Adapter On Url

How Can I Apply Adapter Pattren On The URL Class As It Is a Final Class

http://www.msi.com.tw/program/support/download/dld/spt_dld_list.php?kind=1&CHIP=17&NAME=Archives
you have the number wrong some were
6905 is to high a number for a slot 1 board

Similar Messages

Adapter Engine URL missing in RWB

Hi All,
In my newly configured PI 7.0 system, the Adapter Engine URL is missing at the fol. location:
RWB -> Component Monitoring -> Adapter Engine -> Test Message.
But when I open SXI_CACHE -> AE Cache, I am able to see the url http://pidev:50000/MessagingSystem/receive/AFW/XI
I think that this means that my ABAP stack is configured properly, but JAVA stack has some problem for Adaptr engine.
Please confirm if I am right and how to resolve this.
regards,
Piyush

Hi,
Are you using the FQHN?
Check also note #764176 if you have components missing on SLD.
Last, you may want to configure your system in order to check each of the steps.
Use this link -> Wizard-Based Basic Configuration:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
Regards,
Caio Cagnani

Receiver Adapter - Target URL/SOAP Action

Hi,
Can I just confirm the following 2 values required on a SOAP Receiver adapter:
Target URL : Location within SOAP:Address tag of WSDL
SOAP Action: SoapAction within SOAP:Operation for relevant Web Service method within WSDL
Cheers,
PaulC.

> Target URL : Value of SOAP:Address tag from web service WSDL
right, it is attribute "soapAction"
> SOAP Action: Value of SOAP:Operation for relevant Web Service method within web service WSDL
right. attribute "location"
check this guide:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4

Want to Change Adapter Engine URL!

Hi Experts,
Currenly my Adapter Engine URL: http://<server>:8001/MessagingSystem/receive/AFW/XI
I wan to change the Adapter Engine URL to: http://<server>:50100/MessagingSystem/receive/AFW/XI
How can it be changed?
Thanks,
karthik

Hi Nisar,
Thanks for response.
I executed a file to file scenario. There I got HTTP error with 404. When I tried to solve it, I found this difference in SXI_CACHE.
In SXI_CACHE-> Goto-> Adapter Engine, an entire is present but with the URL having port 8001.
I belive it has to be changed to 50100.
Kindly help!

SOAP Receiver Adapter - Target URL

Hi,
We have a web service scenario, where the Sender is a III Party Java system and PI is the middleware and ECC as our receiver system. We have a wsdl binding generated from SOAMANAGER. We are using the WSDL Endpoint as the Target URL in our SOAP Receiver Adapter. The scenario works perfect with desired results.
Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
Has anyone come acrossed such issues. Looking forward for a solution.
Thanks & Best Regards.
Kris

> Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
>
> Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
>
> Has anyone come acrossed such issues. Looking forward for a solution.
I wonder why your basis team is not able to help you.
It seems that the web dispatcher is not set up correctly.
http://en.wikipedia.org/wiki/HTTP_302

SOAP Receiver Adapter - Dynamic URL

Has anyone tried modifying SOAP URL dynamically using UDF in the mapping?. I searched Forum and couldn't get right answer. Does it work with Adapter Specific settings and variable transport binding? Please donot post links to other posts unless it got an answer or atleast close to being answered. We are on PI7.0. Thanks

Hi,
I have similar situation. My target URL lookslike this
http://devlsales.test.com:8000/soap/services/AdapterService which is a working right now.
With Variable transport binding ( TServerLocation ), Can I change http://devlsales.test.com from above URL to
http://devlprofits.test.com and remaining text same resulting
http://devlprofits.test.com:8000/soap/services/AdapterService by using UDFs.
Thanks
ST
Thanks

HTTP reciever adapter pass URL parameters

Hello all,
I have a question regarding passing parameters as querystring in the url of reiever HTTP adapter. This is an RFC> XI> HTTP scenario and we're posting to an external URL. Here are the details
URL: xxxx.yyyyy.com
Service Number: 80
Path: /api/company_codes
It works fine with these. I want to pass a parameter called "bulk" with value "1".
How should I do it. Should I append it to the Path directly like
Path: /api/company_codes?bulk=1
or enable Apply URL Parameters under Adapter Specific MJessage Attributes and fill in
Parameter 1 : bulk=1
Could somebody clarify this please?
Thanks
Karthik

Can anybody help wwith this please?
Thanks
Karthik

Sender http adapter - decoding (URL unescape)

PI 7.0
Incoming http request in XI is URL decoded. Currently I am using java mapping to decode it. Is there a way to set any adapter specific properties in sender http adater so that I can avoid the java mapping for decoding. Or any settings in SICF? In other words, how can XI handle encoded http requests?
When XI makes a external http request, I can set a property "Mask Special Charcters (URL Escaping)" in the receiver http adapter. XI will make a encoded http request, meaning the xml will encoded in UT-8.

Hi Ted,
I'm currently trying to do something like that, but not yet totally successed with a base64 encoded payload.
Here two documents that I really find interresting:
How to Configure Message Level Security in SAP Exchange Infrastructure 7.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
How to handle unstructured source contents for Adapters (with Java mapping or with Module)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/482aae19-0301-0010-3485-8efd618818d0
if you find others... I'm ok to know it also
Cheers.
Mickael

Problem with Axis Adapter endpoint url in WSDL file.

Dear experts,
We are using PI 7.1 ehp1 with a SOAP to RFC scenarios using the Axis adapter.
We have the XIAxisAdapter as sender Communication Channel and the related Sender Agreement.
When i am looking into the WSDL file of the Sender Agreement than the endpoint contains ...location="host:port/ XISOAPAdapter /MessageServlet"... in stead of ...location="host:port/ XIAxisAdapter /MessageServlet"...
The url with "XISOAPAdapter " will not work. When i export the WSDL file and manually adjust the location to "XIAxisAdapter " everything works fine.
Is it possible to directly generate a correct WSDL with calling the url http://host:50000/dir/wsdl?p=xxxx?
Thanks in advance!
Best regards,
Joost Weghorst

Hi Sonya,
You can use configuration plan while deploying composite.
The configuration plan enables you to define the URL and property values to use in different environments. During process deployment, the configuration plan is used to search the SOA project for values that must be replaced to adapt the project to the next target environment.
Please refer this doc. for getting introduced to config plan.
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE10908
To deploy soa composite with config plan refer this doc:
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE85469

Adapter engine URL different between CACHE and RWB adapter engine URL?

Hi there,
If I go to SXI_CACHE and go to the adapter engine runtime cache I get a URL of:
https://<server>/MessagingSystem/receive/AFW/XI
NOTE: The above URL is HTTPS.....and there is no port in the above....
However, if I go to the runtime workbench and click on the adapter engine and click on "test message", I get the following URL:
http://<server>:<port>/MessagingSystem/receive/AFW/XI
NOTE: The above url is HTTP and there is a port.
How can I get these URL's back in sync?
I want them both to be HTTP.
Any ideas?
Thanks

Hello
1) Check the value of the Exchange Profile parameter 'com.sap.aii.connect.secure_connections'. If you don't wish to use HTTPS this should not have any value set.
2) Delete the Adapter Engine cache in trx sxi_cache -> Goto -> Adapter Engine Cache -> Delete Cache Contents (trash can icon).
The AE cache will be populated the next time a message is sent through the system. Check the value after this is done.
Regards
Mark

HTTP Receiver Adapter : Dynamic URL

Hi,
I have a scenario where I wish to build a dynamic URL for the HTTP Receiver Adapter. The URL will contain a customer number which is present in the mapping.
The help seems to suggest that this is possible :
<i>If you want to use an HTTP destination or URL set by the mapping, set the URL or HTTP Destination indicator. (The indicator displayed depends on the Addressing Type you selected above). If you set the indicator, the URL or HTTP destination set dynamically is called by HTTP.
If the message header does not contain the URL or the HTTP destination, and you have set the Fail If Adapter-Specific Message Attributes Missing indicator, the XI message is set to status System Error. If you do not set the indicator, the URL or HTTP destination defined statically in the communication channel is used.</i>
However, it is not very clear where the URL needs to be set dynamically.
Does anyone know how to achieve this ?
Cheers
Colin.

hello to all,
We have a unique issue with one of our customers that is limited to 100 character URL. The current url is http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck&interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
Is there a way to have a URL like
http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck
and then somewhere in the process add... &interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
So the data comes to an F5 through the DMZ to the SAP webdispatcher then to the SAP XI system.
Any ideas if this is possible or how you could start with a shorter URL?
Thanks,
Dede

SOAP Receiver adapter target url and method details

Hi Friends,
I am working on file to SOAP interface.
I know using SOAP receiver adapter , we need to have target URL and action.
Here, how client need to give target url and action as they are not aware of these things..please suggest.
Also if we are generating inbound service interface,how they have to handle this from their end.
Thanks
Kishore

Get the WSDL file from ur Third party client and u can use the WSDL file as an External definition in PI and WSDL file also has WSDL URL which u can use in SOAP receiver adapter.
For INbound SOAP case-
Generate the WSDL file in XI and give that WSDL file to ur third party client which will send the data using the WSDL URL mentioned in the file.
refer below blog for understanding in detail:-
How to use SOAP adapter:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
chirag

Soap Receiver adapter , Target URL and Soap Action

HI all,
WIll anyone tell me regarding Soap action, casue , they have given a URL which i have put in Target URL, but i am not able to understand what is SOap action what need to be put in this
Thankign you
Sridhar

i Sridhar,
In XI SOAP adapter we need two things:
SOAP URL: which is endpoint to the webserver.
SOAP action: describes particular method name we wanted to excute on that web applicaiton hosted on the webserver.
WSDL file has normally multiple operations(methods) , so we execute particular method by giving particular action name.
Action is not mandatory parameter i guess, this is in case , when wsdl is exposing only one method(action).
:Normally you can find SOAP Action element under element <SOAP:operation name = "XXX">
Hope this clears.
Cheers,
Div

Outbound HTTP adapter and URL parameters

Hi all
I'm having some trouble with a XI scenario I'm supposed to implement.
I should get invoices from a vendors webserver using a url with parameters (ex. http://myvendor.com/getinvoice.jsp?invoiceid=12345) and send it as INVOICE IDoc to the R/3.
I thought that would be an easy one using the Plain HTTP-Adapter but I can't figure out how to build the URL. Is there a way to do that, or do I need to implement my own adapter??
Thanks in advance
Stefan

Hi experts ,
I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
service number : port no ,
path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test= or should it be &test= .I tried this but it doesnt work.So please provide help on this as soon as possible or please suggest a solution at [email protected]
Thanx in advance,
Akshata

Multiple adapter engine URL's found

Hello,
In the integration directory, when we tried to add a communication channel or change a currently existing communication channel we get an error " Attempt to determine which Adapter Engines are affected by data changes failed". We did a cache refresh and in AE runtime cache we find the AE name changed to "CA" with a new adapter engine name. The default was "AE" with the adpater name blank. Also in the cache notification of ID there is an "Unknown error" in red and in the cache instance we find 2 adapter engine instances.
Where can we find the actual adapter engine set up for the integration server ?? and How can we revert back to the original settings??
Any help is appreciated.
-krishnan

Hi Murugadass,
This link provides all details pertaining to adapter engines, expand them further to get information
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/frameset.htm
Also have a look at this thread:
No adapter engine when Adapter type as File
Hope these help and do not forget to assign points for helpful answers!
Cheers,
Chandra

Adapter On Url

Similar Messages

Maybe you are looking for