Adapter messages not found
Hi all.
i have a scenario where the JMS adapter is picking a file.I used content conversion for this JMS comm channel.I am unable to see the data either in SXMB_MONI or in message monitoring,,, that is picked
by the JMS adapter.There is no problem on the MQ side..the reports show the data is read by JMS.
Are there any system settings where i can increase the trace level and find out the file.
Looking forward to your ideas......
thanks in advance
kumar
We had a similar problem - are you using a program to "put" many messages onto the Q? If you are, the correllation ID must be different on all messages, or the JMS adapter throws them away as duplicates. Try shutting down the adapter, running your put program with one message at a time, and then starting your adapter. If they all process, you have the same issue we did. We made an enhancement to our put program to simply generate a sequence for correlation ID and it works fine.
This is a feature (apparently) of JMS, although it's a flaky one. If we do a put of a single message, it has a correl ID of 1... then another put is run, also has a correl ID of 1... and the adapter processes both. But run put with both messages at once, it rejects the second one.
Note, it rejects the message regardless of payload - it's basing it on the correl ID. We made the appl ID unique, as per our consulting help, and that didn't work for us. Good luck!
Similar Messages
-
Error -: AIP-50904: ReferTo message not found
Hi,
We have 3 windows system acting as TP's (TP1, TP2 and TP3).
When the message is fired from TP1, it reaches TP2 and TP2 sends back an acknowledgement to TP1.
But when the message is fired from TP3, the acknowledgement is being sent back to TP1 instead of TP3 and the error appearing in TP1 is "Error -: AIP-50904: ReferTo message not found".
The configuration on TP2 for TP1 and TP3 are as follows:-
1) The DUNS IDs of TP1 and TP3 are the same.
2) The Delivery channel names in TP1 and TP3 are different.
3) The transport server names are the same, but their IP addresses are different.
4) The agreement names are different, but their Agreement IDs are the same.
Can you please treat this issue on priority and look into it ASAP?
Regards,
Vishal
+919881737231Hi Prasanna,
Thanks a lot for your reply.
The solution given by you worked.
But now iam getting different error at the TP2.
The ACk shows the status as complete but the request PO show error and it takes 20-30 min to process the ack.
The error it shows is as follows:-
rror -: AIP-50903: Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero
at oracle.tip.adapter.b2b.msgproc.MessageHandler.handleAppMessageRetry(MessageHandler.java:375)
at oracle.tip.adapter.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:325)
at oracle.tip.adapter.b2b.msgproc.Request.putMsg(Request.java:650)
at oracle.tip.adapter.b2b.msgproc.Request.continueRequest(Request.java:474)
at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:403)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2042)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2008.12.12 at 15:31:23:938: Thread-16: B2B - (ERROR) Error -: AIP-50903: Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero
at oracle.tip.adapter.b2b.msgproc.MessageHandler.handleAppMessageRetry(MessageHandler.java:375)
at oracle.tip.adapter.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:325)
at oracle.tip.adapter.b2b.msgproc.Request.putMsg(Request.java:650)
at oracle.tip.adapter.b2b.msgproc.Request.continueRequest(Request.java:474)
at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:403)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2042)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateMsgError(3 params) Exit
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>AC1F755611E2AA4AEA80000017749090-1</b2bMessageId>
<errorCode>AIP-50903</errorCode>
<errorText>Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero</errorText>
<errorDescription>
<![CDATA[Machine Info: (PUNIN1879164449)
Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
Can you please help me on this.
Regards,
Rakesh -
Hello All,
I am doing a file to Idoc scenario. When I open the communication channel that I created, there is a warning message popping up as below:
Adapter Engines Not Found
Unable to find associated SLD element for specified class (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, IntegrationServer.pid.svdud01, string], target element class: SAP_BusinessSystem)
Any idea on this issue techies?
Thank you.
Ramesh.Thank you all.
I have been checking all possibilities.
I tried to do the cache connectivity test in thr runtime workbench, but it throws the following error:
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Error while consolidating data
[Data Evaluation]: Couldn't parse Configuration Data cache update XML string from Directory.
I checked the technical and business systems for the PI system and they are maintained correctly.
Any more ideas ?
Many thanks. -
BPM error : Message pipeline PE_ADAPTER unknown XML message not found. Help
Hello All,
I have done 3 steps in BPM
RFC --- BPM --- RFC
RECEIVE step ==> Opens SYNCH ASYNCH bridge and receives RFC request message
SEND synchronous ==> to send RFC request and get the RFC response.
SEND ==> Closes SYNCH ASYNCH bridge and Send's response back to the RFC.
In my last send step (response back) I am getting message
"Message pipeline PE_ADAPTER unknown XML message not found" .
Pls helpHi Rick,
check out this SAP Note: 1087532
Regards
Dominic -
SXMB_MONI : Error in Persistence Layer : XML Message Not Found
Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V JayachandraHi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish -
Brrestore give error termination message not found
Dear all
i have try to restore offline backup to test system bcaz while database upgrade it got crashed it shows error ora-01157 and ora-01110 i have the backup of system
while i am trying to restore the backup it throws error terminated message not found d:\oracle\SID\sapbackup\beojggvh.afd log file incomplete
i used following command
brrestore -b beojggvh.afd -m full -c
i copied backSID.log and beojggvh.afd file from offline backup folder to target system /oracle/sid/sapbackup suggest i went wrong
i am on windows
RegardsHi,
Share the complete error log file and make sure data file using for restore should be a successful one complete offline backup.In addition share alert_<SID>.log file also.
Regards,
Gaurav -
Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
RavitejaHi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K -
Error 906 message not found on compiling form in forms builder
When compiling a form in forms builder 6i I get the message: error 906: message not found. No message file for product=plsql80 facility=PCM
What should I do?Is your PLSQL80 environment variable set? - Should point to the PLSQL80 directory as well.
If this is the only missing error that you have I wouldn't worry about it. 906 just means that PL/SQL could not compile the program unit. -
Hi,
we are currently upgrading our environment from R12.1.2 to R12.1.3.(Projects)
In the R12.1.3 there is a change in the TeamTableVO and already we have exteneded the standard VO in R12.1.2 as UDTDPATeamTableVO.
So due to oracle changes the custom VO throwed error in our page, so we retrofitted the 12.1.3 changes in our CustomVO.
After retrofitting the VO the exception page got rectified and the page loads with the following error.
Error :
Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = USTDPATeamTableVO; APPLICATION_MODULE = oracle.apps.pa.team.server.TeamListAM;
Please can anyone help us to resolve this error.
Regards,
BerchYes i have done the Jpx import after the VO sustitution. Please find the below results from DB.
SET serveroutput ON
DECLARE
BEGIN
jdr_utils.listdocuments
('/oracle/apps/pa/team/server/',TRUE);
END;
anonymous block completed
Printing contents of /oracle/apps/pa/team/server/ recursively
/oracle/apps/pa/team/server/customizations/site/0/TeamTableVO
SET serveroutput ON
declare
BEGIN
jdr_utils.printdocument('/oracle/apps/pa/team/server/customizations/site/0/TeamTableVO');
END;
anonymous block completed
<?xml version='1.0' encoding='UTF-8'?>
<customization xmlns="http://xmlns.oracle.com/jrad" xmlns:ui="http://xmlns.oracle.com/uix/ui" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:user="http://xmlns.oracle.com/user" version="10.1.3_1305" xml:lang="en-US"
customizes="/oracle/apps/pa/team/server/TeamTableVO">
<replace with="/uni/oracle/apps/pa/team/server/USTDPATeamTableVO"/>
</customization> -
Package org.apache.axis.message not found in import.
Hi,
I am using axis to give response to another bpel process after any operation is completed of a BPEL process.I am using JDeveloper to deploy my bpel process.It has succesfully deployed process without any error but when bpel server is unpacking it and deploying it to oc4j,it get error:
Package org.apache.axis.message not found in import.
06/02/08 12:40:40 import org.w3c.dom.Element;import java.util.Calendar;import java.util.Date;import com.collaxa.cube.engine.ext.process;
import com.oracle.services.bpel.task.*;import com.oracle.bpel.client.BPELFault;import com.collaxa.cube.xml.schema.XMLSchemaUtils;import com.
oracle.bpel.client.util.WhereCondition;import com.oracle.bpel.client.Locator;import com.oracle.bpel.client.delivery.IDeliveryService;import
com.oracle.bpel.client.NormalizedMessage;import com.oracle.bpel.client.IInstanceHandle;import com.oracle.bpel.client.ServerException;import
com.oracle.services.bpel.Process.*;import org.apache.axis.message.*;import javax.xml.soap.Name;
I have manually copied all axis jars to
1)OraBPEL\integration\orabpel\system\appserver\oc4j\j2ee\home\applib
2)OraBPEL\integration\orabpel\lib
But no use.
Can anybody help!I've put a lot og jar files in the bpel-inf/lib but it looks as if they are not in the class path when I need them. The result is a ClassNotFoundException? Do I have to specify anything else? I've put a class in the bpel-inf/classes and it looks to me as if it is found by the BPM.
-
Can't log into yahoo email. I get the following message: "Not Found The requested URL /mc/showMessage was not found on this server.
OK here is the problem I am having with this.. It might be related to my own machine but I need help where to look..
on the command line using mintty on XP I have this:
$ nslookup us.mg6.mail.yahoo.com
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 98.136.145.155, 216.115.101.178, 216.115.110.119, 216.115.101.179
98.136.145.157, 98.136.145.154, 216.115.110.118, 98.136.145.156
Aliases: us.mg6.mail.yahoo.com, geoycpi-uno-deluxe.gycpi.b.yahoodns.net
geoycpi-uno.gycpi.b.yahoodns.net
HOwever when I look in firebug for where the ip for the above domain is this is what I get:
66.115.130.31 clearly not listed above..
Let's check the aliases
$ nslookup geoycpi-uno-deluxe.gycpi.b.yahoodns.net
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 216.115.110.118, 98.136.145.156, 98.136.145.155, 216.115.101.178
216.115.110.119, 216.115.101.179, 98.136.145.157, 98.136.145.154
Aliases: geoycpi-uno-deluxe.gycpi.b.yahoodns.net
geoycpi-uno.gycpi.b.yahoodns.net
nope
$ nslookup geoycpi-uno.gycpi.b.yahoodns.net
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 98.136.145.156, 98.136.145.155, 216.115.110.118, 216.115.101.179
98.136.145.157, 216.115.101.178, 98.136.145.154
Aliases: geoycpi-uno.gycpi.b.yahoodns.net
nope
where is this 66.115.130.31 ip comming from.. why isn't firefox using native DNS lookup?
When I do a reserve lookup on that ip it points to nationalnet.com as the top SOA..
any ideas? -
Dear team,
We are persoanlizing iSupplier Portal . CM file extract tab
Our requirement is to add 2 new search conditions to existing search Criteria.
PO Need By Date and PO creation Date are the 2 new search conditons. datatype is date
Already
PO Need By Date exists so when we checked on querable in ak region It was dispalyed as search condition in page.
So for PO creation Date , we created new attribute, added that attribute to Object workbnch View and then to the Region
When i am checking querable , and checking CRM file tab I am getting the below error
Error
Message not found. Application: FND, Message Name: CHILD_NOT_FOUND.
Pls suggest. Its an urgent Req.
Regards,
RadhaWhen u go to the about this page.. and check how fields are defined for searching....
2 things are required.....
one create a field on which search is required..
secondly... create a mapping.... this mapping tells u that the field on which search is performed.. how is this mapped to the database column... .... i.e. on the search results on the page...
once the mapping between the field and the results table column is defined .. that error will go off.. -
Hi Team,
In My Project i am using One AM called rootAM and 2 VO's are attached with the rootAM,While running the page i am getting following error ..Please help me.......
oracle.apps.fnd.framework.OAException: Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = SearchVO1; APPLICATION_MODULE = learning.oracle.apps.icx.update.server.rootAM;Hi,
Have u deployed the VO and associted class files ?
Chk in the controller have u referred any VO with SearchVO1, it should be SearchVO. -
Getting the Adapter Class Not Found Error in the Java Manipulator
Hi,
I wrote a custom java manipulator for the baseline update and created a jar file for the class. This works fine in the Windows machine. All I have to do is while specifying the CLASSPATH, I entered the ./ib/newManipulator.jar; ./lib/additional_dependency.jar. When I tried to deploy the same code in the Unix environment, it fails saying the Adapter Class not found. The only difference from windows and Unix environment is that in the windows machine, in order to run the base line update, I go to the directory my_project->control->baseline_update.bat but in case of Unix environment I have a separate location where I have a shell script called run-baseline-update.sh located at /apps/bin which invokes the baseline.sh in the directory my_project/control/baseline.sh. I even tried to put the full path of the jar files e.g. /my_project/lib/newManipulator.jar; /my_project/lib/additional_dependency.jar in the class path but still the same issue. Any suggestions?Unix classpath needs ":" as the path separator, not ";". Changing that will make this work.
For reference, later versions of the deployment template make this configurable, so you'd see (in environment.properties):
# PATH_SEP_VARNAME: for platform-independence
PATH_SEP_VARNAME=;
# Forge needs record store libraries as well as Spring to load record store adapter configuration files
FORGE_CLASSPATH=./config/lib/java/spring-delegate-adapter-1.0.1.jar${PATH_SEP_VARNAME}./config/lib/java/spring.jar${PATH_SEP_VARNAME}./config/lib/java/eacToolkit.jar${PATH_SEP_VARNAME}./config/script${PATH_SEP_VARNAME}.
You can then add the following to your <forge /> definition in AppConfig.xml:
<arg>--javaClasspath</arg>
<arg>${FORGE_CLASSPATH}</arg>
Hope this helps.
Michael -
Crs_stat errors out with "message not found"
hi gurus
After patching patch 8705958, crs_stat errors out with "message not found" ,what could be the problem?
Thank you!Never faced such issue...
please search on metalink or raise an SR with Oracle Support..
Cheers !
Rajesh
Maybe you are looking for
-
Using 10.6.7 on a 27" iMac. In the last couple of days, when I put it to sleep using the apple icon, it wakes up after about 5 seconds. No big changes or new software. Repaired permissions. Any thoughts on how to fix the issue would be appreciated.
-
[SOLVED] Hard drive expansion options
Hello everyone, I installed Arch on a 40GB hard drive I had laying around just to try it out. I have since decided to use it as my main OS. How would I go about expanding my storage onto a second physical hard drive (250GB)? Considering I already hav
-
PS CS5 64 bit, but Bridge is 32 bit? Is this normal?
Photoshop itself is and always has been very robust, but Bridge gets persnickety sometimes, reporting low memory or just hanging, and when it hangs it really hangs... Today it was not responding and so I went into Task Manager (Win 7 Pro 64 bit) to e
-
Are there any tools provided by Oracle/BEA to convert EJB 2.x project in Workshop to EJB 3 for plain stateless session beans?
-
Group by and concat one column
Hello, i have a query that gives me the following results (example): Column1 Column2 Madrid Product1 Madrid Product2 Madrid Product3 And my problem is that i want to have just one record with a group by for column1 and a concatenation of column2 like