Adapter : Jack 3,5mm Iphone (female) - jack 3,5mm standard (male)

I have headphones for my Iphone (Sennheiser MM50 Iphone : audio stereo + micro) and I'd like to use these earphones on other devices (computer, car, other phone ...). So I am looking for an adapter jack 3.5 mm IPHONE (female) - jack 3.5 mm standard (male). Thank you for your help.

Good evening fivecircles.
There have been several other reports about the compatibility issues with the Bionic and headsets. We are currently working with the product development team for a software update to resolve this issue with the Bionic, as well as other Motorola devices. However, there is no date for this update at this time. We appreciate your patience with this issue!
Thank you,

Similar Messages

I need to know what the inside of the AC Power Adapter Jack looks like

So, basically, the pins inside the "AC Power Adapter Jack" on my Flex 10 got a bit tweaked, and now the plug won't stay plugged in. If someone could just take a picture of there's, in nice and tight, I can bend them back into the position they need to be in. Please help.
Thank you.

Your statement makes no sense.
Have you tried basic troubleshooting from the User's Guide to rule out some setting in the device preventing the speaker from working?
Is the mute switch on?
Do other sounds work?
Does it produce sound with headphones plugged in?

I have an iPad 2 and want to use video mirroring. I bought a VGA adapter for the iPad, iPhone and iPod so that I could plug the iPad into any monitor, TV, projecter, etc without it being an HD device. I plug it in and it appears the monitor has no communi

I have an iPad 2 that I want to use with video mirroring to give lectures with. I bought a VGA Adapter for the iPad, iPhone, and iPod as I want to be able to connect with any TV, monitor or projector for lectures, not just an HD device.. After plugging in my iPad to the VGA adapter and then to the video device, it appears that there is no connection with the iPad. Anybody have any thoughts?
Thanks, Steve

This article outlines how to use the Apple AV adapter or VGA Adapter to connect your iPhone 4, iPhone 4S, iPad, or iPod touch (4th generation) to an external TV, projector, or display. http://support.apple.com/kb/HT4108
This explains how to set up AirPlay Mirroring, and how to troubleshoot AirPlay Mirroring issues that may occur between your iPhone, iPad and Apple TV (2nd generation). http://support.apple.com/kb/TS4085

(iPhone4) 30 pin female connector to micro USB male connector adapter

Is there such a thing as a (iPhone4) 30 pin female connector to micro USB male connector adapter, which can transfer audio / music?
My car audio system has a 30 pin male connector for my iPhone4. Would like to use my Android phone as well.

Google it if nothing shows ,it doesn't exist

I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4. Does anyone know if this will work for my iphone 5?

I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4. Does anyone know if this will work for my iphone 5?

here is the link to Apples compatibility guide for it.
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit

Is it safe to paint nail polish on the adapter part of the iPhone charger?

I wanted to put glitter nail polish on the adapter part of my iphone charger. Is it safe??

There is nothing against it to my personal knowledge BUT I would suggest maybe buying a sparkly iPhone charging cable from an authorized store or the Apple Online Store.
But I've painted the keys on my keyboard before so it's up to you.

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

Hi Shawn,
It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
The process is easy:
) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
4) Once all of the Setup programs are completed, they will probably have you restart your computer.
All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
Good luck!
Neeraj Mathur

Hello, where can I buy a apple uk ac adapter? For my iphone 5s.

Hello, where can I buy a apple uk ac adapter? For my iphone 5s.

While in CA, the easiest thing to get would be the pin adapter to convert the US pins to fit the UK socket at any hardware store. The iPhone power adapter can handle the voltage difference without any problems.
This is what I carry with me when I travel overseas.
Allan

Quarter-inch female to a 3.55mm male to connect guitar to my Ipod Touch 4th gen. It still records from mic and not from wire.

Hey everyone, I recently bought a quarter-inch female to a 3.55mm male to connect my acoustic electric guitar to my Ipod Touch 4th gen. Now when I connect it, it doesn't actually take the sound from the wire, it still keeps the mic open. Any suggestions?

You can try putting the iPod into Recovery Mode and restoring it:
http://support.apple.com/kb/ht1808
If that doesn't work, then sorry but the jailbreak may have permanently corrupted your iPod. Since we cannot help with jailbroken devices in these forums, you'll need to look elsewhere for additional suggestions and advice.
Regards.
Message was edited by: Dave Sawyer

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums.

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums. Thank You

Same issue on my wife's iPhone 4S. I suspect it is related to the recent 6.1.2 iOS update (Note: I have a 3S and the update did not cause any issues).
I've tested both bottom and top mics on the 4S using video recorder and both mics work fine. Speakerphone and headset during calls also work fine. The issue is only related to the bottom mic while making calls. I can hear the caller but the caller cannot hear me. If I hold the mic very close to my mouth, the caller can hear a very low level signal.
The problem appears to be software related, not hardware.

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

Yeah, I did. But if I go to settings and change the standard ring tone again, the ring tone for that special contact is still the old standard tone. But I want to 'tell' my iPhone/iPad that this contact should always have the standard ringtone from settings.

Seen an adapter to plug the iphone earbuds into a standard mini jack?

There's adapters available everywhere to go the other way, but how about using the iPhone earbuds on airplanes, etc.?

My iPhone headphones worked great on the airplane. I also use them everyday with my laptop and have used them with my ipod with no problems. The extra ringlet (presumably the connection for the control features on the headphones) on the plug just isn't recognized on other devices at all....works great as the other two ringlets on the plug are for left and right audio. I did have to do some jiggling around on the airplane headphone jack to get stereo, just kind of plugging it in and rotating it, could have been a bad jack but it worked with some fiddling.

Belkin iPhone Headphone Adapter is making my iPhone lose ALL sound ability.

Before I get further into this, I wanted to say that I have since discovered how to make this issue not happen. I wanted to post it incase other people have experienced this problem as it's very strange and has already resulted in me having to get my first iPhone replaced cause I (and Apple) thought the phone was malfunctioning.
Issue: While using the Belkin iPhone Headphone Adapter attached to a car cassette adapter my phone sometimes has severe sound problems. When I arrive at my destination and need to unplug my iPhone, if music is still playing and I unplug the phone from the Belkin adapter, the resulting issue is that *I lose all sound on my phone*. It stops having an audible ring (though it will still vibrate), it does not alert me about new text messages, it also (and this is the most frustrating) makes it where if someone calls me I cannot hear them unless I put them on speaker phone.
Resolution: If for some reason this has happened to you, all you need to do is to make sure that you turn the music off while your Belkin adapter is still plugged into your phone. After the music has been paused, you can remove the adapter and it should work fine.

Thanks for posting the workaround, but it isn't just your Belkin adapter...it happens with all of the headphones as well -- if you lose your sound, put your headphones back in, and out - you might need to repeat a couple times.
This seems to have something to do with the sensors Apple builds into their iPods starting from 4th Generation onward (including the iPhone) which control your music starting and stopping when you pull your headphone jacks out -- apparently it also causes other sound problems as well.

IMac 10.4.11 Because permanent vertical lines have appeared on my screen, I need to get a new monitor. The adapter apple sells goes from female VGA to mini-DVI. What kind of cable should I get as well:female to male?

If I use an adapter (female VGA to mini-DVI) for my iMac 10.4.11 OSX, I also need a cable. Should that cable be female VGA to male VGA?
Permanent vertical lines have appeared on my display, and connecting to another display (monitor) requires a cable and adapter. I want to be sure I am purchasing the correct cable for the Apple adapter.

What made me think I need to format if I upgrade the OS?
I just presumed so really.
What made me think I need to constantly format computer with my problem?
Well, after many attempts to repair the drive, which fails, cannot even reach the log in screen, I am left with no other choice?
And also, I have to note now, System Preferences keeps crashing without reason, it either takes ages to load, just by clicking it to open, or clicking something within it, or it just crashes.
And temporarily, it freezes the computer totally, with no response.
Seriously, am I missing a system file or something? Anyone experienced this problem before?
My computer is literally a blank computer right now, installed VLC and Shades, updated Adobe Flash Player, installed Skype and Adium. I would say Growl from Adium caused it, but it has happened prior to Skype and Adium. Any ideas anyone?
Thanks,
From Lelouch

Is there a way to use the Apple digital AV adapter to mirror the iPhone 4 (not 4s) screen on my TV?

I purchased the Apple digital AV adapter and an HDMI cable from the Apple store so that I could display the content of my phone on my TV. It works for video and photo slide shows but I want to mirror my phone content like you can for the iPhone 4s. Is there a work around to make this adapter work for me?
Thanks for your help.
Diana

Rather than mirror the display, set it to 'extended desktop' and have the browser on one screen and the movie on the other.
CMD F1 will toggle between mirror and extended.
Regards,
Captfred

Adapter : Jack 3,5mm Iphone (female) - jack 3,5mm standard (male)

Similar Messages

Maybe you are looking for