Adapter Engine In Communication Channel Creation

Hi All,
Im trying the first scenario in new PI 7.0 server.
When i tried to use a file adapter, after selecting the transport and msg protocol..
In the adapter engine..I dont see anything in the drop down..
can u pls help me out on this..has ne one faced such a situation?
I have to start development as soon as possible..
Regards,
Teja

Im trying the first scenario in new PI 7.0 server.
In the adapter engine..I dont see anything in the drop down..
Some configuration missing......Check page-129 of this document:
https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E
From the above document check:
Adapter Engine Not Visible in SLD, RWB, and Directory
Regards,
Abhishek.

Similar Messages

No Integration Server under Adapter Engine at Communication Channel

Hello all,
This is new PI7.0 install.
I configured a file Adapter communication channel for an Integration Scenario.
At field "Adapter Engine" under Parameters tap I am not able to select the Integration Server.
Pull down menu is empty.
I did sxmb_adm and blog 6077 that got "Integration Server" in file adapter. Later to that file to file scenario worked yesterday. However after java+abap stack complete restart (to cleanup unwanted manually created business system of type WEB AS ABAP) the problem came back today.
I repeated again same blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory   sxmb_adm, sldcheck, rz70 all looks good, but no luck.
There is a note from forum to change the content maintenance under
SLD->Administration->Content Maintenance->Subset (Landscape description)...
Need some pointers on what to change & get the file adapter to work? Thanks.
Another observation is all adapters got empty menu (no Integration Server). However IDOC, HTTP got integration server populated.
====================
Re: No Integration Server under Adapter Engine at Communication Channel config
Posted: Sep 12, 2007 4:46 PM    in response to: Jochen Schertel
Hi All,
the problem was related to missing some Associations under Contend Maintenance for the Integration Server.
After implementing again, the problem was solved!
Regards,
Jochen
====================

Hi Jochen,
Can you please check following parameters in sxmb_adm on your application server.
Goto TC : sxmb_adm...select Integration Engine configuration n check whether you have maintained global configuration data as
Role of Business System : Application system
and Corresponding Integ. Server : http://xi hostname:port/sap/xi/engine?type=entry
Also check if you have created following RFC destinations:
1. INTEGRATION_DIRECTORY_HMI(H)
2.LCRSAPRFC (TCP/IP)
3.SAPSLDAPI
Nilesh
Nilesh

PI 7.0: Error when calling an adapter by using communication channel

Hello Experts,
We have a mapping scenario for ERP -> PI -> web service. Few details from ERP will be sent via PI to Web service.
Once the web service authenticates, token and sign will be generated. Here an RFC adapter is used for configuring the RFC receiver communication channel and provided the ERP system logon details at the RFC client parameter.
An error is received as mentioned below.
Error while lookup Exception during processing the payload.Problem when calling an adapter by using communication channel CC_Rcvr_RFC_Lookup_TokenSign (Party: , Service: BS_QV6_700, Object ID: 54e904ebf3d7382a84a0f83cd292b810)
XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>'. com.sap.aii.mapping.lookup.LookupException
The logon details in RFC parameter are corrected. Re-activated the the communication channel and refreshed the cache.
But still the error is not resolved.Please let me know if there is anything else i need to check.
Thanks in advance.
Regards,
Sri

Hello,
You could also check note 730870 FAQ XI 3.0/ PI 7.0/ PI 7.1 RFC Adapter
Q 16:
While sending a message to the RfcAdapter the error "...functiontemplate from repository was <null>" is shown. Which reasons are possible?
Regards,
Sarah

Communication channel creation - Adapter typr missing

Hi
Im trying to create a communication channel between XI and ECC system and also XI and third part application.
I imported the .TPZ file and Im trying to create a communication channel between XI and ECC.I click on create communication channel under the business system ECC.
But after giving the communication channel name im unable to get any adapter type. There are no adapters here. Where should I configure this?
Thanks
Subbu

Hi,
To see the List of all the Adapter in Adapter list while creating the CC in ID, we have to Import the SAP BASIS 7.00 .TPZ file into IR
Steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
Now the adapters should get displayed.
Thanks
Vikranth

Alert if no file process :Same file adapter with same communication Channel

Hi XI Guru,
I have encountered 1 requirement from my client where, sender will send different data file with different file name. And there want XI to alert the user if no file to process for the schedule date. Please take note that the communication channel is common to all the sender.
Example:
Communication Channel : CC_FILE_SND
FILE_10.TXT ---> Every month on the 10, user have to send FILE_10.TXT to process
FILE_20.TXT ---> Every month on the 20, user have to send FILE_20.TXT to process
If user fail or forget to send the FILE_10.TXT and FILE_20.TXT on special schedule date to process, XI should alert user.
Many thanks

Hi Lord
<<< there want XI to alert the user if no file to process for the schedule date.
Can you tell me how you are planning to configure this schedule date in your sender file adapter. I mean this date will be fixed or it is going to be change according to the requirement.
Now for the second part in order to alert the user if file is not there, one solution is to use BPM with wait step ( specify the time in this step ), but then again it takes me back to my previous question, the time seems to be different everytime according to the requirement.

In the XI Szenario i cannot assign Adapter Engine in Communicationchannel

Hi There,
i have a new problem. I imported now the whole Scenario from my XI Cons System into the XI Prod System.
After that i have to reconfigure the Communication Channels.
URL etc.. but in Prod System i cannot Assign Integration Server to Adapter Engine..
i maked a screenshot so you cann see what i mean:
(If you cannot see the screenshots.. please provide me a Mail Adress.. then i can send them to you)
This is our Consolidation System:
http://img16.imageshack.us/img16/7546/xik1.jpg
You see what i mean in the read mark.
And here you can see our Prod System.. i cannot Assign here the Integration Server...
http://img14.imageshack.us/img14/4581/xip1g.jpg
Can you tell me whats wrong here?
Thanks
Bjoern

Hi,
please check this threads, this may help you
Can not select Integration Server for Adapter Engine in File adapter
No Integration Server under Adapter Engine at Communication Channel config
Regards,
pradeep A.

Communication channel parameters for XI receiver adapter

Hi
I am implementing a ABAP server proxy - to do this, I am creating a XI adapter type - Receiver communication channel so that messages from XI go to ---> the R3 system wherein the proxy is implemented.
I have seen a weblog with a sample defn of communication channel of this adapter type , but the illustration there is not clear enough.
Based on documentation for this in help.sap.com, I have the following questions :
1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
Any pointers on what am I missing here ??

Hi Karthik,
>>1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
Based on 'addressing type' field in XI adapter you can either specify HTTP destination in communication channel or provide all the required details in the communication channel itself.
>>2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
use the URL /sap/xi/engine?type=receiver
Also make sure that your R/3 is set up as a local integration engine for proxy communication..
Check this..
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Regards
Anand

Sender Soap Adapter communication channel error

Dear Experts,
When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
"Processing Errors in the Last 50 Minutes"
Thanx in advance

Aamir,
My other interface is working fine by giving the following url:
http://kpmgvm015:8001/XISOAPAdapter/MessageServlet?channel=:KPMG_AU_ALL:RetrieveOpportunityRecord_SOAP_Sender
I am not using the propsed url.
Moreover when i try to give this url in the browser . It is asking of user id and password.
I am giving user as : PIAPPLUSER.It gives message servelet is ok.
In my communication channel monitoring the corresponsing communication channel:
RetrieveclientRecord_SOAP_Sender is in Red - Processing Errors In the Last 40 Minutes
Error meesage in Webclient:
java.security.AccessControlException: PIAPPLUSER has no permission for accessing binding com.sap.aii.af.service.cpa.Binding@d046043a

Steps for http receiver adapter communication channel

Hi
can you please specify steps for http receiver communication channel?
thanks
Prasad

Hi Prasad,
Here's the documentation for configuring the http adapter in the communication channel(rcve):-
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm
Regards,
Sushumna

Adapter Engine not working

Hi,
I've found the follonwin log error Monitoring the Adapter engine cache:
11-may-2006 17:13:25 - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.imhotep, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
Any ideas? We have tried almost everything...
Thanks and Regards.

Hi Isabelle,
Check the link and reply of Manish Balla and also Antonio Dos, the same issue was reolved and answered.
No Adpater Engine available in Communication Channel creation
Regards,
sridhar
Message was edited by: sridhar reddy kondam

No values in the dropdown for Adapter Engine

Hello Colleague,
While configuring a sender adapter engine in the integration directory, there are no value displayed when we select an Adapter and do a dropdown on the "Adapter Engine" Field.
Could you pls. help.
Regards,
Gajendra.

Hi Gajendra,
Have you imported the SAP_BASIS content into yor repository?? If not do that.
Also you can go through the below thread
No Adpater Engine available in Communication Channel creation
Regards
Sunita

Message do not exists in adapter engine

I have a message being sent to IE via JMS Adapter . In Communication channel monitoring i could see the message Id & error message(Error in converting Binary message) but with that message id i could not find any entry in Message monitoring - > Adatpter Engine. Moreover , In communication channel monitoring the id with which the message failed is not hyperlinked to "Message Display Tool (Detail Display) ".
I need the message which is failed.
Thanks ,
Satish

It may be possible that message came into error as soon as it was picked by the sender channel. Could you see some error for these messages in Communication channel monitoring? Another possibility is your message is persisted in the adapter engine for very short duration. In that case, if it is archived, you may select the Archive option in Message Monitoring instead of Database option.
Regards,
Prateek

Communication Channel Status Is Shwoing RedLed(Error)

Hi,
I used File Adapter in my communication channels that is FTP ... scenario is working fine.. but in the RWB- Communication Channel Monitoring the Communication cHannel is showing RedLed(ERROR Status)
The FTP server was running on UNIX.. that is Bourne Shell ... If the file is there in the source directory it was processing successfully.. even though the remaing all the time it was throwing the following Error Mesage in the RWB-Communication Channel Monitoring..
Could not process file 'SIMS-10.xml: No such file or directory': com.sap.exception.standard.SAPIllegalArgumentException: The parameter "argument" has the value "ftp://10.25.10.6:21./SIMS-10.xml: No such file or directory", so it contains the character "ftp://10.25.10.6:21./SIMS-10*.xml: No such file or directory" which is not allowed
Please Suggest me.
Regards
Jain

Hi ,
We are polling a particular FTP site for files. If file is found communication channel is showing green led with no error message, but when file is not found it is showing red led with an error message in RWB .
My concern :
1. We applied the same approach in other scenarios also , but never came across this type of situation. In other cases if file is not found, communication channel is not showing red led and error message , so this is a metter of real concern to me.
2. I believe that if communication channel is showing red led then definately alerts will get triggered for any error in adapter engine . correct me if wrong ...?
the only difference i found is the shell on which FTP site is configured...We are getting error in bourne shell but no errors in Korn shell ,,,Our XI box is on HP-UX but FTP site is on Solaris 2.8
Is it a bug In PI 7.0 ....?or Something is missing from FTP site ? or some configuration missing at configuration channel level.
Regards

Regarding the JDBC Communication Channel error

Hi all,
We installed one non-central adapter engine for our xi server. But when configuring jdbc channels with this non-central adapter engine, the jdbc channel not picking data from tables, instead it is always showing message "Processing Started". All the channels configured with central adapter engine are working fine. Basis person is working on this problem for 10 days, he didn't find any solution. Pls help us.
Note:-when we start the channel configured with non-central adapte engine, the channel is automatically getting lock in visual admin. Even though we will release the lock manually, after starting once again it is getting locked again.
thanks,
madhusudhan.

hi,
Is your decentral adapter engine working fine for other communication channels.There might be some problem in your decentral adapter engine installation.
You can refer to my blog on this.
Basic Steps In Decentralized Adapter Engine
regards,
ujjwal kumar

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

Adapter Engine In Communication Channel Creation

Similar Messages

Maybe you are looking for