Adapter Engine NOT in the drop-down list - RFC adapter, Communication Chan

Hello XI Experts,
I recently installed IDES (ERP2005) along with XI (NW2004s). I carried out the post installation steps for XI. I set up XI (technical systems, business systems, etc).
I have started to create an RFC to File XI interface. I have carried out the necessary steps in the Integration Repository and am now setting up the scenario, etc in the Integration Directory.
I have reached the stage of creating the communication channel of type RFC for the sender system. However, when I do this, the adapter engine is empty i.e. there are no possible entries in the drop-down list. I was expecting to see "Integration Server" as a possible entry.
Could someone advise me on what I may have missed which leads to this problem?
Thanks and regards,
Nicholas.

Hi,
You have to get the SWCV from SAP market place.
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Content PI/XI
XI CONTENT SAP_BASIS 7.00 / 6.40
You have to upload the file in the Integration repository
Best regards
Omar

Similar Messages

My area is not on the drop-down list?

just applied for skype number but my area is not on the drop-down list can't get any further until I choose something from the list, what do I do, just pick the nearest area?
Post transferred to create its own new thread (topic);
subject/title edited accordingly.

Hi, ladyfromllan, and welcome to the Community,
Yes, you are correct: you would need to choose a Skype Number nearest where you ultimately wished to have your Skype Number located. Ultimately, the number would be best situated so that those who call it the most would not incur toll charges; however, that said, Skype Numbers are not available absolutely everywhere for several legitimate reasons.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. hat do I d

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. What do I do next?

Contact support by web chat.
Mylenium

My country ( EGYPT ) is not on the drop down list for the FaceTime app ?

While trying to use the FaceTime app.on my iPad I was asked to identify my region I did not find my country EGYPT on the drop down list of all countries .
What shall I do ?
pls. Help...
Thank you .

We are users. Contact Apple.

Output devices list not appearing completely in the drop down list

Hi,
I have a query where I am not able to see all the 583 output devices in the drop down list of output device for a transaction code whereas I can see all the output devices in SPAD. Can anyone tell me the reason for this?
Thanks.
Brijesh

Dear Brijesh,
You can show all the value, click on the restriction button, then change the max numbers of hits to 10000,then you can list all the data in drop down, as per i know in standard it will only give you 500.
Regards

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR

Just started using Firefox; problem re log into New Yahoo; i have typed in my ID including several mistakes and i want to get rid of these from the drop down list that appears when i start to enter my ID. 'Clear History' does not seem to deal with this.

OR even better stop the drop down list appearing altogether;

Take a look here:
https://support.mozilla.com/en-US/questions/871553
thank you

Unable to select IS from the drop down list in message mapping

Hi,
i know that we can monitor 'Integration server' in message monitoring rather than choosing integration engine or adapter engine.
But in our existing land scapes i am unable to select IS from the drop down list in message mapping.
using PI 7.1 SP 08.
please let me know that we need to set up additional configurations settings to select IS form drop down list.
Regards,
Pradeep A.

Hi Pradeep,
please let me know that we need to set up additional configurations settings to select IS form drop down list.
There are no extra settings that needs to be done for this. I don't know whether you have noticed this, but IS option will only come up when you want to monitor the messages from the "Database" and not from the "Database overview" or "Archive".
Regards,
Neetesh

Cannot remove autocomplete entry from address bar; have already cleared history, and entry is not in the drop-down menu of the address bar either.

I am having problems removing an autocomplete entry from my address bar; I have tried clearing my history, so it's no longer in that, and I do not have it bookmarked either, so it's not getting the URL from that location either. The autocomplete entry isn't even showing up in the drop down menu, so I can't even scroll through that to delete it.
Basically, I want to be able to type "st" and go to "store.steampowered.com"; however, despite numerous times of typing in "st" and then going down into the drop-down menu to choose "store.steampowered.com", the bar continues to autocomplete "steamtrades.com", which is exceptionally annoying because I do not have that website bookmarked, or in my history, yet it continues to autocomplete to that address, which I do not want it to autocomplete to, and cannot figure out how to remove because I've already cleared my history multiple times, do not have it bookmarked, and it is not showing up in the drop down of the address bar for me to go down and force delete it.

Did you try to remove some letters from steamtrades.com to see if that bring this entry up in the drop-down list?
If it is not in the history then it might be present with a typed=1 flag indicating that you have typed or pasted it in the location bar.
You can use the SQLite Manager extension in Firefox to inspect the places.sqlite file to see if this entry comes up in the moz_places table.
*SQLite Manager: https://addons.mozilla.org/firefox/addon/sqlite-manager/
<pre><nowiki>SELECT datetime(visit_date/1000000,'unixepoch') AS visit_date, url, title, visit_count, frecency
FROM moz_places, moz_historyvisits
WHERE moz_places.id = moz_historyvisits.place_id AND url LIKE '%steamtrades.com%'</nowiki></pre>

How to populate the values in the drop down list form the xml file ?

I want to populate the drop down list values from a seperate xml file called ReferenceData. I created this file, which consists of a mapping entry in the form of ( key,value ) pair. Am mapping this xml file in to form by using rule named as getAppReferenceData.
But the values are not getting populated in the form. And I have a doubt of, where should we keep that xml file? (under which path / folder ).

what would help is if you showed what you do in the rule, either the code or a express trace of the rule.
The other thing you need to know is where you want to get the file from. Yes java can read a file from anywhere on the system but there is a security layer in there which might prevent the file being opened. Have you allowed acces to the file via the security policy settings via java.io.FilePermission?
WilfredS

In Firefox 4, how do I get back the context menu for the drop down list of the Location Bar so I can Open Link in New Tab, which I did often in FF 3?

Firefox 3 has a context menu for the drop down list of
the Location Bar. One option on this menu I used often
is "Open Link in New Tab" -- quite convenient.
This context menu has disappeared in Firefox 4.
Can I get it back?

See also:
*Tools > Options > Privacy > History: "Remember search and form history"
*https://support.mozilla.org/kb/Form+autocomplete
The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

How come the apple I'd ask to key 3 letters but the drop down list only two letters..so it coz me unable purchase ..., How come the apple I'd ask to key 3 letters but the drop down list only two letters..so it coz me unable purchase ...

My account edit billing address ask to key 3 letters for country but the drop down list only 2 letters and we unable to key only select.

I think this is an excellent indicator that not only is Palm reviewing the feedback from the support forums here, but actively reviewing feedback/comments/wishes on other sites as well.
As the original poster copied this (quite solid, IMO) wishlist from Pre Central, the palm support staff acknowledged first seeing it there.

Unable to clear the drop down list of junk login ID's - I have a Mac OSX

When I go to sign into my yahoo ID, and I begin to type my e-mail account, a drop down list of junk log in ID's pop up. These are ID which I have entered my mistake in the pass. One of which is my password. I am unable to clear the drop down list of this junk log in ID's. I ask Yahoo how to do it and I was told that this problem is specific of my web browser. I need your help to clear that junk log in ID's. I have a Mac OSX, Version 10/4. Would you be able to explain simple what to do. This problem is annoying as every time I sign in that drop down list appear.
I would appreciate your assistance.
Sincerely,
Socorro Bery

good afternoon Limnos i think i didnt give the right info I didnt download well in a way i did i bought a copy of microsoft excel for mac 2004 i loaded on to my mac then i went and down loaded some software that said i needed to have excel you see my mac is osx 10.4,11 power pc G4 and that is were i had the problem now the excell loaded allright but the the other programs did not the pop ups say it is not scriptable or can not read dictionary if you can help m,e iam not great with computers but i along

Facing the problem ValueChangeListener of the Drop Down List

Hi,
I am using the JDeveloper 10.1.3.5.0 and the JHeadStart 10.1.3.3.88. In my requirement, I am having three View Objects(V1,V2,V3). I need to create a page based on one VO(V1) displayed as table. In the screen, there are 6 columns. Three of them(C1,C2,C3) are having the static values( coming from the VO(V1) from which it has been built), and the others are, one column(C4) is displayed as the drop down list(for some of the rows, drop down list values are coming from the VO(V2), and for the others drop down list values are coming from the other VO(V3). The other column(C5) is a input text field, that is enabled or disabled based on the selected values from the drop down list column(C4). The column(C6) is a check box. Now, coming to the actual requirement, the rows are related to the papers. For each paper, there are 5 methods of studies. One of the method of study is SelfLearning (5th method of study), for this the drop down values are coming from the VO(V3), and for the other methods of studies(1 to 4), the drop down values are coming from the VO(V2). Now, for a user, based on the number of papers, the number of rows are displayed.(1 paper- 5 rows, 2 papers-10 rows like wise). Initially, drop down list is displaying the null values. When I change the value in the drop down list, I need the ValueChangeListener has to be called and it has to call the method in the bean. From the bean, the column(C5) has to be enabled or disabled. This is working fine for the inital 5 rows and 7,8,9,10 rows and 12,13,14,15 rows. But, the ValueChangeListener is not working for the rows 6 and 11. I used the debug concept,and I confirmed that the valueChangeListener is not getting called for the rows 6,11,16 rows.
C 1
C 2
C 3
C 4
C 5
C 6
P1
ABC
Study Method1
Drop Down list1
input text box
check box
P1
ABC
Study Method2
Drop Down list2
input text box
check box
P1
ABC
Study Method3
Drop Down list3
input text box
check box
P1
ABC
Study Method4
Drop Down list4
input text box
check box
P1
ABC
Study Method5
Drop Down list5
input text box
check box
P2
DEF
Study Method1
Drop Down list1
input text box
check box
P2
DEF
Study Method2
Drop Down list2
input text box
check box
P2
DEF
Study Method3
Drop Down list3
input text box
check box
P2
DEF
Study Method4
Drop Down list4
input text box
check box
P2
DEF
Study Method5
Drop Down list5
input text box
check box

The problem gets solved. Actually, the problem is at the VO Query. The small modification in the query at the attribute p_id( C1 ) has solved the issue.

I cannot activate acrobat XI pro although I entered the serial # It asks me to choose a product which is NOT in the drop down window

I cannot activate acrobat XI pro although I entered the serial # It asks me to choose a product which is NOT in the drop down window

Without knowing which program you were hoping to see in the list I can only offer the following as a result of an assumption of the situation...
Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

Adapter Engine NOT in the drop-down list - RFC adapter, Communication Chan

Similar Messages

Maybe you are looking for