Adapter Engine Field missing --

Hi All,
I'm trying to create new Communication Channel in our QA system.
I'm using 'Sender File Adapter' But somehow When I choose below option, the last value (Adapter Engine) is blank.
- Adapter type : Sender FILE http://sap.com/xi/XI/System SAP BASIS 7.00
- Transport Protocal : File System (NFS).
- Message Protocal : File
- Adapter Engine : ??????? (Blank)..
We are under PI 7.0 and I did same in Dev but it's not in QA. I think the value of 'Adapter Engine ' should be 'Integration Server'
automatically. Any Idea?
Thanks in advance.

Hi,
Yes, if your adapter reside in the central adapter engine then it should be in the IS.
Adapters that host in different adapter engine, then decental adapter engine need to be selected.
Check you SLD configuration, whether there is an entry for your Adapter Engine or not.
Have a Look on this SAP Note : 764176, do hope it will resolve you problem.
Look for these discussion: Unable to determine name of central adapter engine
Missing Adapter Engine in the XI Domain (in the RTWB view)
Thanks
Farooq.
Edited by: Farooq Farooqui on Jul 31, 2008 7:19 AM
Edited by: Farooq Farooqui on Jul 31, 2008 7:29 AM

Similar Messages

JAVA Adapter Engine is missing in XI 7.0

Hi All,
    I am working on new xi server 7.0 .While the configure time adapter engine was missed.After that we installed service pack 08(for Both ABAP stack & JAVA STACK).After installing also Adapter Engine is not vissibile.
          We installed these service pack 08 files for the java stack.
sap.com SAP-JEECOR 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180132
sap.com CORE-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601105000) SAP AG SAP AG 20060909180127
sap.com SAP_JTECHF 7.00 SP8 (1000.7.00.8.0.20060601105100) SAP AG SAP AG 20060909180133
sap.com BASETABLES 7.00 SP8 (1000.7.00.8.0.20060518071900) SAP AG SAP AG 20060909180134
sap.com JLOGVIEW 7.00 SP8 (1000.7.00.8.0.20060601105200) SAP AG SAP AG 20060909180130
sap.com SAP-JEE 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180140
sap.com LM-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601141123) SAP AG MAIN_APL70VAL_C 20060909180136
sap.com JSPM 7.00 SP8 (1000.7.00.8.0.20060618023100) SAP AG SAP AG 20060909180133
sap.com ADSSAP 7.00 SP8 (1000.7.00.8.0.20060524131300) SAP AG SAP AG 20060909180128
sap.com CAF-UM 7.00 SP8 (1000.7.00.8.0.20060519071848) SAP AG MAIN_APL70VAL_C 20060909180125
sap.com KM-KW_JIKS 7.00 SP8 (1000.7.00.8.0.20060601105400) SAP AG SAP AG 20060909180131
sap.com UMEADMIN 7.00 SP8 (1000.7.00.8.0.20060531093731) SAP AG MAIN_APL70VAL_C 20060909180133
sap.com BI_MMR 7.00 SP8 (1000.7.00.8.0.20060529231100) SAP AG SAP AG 20060909180135
sap.com SAP_JTECHS 7.00 SP8 (1000.7.00.8.0.20060608124200) SAP AG SAP AG 20060909180139
sap.com BI_UDI 7.00 SP8 (1000.7.00.8.0.20060529235200) SAP AG SAP AG 20060909180129
sap.com CAF 7.00 SP8 (1000.7.00.8.0.20060531093727) SAP AG MAIN_APL70VAL_C 20060909180121
sap.com SAP_XITOOL 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180134
sap.com SAP_XIAF 7.00 SP8 (1000.7.00.8.1.20060803090400) SAP AG SAP AG 20060909180125
sap.com SAP-XIAFC 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180128
Please help me..
Thanks,
Gopi

Hi Gopi,
Last time this happened to us, we traced the problem to convoluted CIM data in SLD.
Look at oss note 764176, to see if you have the same symptons.
We deleted all XI related CIM data from SLD, restart our XI systems, and then followed OSS note 764176 to fix the CIM data.
Also please make note that there is a hot fix now for the following
sap.com      SAP-XIAFC      7.00 SP8 (1000.7.00.8.2.20060828165800)      SAP AG      SAP AG      20060919075421
sap.com      SAP_XIAF      7.00 SP8 (1000.7.00.8.1.20060803090400)      SAP AG      SAP AG      20060919075417
sap.com      SAP_JTECHF      7.00 SP8 (1000.7.00.8.1.20060706171200)      SAP AG      SAP AG      20060919075425
sap.com      SAP_JTECHS      7.00 SP8 (1000.7.00.8.1.20060706171300)      SAP AG      SAP AG      20060919075430
sap.com      SAP_XITOOL      7.00 SP8 (1000.7.00.8.2.20060828165800)      SAP AG      SAP AG      20060919075426
Hope this helps/Farshad

Versin iformation for adapter engine is missing in the SLD

Hi,
Just imported my Integration Directory changes into receiving PI System and have come to do the manual activation of the change lists that was asked for. When I do I get the activation cancelling with a message that a communication channel cannot be validated as the version info for the adapter engine is missing in the SLD.
Can anyone tell me what I have to do to get past this problem ?
Many thanks,
Ross

Hello Ross,
It looks compatability problem with the Adapter engine and CC.
Check the system information and apply required patches if require. May be you can go to SAP raising a message.
http://<pihostname>:<port> systeminfo
Regards
Pothana

Adapter Engine field is blank while creating RFC recieving Comm Channel

Dear XI gurus
I have just installed XI server and also did the configuration and everything seems to work fine. I did SLD configuration, mapping etc.,
Then went to Configuration module and am trying to create a sender communication channel (Adapter Type RFC).
The Transport Protocol and Message Protocol fields got automatically filled by 'RFC' and 'RFC (RFC XML)' respectively.
However Adapter Engine field is showing up blank and when I try to select from the drop down menu, it is also blank.
I did search for other postings and tried the following as per the suggestions
Went visual administrator (by clicking on go.bat) and made sure that the cluster->Service and all the services needed for SAP XI Adapters are up and running
I would appreciate if you have any other feedback on this problem.
Thanks
Ram

Thanks a lot for your response, I will try that again and will let you know.
Meanwhile I also followed tech note 1031321 which said the following.
2. To register the Adapter Engine, you have to restart the following applications:
sap.com/com.sap.aii.af.app
sap.com/com.sap.aii.af.cpa.app,
But this didn't help. I will try your suggestion

Adapter Engine Component Missing

Hi All,
In the Integration Directory, The Adapter Engine field dropbox is not showing the central Adapter Engine component.Because of this the adapters (other than HTTP and IDoc adapters)can't be used during configuration.
Can anyone help?
Thanks and Regards,
Soumya

Hi Soumya,
Go thru following document from service.sap.com , it may help you about Adapter Engine Components are configured or not .
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps
Regards,
Moorthy

Communcation channel - Adapter engine field is empty.

Hello Gurus,
After pointing XI to a seperate SLD, the Adapter engine field (the pull down) in the "Communication channel" is empy. The adatpers are visible and no problem there. The business systems apprears to be O.k in the new SLD. We perfomed a export of technical and Business systems from old SLD and new SLD.
Help will be awarded with points.
-N.S

Hi,
Refer this blog:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Regards
Suraj

Adapter Engine URL missing in RWB

Hi All,
In my newly configured PI 7.0 system, the Adapter Engine URL is missing at the fol. location:
RWB -> Component Monitoring -> Adapter Engine -> Test Message.
But when I open SXI_CACHE -> AE Cache, I am able to see the url http://pidev:50000/MessagingSystem/receive/AFW/XI
I think that this means that my ABAP stack is configured properly, but JAVA stack has some problem for Adaptr engine.
Please confirm if I am right and how to resolve this.
regards,
Piyush

Hi,
Are you using the FQHN?
Check also note #764176 if you have components missing on SLD.
Last, you may want to configure your system in order to check each of the steps.
Use this link -> Wizard-Based Basic Configuration:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
Regards,
Caio Cagnani

Adapter Engine field is empty

Hi all,
1. When creating Communication Channel in ID , "Integration Engine" field coming as empty when file adapter is selected. It is shwoing error msg when saving the CC. Why it is coming as empty? and how to resolve it?
2. When selecting the IDOC adapter in Communication Channel only "Receiver" option is enabled and "Sender" option is disabled. What to do for "Sender" option also to be enabled?
regards,
Khaja.

Hi,
Check if post installation is done properly.
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Also check in SXMB_ADM and check for Integration Server configuration is fine.
Thanks,
Prakash

Adapter engine field blank in File Comm channel (Sender)

Hi,
I am not getting any value in drop-down list of adapter engine in file adapter communication channel.System is allowing me to save the comm channel but when I am trying to create sender agreement, system is giving me following error
<b>Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.s01., string], target element type: SAP_XIIntegrationServer)</b>
I m getting values of adapter engine when I select some other adpter like IDOC or RFC.
Please help...

Hi,
1) Can you check your Post Installation.
2) Look for SAP NOTES.
3) Try cache refresh
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
If you still face issue try this .
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss

Adapter engine field blank in RFC Comm channel (Sender)

Hi Friends,
I am not getting any value in drop-down list of adapter engine in RFC adapter sender communication channel.System is allowing me to save the comm channel , system is giving me following error
No adapter engine specified
I m getting values of adapter engine when I select some other adpter like XI.
Thanx
Anand

Hi,
The RfcAdapter is implemented as a J2EE Service and thus this service has to be started and stopped. This will affect the whole RfcAdapter and can be done from the J2EE Engines Visual Administrator. When you are connected to the J2EE Engine choose the tab 'Cluster' and open the appropriate server node in the tree. Then open the 'Services' node. There you can see the entry 'SAP XI Adapter: RFC'. When you open the context menu on this entry you can start and stop the service
Regards
Chilla...

RFC Adapter: Adapter Engine Field Blank

Hi all,
Could anyone guide me through troubleshooting this one: When creating a RFC communication channel the listbox for the Adapter Engine is empty so I cannot select Integration Server as in other channels. All I know is that this might come from a messed-up SLD.
What do I need to look for? Any help is really appreciated.
Eugen.

Hilbert,
Thanks a lot for your answer. It kept me looking for more OSS notes and #764176 actually solved this problem.
Eugen.

RFC Adapter Problem: Adapter Engine Field Blank

Hi,
I want to invoke a BAPI defined on a R/3 system. I am trying to create a RFC Adapter in the Integration Directory by creating a communication channel.
The problem I am facing is that when I define the Adapter Type as RFC, the Adapter Engine dropdown list is blank and it does not contain any entries.
On passing a document through XI, I can see the following error in the monitor:
<SAP:Code area="INTERNAL">ADAPTER_NAME_INVALID</SAP:Code>
<SAP:P1>RFC</SAP:P1>
<SAP:P2>PLSRV_CALL_ADAPTER</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unknown receiver adapter (name = RFC)</SAP:Stack>
what do i need to configure on the XI and R/3 side ?
thanks,
Manish

i followed the steps but i am not getting the populated adapter engine list.
Actually, the Association shows a list of logical systems to be added (Application System, BC Application Server, BC Central Server Instance .....). I experimented with many systems but it is not working.
My basic problem is I need to call a BAPI from XI. The XI monitor shows the error :
Adapter Name Invalid.
Unknown Receiver Adapter (name=RFC).
Now, for the RFC adapter, I have not given it any name. My Communication Channel is called GeneratedChannelRFC. I am not sure where this error is coming from. I would appreciate any help to solve this error.
thanks,
Manish

"Adapter Engine is missing in Communication Channel".

Hi Experts,
I am Unable to Find out the Adapter Engine As Integration Server in the File Sender Communication Channel.
please let me know
Regards
Khanna

hi,
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
note : points pls if it helps you

Missing Adapter Engine in the XI Domain (in the RTWB view)

Team,
I am running at in a bizarre situation at a client site. We have one SLD that is shared by 2 XI installations (a POC and a SandBox).
In the POC (in run time workbench view), I can see all the XI component (integration engine, BPM engine, Adapter engine, etc) under it's domain.
In the SandBox, the Adapter Engine is missing ...
We have applied the #764176 note. It has terminated successfully (no error), but we are still in the same situation - the Adapter Engine is missing ...
We have imported (the SWCV basis 7.0 and the ABAP 7.0).
Are we missing something?!?!
Thank !
A+

Hi Naveen,
We have ran (and setup) the RZ70 trx successfully.
In the SLD the Business System for our sandbox is present (as the same for our POC business system). All authorizations are in.
The basis guy, at installation time, has given an existing SLD. He does not remember at the end of the installation if the adapter was missing or not (I was not there a the time of the installation, but I presume that it was OK).
Later in the week, they (customer) decided to switch the XI sandbox to another SLD. The adapter is missing in action since then.
Still does not work ;-(
Is there a way i can see (or attach) a couple of screen shot of my error ?
Thank in advance
A+

Missing Audit Log of Adapter Engine in Message Monitoring

Hi!
I've a problem with a fresh installed PI:
The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
What can cause this behaviour?
Best regards,
Daniel

Hi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel

Adapter Engine Field missing --

Similar Messages

Maybe you are looking for