"Adapter Engine is missing in Communication Channel".

Hi Experts,
I am Unable to Find out the Adapter Engine As Integration Server in the File Sender Communication Channel.
please let me know
Regards
Khanna

hi,
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
note : points pls if it helps you

Similar Messages

Versin iformation for adapter engine is missing in the SLD

Hi,
Just imported my Integration Directory changes into receiving PI System and have come to do the manual activation of the change lists that was asked for. When I do I get the activation cancelling with a message that a communication channel cannot be validated as the version info for the adapter engine is missing in the SLD.
Can anyone tell me what I have to do to get past this problem ?
Many thanks,
Ross

Hello Ross,
It looks compatability problem with the Adapter engine and CC.
Check the system information and apply required patches if require. May be you can go to SAP raising a message.
http://<pihostname>:<port> systeminfo
Regards
Pothana

JAVA Adapter Engine is missing in XI 7.0

Hi All,
    I am working on new xi server 7.0 .While the configure time adapter engine was missed.After that we installed service pack 08(for Both ABAP stack & JAVA STACK).After installing also Adapter Engine is not vissibile.
          We installed these service pack 08 files for the java stack.
sap.com SAP-JEECOR 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180132
sap.com CORE-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601105000) SAP AG SAP AG 20060909180127
sap.com SAP_JTECHF 7.00 SP8 (1000.7.00.8.0.20060601105100) SAP AG SAP AG 20060909180133
sap.com BASETABLES 7.00 SP8 (1000.7.00.8.0.20060518071900) SAP AG SAP AG 20060909180134
sap.com JLOGVIEW 7.00 SP8 (1000.7.00.8.0.20060601105200) SAP AG SAP AG 20060909180130
sap.com SAP-JEE 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180140
sap.com LM-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601141123) SAP AG MAIN_APL70VAL_C 20060909180136
sap.com JSPM 7.00 SP8 (1000.7.00.8.0.20060618023100) SAP AG SAP AG 20060909180133
sap.com ADSSAP 7.00 SP8 (1000.7.00.8.0.20060524131300) SAP AG SAP AG 20060909180128
sap.com CAF-UM 7.00 SP8 (1000.7.00.8.0.20060519071848) SAP AG MAIN_APL70VAL_C 20060909180125
sap.com KM-KW_JIKS 7.00 SP8 (1000.7.00.8.0.20060601105400) SAP AG SAP AG 20060909180131
sap.com UMEADMIN 7.00 SP8 (1000.7.00.8.0.20060531093731) SAP AG MAIN_APL70VAL_C 20060909180133
sap.com BI_MMR 7.00 SP8 (1000.7.00.8.0.20060529231100) SAP AG SAP AG 20060909180135
sap.com SAP_JTECHS 7.00 SP8 (1000.7.00.8.0.20060608124200) SAP AG SAP AG 20060909180139
sap.com BI_UDI 7.00 SP8 (1000.7.00.8.0.20060529235200) SAP AG SAP AG 20060909180129
sap.com CAF 7.00 SP8 (1000.7.00.8.0.20060531093727) SAP AG MAIN_APL70VAL_C 20060909180121
sap.com SAP_XITOOL 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180134
sap.com SAP_XIAF 7.00 SP8 (1000.7.00.8.1.20060803090400) SAP AG SAP AG 20060909180125
sap.com SAP-XIAFC 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180128
Please help me..
Thanks,
Gopi

Hi Gopi,
Last time this happened to us, we traced the problem to convoluted CIM data in SLD.
Look at oss note 764176, to see if you have the same symptons.
We deleted all XI related CIM data from SLD, restart our XI systems, and then followed OSS note 764176 to fix the CIM data.
Also please make note that there is a hot fix now for the following
sap.com      SAP-XIAFC      7.00 SP8 (1000.7.00.8.2.20060828165800)      SAP AG      SAP AG      20060919075421
sap.com      SAP_XIAF      7.00 SP8 (1000.7.00.8.1.20060803090400)      SAP AG      SAP AG      20060919075417
sap.com      SAP_JTECHF      7.00 SP8 (1000.7.00.8.1.20060706171200)      SAP AG      SAP AG      20060919075425
sap.com      SAP_JTECHS      7.00 SP8 (1000.7.00.8.1.20060706171300)      SAP AG      SAP AG      20060919075430
sap.com      SAP_XITOOL      7.00 SP8 (1000.7.00.8.2.20060828165800)      SAP AG      SAP AG      20060919075426
Hope this helps/Farshad

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

Adapter Engine Field missing --

Hi All,
I'm trying to create new Communication Channel in our QA system.
I'm using 'Sender File Adapter' But somehow When I choose below option, the last value (Adapter Engine) is blank.
- Adapter type : Sender FILE http://sap.com/xi/XI/System SAP BASIS 7.00
- Transport Protocal : File System (NFS).
- Message Protocal : File
- Adapter Engine : ??????? (Blank)..
We are under PI 7.0 and I did same in Dev but it's not in QA. I think the value of 'Adapter Engine ' should be 'Integration Server'
automatically. Any Idea?
Thanks in advance.

Hi,
Yes, if your adapter reside in the central adapter engine then it should be in the IS.
Adapters that host in different adapter engine, then decental adapter engine need to be selected.
Check you SLD configuration, whether there is an entry for your Adapter Engine or not.
Have a Look on this SAP Note : 764176, do hope it will resolve you problem.
Look for these discussion: Unable to determine name of central adapter engine
Missing Adapter Engine in the XI Domain (in the RTWB view)
Thanks
Farooq.
Edited by: Farooq Farooqui on Jul 31, 2008 7:19 AM
Edited by: Farooq Farooqui on Jul 31, 2008 7:29 AM

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Adapter Engine URL missing in RWB

Hi All,
In my newly configured PI 7.0 system, the Adapter Engine URL is missing at the fol. location:
RWB -> Component Monitoring -> Adapter Engine -> Test Message.
But when I open SXI_CACHE -> AE Cache, I am able to see the url http://pidev:50000/MessagingSystem/receive/AFW/XI
I think that this means that my ABAP stack is configured properly, but JAVA stack has some problem for Adaptr engine.
Please confirm if I am right and how to resolve this.
regards,
Piyush

Hi,
Are you using the FQHN?
Check also note #764176 if you have components missing on SLD.
Last, you may want to configure your system in order to check each of the steps.
Use this link -> Wizard-Based Basic Configuration:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
Regards,
Caio Cagnani

IDOC adapter is not shown in communication channel

hi gurus,
at present i am using PI and in the communication channel list (adapters types) no idoc adapter is displayed ,can anyone help me to solve this problem.
and also when i create any scenario related to idoc those messages where not displayed in communication channel.

Hi Allen,
U r checking for an IDoc channels in Communication channel monitoring.IDoc adapter is reside in ABAP stack.So that u cant see the Idoc communication channels from monitoring of CC's. If Idoc messages is at sender side no need of CC.
If you want to view the source and target messages of Idoc's u can see those from SXMB_MONI.Choose u r processed message,Dbl click,For Idoc as sender u can view the message from payloads of Inbound message,For Idos as Receiver u can view the message from Payloads of Request message Mapping.
Hope it will helps..
Cheers
Veera
>>>Reward points,if it is needful

XI communication channel missing in communication channel monitoring

Hello partners,
I have a problem with communication channel monitoring.
I have defined a communication channel of Adapter Type = "XI" in the integration directory.
I have also sent messages successfully via this communication channel.
But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
Can someone tell me how I can get monitoring info of an "XI" communication channel?

Hi,
From SP17, you have a new feature
http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
<i>The Runtime Workbench has the following new functions:
● Component monitoring: Communication channel monitor
In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
Regards,
Bhavesh

Adapter Engine Component Missing

Hi All,
In the Integration Directory, The Adapter Engine field dropbox is not showing the central Adapter Engine component.Because of this the adapters (other than HTTP and IDoc adapters)can't be used during configuration.
Can anyone help?
Thanks and Regards,
Soumya

Hi Soumya,
Go thru following document from service.sap.com , it may help you about Adapter Engine Components are configured or not .
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps
Regards,
Moorthy

JMS communication channel red

Hi all,
I have configured the JMS sender communication channel in ID. but the status is red. When i configured the JMS Adapter in Decentral adapter engine(with same details),the status is green.
Please help me out.
The error says that " Sender channel : details null"/
What should we do so as to make our communication channel green?
Need clarifications:
Communication channel config happens in central adapter engine....When i use decentral adapter engine, should i define communication channels also....
If yes, then it will be something like we are making use of both adapter engines right.
please correct me if i'm missing something.
Thanks and regards
rahul

Hi Venkat,
I tried the manual process. The document says that the meta-inf and server folder should be maintained in the sda file including the sub files and the path should be maintained for those sub files....But if i save the path info in the zip file, its returning error when i try to deploy(Error: attribute missing,vendor missing).
On removing the path info,i'm able to delpoy but the adapter status is red.
My SDA structure is not same as the one specified in the document.
i am not getting the meta-inf and server folder in that zip file.only the sub files are included.
please correct me if i am wrong.
Regards
rahul

Load balancing Central Advance Adapter Engine

Hello All,
I am trying to get more information on load balancing Central Advance Adapter Engine for SAP PI 7.1. How do I configure and load balance Advance Central Adapter Engine to handle more volume? Should I added extra non-central adapter engines to achieve this? If yes, How do I do this i.e. configuration etc? If not, then what is the best practice on load balancing the Central Advance Adapter Engine?
Thank you for replying,
Mayur

Hi,
I just post your Q&A here.
Cheers,
Aaron
I have few follow up questions regarding your answers.
1. For options 1 and 2, could you elaborate or point me some documentation on sap.help or somewhere else which talks more about these options?
   =========================================
   Basically you have more power with more processes (Instances or Server node) to process your messages in the Adapter Engine. That's the way to improve the system throughput.
   For more information, please refer to SAP PI tuning guide (I could not find the guide for 7.1, but the principle is still the same)
   https://websmp102.sap-ag.de/~sapidb/011000358700000592892005E.PDF
=========================================
2. For option 3, add non central adapter engine and configure scenarios.
    1. So, do I have to run non-central adapters on separate servers?
   ====================
    Yes. It is recommended to run non-central adapter enging on separate server to minimize the reciprocal impact in terms of resource contention.
   ==============
    2. Do I need web dispatcher to do the load balancing between central and non-central adapter engine?
    ========
    No. this is also not possible since the below is true.
    =========
I somehow think that if I am selecting the non-central adapter engine when creating the communication channel then it won't be "load balancing" because I will be sending a particular interface to the non-central engine at design time instead of runtime.
Thank you for taking time and replying to my questions.

Abap tables for adapter engine errors

Hello,
Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables?
Any help is very much appreciated.
Thanks
MLS

Hello,
What I am trying to do is write a report in ABAP, which will read the table for errors (for messages which are not processed successfully in Integration engine or adapter engine) and email those errors to users. If there is communication channel error in RWB, the message in sxmb_moni is still shown as success and is not being updated in table SXMSPERROR.
We cannot use PI Alerts here since the email list is dynamic for the same PI interface.
Any ideas on how to accomplish this?
Thanks
MLS

Communication channels path For testing ?

For testing communication channels one path is there what is that path ?
There all adapters are there based on our adapter type we can click that adaper and check weather our communication channel is correct or not? i need that path.

Hi,
Yep, You can test & see all the Adapters those are up and running in the following path
1) goto Integration Builder by opening http://hostname:port/rep
2) Click on Runtime workbench
3) Click on Component monitoring
4) Click on Display
5) Click on Adapter Engine
6) Click on Communication channel monitoring
Here you are able to see all the Communication channels .......and you can check the error or success messages also....
Regards
Seshagiri

Missing Audit Log of Adapter Engine in Message Monitoring

Hi!
I've a problem with a fresh installed PI:
The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
What can cause this behaviour?
Best regards,
Daniel

Hi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel

"Adapter Engine is missing in Communication Channel".

Similar Messages

Maybe you are looking for