Adapter Engine Not Coming up IN X I3.0

HI,
We have a issue the adapter engine is not working on
port <host>:8200 port.
There is no subdirectoy like tech_adapter as given in documentation.
HOw to install adapter engine ?
as we had run_adapter.bat in XI2.0 what is there in XI3.0 ?
Any clue ?
Regards,
Tuhin

Hi Tuhin,
There are many types of adapters available in XI3.0. Some of them are based on J2SE (standalone such as file adapter etc.), some are running on J2EE server (such as RNIF, PCK etc.) and some are on ABAP server (IDOC), and some are on both J2EE and ABAP (RFC).
I am not sure which type of adapter you are talking about. If it is on J2EE, you can log into Visual Admin tool, and under server0->services->deploy you should make sure all the relevant applications are running.
Hope this helps.
Hart

Similar Messages

PI 7.11 - Configuration: Adapter Engines Not found

Hi,
We have a PI 7.11 System that is connected to a central SLD. There are also two PI 7.0 systems connected to this SLD. If i open a communicationChannel i get following message:
Adapter Engines Not foundNo SLD elements of type SAP_XIAdapterFramework found
If i look in the SLD Technical Systems (Exchange Infrastructure), i see the three PI systems but only the Adapter Engines of the two PI 7.0 systems.
How can i check if the adapter engine is up and running and if it has correctly been registered by my SLD. Are there any documentation according this configuration?
Thanks in advance

It seems adapter engine is not registered properly. For more details, please refer to the following sap notes:
1. [Note 764176 - Error in XI due to inconsistent SLD contents|https://service.sap.com/sap/support/notes/764176]
2. [Note 1117249 - Incomplete Registration of PI components in SLD|https://service.sap.com/sap/support/notes/1117249]
3. [Note 1292803 - Configuration Wizard: PI SLD Self Registration|https://service.sap.com/sap/support/notes/1292803] .
Regards,
Sunil Chandra

Adapter Engines not found

Hello All,
I am doing a file to Idoc scenario. When I open the communication channel that I created, there is a warning message popping up as below:
Adapter Engines Not Found
Unable to find associated SLD element for specified class (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, IntegrationServer.pid.svdud01, string], target element class: SAP_BusinessSystem)
Any idea on this issue techies?
Thank you.
Ramesh.

Thank you all.
I have been checking all possibilities.
I tried to do the cache connectivity test in thr runtime workbench, but it throws the following error:
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Error while consolidating data
[Data Evaluation]: Couldn't parse Configuration Data cache update XML string from Directory.
I checked the technical and business systems for the PI system and they are maintained correctly.
Any more ideas ?
Many thanks.

XI Adapter Engine Not picking the data from FTP Server ?t

Hi All
We have upgraded oracle in our landscape
from 10.0.2.0.2 to 10.2.0.4.0
we have Redwood System , which runs the interfaces
Redwood initiates Our Satellite XI system to pick the data from the ftp server
but after the upgrade , it is not able to pick the data from the ftp server .
when checked in the Satellite XI Adapter engine getting following error
"XI Engine Error occurred while connecting to the ftp server java.net.socketException:Connection Reset"
but we are able to ftp from Satellite XI Adapter engine to ftp system manually but why Satellite XI Adapter engine is not the
picking the file (ie data) from the ftp server.
Immediate Response is highly appreciated
Regards
Edited by: sidharthmellam on Nov 23, 2009 11:54 AM

Hi Sidharth,
Please give me the FTP connection parameters mentioned in the channel.
Did you try stopping and starting the channel ?
If not please stop and start the channel.
Also catch the default trace and paste it.
Cheers...,
Raghu.

Adapter engine not found in Integration Directory

Hello All,
We are having a new server installation. The problem I am having is in Integratin Directory --> Communication Channel, no option for Adapter Engine is present in the drop down. I have checked the following options:
1) SAP BASIS Component with Adapter Mata data is present in Repository.
2) In SLD, Content Maintenance, class XI Integration Server. There are 3 associated objects (the last column). XI Sub-System viewed application system is also present.
3) The Technical and Business Systems are already created for XI Integration Server in SLD.
I have also suggested the blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory , to the Basis team, however the problem still persits.
Kindly suggest how we can resolve the issue and start executing our scenarios.
Regards
Pravesh
Edited by: Pravesh Sharma on Mar 9, 2009 10:11 AM
Edited by: Pravesh Sharma on Mar 9, 2009 10:12 AM

Hello,
I think the BASIS Team has gone through or implemented this OSS note as it is mention in the blog above. However the problem still persists.
Regards
Pravesh

Adapter Engine not working

Hi,
I've found the follonwin log error Monitoring the Adapter engine cache:
11-may-2006 17:13:25 - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.imhotep, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
Any ideas? We have tried almost everything...
Thanks and Regards.

Hi Isabelle,
Check the link and reply of Manish Balla and also Antonio Dos, the same issue was reolved and answered.
No Adpater Engine available in Communication Channel creation
Regards,
sridhar
Message was edited by: sridhar reddy kondam

Adapter Engine not started

Hi All,
We are having a problem in starting the adapter engine after the XI3.0 istallation. The start/stop option for Adapter Framework and Adapters is not enabled in the J2EE visual tool. Can someone help me on this.
And can i re-deploy the adapter framework on the central integration server without re-installing the whole stuff again.
Best Regards
Sreekanth

Are you sure supplied credentials are valid for PIISUSER?
1) HTTP response does not contain a valid XML root tag or Error 'HTTP status code 400 Bad Request' while executing HTTP request (calling method 'get_status')
The error 'HTTP response does not contain a valid XML root tag' occurs when path prefix of the destination is '/dir/hmi_cache_refresh_service/ext'.
The error 'Error 'HTTP status code 400 Bad Request' while executing HTTP request (calling method 'get_status')' when path prefix is '/dir/CacheRefresh'.
Solution: Go to transaction sm59 and open destination of type 'H' INTEGRATION_DIRECTORY_HMI. Select "Connection Test". The connection test should return HTTP response 200.
Now go to "Logon & Security" tab and ensure that username and password are stored in the system. Fixing credentials should fix the problem.
Note: Credentials cannot be tested via "Connection Test" tool. If used credentials are wrong, the server simply returns login html page (using HTTP response code 200). As the login html page is not a valid cache refresh xml document, an error is shown in sxi_cache.

Why my Local Adapter Engine not showed in SLD and Integration Directory?

Hi guru,
I have installed one Local Adatper Engine on Host B, then an XI is installed on Host A, but After I installed the local adapter engine and follow the standard configration step mentioned in this document:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/307deae3-604e-2a10-feae-f016fb9cadd4.
After the configuration is done, I restart the local adatper engine, but this local adapter engine is not showed in integration directory.
what is the problem?

The post-installation configuration steps are not complex, I exactly followed.
what other reason could it be? have any guru configured local adapter engine before?

Adapter Engine not visible in RWB

Hi Guys,
         I coudnt find the Adapter engine in Component Monitoring and Message monitoring in RWB.
while displaying the components of Integration Engine getting the below error. I am using PI 7.1
Kindly let me know where to check if the components are not visible in RWB.
java.lang.NullPointerException:
     at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:635)
     at com.sap.aii.mdt.web.MonitorDynPage.process_go_button(MonitorDynPage.java:496)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:102)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
With Regards
Pradeep N

Check page 129 of this document:
[SAP XI TroubleShooting Guide|https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E]

Adapter Engine Not found in ID

Hi folks,
While creating a communication channel for File adapter the field for Adapter Engine is blank
I followed this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Business system was not there. so I tried creating a WEB AS ABAP acc. to this blog.
I got the following error :
CIM_ERR_FAILED 
Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
however it's creating a Business System. but I am not able to find the adapter engine in ID.
Reagards,
Sachin

Thank you folks for your prompt replies.
My problem is solved... The reason was the Business System was not created properly.
Thank you
Sachin

Adapter Engine Not Showing up in SXI_CACHE

Hi,
The adapter Engine is not showing up in the Transaction SXI_CACHE and also when i create a RFC comm channel it is not showing up in the Adapter Engine Dropdown.Can anyone let me know whether these both are linked and is there any way to rectify the same ?
Regards,
Kittu.

Hi Kittu,
try restarting the J2EE Engine. This should register the AE with the SLD.
If that does not work then check there are not SLD inconsistencies,
i.e.,
#764176 Error in XI due to inconsistent SLD contents
If that does not help try calling the FM - SAI_AE_DETAILS_GET
e.g.
TCODE
SE37
SAI_AE_DETAILS_GET
 Import parameters Value
AE_NAME AF.<SID>.<IS Hostname>
BYPASSING_CACHE X
The result should be something like
Export parameters Value
AE_MSG_URL http://<IS Hostname>:<J2EE port>/MessagingSystem/receive/AFW/XI
IS_SERVICE_USER_NAME XIISUSER
IS_SERVICE_USER_PASSWORD
WAS_CACHED
and the AE should be listed in
TCODE
 SXI_CACHE
 -> GoTo AE Cache

Adapter Engine not visible in SLD, RWB and Directory

Hi all,
I have problem with the registration of the adapter engine in my sld. When I search for it in Technical Systems doesn´t appears.
I have implemented SAP notes 764176 and 804124 and it doesn´t work.
My system is SAP PI 7.0 and the SLD is configured on a differente machine. The SAP PI machine can reach SLD machine (is not network problem).
Any suggestions?
Thank for your postings.

Hi -
Do you have your SLD Data Supplier service (within Visual Admin tool) for PI Java server pointed to the host of the SLD machine? If so, you should at least see a Technical System (type Web AS Java) for your PI system in your SLD.
Regards,
Jin

Number of retries in Adapter Engine not working ok in SP18

Hi
We recently upgraded to SP18 from SP13 on our XI 3.0 Dev env. After upgrade , the number of error retries on the adapter engine is set to the default values as
xiadapter.inbound.numberRetries.default = 3
xiadapter.inbound.retryInterval.default = 300000 [ms]
xiadapter.outbound.numberRetries.default = 3
xiadapter.outbound.retryInterval.default = 300000 [ms]
In RWB, we find that the number of retries in case of a database update error - goes up to two hours - instead of ending at 15 minutes -
The number of retries - gets incremented to 2 in the sixth minute, but remains at 2 for nearly 2 hours - and then turns to 3 and ends .
Anybody face this problem in XI 3.0 SP18 - any known OSS notes applied to fix this issue - Correct answers to be rewarded rightaway.

Have you seen alreay these notes:
<a href="https://service.sap.com/sap/support/notes/791379">Note 791379 - XI Adapter service properties documentation</a>
<a href="https://service.sap.com/sap/support/notes/791655">Note 791655 - Documentation of the XI Messaging System Service Properties</a>
Regards,
Sandro

ADAPTER engine not found in runtime work bench

Hi Experts,
I am not able to see the adapter engine in the component monitoring in RWB .
What may be the probelm ?
Thanks in advance and best regards,
Anil

Hi Anil,
The adapter needs to register itself in SLD.
For this there is template task which should have done this automatically. If not the Basis team could trigger the self-registration of adapter engine in visual admin.
For more info refer to the link
[Adapter Engine Self Registration|http://help.sap.com/saphelp_nw70/helpdata/en/43/8dde24cbdc6353e10000000a11466f/frameset.htm]

Adapter Engine not found in SLD

hi all -
BASIS applied this note SAP note- 764176 and when we stopped and restarted adapter engine service->
sap.com/com.sap.aii.af.cpa.app.
We did not see the Adapter Engine back in SLD.
Any reason why its not showing?
Thanks,
Tirumal

Hi,
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
If you still face issue try this .
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss

Adapter Engine Not Coming up IN X I3.0

Similar Messages

Maybe you are looking for