Adapter Monitoring in RWB

Hi-
I am having a IDOC to File scenario, The scenario was working fine but all of a sudden i am unable to send the File out,i don't see any errors in the Monitor.But the file is not present in the file system.So i went to RWB and clicked on adapter monitoring.I see all the adapter greyed out except the JPR and Xi adapter.JPR is in RED with a message.
SLD host:port = homexi18:50000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for XI3.SystemHome.homexi18 found
No access to get JPR configuration
What should i do?? is there something i should restart?
Thanks
Venkat

HI Venkat,
Can you check the File Adapter status ? Is it in Grey color ? If so , is this adapter is active in ID ?
1) Try to change something in the File Adapter and activate it . And check the Adapter monitoring for the status..
Are you able to see the messages in Message Display Tool(MDT)
i.e RWB->Message Monitoring->MDT->Audit Log
If you have still problem, then check the Adapter engine Cache etc.. Refresh the cache in SXI_CACHE for the Adapter Engine.
Check the Adapter Metadata in the SAP BASIS Component in the IR..
For more-
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps,
Regards,
Moorthy

Similar Messages

Error with JPR(Java Proxy Runtime) in Adapter Monitor of RWB

Dear Experts,
             I am implementing scenario with Client Java Proxy(Outbound) and Server ABAP Proxy(Inbound). We have done all the designing in IR and configurations in ID. We have deployed the EAR successfully. But when we go to RWB(Runtime Work Bench) to monitor the inital status of JPR in RWB->Adapter Monitor. It shows the following error.
Status     Name                                Text
Error        SLD Access                     SLD host:port = yhsapi01.yashsap.com:50000
Error getting JPR configuration from SLD. Exception: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=yhsapi01 SYSNR=00 GWHOST=yhsapi01 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Wed Jun 03 19:42:45 200
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 5521
No access to get JPR configuration

Hi!
Obviously there are more than 100 connections opened in your system.
ERROR max no of 100 conversations exceeded
Please check your gateway settings (in ABAP you can check the parameters using transaction SMGW).
Regards,
Volker

Adapter monitoring with central SLD!

Hi ,
we have central SLD in our landscape(different host from XI server),and our basis guys installed PI7.0 SP12.And AE is local as I can see under Integration server.
I can see JPR in adapter in adapter monitoring.
I have question here!
should it needs to show all the list of adapters (FILE,JDBC,JMS,SOAP etc)in adapter monitoring in RWB?does it vary,if sld is central or local ?
what is the ideal way.
thank you,
babu

where the adapter engine should appear in RWB under integration server or under non central adapter engine if we have installed central AE and central SLD?
Under Component monitoring -> Integration server -> Adapter Engine
and it has show all the adapters when we install central AE and with central SLD when we furthur click the show all adapters?
As i mentioned above, u may view all the adapters after clicking
Adapter Engine -> Adapter Monitoring
or is it changed since PI 7.0 to cummunication channel monitoring and no adapter monitoring?
Yes. Now the monitoring of adapters r much intensively done by Communication Channel Monitoring
Regards,
Prateek

In the rwb adapter monitoring the JDBC Adapter always grey

Hi all
I try to use JDBC Adapter in XI 3.0 sp14.
First I deploy the MS SqlServer JDBC by SDM RemoteGui.I can see the deployed JDBC package in \j2ee\cluster\server0\bin\ext\com.sap.aii.af.jmsproviderlib.
Then I create a communication Channel using JDBC 2.0 in a Business System and active the configuration.
But when I monitor JDBC Adapter in the rwb, I find the JDBC Adapter is always grey.In the \server0\log\services\com.sap.aii.adapter.jdbc.svc, no log shows the jdbc adapter is initial.
So what extended configuration shall i do.
Thanks in advanced
Elliott

hi Alessandro,ravi:
Thanks for your reply. I will describe detail.
I use a file adapter as a sender and use a JDBC adapter as a receiver.
In the sxmb_moni I find the processed message status is successful.
So I think the integration server works fine.
In the message monitoring, the message is waiting status.
If I change the receiver adapter to file adapter.
It works fine.So I think the process config is fine and the itegration server works fine. the error is in the receiver JDBC adapter side.
I check the default trace, there is error logs:
#com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
#sap.com/com.sap.aii.af.ms.app
#com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(QueueMessage, MessageController, Services)
#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction :
[057ffffffb160017c]
#cgbasis.comgroup.cn_XID_5746950#XIAFUSER#0a056bc0900311daa9ca0013d4b31c7c#SAPEngine_Application_Thread[impl:3]
_36##0#0#Error##Java###Rolling back transaction for
message due to: #2#d2fe2281-8fd4-11da-cf7f-
0013d4b31c7c(INBOUND)#Object not found in lookup of
SapXIJDBCAdapterService.#
#com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer#sap
.com/com.sap.aii.af.ms.app#com.sap.aii.af.ra.ms.impl.core
.queue.ReceiveConsumer.invokeHandler(QueueMessage, MessageController, Services)
#J2EE_GUEST#0##cgbasis.comgroup.cn_XID_5746950#XIAFUSER#0
a056bc0900311daa9ca0013d4b31c7c#SAPEngine_Application_Thread
[impl:3]_36##0#0#Error##Java###Transaction rolled back
for meesage due to: #2#d2fe2281-8fd4-11da-cf7f-
0013d4b31c7c(INBOUND)#Object not found in lookup of
SapXIJDBCAdapterService.#
In the adapter monitoring, JDBC Adapter icon is grey. I
can't click for detail information. I only deploy the
JDBC drivers by SDM remoteGui. What else shall I do.
Btw, Can you say sth detail about how to test the
deployed JDBC adapter on visual administrator?
Thanks
Elliott

RWB- adapter monitoring - IDOC missing ?

Hi, I can not see IDOC adapter in adapter monitoring(RWB). when I tried to execute my scenario(File to Idoc), I got the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MI_Cremas_IA</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface MI_Cremas_IA</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
1. How do i check if IDOC adapter is running ok or not?
2. I am sure IDOC adapter is installed as I can see adapter metadata objects under http://sap.com/xi/XI/System of SAP BASIS swcv in IR. What configuration I need to do to make IDOC adapter appear in adapter monitoring(RWB) ?
3.Is above error due to problem with interface determination or receiver determination ?
Please help.

Hi,
1. File to File works fine. I just tested this.
2. File to File using BPM works fine. I just tested this.
3. File to IDOC is failing with the following error message. I have checked port and RFC destination in XI server which are working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MI_Cremas_IA</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface MI_Cremas_IA</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Does this due to any authorizations error ? Please help.
I have tested the configuration in ID which looks good except a message(sender agreement not found).
SXI_CACHE is upto date.
CPA cache refreshed successfully.
SAI_CACHE_RERESH report failed with cx_ai_cache_xms exception. How to fix this. Not sure if this is causing any cache problem.

HI in production system RWB adapter monitoring

HI in production system RWB adapter monitoring , i am using FILE and RFC , but i am not able to see the Adapter monitoring any thing the both are in grey colour ,
please help me in that
sridhar

Hi,
Can you please tell me your XI SP.?.
bcoz.. in New SP version..
We have to see in the following link for channel monitoring and adapterframework
http://host:port/mdt/monitorservlet?objectName=type=XIAdapterFramework
OR
http://host:port/mdt/channelmonitorservlet..
If solved .. points rewarded please..
Regards
Chilla..

Cannot send file to XI ,and File Adapter Error in RWB- Adapter Monitor

i develop the file to file scenario, and everything in Integration Builder is right, and the configuration is no problem
but it cannot send file to XI, so the whole process
cannot start. The file adapter seems not work
how can i solve the problem?
Thank you for your reply

Hi Leo,
I Guess you should first see if the file is being picked... for that do the following.
While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
In your runtime workbench home, there will be a tab, Component Monitoring, click on it. Select status as all, and click on display. The components will be displayed on ur screen. In that, under Integration Server, there will be a link for Adapter Engine. Click on it. Now, scroll down, and u will see a link to adapter monitoring, there under FILE ADAPTER see the log of the file adapter
and also, you can see the flow of your message in the integration engine in SXMB_MONI.
Do this and let us know what is happening...
Meanwhile i would also suggest you to go through the explanation of a simmilar scenario that i have explained below and compare it with what you have done..
Please go thru the following links and clear all your doubts.
Communication channel:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/b11c409ce22402e10000000a1550b0/frameset.htm">Assigning Communication Channels</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/2b/d5653fd1d3b81ae10000000a114084/content.htm">Communication Channel</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm">Configuring the Sender File/FTP Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm">Configuring the Receiver File/FTP Adapter</a>
Receiver agreement:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/56/02e63f48e58f15e10000000a155106/frameset.htm">Receiver Agreement</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c1/5194426b44c56ae10000000a155106/frameset.htm">Creating a Receiver Agreement</a>
Sender agreement:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/frameset.htm">Sender Agreement</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/522041cfb7f423e10000000a155106/frameset.htm">Creating a Sender Agreement</a>
For detailed info, I would suggest that you go through these weblogs:
<a href="/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1">Introduction to simple(File-XI-File)scenario for Starters</a>
<a href="/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2">Introduction to simple (File-XI-File)scenario for starters part2</a>
I hope it helps.
Regards,
Abhy

Link to Communication Channel and Adapter Monitoring not opening

Hello All,
we are on PI 7.0. In teh RWB, we are not able to see the Communication Channnel Monitoring as well the Adapter Monitoring It is giving Page cannot be Displayed.
please tell us the way ahead.
Regards
Chakra and Somnath

Hi Somnath,
when the error occurs check the url of the page that cannot be displayed and verify if the hostname is correct.
It could be a problem of not right setting in exchange profile.
Also verify that you have enough authorization, trying to logon with PISUPER user if you can.
Hope it helps,
Regards,
Sergio

Sender ADapter Monitor- ArrayIndexOutOfBOunds Exception

Hi
As me subject line reads, I am getting an "ArrayIndeXOutofBOunds 9" exception at the sender adapter monitor logs in the RWB.
I have an adapter monitor module that picks up the file from the source and pushes the file to a target directory based on some condition. I am able to see the file being pushed to the target directory but not able to view the "pipeline steps" in the message monitor.
Do you think a restart of the server might fix the issue/ do you think there is a problem in my code. I have used just one array and i have checked that array if it is being accessed out of its bounds?
Thanks
krishna

Hi,
>>>>>ArrayIndeXOutofBOunds 9"
looks like an error in code
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

XI Adapter ? No messages in the adapter engine in RWB

Hi Guys,
I have the scenario SOAP-PROXY. I have configured XI Adapter on the receiver side. I have used xml spy to post the messages directly to the IS. I could not see any messages in the adapter engine in RWB.
I have seen the messages processed successfully in the integration engine under RWB.
can anybody explain why i could not see any messages in the adapter engine ? Is It normal with the xi adapter on the receiver side ?
Thanks,
Raj
Message was edited by:
raj reddy

Raghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos.

Adapter Monitoring

Hi,
My RFC senario is giving me an error,I went to component monitoring-->Adapter Monitoring and saw the list of adapters.I see that the RFC adapter is red,does it mean the adapter is down?how do I troubleshoot it?This is the error I have in RWB.
Sender channel 'CC_RFC_*********' for party '', service 'SYSTEM_XI_010'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcServerPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: User is locked. Please notify the person responsible
Thanks

Hi,
->According to our error above you have problem with your gatway connection . can you make sure ur using correct gateway service. something like sapgw00 00 is system number. you get this in smgw.
->Check that the RFC Destination that you have created Do Connection Test & Remote LOgon also Re-Enter the User & Pwd Once again.
Please take a look at the below error. It looks like same error what you have.
RFC sender adapter error
Plz do refer the following links:
JCO_ERROR_RESOURCE
/thread/2978 [original link is broken]
Number of connections expiry problem - URGENT
Please reward points if it helps
Thanks
Vikranth

Comm Channels are not seen in the Communication Channel Monitoring in RWB

Hello All,
I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
Thanks in Anticipation
Best Regards
Chakra and Somnath

Hi,
1. Check created the Busieness system to identify your XI System.
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
2. In XI Tcode : SXMB_ADM
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Go to SXMB_ADM
Execute Integration Engine and Configuration
Click on Check button check the SLD working fine or not.
Regards,
Venu.

Communication channel monitoring, adapter monitoring error

Hi ,
I am using SAP PI 7.0 with HP-UX.
Here we have 6 logical hosts in one physical host.
Physical host name is u2013 xyz
Integration server name u2013 sappid
The Central SLD: sappid
URL for sappid: sappid: 50300
When I monitoring RWB----
>communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 ) and getting page cannot find error.
1.SLDCHECK
   http://xyz:50300/sld
   host name: xyz
port number: 50300
user : SLDDSUSER
2.SXMB_IFR
   http://xyz:50300/rep/start/index.jsp
3.SMICM
   icm/server_port_0 = PROT=HTTP,PORT=8003
   icm/server_port_1 = PROT=SMTP,PORT=0
   icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
   icm/host_name_full = sappid
4. SLDAPICUST
    SAP_CONFIG   1   xyz   50300   SLDDSUSER
5. SXMB_ADMIN
    Role of Business System Integration Server
    Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
   Integration Engine Configuration Data -> Check button
6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
XI start page.
    when I opened the http://sappid.AIG.com:50300/
   the page not found issue, when I opened http://sappid:50300/ I got the
   XI start page.
plz help me for this issue.
thanks in advance.
regards,
reddy.

Hello,
I think the FQDN is not set properly.
Problem in the parameter
SMICM
icm/server_port_0 = PROT=HTTP,PORT=8003
icm/server_port_1 = PROT=SMTP,PORT=0
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
*icm/host_name_full = sappid *
Replace this parameter in instance profile
icm/host_name_full = sappid.AIG.com
Then in the host entry of your server please add an entry
172.18.23.233(ip your ur Xi server)       sappid.AIG.com
Then let us know the result.
Thanks and Regards
Vijay

Java.lang.OutOfMemoryError during message monitoring in RWB

Java Engine Problem during message monitoring in runtime workbench!!
Posted: Nov 12, 2007 2:13 AM Edit E-mail this message Reply
Hi,
Our integrating processes are processing successfully.
But there is a problem during message monitoring.
When I use message monitoring in RWB,
Integration Engine monitoring has no problem.
But there is a problem during displaying adapter engine monitoring.
The message is "java.lang.OutOfMemoryError: Java heap space".
So I cannot see any adapter engine message.
Actually same error occurred 3 weeks ago.
At that time, we solved the problem with restarting java service.
Does anyone know about this appearance?
And is there any other solution about this problem??
Thank you.

Hi,
As per the error analysis, it seems that the java heap space is low. So need to increase the heap size.
1. Go to the C:\SAP\JP1\JC00\j2ee\configtool folder
2. Start configtool.bat
3. Go to cluster-data -> template - template_javaee -> instance - IDxxxxx
4. Go to the VM Parameters tab and edit the maxHeapSize property
5. Save and restart the system.
I hope this will solve the problem.
Regards,
Sarvesh
***Reward points, if it helped you.

Adapter Monitoring not visible

Hi,
I am not able to view Adapter Monitoring page in RWB. Rest all the pages from RWB are visible. Even in Message Monitoring option, under Adapter Engine, I am not able to see the details of message.
I want to check status messages in receiver adapter. I have a file to mail scenario, in which file is picked up properly, I am able to see the successful message translation in SXMB_MONI. However, I am not receiving mail to my mailbox. I am not able to track the problem because I cannot view Adapter Monitoring page.
Please let me know possible solutions to this one.
Thanks,
Bhavish

Please look for the Channel Monitoring in XI 3.0 RWB. Adaptors are now part of channel monitoring in XI 3.0 now.
Also note that XI have two type of adaptors ( Adaptors handled by J2EE Server and Adaptor handled by the Integration Server) RWB is only the J2EE side and if the adaptor belong to that category you will see the adaptor status in channel monitoring, otherwise note.
To get the bottom line of it, go to XI Cache using SAP GUI, update the XI cache (complete update) Look into the cache entries for communication channels, check the type it should be CAE (Central Adaptor Engine), if it is IS( Integration Server) you will not see that adaptors messages in RWB.
Thanks
Thanks

Adapter Monitoring in RWB

Similar Messages

Maybe you are looking for