Adapter Engine Name is not displayed in Communication channel

Hi All,
In Integration Directory -- Service without party -- Business system -- communication channel -- when we create new communication channel  then go ahead selecting File , JDBC, Mail adapter. ADAPTER ENGINE IS DISPLAYED BLANK.
Please let me know your valuable inputs.
Regards
Shiva

I have performed all the above given instructions, but the issue is still pending.
Steps followed :
1. Performed all the steps in RZ70 as instructed.
2.Downloaded the TPZ file and assigned it in the required path
3.Adapter Engine is already assigned in the SLD.
Can you let me know, whether to assign hostname, IPaddress or fully qualified domain name in the exchange profile( where exactly in JAVA stack and ABAP stack)
Kindly request you to provide further inputs.
Thanks for your valuable inputs
Regards
Shiva

Similar Messages

  • Adapter engine cache is not display in sxi_cache PI7.1

    Hi All expert  ,
    I am doing post installation step for Pi7.1 . during initial setup configuration . I have got error message . u201CProtocol of Step 'Executing BAPI SXMB_SET_ROLE_TO_ISu201D .  I have try to resolve this error but I am not able to do so  skip this step and completed resume setup .
    after that I have check in SXI_CACHE, here I found that adapter engine cache is not display.  please help me to resolve this issue.
    Regards,
    Amit

    Hi
    Answer is pure assumption
    I checked the service.sap.com and found a OSS note related "BAPI SXMB_SET_ROLE_TO_IS"
    Pls check the OSS note - Note 1319873 - PI CTC: Error in "Executing BAPI SXMB_SET_ROLE_TO_IS"
    Pls take opinion from SAP / Basis before implementing the OSS note
    Regards
    Madhan D

  • New channels in integration directory not displayed in communication channel monitoring

    Hi all,
    We configured recently new communication channels in the intgration directory (PI 7.0), and all changes were activated. But when we check in the communication channel monitoring, we cann't see them.
    Any idea please.
    Many thanks in advance

    Hi,
    Might be issue with cache.
    can you validate as per below thread?
    Communication channel not showing in CC monitoring
    Regards,
    muni.

  • IDOC adapter is not shown in communication channel

    hi gurus,
    at present i am using PI and in the communication channel list (adapters types) no idoc adapter is displayed ,can anyone help me to solve this problem.
    and also when i create any scenario related to idoc those messages where not displayed in communication channel.

    Hi Allen,
          U r checking for an IDoc channels in Communication channel monitoring.IDoc adapter is reside in ABAP stack.So that u cant see the Idoc communication channels from monitoring of CC's. If Idoc messages is at sender side no need of CC.
    If you want to view the source and target messages of Idoc's u can see those from SXMB_MONI.Choose u r processed message,Dbl click,For Idoc as sender u can view the message from payloads of Inbound message,For Idos as Receiver u can view the message from Payloads of Request message Mapping.
    Hope it will helps..
    Cheers
    Veera
    >>>Reward points,if it is needful

  • In my integration directory adapter engine parameter was not appear forJ2EE

    In my integration directory adapter engine parameter was not appear forJ2EE engine.It appears for IDOC and HTTP Adapters.
    Please clarify ASAP..
    Thanks

    Hi Chiru,
    You mean to say that, In ur Communication channels based on J2EE Engine like File, RFC,etc u are not able to see Adapter Engine Type Parameter Value as Integration Server.
    Reimport SAP BASIS Software Component once again in to repository and restart the Application Server and check.
    Regards,
    Sudharshan

  • Caller Name is not displayed on incoming calls on Classic

    When I receive a call on my new Classic on 10.3.1.1779 the caller's name is not displayed even thought they are a saved contact.  What can I do please?

    Hi and Welcome to the Community!
    While not perhaps the same OS as you reveal (though you revealed SR, not OS), here is a KB that discusses that error:Article ID: KB35720 After upgrading to BlackBerry 10 OS version 10.2.1.1925 Caller ID is not linking to the Address BookHopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you. Also:Article ID: KB23393 How to find the model number and OS version on a BlackBerry smartphoneYou will need to understand the difference between OS and SR if you proceed further...official methods use SR, while the unofficial methods (including discussions in this forum) rely on OS. The most common thing to do after an update that results in issues (or if the OS you have is not functioning correctly) is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you start any of this you will want a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that.
    Good luck and let us know!

  • The portlet name is not displayed in the portlet drop down list ?

    Hi,
    I use Sun Java System Portal Server 6 2005Q4 for windows 2000 server , use the following command to deployo portlet,
    I am not sure if I successfully deploy the portlet?
    pdeploy deploy -u amAdmin -w amadmin -p amadmin -d "cn=amldapuser,ou=DSAME Users,dc=icheng,dc=com" C:\Sun\PortalServer\tmp\portlet\portletsamples.war
    The message I got after execute the pdeploy command is =>
    Deploys the portlet war file and inserts the provider into display profile..
    OPTIONS
    --help Help message (false)
    -u --runasdn UID Bind DN (none)
    -w --password Password (none)
    -p --wc_password Password for WebContainer's Admin (none)
    -i --instance WebContainer's Instance into which the war file is to be deploye
    d (*)
    -d --dn LDAP DN of the target node (*)
    -g --global Global display profile (false)
    -r --rolesfile File containing the DSAME and portlet role mapping (*)
    -f --userinfofile File containing the user info mapping (*)
    -v --verbose Generate debug messages (false)
    -V --version Generate version information (false)
    -l --locale Locale information (en_US)
    OPERAND
    Specifies a path to the war location.
    Deploying to IWS
    Is this mean that successfully deploy the portlet ?
    After I deploy the portlet, I login to Access Manager, select the "service" from view, click the portal desktop,
    click "Manage Channels and Containers", click the "New Portlet Channel...", then click the portlet drop down list,
    the portlet name is not displayed in the portlet list.
    How can I make the portlet name displayed in the portlet drop down list ?
    Can someone help me ?
    Thanks!

    Hi
    According to your description, since this is SQL Server forum, as Olaf Helper’s post, could you get the correct result if you execute the following query in SQL Server Manager Studio (SSMS)?
    select UserName from aspnet_Users where UserId in(select FreindId from myFreinds where UserId in(select UserId from aspnet_Users where UserName = '<your typed name>'))
    If you cannot get the correct result in SSMS, I recommend to check the Transact-SQL statement. Apart from the error message, we also need to know the table structure, data, join relationships between tables for further analysis.
    However if there is no problem in SQL Server query, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
    http://forums.asp.net/ . It is appropriate and more experts will assist you.
    In addition, there is detail about listbox control in asp.net. You can review the following links:
    How to Bind/Load/Fill ListBox with Sql Server Database in asp.net：http://www.webcodeexpert.com/2013/07/how-to-bindloadfill-listbox-with-sql.html#.U5f75_6KCM9
    How to get multiple selected value in ListBox control - ASP.NET using C#:
    http://www.dotnetfox.com/articles/how-to-get-multiple-selected-value-in-listbox-control-Asp-Net-using-C-Sharp-1047.aspx
    Thanks
    Lydia Zhang

  • In query, turkish column name is not displayed correctly?

    In my characteristic and key figure infoobjects , i used turkish characters for explanation but in Bex they are displayed as illegal characters for column names.
    How can i correct this or where would i make a mistake?
    Thanks.

    Hi Tuncer,
    I am dealing with the same problem you had.
    Turkish characters in the column names, infocube names are not displayed although in BW turkish characters are displayed properly. Did you solve your problem about Turkish characters in column names.
    If you could solve, I would be glad to hear your solution.
    Thank you.
    Mehmet Cekdemir

  • The Japanese file name is not displayed.

    I'm using Mac OS 10.5.3(intel)/Adobe Media Player 1.0
    In "Personal Videos",The Japanese file name is not displayed.
    Example, "日本語.flv" is added, ".flv" is displayed in "Personal Videos".

    Thank you for reply.
    >Try this: Go to the Apple menu > System preferences > International > Languages. Add Japanese to the list of languages, if it does not appear there already. If you drag Japanese above English in the list, the finder and many other applications will open next time with Japanese menus. Even if you do not want Japanese menus, make sure Japanese appears somewhere in your list of languages. Just having it there unlocks Japanese features in certain software, like Japanese encoding in Apple's Mail application.
    When trying, the problem was not improved.
    >If the Japanese menus make things hard for you in certain applications, you can set the language of specific applications individually using the following method: First, select the application's icon in the finder and choose "Get Info"from the File menu.
    >
    >Expand the Languages section of the Get Info window, and you'll see the languages available for the application. If you check Japanese and uncheck English, you will get Japanese menus; if you check English and uncheck Japanese, you'll get English menus. If both are checked, the language is determined by the order of languages in the International Preferences Pane.
    In "Get Info" of the application based on Adobe AIR, "Languages section" is not found.

  • First Name is not displayed on Family Details IView in ESS

    Dear All,
    We are facing problem in Family Details Iview in ESS India. Here what happens is that on family Details Iview Last name and Birth Name is displayed. First Name is not displayed on the Iview.
    I Checked in the Structure HCMT_BSP_PA_IN_R0021. The fields are present in the structure.
    So pls can anybody help me out in this issue.
    Regards,
    Dhruv Shah

    Firstly check no UI elements are hidden via Personalization (Ctrl and Right Mouse button) on user level or in the PCD preview at administrator level
    Secondly check you are operating a recommend SP landscape
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
    --->HOW TO GET RID OF SP STACK MISMATCH ISSUES
    Next check that none of the fields are marked as unused in V_T588M, V_T588MFPROPS,  V_T588MFPROPC
    Hope this helps
    Stuart

  • Groupwise 7 Rule Name does not display Windows 2008 R2

    Under tools and rules on a windows 2008 R2 server the rule name does not display. Any ideas on how to resolve this would be greatly appreciated.

    kdavisb wrote:
    > 2008 R2 server
    I'm pretty sure that the GW7 client is not supported on Windows 2008 R2.
    Danita
    Novell Knowledge Partner
    Upgrading to GroupWise 2012? http://www.caledonia.net/blog/?p=514
    http://www.caledonia.net/gw12upg.html

  • JDBC adapter type  not visible in Communication Channel

    Hi All,
    I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
    Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type  not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

    Hi Kuldeep,
    Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
    Check below links also
    https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    Sender JDBC adapter : data read from db but not in PI
    Regards
    K.N

  • Server name is not displaying in Dropdown After client installation

    Server name is not displaying in Dropdown After client installation . what might be a issue

    Hi
    Depending upon the installation issue may be differ, so which SAP version and database version you have installed ?
    you can check
    1. Windows installer
    2  Sql Native client
    is installed or not.
    Thanks
    Kamlesh

  • The Sequence in Premiere not display the video channels

    I have this problema: The Sequence panel NOT display the video channels, only the audio cannel.  This occur in an old Project. When I start a new Project there is no problem, the sequence show all video and audio channels. How can I fix it ?  Muchas gracias por su cooperación!!

    Maybe try importing the old project into a new one, instead of just opening the old project.

  • Adapter type is not coming in Communication channel

    Hi all,
             I am facing a problem while creating a communication channel as i am not able to see any adapter type and its showing as non editable field  .
    i have cretaed my own software component in SLD  am i missing something in SLD configuration ??  because of that  i am not able to see any adapter over there .
    regards,
    praveen

    Praveen,
    You need to import SAP BASIS Software Component Version into Integration Repository.
    You need to download it from service market place.
    https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
    In Search Term Enter "SAP BASIS <version>".
    Now click on XI CONTENT SAP_BASIS 7.00 -
    > Database independent -
    > SAPBASIS13_0-20000888.ZIP Just save this file on your machine and unzip it.
    Now put this in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
    In IR, TOOLS ---> Import design objects and import it.
    Regards,
    Sarvesh
    ***Reward points for helpfull ans, in your last thresd you did not assingned points to any buddy.

Maybe you are looking for