Adapter has not provided any status information about this channel

Hi Team
We are facing a weird issue in sender MAIL adapter. We are using POP3 for reading the emails. The adapter runs fine and some time say once in a month it goes in error status with the below error
Once we stop and start the channel, it starts working again.
I have searched in SCN but did not find any helpful clue.
Can you please help me to find out the root cause of this problem.

Hi Hareesh
Checked the NWA logs but did not found anything for mail adapter.
I haven't restart the XPI Adapter: Mail. Just curious to find out why it happens??

Similar Messages

Do you have any more information about the Lightroom Mobile for tablet? [was:Information]

Hey just doing a check. In. Do you have any more information about the Lightroom app for tablet? Like when it is coming out, what features will it have? Because I can't Waite. Especially for editing a raw file on a tablet. Excited.
I do have a Few questions. 1. Will the app have a library mode that allows the photographer to display the raw files on the app like how photo shop touch does. Example. When your import a photo from the iPad it shows up in the photo app that Apple makes. But when you take that photo into photo shop and save it as a psdx file, the project or photo does not show up in the original photo app by apple.
2. Will the app use the smart previews when you import a raw file on to the iPad the same as you do with a computer?
3. Do you have to Waite to go home to edit a raw file or can you edit on the tablet once you import the photo from camera to iPad? Instead of going home import to computer into Lightroom 5, then to adobe cloud, then to iPad.
4. Will the app display catalog, book, etc modes like Lightroom 5 has?

At this stage, we don't know any more about Lightroom Mobile than Adobe revealed in Sep 2013
http://laurashoe.com/2013/09/09/on-the-adobe-horizon-lightroom-mobile/
Adobe will reveal more when they're good and ready.

I've preordered my iPhone 5 from apple and tried to get a sim from o2, they said I couldn't preorder. Does anyone have any information about this?

I've preordered my iPhone 5 from apple and tried to get a sim from o2, they said I couldn't preorder. Does anyone have any information about this?

Ethmoid,
Generally buying on contract or buying outright from apple with a separate sim from a provider is little difference in cost.
Work out the total cost over 24 months for the phone+monthly tarrif and you will see.
Also the contracts where the phone is cheapest but have a higher monthly cost tend to be the ones that cost you move over a 24 month period.
For example;
Using O2 UK as an example (other carriers are very similar). For the iPhone 5 64GB;
From Apple £699, plus O2 On & On £20 per month is £1179
From O2, Phone £249, per month, £41. Total over 24 months is £1,233
From O2, Phone £169, per month, £46. Total over 24 months is £1,273
From O2, Phone £69.99, per month, £63. Total over 24 months is £1,581 <Cheapest phone, most expensive
*These all use the same tarrif of unlimited talk,texts and 1GB data. The only difference is how much you want to pay upfront for the phone*
Also worth noting is buying the phone from apple and the O2 tarrif is only a 12 month tarrif so you're not locked in for 24 months.
As you can see, the cheaper the phone, the more the overall amount you pay.

SDM has not calculated any deployment actions

Hello Colleagues,
i want to install an Microsoft JDBC 1.1 driver for the JDBC Adapter Engine.
After modifying the "aii_af_jmsproviderlib.sda" with required informations and adding "sgljdbc.jar" file i tryed to import the sda archive file at SDM but i got following error:
SDM has not calculated any deployment actions.
Possible reasons.
All selected archives have already been deployed before in the same or in a higher version.
I found an import under SDM Repository "com.sap.aii.af.imsproviderlib 3.0.320040609110635.0000"
What is to do?
Perhaps new version? How can i do it?
Many thanks in advance!
Regards,
Jochen

Hi Chilla,
the problem was related to a not correct selected radio button during SDM deployment.
You have to slect "Update deployed SDAs/SCAs that have any version" under tab "Deployment" during deplyoment.
Please look up on Page 4 at HowTo Guide "How To Install and Configure External Drivers for the JDBC & JMS Adapters" http://www.sdn.sap.com/irj/sdn/howtoguides
Many thanks for support!
Regards,
Jochen

I'm running OS X 10.4.11 on my PowerMac, and cannot retrieve email. Does this have to do with iCloud? I also cannot upgrade my operating system as my computer won't accept it. Any information about this for me? Thank you!

I'm running OS X 10.4.11 on my PowerMac, and cannot retrieve email. Does this have to do with iCloud? I also cannot upgrade my operating system as my computer won't accept it. Any information about this for me? Thank you!

Hi Steve,
If this is dot mac or Mobile me you can still use IMAP eMail in the iCloud.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
    •    Server name: imap.mail.me.com
    •    SSL Required: Yes
    •    Port: 993
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
SMTP (outgoing mail server) information:
    •    Server name: smtp.mail.me.com
    •    SSL Required: Yes
    •    Port: 587
    •    SMTP Authentication Required: Yes
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Using JMX to get status information about NetWeaver cluster

Hi everybody,
We are trying to use JMX to get some status information about NetWeaver cluster.
For example, using the MBean with the name u201Ccom.sap.default:name=EL1,j2eeType=SAP_J2EEClusteru201D we can obtain the list of all instances running in cluster. Here an instance is a u201CJava instanceu201D in the NetWeaver terminology.
The method u201CgetInstanceNodeIDsu201D provides us with a list of all nodes of an instance.
Concretely, calling this method for a cluster running on one machine with two java processes, we get the following list of node Ids: u201C0, 1476420, 1476450, 1476451u201D where the last two correspond to the two java processes.
What are the first two node Ids from the list?
How can the last two node Ids be identified as java processes?
How can we obtain status information about each java process (node id) ?
Thanks for all ideas,
Radu

As there seems to be a lot of interest in this subject, and since I found some form of solution, I thought I'd share it with you.
In the es-cli interface, there is a thing called browse mode. Activate it by typing browse after logging in.
Now you can easily browse your network and all of the managed objects. Use getattributes at the end of each branch to see the properties of objects. So far, I've indexed all of the kernel reader module, the health monitor module, the common config reader and the config reader for workgroup servers. If my employer allows, I will post results to http://tille.garrels.be/training/sunmc/ - check later this week.
Machtelt.

B2B adapter is not polling any data from EDI X12 810 ECS file

Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AM

Hi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code     B2B-50547
Error Description     Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id     7F00000113CFC36785C0000017D7E2B0
Message Id     7F00000113CFC36785C0000017D7E2B0
Business Message     7F00000113CFC367A450000017D7E2B7
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest     Message Digest
Digest Algorithm
Transport Protocol     File
Transport Protocol Version     1.0
Url     file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates     certificates
State     ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size     2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM

Pegging information has not been calculate for [item] in this plan

Hello planners -
we ran across a strange thing today. We have an item in our unconstrained MRP with multiple demands and resulting supplies.
The last demand line (Sales Order MDS) shows pegging information has not been calculate for [item] in this plan - and only this line.
The item is set for End Assembly/Hard Pegging, the plan options have pegging enabled, and it works for all other demands.
Any idea why one demand line is excluded from the pegging calculation?
Thanks,
Christoph

On the surface, the item seems to have its supplies balanced to the demands – 9 sales order demands, and 9 supplies (planned orders and non-standard work orders).
A look under the hood shows some interesting things:
• The first non-standard work order is linked to a specific project (we use Seiban manufacturing).
• There is no demand for that project. That leaves the above work order hanging – it cannot be used for anything else, only this project.
• This work order also has an exception message “Items with excess inventory in a project/task” – makes total sense
• The last demand cannot peg to the existing work order, hence the somewhat misleading “pegging information has not been calculated in this plan” message
• The item shows one more interesting exception called “Demand quantity is not satisfied” – which is somewhat true.
The immediate solution is to take the project number off the work order. The next plan run has relinked all supplies and demands as needed.

My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
In the meantime, can attempt an SMC Reset to see if it helps.

Windows has the following information about this file type. This page will help you find software needed to open your file. Cannot get SEO quale loaded please help

I cannot download as I keep getting this when I try
Windows has the following information about this file type. This page will help you find software needed to open your file.
File Type: Firefox Browser Extension
File Extension: .xpi
Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
Please advise how I go about downloading

despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

How can I activate the Billing Timer icons in MacFreeLance 3.13? They are "grayed out" and unresponsive. MacXware Support Suite has not provided a solution.

How can I activate the Billing Timer icons (Go, Pause, Stop)
in MacFreeLance 3.13? They are "grayed out" and unresponsive. MacXware Support Suite has not provided a solution.

Lack of support from that company seems to be a non-uncommon problem. But it's not a problem you will be likely to get help with in the Communities, and definitely not here in the "Using Apple Support Communities" forum which is for questions about the Communities themselves. If MacWare can't or won't help you, you may be stuck, though there was an email address posted in this thread:
http://www.facebook.com/Macware/posts/327848817260562?comment_id=4108331
that may get you a response.
Regards.

Content has not sent any info back to the LMS after the LMSInitialise

We created a content piece with Cpativate 3 and it looks like
the content has not sent any info back to the LMS after the
LMSInitialise. So as per the SCORM standards, the LMS marks it as
complete when the player window closes.
The content needs to send back a status of incomplete as soon
as it has done the LMSInitialise. The lesson_status = incomplete
was sent by the LMS to the content, not the other way round.
Is this because the content was delaying sending back a
lesson_status of incomplete to the LMS, so the LMS was just marking
it as complete if the content was closed too early.
If anyone has had a similar issue like this and discovered a
fix, please let me know.
Regards,
Ryan

Hi Andrew,
Thanks for the reply. We are using Saba and they have fed
back to me that they have experienced problems before using
Captivate. I am currently trying a few different settings to see if
it is on my end. I will forwqard the piece onto you soon.

Firefix sad:"Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?" But,I can do the that from Opera...What should I do?

Copy/Cut/Paste is not available in Mozilla and Firefox.
Do you want more information about this issue?
That's what Firefox sad to me...I was Rich text editing,but I can
not use copy paste on.
I did the same site and Rich text editing with Opera,
and there was no problem.
I love Firefox,and I want ti use it,but if this is not posibile to do in Firefox,I must go with Opera from now on.
Pleace,responde to me,I need to fix a problem.
I hope you understanded my Engish!
Thank you...

Try to use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete
See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?

Copy/Cut/Paste is not available in Mozilla and Firefox.
Do you want more information about this issue?
Yes!

https://support.mozilla.com/en-US/kb/Clipboard+not+working
This extension will help you set the necessary permissions - Allow Clipboard Helper extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/852

"Print report REKORD 80 has not selected any data for correspondence SAP18"

When executed FBCJ transaction click the "print cash journal" button then appears the following message "Print report REKORD 80 has not selected any data for correspondence SAP18"
What is the procedure for to fix error?
Best regards
John

HI,
John.
please refer the following link.
correspondence type
Regards,
satish

Adapter has not provided any status information about this channel

Similar Messages

Maybe you are looking for