Adapter Monitoring not visible

Hi,
I am not able to view Adapter Monitoring page in RWB. Rest all the pages from RWB are visible. Even in Message Monitoring option, under Adapter Engine, I am not able to see the details of message.
I want to check status messages in receiver adapter. I have a file to mail scenario, in which file is picked up properly, I am able to see the successful message translation in SXMB_MONI. However, I am not receiving mail to my mailbox. I am not able to track the problem because I cannot view Adapter Monitoring page.
Please let me know possible solutions to this one.
Thanks,
Bhavish

Please look for the Channel Monitoring in XI 3.0 RWB. Adaptors are now part of channel monitoring in XI 3.0 now.
Also note that XI have two type of adaptors ( Adaptors handled by J2EE Server and Adaptor handled by the Integration Server) RWB is only the J2EE side and if the adaptor belong to that category you will see the adaptor status in channel monitoring, otherwise note.
To get the bottom line of it, go to XI Cache using SAP GUI, update the XI cache (complete update) Look into the cache entries for communication channels, check the type it should be CAE (Central Adaptor Engine), if it is IS( Integration Server) you will not see that adaptors messages in RWB.
Thanks
Thanks

Similar Messages

Adapter Engine not visible in RWB

Hi Guys,
         I coudnt find the Adapter engine in Component Monitoring and Message monitoring in RWB.
while displaying the components of Integration Engine getting the below error. I am using PI 7.1
Kindly let me know where to check if the components are not visible in RWB.
java.lang.NullPointerException:
     at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:635)
     at com.sap.aii.mdt.web.MonitorDynPage.process_go_button(MonitorDynPage.java:496)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:102)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
With Regards
Pradeep N

Check page 129 of this document:
[SAP XI TroubleShooting Guide|https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E]

Link to Communication Channel and Adapter Monitoring not opening

Hello All,
we are on PI 7.0. In teh RWB, we are not able to see the Communication Channnel Monitoring as well the Adapter Monitoring It is giving Page cannot be Displayed.
please tell us the way ahead.
Regards
Chakra and Somnath

Hi Somnath,
when the error occurs check the url of the page that cannot be displayed and verify if the hostname is correct.
It could be a problem of not right setting in exchange profile.
Also verify that you have enough authorization, trying to logon with PISUPER user if you can.
Hope it helps,
Regards,
Sergio

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

Mini DisplayPort to DVI Adapter - Monitor not recognizing

I have a new MacBook purchased last month from Apple to replace an older MacBook. I used a Scepter X20 monitor on the previous MacBook with an adapter with no problem. With this new computer, I had to puachase a Mini DisplayPort to DVI Adapter. I plugged it in as I did for the other computer, and the monitor doesn't recognize it at all. I checked the monitor by plugging it into another Mac (older version) with adapter and it works fine. Why will my Mac not recognize the monitor or the monitor recognize that it is connected?

On the very slim chance this might be problem, it happened just last week to another poster and it's happened to me, the mini display port really takes a good shoving into the graphics card. Sometimes it will look perfectly seated in there, but it's not quite.
Aside from throwing that out there, I would think if that wasn't the case, you may be having problems with the adapter itself. The whole mini display port is ridiculous in itself, but the two lessor expensive adapters I bought from Apple worked very poorly anyway. And on Apple displays!
The $99 dollar one Apple sells has a reputation for working the best, but I haven't tried it. There are also devices now, still pretty expensive, that seem to bypass those altogether.
I can't say if some other issue is going on or not, there may be. But just know you're not alone in having display problems of this kind.

Adapter Engine not visible in SLD, RWB and Directory

Hi all,
I have problem with the registration of the adapter engine in my sld. When I search for it in Technical Systems doesn´t appears.
I have implemented SAP notes 764176 and 804124 and it doesn´t work.
My system is SAP PI 7.0 and the SLD is configured on a differente machine. The SAP PI machine can reach SLD machine (is not network problem).
Any suggestions?
Thank for your postings.

Hi -
Do you have your SLD Data Supplier service (within Visual Admin tool) for PI Java server pointed to the host of the SLD machine? If so, you should at least see a Technical System (type Web AS Java) for your PI system in your SLD.
Regards,
Jin

JMS Adapter service not visible

Hello All,
I am trying to configure JMS adapter for my scenarios.
I am unable to see SAP XI JMS Adapter service in the Visual Admin.
Also when activate the communication channel. In the RWB it gives error "No adapter registered for the channel"
What could be the issue?
Thanks

Hi Prabhu,
Is it newly installed server,.??? if yes may be installation not done properly i guess...refresh the cache,is problem persist contact basis team.
Regards,
Raj

MDM PI Adapter not visible

Hi experts!
I have deployed this files to get MDM PI Adapter:
MDMCONNECTOR08_0-20008055.SCA         Connector
MDMJ71008_1-10006189.SCA                      JAVA API
MDMADAPTER08_0-10005238.SCA              PI ADAPTER
My PI version is 7.0 SP19.
My MDM version is 7.1 SP8.
I can't view "MDM PI Adapter" in list of Communication Channels in Integration Directory.
Any idea?

Hi,
see sap help: [Installing the MDM PI Adapter |http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/970f1155493987e10000000a421937/frameset.htm] and especially the part "[troubleshooting|http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9871410e0e0e27e10000000a421937/content.htm]"
And I invite you to check the oss notes on service.sap.com (use terms "MDM PI ADAPTER"), because for instance you will see these ones:
[Note 1455796 - MDM PI Adapter Compatibility|https://service.sap.com/sap/support/notes/1455796]
[Note 1614819 - MDM Adapter type not visible in PI Integration Directory|https://service.sap.com/sap/support/notes/1614819] New !
regards
mickael

T42 and LAN adapter not visible

Hi, I have a T42, which worked flawlessly until I've had to replace the HDD in my pc and installed XP SP3. Wireless works but I cannot get the LAN adapter to work. The Intel LAN adapter is NOT visible in device mgr. I have solved all the hardware conflicts from the XP install. t42-2373-C28. How can I get the hard wired LAN to work?
thanks
Bob
Solved!
Go to Solution.

I would be assuming your installed http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4ZLNJB along with http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62922 ? If lead_org's test does not work. Try uninstalling the ethernet driver and see if DRIVERMAX will find the driver for you. http://www.drivermax.com/ Have you also checked the Network connections to see what it says?
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Non central adapter engine & adapter monitoring

Hi ,
we installed PI7.0 sp12,and can we see all the available adapter as a list in RWB and adapter monitoring if adapter engine installed as non central?
And we will see Adapter engine under Integration server if AE is centran and under non-central adapter engine if AE is non central ,right?
thank you,
Babu

I could see both Communication Channel monitoring as well as Adapter monitoring.
but once I click adapter monitoring I could see only JPR but not any other adapters.if I click CC monitoring there are no CC cos we havent created any yet.
I am asking like,if we see only JPR in adapter monitoring not any other adapter ,is that a error while doing the installation and configurations? or is that ok?
thank you for your reply.
Babu

GTX770 TF 2G OC is not visible in CC

Hi @ll,
I built up a new system with a MSI Z87 G45 Board and a GTX 770 TF 2G/OC. I'm using Windows 8.1 (64bit). Almost everything is working well, even Windows. :-) However, if I'm starting the MSI Command Center the graphic adapter is not visible. So I can see the RAM and the processor and fan but as I mentioned not the GTX 770.
I have installed the newest nvidia driver.
Who knows or is knowing the problem?
THX in advance
Meph

Jennifer,
I would suggest you try this also.,
VIRSAR3_01_MODEL
VIRSAR3_01_METADATA
And I believe you have defined your SLD data supplier in the SLD.
Thanks.
Regards,
Muthu Kumaran KG

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Communication channels not shown in adapter monitoring

Hello everybody,
we got several communication channels running on the same file-adapter.
But in adapter monitoring only ONE communication channels is shown.
The other communication channels are not shown although we expected them at least with an error.
Any ideas?
Thanks a lot
Regards Mario

Hi,
I think, you have chosen the selection criteria only for the Correct one in the Page.. Check with All information in adapter monitoring screen.
Following will be looked once you don't have any adapters are visible..
Check SAP BASIS Content is imported in the IR or not.
Check this thread also-
Problems in adapter monitoring
Regards,
Moorthy
Message was edited by: Krishna Moorthy P
Message was edited by: Krishna Moorthy P

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

Adapter Monitoring not visible

Similar Messages

Maybe you are looking for