Adapter Engine field is empty
Hi all,
1. When creating Communication Channel in ID , "Integration Engine" field coming as empty when file adapter is selected. It is shwoing error msg when saving the CC. Why it is coming as empty? and how to resolve it?
2. When selecting the IDOC adapter in Communication Channel only "Receiver" option is enabled and "Sender" option is disabled. What to do for "Sender" option also to be enabled?
regards,
Khaja.
Hi,
Check if post installation is done properly.
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Also check in SXMB_ADM and check for Integration Server configuration is fine.
Thanks,
Prakash
Similar Messages
-
Communcation channel - Adapter engine field is empty.
Hello Gurus,
After pointing XI to a seperate SLD, the Adapter engine field (the pull down) in the "Communication channel" is empy. The adatpers are visible and no problem there. The business systems apprears to be O.k in the new SLD. We perfomed a export of technical and Business systems from old SLD and new SLD.
Help will be awarded with points.
-N.SHi,
Refer this blog:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Regards
Suraj -
Adapter Engine field is blank while creating RFC recieving Comm Channel
Dear XI gurus
I have just installed XI server and also did the configuration and everything seems to work fine. I did SLD configuration, mapping etc.,
Then went to Configuration module and am trying to create a sender communication channel (Adapter Type RFC).
The Transport Protocol and Message Protocol fields got automatically filled by 'RFC' and 'RFC (RFC XML)' respectively.
However Adapter Engine field is showing up blank and when I try to select from the drop down menu, it is also blank.
I did search for other postings and tried the following as per the suggestions
Went visual administrator (by clicking on go.bat) and made sure that the cluster->Service and all the services needed for SAP XI Adapters are up and running
I would appreciate if you have any other feedback on this problem.
Thanks
RamThanks a lot for your response, I will try that again and will let you know.
Meanwhile I also followed tech note 1031321 which said the following.
2. To register the Adapter Engine, you have to restart the following applications:
sap.com/com.sap.aii.af.app
sap.com/com.sap.aii.af.cpa.app,
But this didn't help. I will try your suggestion -
RFC Adapter: Adapter Engine Field Blank
Hi all,
Could anyone guide me through troubleshooting this one: When creating a RFC communication channel the listbox for the Adapter Engine is empty so I cannot select Integration Server as in other channels. All I know is that this might come from a messed-up SLD.
What do I need to look for? Any help is really appreciated.
Eugen.Hilbert,
Thanks a lot for your answer. It kept me looking for more OSS notes and #764176 actually solved this problem.
Eugen. -
Adapter engine field blank in File Comm channel (Sender)
Hi,
I am not getting any value in drop-down list of adapter engine in file adapter communication channel.System is allowing me to save the comm channel but when I am trying to create sender agreement, system is giving me following error
<b>Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.s01., string], target element type: SAP_XIIntegrationServer)</b>
I m getting values of adapter engine when I select some other adpter like IDOC or RFC.
Please help...Hi,
1) Can you check your Post Installation.
2) Look for SAP NOTES.
3) Try cache refresh
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
If you still face issue try this .
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss -
Adapter engine field blank in RFC Comm channel (Sender)
Hi Friends,
I am not getting any value in drop-down list of adapter engine in RFC adapter sender communication channel.System is allowing me to save the comm channel , system is giving me following error
No adapter engine specified
I m getting values of adapter engine when I select some other adpter like XI.
Thanx
AnandHi,
The RfcAdapter is implemented as a J2EE Service and thus this service has to be started and stopped. This will affect the whole RfcAdapter and can be done from the J2EE Engines Visual Administrator. When you are connected to the J2EE Engine choose the tab 'Cluster' and open the appropriate server node in the tree. Then open the 'Services' node. There you can see the entry 'SAP XI Adapter: RFC'. When you open the context menu on this entry you can start and stop the service
Regards
Chilla... -
RFC Adapter Problem: Adapter Engine Field Blank
Hi,
I want to invoke a BAPI defined on a R/3 system. I am trying to create a RFC Adapter in the Integration Directory by creating a communication channel.
The problem I am facing is that when I define the Adapter Type as RFC, the Adapter Engine dropdown list is blank and it does not contain any entries.
On passing a document through XI, I can see the following error in the monitor:
<SAP:Code area="INTERNAL">ADAPTER_NAME_INVALID</SAP:Code>
<SAP:P1>RFC</SAP:P1>
<SAP:P2>PLSRV_CALL_ADAPTER</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unknown receiver adapter (name = RFC)</SAP:Stack>
what do i need to configure on the XI and R/3 side ?
thanks,
Manishi followed the steps but i am not getting the populated adapter engine list.
Actually, the Association shows a list of logical systems to be added (Application System, BC Application Server, BC Central Server Instance .....). I experimented with many systems but it is not working.
My basic problem is I need to call a BAPI from XI. The XI monitor shows the error :
Adapter Name Invalid.
Unknown Receiver Adapter (name=RFC).
Now, for the RFC adapter, I have not given it any name. My Communication Channel is called GeneratedChannelRFC. I am not sure where this error is coming from. I would appreciate any help to solve this error.
thanks,
Manish -
Adapter Engine Field missing --
Hi All,
I'm trying to create new Communication Channel in our QA system.
I'm using 'Sender File Adapter' But somehow When I choose below option, the last value (Adapter Engine) is blank.
- Adapter type : Sender FILE http://sap.com/xi/XI/System SAP BASIS 7.00
- Transport Protocal : File System (NFS).
- Message Protocal : File
- Adapter Engine : ??????? (Blank)..
We are under PI 7.0 and I did same in Dev but it's not in QA. I think the value of 'Adapter Engine ' should be 'Integration Server'
automatically. Any Idea?
Thanks in advance.Hi,
Yes, if your adapter reside in the central adapter engine then it should be in the IS.
Adapters that host in different adapter engine, then decental adapter engine need to be selected.
Check you SLD configuration, whether there is an entry for your Adapter Engine or not.
Have a Look on this SAP Note : 764176, do hope it will resolve you problem.
Look for these discussion: Unable to determine name of central adapter engine
Missing Adapter Engine in the XI Domain (in the RTWB view)
Thanks
Farooq.
Edited by: Farooq Farooqui on Jul 31, 2008 7:19 AM
Edited by: Farooq Farooqui on Jul 31, 2008 7:29 AM -
File adapter, no item in Adapter Engine list
I'm trying add communication channel (File/FTP Receiver)
There is no item In Adapter Engine list . This fieldis mandatory.
What must I do to see "Integration Server" in this list?
Thanks.Hi Cemil,
See these..
Adapter Engine field is empty
Integration Server does not appear in Adapter Engine field for File adapter
cheers,
Prashanth
P.S Please mark helpful answers -
No Adapter Engine value in File Adapter Config
Hello,
When we configured File adapter in Integration Directory we noticed that ADAPTER ENGINE pull down is empty.
I cannot assign any value to Adapter Engine field.
It is a new test system and should all be configured already. I wonder if this is ok or not. My experience was that I should be able to see Adapter Engine there??
Moreover Adapter Engine field has a red star which means is mandatory field but I am not sure...?!
I will appreciate any directions from experienced or xi basis people.
ThanksFollow the steps given in this BLOG for adapter enginer coming in ID -
Adapter Engine cannot be found in Integration Directory
Gud Luck !! -
Adapter Engine missing in SLD and RWB
Hi all,
I have no Adapter Engine in RWB or under technical systems in the SLD.
In Integration Directory I have "central adapter engine" in the adapter engine field in my File adapter .
But I get this message when I open the communication Channel:
"No SLD elements of type SAP_XIAdapterFramework found"
Please advice,
Thanks!Hi Thomas,
Your Adapter Framework is probably not registered in the SLD. You may force the
registration if you perform the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
Refer sapnote in chapter 8.2 for more in the link provided below on Trouble shooting.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Cheers,
Ram. -
Adapter Engine Component Missing
Hi All,
In the Integration Directory, The Adapter Engine field dropbox is not showing the central Adapter Engine component.Because of this the adapters (other than HTTP and IDoc adapters)can't be used during configuration.
Can anyone help?
Thanks and Regards,
SoumyaHi Soumya,
Go thru following document from service.sap.com , it may help you about Adapter Engine Components are configured or not .
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps
Regards,
Moorthy -
No values in the dropdown for Adapter Engine
Hello Colleague,
While configuring a sender adapter engine in the integration directory, there are no value displayed when we select an Adapter and do a dropdown on the "Adapter Engine" Field.
Could you pls. help.
Regards,
Gajendra.Hi Gajendra,
Have you imported the SAP_BASIS content into yor repository?? If not do that.
Also you can go through the below thread
<i>No Adpater Engine available in Communication Channel creation
Regards
Sunita -
Adapter engine empty in Integration Directory
Hi
when I try to create a Business System in Integration Directory and I am configuring the communication channel
(for example File Adapter or RFC )
the field "Adapter Engine" is empty and has no selection to choose from.
Is there a problem in configuration or else? I have no idea.
Any help is appreciated and points will be rewardedHI,
I think the problem is your Adapter metadata is not imported.
Import the SAP BASIS Software Component into the Integration Repository.
For more-
Copy XI3_0_SAP_BASIS_<version> (6.40,7).tpz from <Components DVD>/XI /XI_CONTENT to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
After that go to Integration Repository->Tools->import Design Objects and then import it.
Regards,
Moorthy -
Blank field for Adapter engine
Hi Experts,
I am facing a problem while configuring my communication channel.
When I am trying to selct a server in ADAPTER ENGINE column from drop down , I am not getting anything (it is blank) for FILE,RFC,JDBC,JMS,Mail and SOAP Adapters. But in case of HTTP,IDOC and XI i am getting my adapter engine as Integration Server.
I have checked with basis guy , he is also not able to resolve the issue .
Kindly suggest something on this.
Regards
DheerajTry these
1. Re-import SAP BASIS SWCV 7.0 into Integration repository
2. Apply SAP Note 764176.
3. /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Regards,
Prateek
Maybe you are looking for
-
Help...how do I download my photos from an external hard drive into iphoto
Help, can someone tell me how to download my photos from an external hard drive that was a previous dell computer with windows.. we ditched the dell and got the imac... but I'm lost....please help.
-
How do I restore a custom item in the Search bar?
I have just bought a new comouter. One of the things I want to set up on it is the same set of options in the Firefox Search bar. In my old computer I set up the ARTFL Roget's Thesaurus as as one of the list of options for search engines. (This Thesa
-
Make sure Compressor 3.5.3 uses Qmaster cluster
How do you make sure Compressor 3.5.3 uses the Q master cluster? I know you have to set up Qmaster, but I don't know what the settings are supposed to be. My MacPro 2,1 has 8 cores. Also, how do you tell if your version of Compressor is running as 3
-
SimpleDeserializer encountered a child element..webservice error
when I invoke a webservice using Oracle stored procedure,I'm getting the fault response below : HTTP response status code: 500 HTTP response reason phrase: Internal Server Error <?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope xmlns:soapenv="h
-
Character spacing in SAPscript
Hi, I am displaying a text field on the layout having 40 chars. There is one more field next to this field. When I maintain the value in the text field as say 'WWWWWWWWWWWWWWWWW' etc it takes more display space than when I maintain some normal text,