Adapter Engine URL missing in RWB
Hi All,
In my newly configured PI 7.0 system, the Adapter Engine URL is missing at the fol. location:
RWB -> Component Monitoring -> Adapter Engine -> Test Message.
But when I open SXI_CACHE -> AE Cache, I am able to see the url http://pidev:50000/MessagingSystem/receive/AFW/XI
I think that this means that my ABAP stack is configured properly, but JAVA stack has some problem for Adaptr engine.
Please confirm if I am right and how to resolve this.
regards,
Piyush
Hi,
Are you using the FQHN?
Check also note #764176 if you have components missing on SLD.
Last, you may want to configure your system in order to check each of the steps.
Use this link -> Wizard-Based Basic Configuration:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
Regards,
Caio Cagnani
Similar Messages
-
JAVA Adapter Engine is missing in XI 7.0
Hi All,
I am working on new xi server 7.0 .While the configure time adapter engine was missed.After that we installed service pack 08(for Both ABAP stack & JAVA STACK).After installing also Adapter Engine is not vissibile.
We installed these service pack 08 files for the java stack.
sap.com SAP-JEECOR 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180132
sap.com CORE-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601105000) SAP AG SAP AG 20060909180127
sap.com SAP_JTECHF 7.00 SP8 (1000.7.00.8.0.20060601105100) SAP AG SAP AG 20060909180133
sap.com BASETABLES 7.00 SP8 (1000.7.00.8.0.20060518071900) SAP AG SAP AG 20060909180134
sap.com JLOGVIEW 7.00 SP8 (1000.7.00.8.0.20060601105200) SAP AG SAP AG 20060909180130
sap.com SAP-JEE 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180140
sap.com LM-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601141123) SAP AG MAIN_APL70VAL_C 20060909180136
sap.com JSPM 7.00 SP8 (1000.7.00.8.0.20060618023100) SAP AG SAP AG 20060909180133
sap.com ADSSAP 7.00 SP8 (1000.7.00.8.0.20060524131300) SAP AG SAP AG 20060909180128
sap.com CAF-UM 7.00 SP8 (1000.7.00.8.0.20060519071848) SAP AG MAIN_APL70VAL_C 20060909180125
sap.com KM-KW_JIKS 7.00 SP8 (1000.7.00.8.0.20060601105400) SAP AG SAP AG 20060909180131
sap.com UMEADMIN 7.00 SP8 (1000.7.00.8.0.20060531093731) SAP AG MAIN_APL70VAL_C 20060909180133
sap.com BI_MMR 7.00 SP8 (1000.7.00.8.0.20060529231100) SAP AG SAP AG 20060909180135
sap.com SAP_JTECHS 7.00 SP8 (1000.7.00.8.0.20060608124200) SAP AG SAP AG 20060909180139
sap.com BI_UDI 7.00 SP8 (1000.7.00.8.0.20060529235200) SAP AG SAP AG 20060909180129
sap.com CAF 7.00 SP8 (1000.7.00.8.0.20060531093727) SAP AG MAIN_APL70VAL_C 20060909180121
sap.com SAP_XITOOL 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180134
sap.com SAP_XIAF 7.00 SP8 (1000.7.00.8.1.20060803090400) SAP AG SAP AG 20060909180125
sap.com SAP-XIAFC 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180128
Please help me..
Thanks,
GopiHi Gopi,
Last time this happened to us, we traced the problem to convoluted CIM data in SLD.
Look at oss note 764176, to see if you have the same symptons.
We deleted all XI related CIM data from SLD, restart our XI systems, and then followed OSS note 764176 to fix the CIM data.
Also please make note that there is a hot fix now for the following
sap.com SAP-XIAFC 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060919075421
sap.com SAP_XIAF 7.00 SP8 (1000.7.00.8.1.20060803090400) SAP AG SAP AG 20060919075417
sap.com SAP_JTECHF 7.00 SP8 (1000.7.00.8.1.20060706171200) SAP AG SAP AG 20060919075425
sap.com SAP_JTECHS 7.00 SP8 (1000.7.00.8.1.20060706171300) SAP AG SAP AG 20060919075430
sap.com SAP_XITOOL 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060919075426
Hope this helps/Farshad -
Versin iformation for adapter engine is missing in the SLD
Hi,
Just imported my Integration Directory changes into receiving PI System and have come to do the manual activation of the change lists that was asked for. When I do I get the activation cancelling with a message that a communication channel cannot be validated as the version info for the adapter engine is missing in the SLD.
Can anyone tell me what I have to do to get past this problem ?
Many thanks,
RossHello Ross,
It looks compatability problem with the Adapter engine and CC.
Check the system information and apply required patches if require. May be you can go to SAP raising a message.
http://<pihostname>:<port> systeminfo
Regards
Pothana -
Want to Change Adapter Engine URL!
Hi Experts,
Currenly my Adapter Engine URL: http://<server>:8001/MessagingSystem/receive/AFW/XI
I wan to change the Adapter Engine URL to: http://<server>:50100/MessagingSystem/receive/AFW/XI
How can it be changed?
Thanks,
karthikHi Nisar,
Thanks for response.
I executed a file to file scenario. There I got HTTP error with 404. When I tried to solve it, I found this difference in SXI_CACHE.
In SXI_CACHE-> Goto-> Adapter Engine, an entire is present but with the URL having port 8001.
I belive it has to be changed to 50100.
Kindly help! -
Adapter engine URL different between CACHE and RWB adapter engine URL?
Hi there,
If I go to SXI_CACHE and go to the adapter engine runtime cache I get a URL of:
https://<server>/MessagingSystem/receive/AFW/XI
NOTE: The above URL is HTTPS.....and there is no port in the above....
However, if I go to the runtime workbench and click on the adapter engine and click on "test message", I get the following URL:
http://<server>:<port>/MessagingSystem/receive/AFW/XI
NOTE: The above url is HTTP and there is a port.
How can I get these URL's back in sync?
I want them both to be HTTP.
Any ideas?
ThanksHello
1) Check the value of the Exchange Profile parameter 'com.sap.aii.connect.secure_connections'. If you don't wish to use HTTPS this should not have any value set.
2) Delete the Adapter Engine cache in trx sxi_cache -> Goto -> Adapter Engine Cache -> Delete Cache Contents (trash can icon).
The AE cache will be populated the next time a message is sent through the system. Check the value after this is done.
Regards
Mark -
Adapter Engine not visible in RWB
Hi Guys,
I coudnt find the Adapter engine in Component Monitoring and Message monitoring in RWB.
while displaying the components of Integration Engine getting the below error. I am using PI 7.1
Kindly let me know where to check if the components are not visible in RWB.
java.lang.NullPointerException:
at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:635)
at com.sap.aii.mdt.web.MonitorDynPage.process_go_button(MonitorDynPage.java:496)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:102)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
With Regards
Pradeep NCheck page 129 of this document:
[SAP XI TroubleShooting Guide|https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E] -
Adapter Engine Error Message on RWB
Hello
We are getting an Red color error message on Adapter engine on RWB
monitoring ---> Component Monitoring.
Here is the error message:
SLD access SLD host:port = sap03:50000
Error getting JPR configuration from SLD. Exception: No entity of class
SAP_BusinessSystem for XID.SystemHome.sap03 found
No access to get JPR configuration
Please advise for solving the error message on adapter engine.
Thanks & regards
AK
SAP Version : NW04 (XI 3.0) SP20Hi Senthil,
As suggested by others there is no problem with your communication channels ,,, the problem you face is because Your DBA has initiated the SHUTDOWN IMMEDIATE command. This will shutdown Oracle and terminate all active operations.
Please tell him to start the services and Wait until Oracle has been restarted by your DBA.
Regards
joel -
Adapter Engine link disapperead from RWB - component monitoring screen
Hi.
I restarted PI.
After that, the "adpter engine" line (link) disapperead from the page RWB - component monitoring.
PI is running, it is exchanging data with Ecc and Thirdy Party systems.
How to solve the problem ?
To arrive to "defective" screen:
http://host:5xx00/rwb/index.jsp --> component monitoring --> component with status all --> display
Under domain xx, under integration server, there is no adapter engine line/link
Thanks !HI,
Check in SLD-> content maintenence-> XI adapter framework is registered or not...
If not thn register by performing the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
have a look on this...
PI 7.1: Problem with SLD configuration: Cannot find central Adapter Engine
Regds,
Pinangshuk. -
Adapter Engine Field missing --
Hi All,
I'm trying to create new Communication Channel in our QA system.
I'm using 'Sender File Adapter' But somehow When I choose below option, the last value (Adapter Engine) is blank.
- Adapter type : Sender FILE http://sap.com/xi/XI/System SAP BASIS 7.00
- Transport Protocal : File System (NFS).
- Message Protocal : File
- Adapter Engine : ??????? (Blank)..
We are under PI 7.0 and I did same in Dev but it's not in QA. I think the value of 'Adapter Engine ' should be 'Integration Server'
automatically. Any Idea?
Thanks in advance.Hi,
Yes, if your adapter reside in the central adapter engine then it should be in the IS.
Adapters that host in different adapter engine, then decental adapter engine need to be selected.
Check you SLD configuration, whether there is an entry for your Adapter Engine or not.
Have a Look on this SAP Note : 764176, do hope it will resolve you problem.
Look for these discussion: Unable to determine name of central adapter engine
Missing Adapter Engine in the XI Domain (in the RTWB view)
Thanks
Farooq.
Edited by: Farooq Farooqui on Jul 31, 2008 7:19 AM
Edited by: Farooq Farooqui on Jul 31, 2008 7:29 AM -
Multiple adapter engine URL's found
Hello,
In the integration directory, when we tried to add a communication channel or change a currently existing communication channel we get an error " Attempt to determine which Adapter Engines are affected by data changes failed". We did a cache refresh and in AE runtime cache we find the AE name changed to "CA" with a new adapter engine name. The default was "AE" with the adpater name blank. Also in the cache notification of ID there is an "Unknown error" in red and in the cache instance we find 2 adapter engine instances.
Where can we find the actual adapter engine set up for the integration server ?? and How can we revert back to the original settings??
Any help is appreciated.
-krishnanHi Murugadass,
This link provides all details pertaining to adapter engines, expand them further to get information
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/frameset.htm
Also have a look at this thread:
No adapter engine when Adapter type as File
Hope these help and do not forget to assign points for helpful answers!
Cheers,
Chandra -
Adapter Engine Component Missing
Hi All,
In the Integration Directory, The Adapter Engine field dropbox is not showing the central Adapter Engine component.Because of this the adapters (other than HTTP and IDoc adapters)can't be used during configuration.
Can anyone help?
Thanks and Regards,
SoumyaHi Soumya,
Go thru following document from service.sap.com , it may help you about Adapter Engine Components are configured or not .
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps
Regards,
Moorthy -
"Adapter Engine is missing in Communication Channel".
Hi Experts,
I am Unable to Find out the Adapter Engine As Integration Server in the File Sender Communication Channel.
please let me know
Regards
Khannahi,
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
note : points pls if it helps you -
Missing Adapter Engine in the XI Domain (in the RTWB view)
Team,
I am running at in a bizarre situation at a client site. We have one SLD that is shared by 2 XI installations (a POC and a SandBox).
In the POC (in run time workbench view), I can see all the XI component (integration engine, BPM engine, Adapter engine, etc) under it's domain.
In the SandBox, the Adapter Engine is missing ...
We have applied the #764176 note. It has terminated successfully (no error), but we are still in the same situation - the Adapter Engine is missing ...
We have imported (the SWCV basis 7.0 and the ABAP 7.0).
Are we missing something?!?!
Thank !
A+Hi Naveen,
We have ran (and setup) the RZ70 trx successfully.
In the SLD the Business System for our sandbox is present (as the same for our POC business system). All authorizations are in.
The basis guy, at installation time, has given an existing SLD. He does not remember at the end of the installation if the adapter was missing or not (I was not there a the time of the installation, but I presume that it was OK).
Later in the week, they (customer) decided to switch the XI sandbox to another SLD. The adapter is missing in action since then.
Still does not work ;-(
Is there a way i can see (or attach) a couple of screen shot of my error ?
Thank in advance
A+ -
Missing Audit Log of Adapter Engine in Message Monitoring
Hi!
I've a problem with a fresh installed PI:
The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
What can cause this behaviour?
Best regards,
DanielHi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel -
TWO Adapter Engine (CA + IS) - How to delete one?
Hi,
In PI prod, I have an issue when PI has to send back an acknowledgment to ECC (when ECC send an idoc) (*). By looking queue log and reading SXMB_MONI trace, I identified that my problem is certainly with the link "IE -> Adapter Engine" and here's what we have:
In PI prod:
- in SXMB_ADM, category=RUNTIME + Parameter=IS_URL, I have: http://<host>/sap/xi/engine?type=entry " no <port> !
- in SXI_cache, I have TWO entries for Adapter cache:
1. AE name = af.pip.pip-mssql
AE type = CA
AE URL = http://<host>:<port>/MessagingSystem/receive/AFW/XI
2. AE name = is.50.pip-sap
AE type = IS
AE URL = http://<host>/sap/xi/engine?type=entry " no <port> !
And when PI has to send back the ack, it uses the 2 line of SXI_CACHE (e.g "IS"), and it's here that we have error (e.g HTTP_COMMUNICATION_FAILURE), whereas in PI quality, I have:
- in SXMB_ADM, category=RUNTIME + Parameter=IS_URL, I have: http://<host>:<j2eeport>/sap/xi/engine?type=entry
- in SXI_cache, I have one entry:
AE name = af.piq.piq
AE type = CA
AE URL = http://<host>:<j2eeport>/MessagingSystem/receive/AFW/XI
To solve issue, my first idea is to provide <port> in "IS" url, and check the result... but why to keep two AE?
The 2nd idea is to delete the 2nd entry (e.g "IS") in SXI_CACHE and/or update the appropriate "aii" properties.
I have three questions:
1. what's the best approach?
2. where the 2nd entry of SXI_CACHE (e.g "IS") is maintained? which aii properties?
3. do I have to stop/start PI server? if update IS_URL in SXMB_MONI, and/or if update the "aii" properties.
As error appears in prod (only), please answer only if you are sure , because myself I have a doubt....
And if you could refers to a help sap, snd, pdf links, I will appreciate.
Thanks.
Mickael
PI 7.1 EhP1
(*) I know that a quick solution should be to use prog IDX_NOALE in order to not send Ack... but I don't want that.option 2 should be a clean approach.
ref: Re: Adapter engine URL different between CACHE and RWB adapter engine URL?
Maybe you are looking for
-
Hello all, We are running Business Objects 4.0 SP2 and have some users running queries to our ERP system. They say they are running them in the background, but they are still timing out after 10 minutes with an ST22 stating they are exceeding the 60
-
Module Pool+TOP+report prog,, Shuld I move to TEST individually?
Hi Experts, I enhanced one Module Pool Prog., which contains 3 parts i.e. 1 - Main Module Prog. 2- Top include 3- One error report prog. i.e. executable prog. So, Now, I need to move this main Module prog. to TEST box, So, 1) I guess I need to move t
-
List of sales order without order bom fix
dear sir we are using variant configuration with result oriented order bom fix in cu51/cu52 we want the list of sales orders for which order bom is not created using cu51/cu52 fixing can any body tell me where this information is available? thanking
-
What is it
-
CustomTaskPane Title font size changed when upgrading from 2010 to 2013
I just upgraded my Word project from Office 2010 to Office 2013. The title of my task pane has changed font size considerably. Is there anyway to control the font size of the custom task pane title? taskPane = Globals.ThisAddIn.CustomTaskPanes.Add(ne