Engine is missing ...
We have imported (the SWCV basis 7.0 and the ABAP 7.0).
Are we missing something?!?!
Thank !
A+Hi Naveen,
We have ran (and setup) the RZ70 trx successfully.
In the SLD the Business System for our sandbox is present (as the same for our POC business system). All authorizations are in.
The basis guy, at installation time, has given an existing SLD. He does not remember at the end of the installation if the adapter was missing or not (I was not there a the time of the installation, but I presume that it was OK).
Later in the week, they (customer) decided to switch the XI sandbox to another SLD. The adapter is missing in action since then.
Still does not work ;-(
Is there a way i can see (or attach) a couple of screen shot of my error ?
Thank in advance
A+ -
Adapter engine missing in the comm channal configuration
Hi Experts,
I am creating a File-IDOC scenario. While doing the configuration for the sender communication channel for file adpter the integration server is missing in the adapter engine drop down.
But when i checked for other adapter type like Idoc and Http adapter, the Integration channel is available in the adapter engine drop down(only for these two apater type only, for other adapters also i am not getting the integration server).
Can anyone help me regarding this, how to resolve this problem.
Any SAPnotes or blogs for that.
Help will be apprediated and rewarded as well.
Thanks
Manishahi manisha,
check the previous reply....the blog is nice
and also check the note 764176
check below
1. Open the "Content Maintenance" view under "Administration" in the SLD editing interface. (in 7.10: the view "CIM Instances".) Select "XI Integration Server" from the drop-down menu and navigate to the associations of the integration server. Select the "XI Integration Server Logical Identity" association and delete the association by pressing the 'Remove' button.
2. Switch to "Home" in the "Technical Landscape" view, and select the "Exchange Infrastructure" technical system type there. (as of 7.10: "Process Integration".) Select all domains and XI components for the host and delete these by selecting them and pressing 'Remove'.
3. Start the J2EE server. After you restart the server, the XI components log on to the SLD again and create a new entity of the "XI Integration Server" class.
4. To register the directory and repository again, you must also log on to the two tools.
5. Under 'Technical Landscape' in the SLD, select the "Exchange Infrastructure" technical system type. (as of 7.10: "Process Integration") and check whether all XI components (Adapter Engine, Integration Directory, Integration Repository, Integration Server and Runtime Workbench/RWB) are logged on correctly. The Adapter Engine component may be missing. In this case, start the registration of the Adapter Engine as described in Note 1031321, step 2.
6. Change again to the administration interface --> Content Maintenance (7.10: "CIM Instances") to the associations of the XI integration server.
Create a new association by pressing the 'New Association' button, select the "XI Sub-System viewed Application System" associations type here, and, in the next step, choose the BC system for the Integration Server. Save the association by selecting 'Associate'.
Create a new association by pressing the 'New Association' button, select the "XI Integration Server Logical Identity" association type here, and, in the next step, choose the business system for the Integration Server. Save the association by selecting 'Associate'.
7. Under 'Technical Landscape' in the SLD, select the "Exchange Infrastructure" technical system type. (7.10: "Process Integration") and check whether the association to the application system is displayed there (in column "Application System", the business system on which the integration server runs should be displayed).
8. To make the changed associations known in the directory, the SLD temporary storage must be deleted in the directory. To do this, log on to the Integration Directory and select the 'Environment --> Delete temporary storage areas for SLD data' menu option.
reward points if helpfull
regards
kummari
Edited by: kummari on Jul 10, 2008 8:42 AM -
Missing Audit Log of Adapter Engine in Message Monitoring
Hi!
I've a problem with a fresh installed PI:
The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
What can cause this behaviour?
Best regards,
DanielHi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel -
Error in RWB - Component Monitoring - Adapter Engine
Hi,
After we install an Additional Application Server Instance, we are facing an issue with the Runtime Workbench, specifically with the Adapter Engine status.
On the RWB we're have this error:
Ping Status: Unable to establish connection to
"http://<Additional AS Host>:<Central Instance JAVA Port>/AdapterFramework/rtc"
All the time it's pointing to the Additional AS with the Primary AS Java Port.
We are using a central SLD in PIP system.
We already reviewed, the point 8.12 of the "SAP NetWeaver PI 7.1 Including SAP EHP 1 - Troubleshooting Guide"
Any idea to solve this?
Regards,
GCC PIHi GCC,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
Luis Diego -
Hello guys!
During performing PI 7.1 Readiness Check I have to perform a test message under Runtime Workbench\Adapter Engine\Test Message.
After processing i receive following error:
Error while sending message: 403 Forbidden.
Does anybody know the cause?
Many thanks in advance!
JochenHi Sreeni!
Direct hit!
This was the problem! Missing role!
Many thanks to you!
Additional Information for all:
Readiness Check (PDF)
A compilaton of simple and advanced checks for Process Integration 7.1 (PI 7.1)
Page 44
SAP Note 817920 - XI Readiness Check 3.0/7.0, 7.1
Regards,
Jochen -
Message Monitor Missing Messages in Adapter Engine
All,
I had over 200 messages in my adapter engine but recently I only see 115 for the same period.
Additionally, all of the 850 (PO) inbound messages are gone. I see them in the Integration Engine but not in the Adapter Engine anymore.
I need to repeat processing for a particular 850 message and so I am wondering:
(1) Any suggestions on why these messages are missing ?
(2) Is this a retention period issue ? If so, how do I control the period ?
(3) How can I retrieve these messages ?
(4) Is there another place where I can re-process the 850 messages I need. Where and how ?
Thanks everyone in advance for your help.
Regards,
AndyHi,
>>>(1) Any suggestions on why these messages are missing ?(2) Is this a retention period issue ? If so, how do I control the period ?
It may be caused coz of some adapter failure which you are using for that particular scenario. Also for rention period you can check it in the particular communication channel, but i don't think it will be the issue. try finding it in moni, if it is not there go to RWB and then find it for you particular interface. If it is not there try to find the status.
>>>(3) How can I retrieve these messages ?(4) Is there another place where I can re-process the 850 messages I need. Where and how ?
In RWB -> message monitoring you will find all the message, Try searching it for your interface and the you can select all messages and you can reprocess it.
For error message , in RWB go to particular adapter, and check if it is running or not. It must be in running status. so check and let us know about it.
Regards
Aashish Sinha -
Component monitoring - adapter engine error, but no channel in error actual
Hi,
We have a problem in displaying a status of Adapter Engine in RWB. In component monitoring there's a red light and the status - "Are communication channels without errors?" says there's an communication channel in error. But when I click the Communication channel monitoring, everything's green there. Yes, there was an error before, but it's ok now. Why is the AE item in Component monitoring still red? How to make it to reflect the current status?
Thank you,
OlianHi Olian,
i am saying to use the cache connectivity test button option from RWB -> compnent monitoring , so have you done cache test using this? if yes, click on refresh display to see the latest adapter engine status..............if it is green, then it is okay..............but if it is red here, it means some comm channel is erroring sometimes - i guess it can be a file adapter using ftp or some rfc adapter......................
if it is green here and compnent monitoring - adapter engine status is red because some comm channel errored in past.........then i think some cache is not getting refreshed - i do not know exactly how to rectify it...........but i can tell you some workaround for it..............the comm channel which was erroring just stop it from comm channel monitoring........then close RWB and again open it and see compnent monitoring - adapter engine status again in it - i think it should be green now.......or try by changing any comm channel description data in ID and save and activate it.........then again check your compnent monitoring - adapter engine status..................but dont worry i think this is a temporary problem
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Mar 26, 2008 11:50 AM -
Adapter Engine link disapperead from RWB - component monitoring screen
Hi.
I restarted PI.
After that, the "adpter engine" line (link) disapperead from the page RWB - component monitoring.
PI is running, it is exchanging data with Ecc and Thirdy Party systems.
How to solve the problem ?
To arrive to "defective" screen:
http://host:5xx00/rwb/index.jsp --> component monitoring --> component with status all --> display
Under domain xx, under integration server, there is no adapter engine line/link
Thanks !HI,
Check in SLD-> content maintenence-> XI adapter framework is registered or not...
If not thn register by performing the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
have a look on this...
PI 7.1: Problem with SLD configuration: Cannot find central Adapter Engine
Regds,
Pinangshuk. -
Basic URLs of adapter engine associations properties are missing
Dear all
We are running on the nw 7.11 pi version.
And we recently enabled the ssl on the system.. we have HA in place with web dispatcher.
We updated the exchane profile parameter with all ssl n required parameters.
CPA cache refresh is working fine.. but. While doing the Intergration server ABAP cache its failing.
And we checked the sap note 1678104 under the XRIA assoctiation and as well as under the Basic urls of adapter engine "Secure URL" properties are missing . Since we r not able to update this property.. the adapter engine is still ponting to http url instead https.
Please see the screen shot.
Regards
Manoj KHi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel
Maybe you are looking for
-
Macbook Pro still running slow after reformat
So my Macbook pro, which is about 3-4 years old now, just started running slow after the latest update i did, whichever the latest one was. Possibly a security update or whatever it was. So i decided it was time to reformat and just clear out the stu
-
AD object security inheritance getting disabled
Hi, I am observing few uses are having security inheritance issue and AD administrators are losing their permissions on these user objects. Inheritance is getting removed automatically after some time even after setting it manually as per below scree
-
Revision: 17504 Revision: 17504 Author: [email protected] Date: 2010-08-27 14:52:53 -0700 (Fri, 27 Aug 2010) Log Message: Some improvements to the stream reconnect logic. Modified Paths: osmf/trunk/framework/OSMF/org/osmf/net/NetConnectionF
-
Extract part of xml into CLOB or XMLType
I need to extract part of XML into CLOB or some another type. But I don't need only extract data, by whole part od xml with elements. How could I do it in PL/SQL? For example from this xml: <bookstore> <book category="COOKING"> <title lang="en">Every
-
Cs3 and cs4 web standard compatible with vista home basic?
Are Adobe CS3 and CS4 Web Standard compatible with Vista Home Basic 32bit? I only see Windows Vista Home Premium / Vista Business / Vista Enterprise / Vista Ultimate / XP listed as compatible. Many thanks.