Adapter Monitoring with CCMS

Hi,
is there anybody who already set up an adapter monitoring with CCMS using the alert framework of Runtime Workbench ?
Background:
When using the existing MTE's in CCMS (J2EE Monitor Templates - All Systems - <SID> - J2EE Applications - SAP XI Adapter Engine) only rare monitoring information related to XI messages are posted.
What I would like to see are information about the adapters provided in the logfiles of each adapter.
For example as soon there's a permission problem for a directory in File Adapter an alert in CCMS should be raised.
I already checked SAP notes 870232, 913858 and 824039.
Any feedback appreciated.
Cheers,
Juergen

Hi,
You can configure the CCMS as per the following two blogs,
Part 1: /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Part 2: /people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configure the Alert Framework with the below Blog as reference,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Then forward the Alerts created in the CCMS to Alert Frame work, the required steps are given in the below help links.
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/30/62e77b2f4865488a866d4103923a93/frameset.htm
Then any alerts that gets generated in CCMS can be passed to the Alert Category kept configured in the Alert Framework.
Hope this helps you

Similar Messages

Plain Http adapter Monitoring with CCMS / Alerting framework

Hello all,
Can you explain me the optimal way to monitor process using plain http adapter (Sender AND Receiver).
My goal is to push issue information as soon as possible to monitoring team (via CCMS) when the process is in error.
During my tests, I ve had a lot of messages with ICM HTTP error 110 but Integration engine did not trigger any alert.
Thanks for your help.

Hi,
Check this link for ICF trace.
http://help.sap.com/saphelp_webas620/helpdata/en/2d/64d041e74911d6b2e400508b6b8a93/content.htm
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
regards
Aashish Sinha
PS : reward points if helpful

RFC monitor with CCMS

Hello,
I'm implementing RFC monitor with CCMS and I have a problem.
I was able to implement the method with an auto-reaction method of send mail.
It is working fine but it doesn't repeat the alert! Let's say, imagine that the RFC isn't working since 3am... we are now at 13pm and the alert is not triggered anymore. In fact, in RZ20 I just see 1 Alert triggered at 3am.
Is there any way to set this alert to trigger every period of time?
thanks.
regards,
Filipe Vasconcelos

Hello,
first it would be good to clarify which monitor are you implementing - there are multiple RFC monitors - for example:
Availability and Performance Overview Monitor :
http://help.sap.com/saphelp_nw70/Helpdata/en/ae/cd823bd26a5c42e10000000a114084/frameset.htm
Transactional RFC and Queued RFC Monitor
http://help.sap.com/saphelp_nw70/Helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
Best to type the name of monitor as displayed in RZ20.
Based on the type of monitor you might find the answer here:
http://help.sap.com/saphelp_nw70/Helpdata/en/f6/c55c3bab977239e10000000a114084/frameset.htm
(for example for status monitor you can set option "When should a message trigger an alert?" to "Always (at every message)")
Anyway I am afraid that in case you are using performance monitor there is not much you can do. Possibility can be to check if data collection method (for example function) has parameter that can do this (but I am skeptical about this) - if not then you would have to adjust data collection method or implement the monitoring in another way.
Possibility can be to use some kind of "switch". You can activate option "Display All-Clears in Alert Browser" - this will generate green alerts. Then you can program your own autoreaction method that will perform the "switch operation" (simple insert/update/delete into some Z-table you will create - based on status of alert - red/yellow/green.) Then you can have batch job running another Z-program that is reading this value and constantly reminding use via email.
If you program this in a good way (abstract autoreaction method) - you can reuse this solution for other monitors as well and easily buid you own email notification functionality.
I hope it helps.
Best regards.

Adapter monitoring with central SLD!

Hi ,
we have central SLD in our landscape(different host from XI server),and our basis guys installed PI7.0 SP12.And AE is local as I can see under Integration server.
I can see JPR in adapter in adapter monitoring.
I have question here!
should it needs to show all the list of adapters (FILE,JDBC,JMS,SOAP etc)in adapter monitoring in RWB?does it vary,if sld is central or local ?
what is the ideal way.
thank you,
babu

where the adapter engine should appear in RWB under integration server or under non central adapter engine if we have installed central AE and central SLD?
Under Component monitoring -> Integration server -> Adapter Engine
and it has show all the adapters when we install central AE and with central SLD when we furthur click the show all adapters?
As i mentioned above, u may view all the adapters after clicking
Adapter Engine -> Adapter Monitoring
or is it changed since PI 7.0 to cummunication channel monitoring and no adapter monitoring?
Yes. Now the monitoring of adapters r much intensively done by Communication Channel Monitoring
Regards,
Prateek

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed

Monitoring multiple background jobs with CCMS

Hi,
     Can multiple background job be monitored with the help of CCMS.If yes then    is it adviseable to go ahead with that or not?
     Say the number of jobs to be monitored are 1000 in SCM.....
     If yes plz suggest me how the same can be done ?
Regards
Siddharth

Yes Multiple jobs can be monitored using CCMS .. You dont have to monitor all the jobs , you can restrict it by entering the job name in ALBTCMON . The following link will be helpful
http://help.sap.com/saphelp_nw04s/helpdata/en/1c/48803d48de0610e10000000a114084/content.htm
Thanks
Prince Jose

Error with JPR(Java Proxy Runtime) in Adapter Monitor of RWB

Dear Experts,
             I am implementing scenario with Client Java Proxy(Outbound) and Server ABAP Proxy(Inbound). We have done all the designing in IR and configurations in ID. We have deployed the EAR successfully. But when we go to RWB(Runtime Work Bench) to monitor the inital status of JPR in RWB->Adapter Monitor. It shows the following error.
Status     Name                                Text
Error        SLD Access                     SLD host:port = yhsapi01.yashsap.com:50000
Error getting JPR configuration from SLD. Exception: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=yhsapi01 SYSNR=00 GWHOST=yhsapi01 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Wed Jun 03 19:42:45 200
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 5521
No access to get JPR configuration

Hi!
Obviously there are more than 100 connections opened in your system.
ERROR max no of 100 conversations exceeded
Please check your gateway settings (in ABAP you can check the parameters using transaction SMGW).
Regards,
Volker

Issue with AS2 Adapter monitoring

Hi All,
I am using Seeburger AS2 Adapter in our XI project we are able to post and retrieve
messages through AS2 communication,but we are facing the problem of monitoring the messages if any incoming messages failed in the AS2 adapter only due to some network failure or some other issue we are not able to track which message is failed and what payload it contains as in Adapter Monitoring or communication channel monitoring AS2 Adapter shows the only "Failed Session"
Do we have any application to monitor it in XI.
Regards
Gaurav

Hi Gaurav,
Have you tried Tcode SXMB_MONI . In this by giving some details about your scenario, it will give you the information about all the messages which are successful or not. Here you can see the payload af successful messages and error in failed message by clicking on the perticular message.
hope this will help.
regards
HONEY

Seeburger adapter monitoring

We are running Seeburger AS2 adapter with XI3.0.
All inbound messages that the adapter can handle are passed to XI and we have access to those from XI message monitoring.
From there we have alerting setup.
Whenever an external party presents a message with a bad certificate the AS2 adapter refuses the message.
We can see trace of that in the adapter monitor. But there is no message in error passed to XI. So nothing we could get in message monitoring.
We saw we have a logfile containing those errors on the server. We could setup a logfile monitor on this file and get errors in CCMS. And from there, we could trigger alerts. But that does not look very elegant.
Is there a best way to get Seeburger adapter error generating alerts ?

Hi,
If the check is happening in the Adapter then the Alerts needs to be raised by Adapter framework.
So you have to set up Alert rule for the Adapter framework.
The message goes to message montioring only if the adapter sends the date to the Adapter engine and then you can see the message in the message monitoring.
If the rejection is at AF levelt hen you need to check in the Communication Channel if you are getting the Error?
Regards
Vijaya

How do I use two external monitors with my laptop?

I have a new Pavilion dm4-301 d cl Entertainment PC. My OS is Windows 7. I am used to using two external monitors with a docking station. This new laptop does not have a docking station. What do I need to get to use two external monitors?
This question was solved.
View Solution.

Certainly not without a dock but even with, HP laptop docks pretty well limit you to one of the external monitor ports, even if there are two on the dock. We have used a device called an Atlona AT-HDPIX2 which is a usb to hdmi adapter. It provides a third monitor capability for a laptop....use the native external monitor port and the internal laptop display and then this device gives a third monitor which is full configurable from the Windows 7 display interface...clone, extend, etc. It allows full HD resolution and is responsive enough for even light gaming. HP makes no true docking station for your laptop.

Using ADC Monitor with the new Mac Mini

My husband has an Apple monitor with an ADC connection. I would like to purchase the new Mac Mini, but would like to use his current monitor. I know there is an ADC to DVI adapter, but the new Mac Mini uses the Mini Display...could I use yet another adapter? I am trying to save money, but don't want to the display quality to be really poor. Space is not an issue. Any help would be greatly appreciated.

I have located that, but my concern is the DVI connection to the Mini Display connection on the Mac Mini. My understanding is that they are different.

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
About Mini DisplayPort to HDMI adapters

Mini dvi to dvi adapter interferes with airport ?

Hi,
I am seeing slower network speed (20% of the normal speed), when I use the mini-dvi-to-dvi adapter... I also have a mini-dvi-to-vga adapter which doesn't cause this network speed degradation.
I guess the dvi adapter somehow interferes with the signals the airport sends and receives. The adapter comes with a very short cable (a couple of inches), so I can't move it out of the way to reduce interference (assuming that is the issue).
In both cases, the adapters connect to the same external display (1920 x 1200) and they both work fine for my monitor. But I'd like to use the mini-dvi-to-dvi adapter because of the (slightly) better picture quality.
But perhaps it's not interference, anyone else has ideas ?
Unless anyone has a suggestion, I am going to return the mini-dvi-to-dvi adapter because it's pretty useless if it interferes with the airport.
For now, I'd recommend others to buy a mini-dvi-to-vga adapter for their external displays...
iMac, Mac Book and Mac Mini Mac OS X (10.4.8)

Yes, I have that option set... but your response reminds me that that I haven't tried setting it off, see if that makes a difference (would be quite ironical if setting off "robustness" fixed it
Since yours works, I wonder if it depends on the wireless router I use; I have a Netgear WTG624
Thanks,

Link to Communication Channel and Adapter Monitoring not opening

Hello All,
we are on PI 7.0. In teh RWB, we are not able to see the Communication Channnel Monitoring as well the Adapter Monitoring It is giving Page cannot be Displayed.
please tell us the way ahead.
Regards
Chakra and Somnath

Hi Somnath,
when the error occurs check the url of the page that cannot be displayed and verify if the hostname is correct.
It could be a problem of not right setting in exchange profile.
Also verify that you have enough authorization, trying to logon with PISUPER user if you can.
Hope it helps,
Regards,
Sergio

How to use two monitors with my Mac mini

Hello,
I have a Mac mini and using a 20" Samsung Monitor with it which works well. I also have my 40" LCD Samsung telly, set up next to it. Whenever i watch a DVD using my Mac i have to swap over the cables. Is there a way of getting the right cables etc and making it so i would be able to watch a dvd on the 40" and still use the 20" surfing the net etc. I had a similar set up with my old windows laptop, but cant seem to work out how do it with the mac. Both monitors have modern sockets, the 40in has HDMI/DVI IN and AGV, the 20" has AGV and HDCP/DVI IN. Many thanks.

To the best of my knowledge there is no way to use dual displays on the Mini. You may be able to find some adapter that will allow you to physically connect two displays, but they will be mirrored, not spanned.
To do what you describe would take spanning, which the Mini is not capable of doing. Unless something has changed recently,..

Adapter Monitoring with CCMS

Similar Messages

Maybe you are looking for