Adapter frame work

what is adapter frame work?
what is pck?
what is jca?
i need clean explanation dont send lot of links just send me one best link or in few sentences

Adapter Frame Work - Engine and APIs for using the various adapters at run time.
PCK - Partner connectivity kit. Used for communicating with partners where there is no fullblown integration engine available.
JCA - Java connectivity architecture. Used for connecting to the java engine capabilities and use them.
But the SDN help would give you more detailed and easy to understand material. Do spend some time for searching.. you will not be discouraged.
VJ

Similar Messages

JMS Adapter Frame Work Error - No Alert

Hi All,
   We have configured Alert Frame Work in Development and it is working fine .
Only issue with Adapter Frame work I am able to catch all the errors in File adapter like
wrong directory, FTP errors and No sender agreement but for JMS Communication channel
when the queue is down or wrong parameters to connect then CC is showing errors in RWB
   but I am not getting any alerts even when there is no filter.
I could not understand why , can u throw some light.
Thanks and Regards
KLK
Message was edited by:
        K.L.K

Hi KLK
I am having same issue. Did you solve this issue. If yes, Can you let me know what would have been wrong in settings.
Thanks
Chri

How to deploy AXIS adapter frame work in sap pi

Hi All ,
We are going to use Axis adapter framework in AAR PI landscape(X6* track). As we understood, this is SAP provided by default with PI but there are some more additional JARs need to be installed to enable this functionality.
Do we need downtime for this activity?
How to to deploy some standard JAR files in SAP PI
system to enable Axis adapter framework PI systems.

Hi Rainder
Could you refer the SAP Note 1039369 - FAQ XI Axis Adapter for your request. and also you can search SCN or Google about your requirement you can find some many threads
Regards
Sriram

Adpter frame work

can you provide me document explaining the functionaliteis of all the
components of adapter frame work(module processor,cache config,messaging system logging,security and administration and monitoring)

Hi Jaya,
Check these two docs on Adapter Framework which contain all the details as you mentioned:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6f83d790-0201-0010-629d-ab5bf10c94e4
Regards,
Subhasha Ranjan

Lightning HDMI Adapter not working with iOS 6.1.2

I have an iPhone 5 which was updated from 6.0.2 to 6.1.2 recently and the Lightning HDMI adapter stopped working altogether for video mirroring; was wondering if anyone has the same situation/any solution for this?
I also have an iPad retina generation which is at 6.1.2, and the Lightning HDMI adapter is not working for it as well.
I've tried replacing HDMI cables, rebooting the iPhone with the cable plugged in, and plugging out/in several times with the charger in/out. The adapter works, cause when I plug it in; I see the top bar flash for a bit... but no dice on the video mirroring to my TV.

I also have this problem and am very unhappy with the way Apple is handling it. Called today to enquire on when the fix will be available and was told it is a software issue that could be fixed if we paid $35.00 to talked through process on the phone. Highly disappointed with Apple, why should it cost me money for them to fix there own issue. Since they are aware of the issue the least they can do it posted the information for the fix online @ no charge.
If I wanted crap service I could have gotten a phone from anyone. Reconsidering purchasing a 5 on next upgrade.

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Mini dvi to dvi adapter not working with monitor

arright *** i got a mini dvi to dvi adapter which is connected to my vga monitor through a vga to dvi adapter. The computer recognizes the monitor in display preferences, but the monitor doesn't display anything it just sits in standby mode... any ideas why this isn't working? You'd think if the problem was going from vga-vga to dvi adapter-dvi to mini dvi adapter that it wouldn't even recognize the monitor but it does.
well that *****, back to best buy to get the other one. Reason i got the dvi one is because i plan on getting a different monitor with dvi soon. But noo dvi adapter wont work with vga adapters.
Message was edited by: Veiss

The mini-DVD to DVI adapter doesn't pass through the analog video signals needed for VGA, so won't work with a DVI to VGA adapter. All the control signals are there, so the display is recognized, but there will be no picture.
They could have used a DVI-D connector on the adapter, instead of DVD-I, so the DVI to VGA adapter wouldn't even plug in, but then it couldn't be used with some non-Apple LCDs, that use DVD-I connecters.

Mini display to s-video adapter wont work in windows xp

I have a Macbook 1.1 and can not get my mini display adapter to work in windows xp, it flashes a black screen really fast like it is trying but no picture.... i am running xp with service pack 3 and all updates are current, any suggestions would be greatly appreciated... thanks in advance

The adapter is a mini display to s-video

Dock to VGA Adapter Not Working

I just bought this device with great excitement only to now be seething with anger! I hope I'm doing something wrong and someone else has experienced this, overcome and now able to help me. I do not see an exact match in past posts on this topic.
Basically the device does not appear to work. I have so far tried with an HP LCD monitor and also an Acto projector: both do not detect a signal from the device. This was with Keynote and Goodreader (latest version with VGA support). I've tried re-powering, removing the cable putting back, landscape/ portrait orientation etc etc.
Is it that this device only works with specific VGA devices?
Any pointers greatly appreciated. Thank you.

Don't be angry podpad.... But I know what you mean! It would appear the VGA adapter only works in certain apps - those written to use it. The vanilla iPad only projects in keynote - when you 'play' the presentation and non DRM protected video... Yes irritating. However, I've seen several new apps come up that do support it - and a few upgrades now include it... We just have to wait.
Check out goodreader (as previously mentioned) for documents - PDF etc and Webshow (only 59p) for showing web pages.
The rest we'll have to wait for but perhaps we can keep this thread going with apps that support it and what they support!
If it's worth it... I thought it would simply display the iPad screen in everything... I was a bit peeved it didn't!

MiniDVI to VGA adapter not working

Just last night the adapter was working fine at home connected to CRT display.
But now at office it is not working connected to LCD.
Nothing happen at all, MacBook doesn't detect the connection. Nothing on System Preference > Display, and nothing on About this Mac > More Info.
Looking at the adapter pins (male MiniDVI), at first I thought 2 of the pins fell off or something but after checking internet, those pins (21 and 23) originally not installed. Thats fine.
However, some of the other pins are shorter than others.
Is this a defect or original condition also.
I am not sure the problem is with the adapter or the MacBook connector or the LCD.
Can somebody assist.
Thanks.
-will try again on the CRT when I get home.

yup. but it still didn't detect.
by the way, the connection with the LCD was working fine 2 days ago.
so i guess the problem is either with the adapter or the MacBook's connector.
is there any way to check whether it is one or the other?
(other than taking them to the service center)
Thanks Mort.
MacBook Mac OS X (10.4.9)

G5 dvi to vga adapter not working

DVI to VGA adapter not working with my G5 Dual 2.3 GHz Power PC. I am trying to use a VGA Monitor but can not get a signal. I also am using a Dell with a DVI Input and that works fine using a DVI Cable from my G5 to the Dell u2410.

Bad adapter?
The G5 ports are DVI-I. Any good DVI-I to VGA adapter should be fine.

VGA Adapter Not Working in Windows 7 (64 bit)

I was running Win7 (64 bit) through bootcamp and could not get the VGA adapter to work. I've tested it and it worked fine while under OS X. In Windows 7, it could detect the secondary display, but my monitor no has signal. I was re-install windows, but no work anytime. Anyone else encountered this issue and have a fix?
I have a early 2011 13" Macbook pro - 2.3 GHz/4GB RAM

But I have it worked fine a week ago! I think that stopped working after firmware update...

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
thanks
larry

I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
Use what you have for a system backup or for secondary backup storage.
you might be able to take the drive - most cases allow you to open and swap drives - and use this:
G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive
or this:
http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

Crystal report 9 supports frame work 2.0

Hi experts,
we are using Crysatl report 9 and build the reports using VS2003 with the frame work 1.1.4322.
We are fetching the online report by deploying the same in the IIS server which has the frame work [1.0,1.1,2.0].
When we use Asp.net frame work 1.1.433 in the virtual directory, we have are not getting any issue.
If we go for Asp.net frame work 2.0.50727 in the virtual directory, we are receiving an error message in the event log as below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 12/19/2011 10:44:31 AM
Event time (UTC): 12/19/2011 5:14:31 AM
Event ID: 3099bcd049ab452cab409d38c750f222
Event sequence: 6
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/1/Root/Solitair-Reports-2-129687452447349006
    Trust level: Full
    Application Virtual Path: /Solitair-Reports
    Application Path: C:\SOLITAIR\KAReportingSystem-Solitair\
    Machine name: AAA
Process information:
    Process ID: 3936
    Process name: w3wp.exe
    Account name: NT AUTHORITY\SYSTEM
Exception information:
    Exception type: SqlException
    Exception message: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Request information:
    Request URL: http://localhost/Solitair-Reports/Main.aspx
    Request path: /Solitair-Reports/Main.aspx
    User host address: 127.0.0.1
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\SYSTEM
Thread information:
    Thread ID: 1
    Thread account name: NT AUTHORITY\SYSTEM
    Is impersonating: False
    Stack trace:    at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at KAReportingSystem.MainForm.Page_Load(Object sender, EventArgs e) in C:\Inetpub\wwwroot\KAReportingSystem\Main.aspx.vb:line 28
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Kindly advice me
Thank you
Deepan
Edited by: Deepan1 on Dec 19, 2011 2:20 PM

Hi,
As you must have guessed, Crystal reports 9 is not compatible / tested / supported with .NET 2.0.
Take a look at below wiki.
[http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567]
- Bhushan.

One application with Multiple schemas- common application frame work

Hi All,
I am trying setup a common application frame work in apex. Please help me.
How to achieve this.
Creation of one application attached to different schemas at run time. So that my application maintaince is going to be easy instated of creating copies of same application.
More details:
1. I have one application with 100 pages pointing to a schema dev_common in one workspace APP_COMMON. I have 50 schemas with same structure of dev_common schema with different set of data ( because of large amount of data).
So I want to create one application attached to different schemas.
2. And another thing is I have 100 users, the user can work on 1 or multiple schemas ( I mean same application with different schemas attached)
Any help much appreciated.
Thanks,

Thank you for the reply.
>> b) I think you have to give access rights for the dev_common and app_common to all users.
Dev_common schema is a kind of placeholder. I have 50 schemas same as dev_common because of different business requirements but the front end is same for all 50 schemas. How can we create one application used for 50 schemas instead of creating 50 applications and 50 workspaces.
Please help me.

Adapter frame work

Similar Messages

Maybe you are looking for