Adapter Object Marketing Planner

Hi Forum,
I have an issue with the Marketing planner transfer to R/3 Project systems.
Is there a way to find the Table details of the source and target for an adapter object crm_mktpl_r3int.
I have created the site types, subscription objects and all the customization for integration in both CRM and R3 as well as PS also. But now when I run the initial load it says no table found for data exchange
When I go to r3ac1 and check the adapter object for marketing planner there are no tables defined for the source and destination. I am confused because in R3AC3 there are too many tables for different objects of marketing planner and campaigns.
Is there a way to find the Table details of the source and target for an adapter object crm_mktpl_r3int.
Are the tables cgpl_project (source) and PRPS (target) correct
Regards,
Amit

Hi Raj,
In my opinion these are intermediate table since I checked them and they are still empty. I had already released 4 campaigns so if these were the initial tables to start with then all those 4 campaigns should have been here.
The direction of CRM_MKTPL_R3MAP table is from crm to r3 so it is source table and it shud have those 4 campaigns.
The direction of cgpl_r3_attribut is R/3 to crm so it is the target destination. so it will receive at the r3 end.
On the other hand cgpl_project has all the entries so I have used it as a source and PRPS as target But still the queue is in wait status.
If you have this scenario configured plz check in r3ac1.
Regards,
Amit

Similar Messages

Permanently delete Campaigns from Marketing Planner and Reuse Campaign ID

Hi,
Does anyone have a suggestion how we can delete the campaigns from the Marketing Planner permanently so we can re use the campaign ID?
Thanks,
Niversphere.

Hi,
you might try this. Make sure you have not still scheduled any dependent objects of a marketing plan and campaigns (e.g. campaign elements belonging to the campaign, conditions). In customizing you are able to archive marketing projects. You are able to delete all marketing projects that are successfully stored in the archive from the the database.
Let me know if you need further help.
Marcus

Marketing Planner - PCUI Question

Within the Marketing Planner, we would like to remove the default values of Campaign Element and Campaign Element Copy from the "New" button of the MKT_PL_OIP toolbar. Can anyone tell me how this can be done? Possibly through security or through PCUI config? Any input would be greatly appreciated.
Message was edited by:
Kristi Sigler

Hi Kristi
You need to follow these steps to remove it. It cannot be achieved through PCUI config.
1. copy the MAC CL_CRM_BSP_MKTPL_ACC_TREE to ZCL_CRM_BSP_MKTPL_ACC_TREE and assign it in your application set.
2. In the method OIC_FILL_EVENTGROUP of class ZCL_CRM_BSP_MKTPL_ACC_TREE, delete from internal table lt_object_type_text, object type CPG where CPG stands for Campaign.
This should resolve your problem.
Regards
Karthik

Editing Marketing Planner

Hi forum!,
I am editing the marketing planner adapting to the rules of my client. Well, i have added some fields with the EEWB tool, but now i would like to generate a table or do something like a table...my question is: Is that possible? generate a table like a grid in the screen painter but in the EEWB¿? or only i can add fields..
Thanks and regards,
Mon

Hi Ramon,
I think you can add only individual fields. Look at <a href="http://help.sap.com/saphelp_crm50/helpdata/en/e3/3573b4229add4fa4e07abc35bc2559/frameset.htm">http://help.sap.com/saphelp_crm50/helpdata/en/e3/3573b4229add4fa4e07abc35bc2559/frameset.htm</a>
Regards.
Manuel

How to get the connected Adapter Object for a particular BDoc Type?

Hi All,
I have a scenario in which CRM system is connected to ERP system.
In SMW01 transaction, I can see one BDoc with BUS_TRANS_MSG as the BDoc Type in CRM.
Now, how do I get to know if this one BDoc is a SALESDOCUMENT or SALESCONTRACT.
Is there any way thorough which I can get to know the Adapter Object for this particular BDoc.
Regards,
Madhuri

Hi Madhuri,
Happy new year.
In Transaction : R3AC1.
You can observe the Linked BDOC for the adaptor objects. For example Sales docuemnt and Sales contrcat will have the same linked BDOC as "BUS_TRANS_MSG".
If you see an error in SMW01, you want to find whether it is salesdocument or contract.
1. Please take the Queue name from SMW01.
from the queue name you can find whether it is sales contract or sales document.
Queue name is customized in tables: SMOFQFIND.
I hope this helps you.
regards,
Sri...

Short dump while executing Market Planner

Hi,
Working on CRM4.0 sp6 .
While executing Market Planner(CRM_MKTPL) getting dump....
Syntax error in program "CL_CRM_MKTPL_APPL_BASE==============CP".
Can enyone help out.
Thanks,
Anirban

Hi Anirban
In general, if you are getting a syntax error in a standard SAP program (non 'Z' namespace for ABAP) then you probably should search the SAP Service marketplace for notes. Particularly in an older SP like yours.
There are other notes to consider, eg 735219.
If you do not find a note, then you probably want to take advantage of SAP's AGS and create a customer message. It may be a newly discovered bug.
Cheers
Dom

How to debug mapping module of a Adapter Object

I have created an Adapter object which will send data from ECC table to CRM. In the Table/Structure tab, I have mentioned the ECC table name for which data will come.
A FM is created to convert data and is mapped in Mapping Module of the object.Now though initial load is running sucessfully, table entry is not inserted in CRM table.
Though I have given breakpoint in the FM, it is not triggering. Is there any way out to debug the FM.

Hi,
Can you let me know the download status of your adapter object using txn. R3AM1? If it is DONE, you can trigger another initial load.
The inbound queue formation on CRM is governed by USE_IN_QUEUE field of table CRMRFCPAR on the ECC for your adapter object. It should be set to X. So in case there's a specific entry for your adapter object in CRMRFCPAR, just check it.
If this setting is already maintained you should see a queue name like R3AI_<objectName> in SMQ2 of CRM. Of course you'd need to deregister the R3AI* queue in txn. SMQR.
Thanks,
Rohit

Campaign Code in Mail forms and Marketing Planner - Campaign

Hi Experts,
What is the purpose for campaign code field? How to generate this field value in Mail forms?
Why it appears in marketing planner - campaign.
Anybody please help.
Thanks in Advance,
Suvitha

Hi Dipesh
Thanks for your reply. I want to know how this campaign code is related to the product order number?
Where you will specify which product you are offering discount?
when u execute the campaign Campaign Code will be read from campaign. -- Can you explain me in detail this statement
Thanks in advance
Regards
Suvitha

Last Record in Marketing Planner BSP

Hi all,
I use Marketing Planner on BSP. When a user logins to system to directly marketing planner (?appl=CRMD_MKTPL), he gets the last trade promotion he created or changed on the system.
And when he wants to create a new trade promotion it is shown under the old one in the Marketing Projects hierarchy.
Any ways to make user see the a blank page he can create new trade promotion when he logs in.
Thanks
Utku UTKAN

Hello Utku,
I think this problem is very similar to the problem described by Vishal Lahoti in the topic Default Query not getting executed in PCUI. Perhaps you should post OSS Messages referencing each other to get a soluton from SAP.
Regards
Gregor

What is the use of Adapter objects in I.R

what is the use of Adapter objects in I.R

congratulations you successfully opened 1000 new threads...
adapters are components of the adapter engine, their main action is to connect different sysems with each other. therefore are different adapters:
SAP-2-SAP Adapters: like IDoc and RFC
SAP-2-NOT-SAP-ADapters: like JMS, JDBC, HTTP..
and B2B Adapters...
there are some rules in any board that you should accept:
use search first
use the sap help http://help.sap.com/
and read the forum rules
regards cc

BP for CRM 5.0 Marketing Planner

We have Portal 2004s SP10, CRM 5.0 and installed Business Package for CRM 5.0. We are only using one iView at this time, Marketing Planner. Two issues with the iView.
1) Once I do anything to this iView, it retains this view until I either do a complete new search or physically change view. This is causing frustration if someone just wants to create a new plan.
2) When we have clicked new and then want to leave the iView, it states "all relevant fields have not been entered" and will not let the person leave the iView.
3) If the link to the iView is clicked on again, to refresh, this opens up the portal in a new window, this is not good.
I am assuming if I can get rid of problem 2, 3 will go away; but does anyone have any hints on how to get the iView to resume to it's blank state after leaving the iView such as logging out?
My client will be very happy for your help!
Leland

(Correction)
The step it is getting frozen is just before the 'Start Deployment' Step

Block size in middleware adapter object

Hi
Am trying to download customers from ECC to CRM.
If the block size is set to 1 in CUSTOMER_MAIN adapter object, and if i download a request (R3AR4) with a range of 20,000 (say 1,00,000 to 1,20,000) this request gets downloaded fine. The same happens for block size 3.
But if i try with block size 100 and increase the range to 20,000+ , the CRM system comes down. It gets into an infinite loop i think. Then i require to restart the CRM system.
Has anyone come across such a situation or someone can suggest whats going wrong?
Thanks for your help in anticipation.
Karthik

Hi,
Did you try with the block size of 1000? This is the standard value. Give a try
Do not forget to reward if it helps,
Thanks,
Paul Kondaveeti

Adapter object for table smorelation

hi experts,
do you know the use of table smorelation? i can not see any data in that table in crm.
is it used by BP hierarchy? if yes then which adapter object to be used to download data in this table?
any help will be reqrded.
thanks,
sagar.

Hi Prabhu,
Suppose customer specific (Y & Z) Transaction/Sales-Document types and customer specific item categories are created in CRM or ECC. These cannot be downloaded via any(initial, delta n synchronization) of the downloads. We have to do this manually as there is no standard adapter object available for these.
So as the item category determination. It should be done manually.
In ECC Item category determination, we need sales document type (say ZOR) and item category (say ZTAN). These will not be replicated or downloaded to CRM.
So we need to create them manually in CRM and also the item category determination should be done manually.
If any sales-document-type / Transaction-Type or item category is created newly in ECC/CRM in production environment, item category determination should be done manually in ECC and CRM for those newly created ones after creating them in CRM and ECC.
Pls don't forget to reward points if it helps
Vikas

What is Adapter Metadata in Adapter Objects

Hi All,
Q1) What is Adapter Metadata in Adapter Objects in IR ??
Q2) What is Communication Channel Template ???
Wxplain me the Purposes
Regards
Vamsi

Hi Vamsi,
excuse me for my delayed reply.
We can use Integration Scenario from Integration Repository as a template for generating configuration Objects. It takes you through the configuration process, step-by-step. The objects required for the configuration are created and existing objects are checked to ensure that they can be used before including them in a scenario. The relevant objects are predominantly created automatically. The whole process is logged so that you have a good overview and can analyze and understand the configuration.
So Integration Scenario helps you to generate Configuration objects in ID. The configuration wizard that is already there is different might be both the intensions are same.
>>Here I am Saying We can have all those If we Use Configuration Wizard
yes u are exactly correct
But by importing Integration Scenario from IR you will get Integration Scenario Configurator which will embed all the templates and actions included in IR will be generated.
Hope this time you are clarified.
Regards,
Ramesh P

Error while transfering condition adapter object

In ERP I created new condition table A940 that uses also VKBUR (sales office). On CRM side I did all the steps according to Note 674538 - Copying conditions for sales office VKBUR into CRM.
When I ran object DNL_CUST_CNDALL everything was transfered ok and in CRM condition table CNCCRMPRCUS940 was created succesfully.
Next I created new adapter object to transfer entries of table 940 from ERP to CRM as copy of one of standard objects. But when I run it the load finishes with error in SMQ2 wirh the error Access via 'NULL' object reference not possible.
Any hints?

Hello Robert,
Note 1301829 should solve the issue.
thanks
Willie

Adapter Object Marketing Planner

Similar Messages

Maybe you are looking for