Adapter Pack 3.0

After the CU3 Adapter Pack was installed we started experiencing this error - System.FormatException: Failed to convert parameter value from a String to a Int32. Error is related to the calling of a Stored Proc that has an Output paramter declared
as INT. There is a documented solution to resolve this for CU2 but none for CU3, and a Microsoft rep said the fix for CU2 won't work for CU3. As the rep didn't know the CU3 fix and I find nothing on the web does anyone know the fix? Thanks

FYI, we wrote a blogpost on this situation: http://blog.codit.eu/post/2013/08/26/Breaking-change-in-BizTalk-Adapter-Pack-2010-CU2.aspx
Also check out following link for more information and a suggestion on the solution: http://blogs.msdn.com/b/apacbiztalk/archive/2013/06/05/system-formatexception-throw-after-applying-biztalk-adapter-pack-2010-cu2-when-insert-an-empty-int-element-into-sql-database-using-wcf-custom-adapter.aspx
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

Similar Messages

Biztalk Adapter Pack Eval license uninstall, install licensed version.

I need to know the proper way to uninstall the eval Biztalk Adapter pack and install the licensed version.
Is it just uninstall the current version and install the new one?

Refer: How
to upgrade trial version of BizTalk Adapter Pack 2.0 to the licensed version
Steps are:
Stop BizTalk services and SSO Service
Take Backup of the BizTalk databases
Stop SQL server agent
Uninstall Evaluation version of BizTalk Adapter Pack (This clears all registry entries from the environment)
Uninstall WCF LOB Adapter SDK
Install WCF LOB Adapter SDK
Install Licensed version of the BizTalk Adapter Pack
Start BizTalk services and SSO Service
Start SQL server agent
Regards,
Rachit

Does BizTalk adapter pack 2010 support SAP ECC6 EHP5?

SAP Adapter BizTalk Adapter Pack 2.0:
Supported server versions: SAP ECC 6.0 Non-Unicode, SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode,
SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode
SAP Adapter BizTalk Adapter Pack 2010:
Supported server versions: SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP
R/3 4.6c Non-Unicode, SAP ERP 6.0 with EHP 4.0
None specifically says it supports ECC 6.0 EHP5. But, I was able to find several posts that they are integrating with SAP ECC 6 EHP5 using BizTalk adapter. However, I would like to make sure whether Microsoft officially supports or not in case of technical
issue occurs.
Does anyone have an answer?

I appreciate your response but I'm afraid that the information you have given is what I looked up before and thought they can't be an answer. As I already have stated in my question, I found several posts saying that they are integrating with ECC 6.0 EHP5
with BizTalk Adapter. With that, I can assume the BizTalk Adapter would work with EHP5 of ECC 6.0 as EHP is just an EnHancement Package. However, it does not mean Microsoft will support it when there is a technical issue unless it is stated so. So, what I
want to confirm here is more about liability. I cannot suggest my client to use BizTalk based on assumption.
To save anyone else's time, following are SAP versions supported by each BizTalk Adapter pack. None specifically mentions EHP 5. Can anyone from Microsoft or partner confirm this??
SAP Adapter BizTalk Adapter Pack 2.0:
Supported server versions:
SAP ECC 6.0 Non-Unicode, SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode
SAP Adapter BizTalk Adapter Pack 2010:
Supported server versions:
SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode, SAP ERP 6.0 with EHP 4.0
SAP Adapter BizTalk Adapter Pack 2013:
Supported server versions: SAP 7.2, SAP 7.0, SAP ERP 6.0 with EHP 4.0, SAP ECC 6.0 Unicode

BizTalk Adapter Pack support for Oracle Database 11.2

Hi All,
Is there a BizTalk Adapter Pack release that officially supports Oracle Database 11.2.0.3
Thanks
Steve

Hi,
The BizTalk 2010 adapter pack for the Orace adapter also supports 11.2
See also:
BizTalkServer 2010 Oracle 11g Release2
http://social.msdn.microsoft.com/Forums/en-US/508063f5-b370-406c-a703-842db787b2cf/biztalkserver-2010-oracle-11g-release2?forum=biztalkr2adapters
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly

BUZZING Magsafe AC Power Adapter pack

My Magsafe AC Power Adapter pack is making a buzzing noise when it's connected up to the electricity! I've tried it in different sockets around the house and it's still making the same noise.
Don't know if anyone can help or reassure me before i contact Apple UK
Regards,
Terry

All that you need is a standard international plug kit. The adapter itself will work at any voltage. Apple has an international kit -> http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit?fnode =3c.
Clinton

Travel adapter pack and Macbook

I'm upgrading to a Macbook and I travel a lot.
There is a list of Macs/iPods that are compatable with Apple's 'world wide travel kit' - the MB 'pro' is listed, but the MB is not listed - is this an oversight. Can, or can I not use it?
Powerbook Mac OS X (10.3.9)

Just to add a little… you might want to additionally get yourself a notebook surge protector like those from APC…
http://www.apc.com/products/family/index.cfm?id=173
… so you don't get youself, or you MacBook, blown up.
By the way, they do go inbetween the adapter and the plug adapter (items from the travel kit) so your mileage may with how well they go together.

A tough question regarding the AC adapter packed in with the iBook G4

I have had this iBook less than a year after buying it new from Apple and along with it, I bought Applecare for piece of mind.
Now onto the question here. The "Duck" connector (the flip out AC prongs) that connect to my power brick has failed and I was informed that this was a "consumable" by an Apple representative even when talking to a "higher up" along the support chain. He informed me that it was in my included documentation but if this was included, I asked him just exactly what page might I find this on or a page detailing just what is covered or not covered when it comes to the Applecare warranty on portables. Needless to say, I did try combing the site and my original print manuals and Applecare paperwork saying nothing about "consumables" when it comes to a notebook computer.
I ended up setting out and buying another USB iPod charger just for that silly connector so I could charge my battery but still puzzled by Apple's response to this.
Anyone else ever experience such great service or a similar problem with the power brick in general? (sarcasm...)

On my iBook models using the same white cube power adapter, I've used
only the cord they supplied with the adapter; and have not used the odd
toggle/plugin it shipped with. I heard stories about the connection not
being as good if that little part was used, so I always use the long cord.
No issues; I plug the AC cord into the power first, and the little DC cord
into the computer second. Less sparks, too; and not as big a shock to
the computer as plugging it in the other way.
Someone may be able to get just the replacement part you seek without
buying another complete adapter. If I could find the small plug part, I'd
just send it to you; but I think it got lost or ran away due to disinterest.
[To just replace that part of the adapter, when travelling overseas
would be a better idea (to comply with local power-port shapes)
than carrying a whole set of power cord adapters. I wonder if
they sell just that part in that Apple universal power adapter kit?]
I also have a second complete new adapter in the original sealed package;
so I hope it works when or if I need it. The part should be under the extended
warranty; just like I was told the battery should be, too. These factoids may or
may not be true. Or if they were, perhaps they no longer are. A product specialist
would be one to ask what the policy is on an exact item. I'm not that!

How to get IDoc Status from WCF Service Adapter?

I have successfully transfered a strong typed Idoc to SAP using a BizTalk WCF Service Adapter. I did so based on this example: [http://msdn.microsoft.com/en-US/library/cc185231(v=BTS.10).aspx]. We are using the IDoc to create a purchase order. The IDocClient.Send(idoc, ref guid); method returns only a guid. I can translate that using the SapAdpaterUtilities to a transaction ID. When I look at the Idoc in WE02, I can see that it has status information which includes the purchase order number. Is there any way for me to capture this status information in my .Net application when I send the IDoc? Can I query the transaction ID? Or do I just need to get the last PO Number through an RFC?
Scott

I ended up using the SAP .Net Data Provider in the Biztalk Adapter Pack to retrieve the PO Number. Essentially when you pass the IDoc you won't get anything in return unless the file transfer fails.
Scott

SAP adapter giving the merged result set (First RFC call data + Second RFC call data) for second RFC call

I have a WCF Adapter service to call a SAP RFC. When I call the RFC first time, it gives me correct no of result set but when I call this RFC second time immediately after first call, it gives me merged result set (First Result set + Second Result Set).
e.g. We have a RFC which receives vendor number and blank object of result set as parameter and gives back the list of purchase orders as Response in object of result set for that vendor.
Suppose, we have a vendor "a" and vendor "b". For vendor "a" there are 5 purchase orders and for vendor "b", we have 4 purchase orders in SAP. When I call the WCF adapter service for this RFC for vendor "a",
it gives me 5 purchase orders. Immediately after first call, when I call WCF service for vendor "b", it gives me 9 (5+4) purchase order records which is wrong.
In brief, one RFC call is affected by its previous call.
For each new WCF request, a new object of result set is created, connection is opened, rfc is executed and connection is closed.
Can anybody have any idea on this?
Thanks.
Thanks, Nishant Gupta

Hi，
Please refer to the document
http://seroter.wordpress.com/biztalk-and-wcf-part-vii-about-the-biztalk-adapter-pack/

BizTalk 2009 WCF-SAP Adapter Could not load file or assembly 'Microsoft.Adapters.SAP.SAPGInvoker...' one of its dependencies error

Hello,
I have a BizTalk Server 2009 running on Windows Server 2003 x64. I am installing WCF-SAP adapter and have done the following for the same. However, I am getting an error as mentioned below when I click on the Configure button of WCF-SAP adapter in send
port. I would appreciate if anyone could let me know how to fix this error and make the WCF-SAP adapter working.
TITLE: BizTalk Server 2009 Administration Console
Exception has been thrown by the target of an invocation. (mscorlib)
ADDITIONAL INFORMATION:
Exception has been thrown by the target of an invocation. (mscorlib)
Could not load file or assembly 'Microsoft.Adapters.SAP.SAPGInvoker, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. This application has failed to start because the application configuration is incorrect. Reinstalling
the application may fix this problem. (Exception from HRESULT: 0x800736B1) (Microsoft.Adapters.SAP)
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1)
I have copied the following 32 bit & 64 bit unicode DLLs in SysWOW64 and System32 folders respectively.
icudt30.dll
icuin30.dll
icuuc30.dll
librfc32u.dll
libsapu16vc71.dll
libsapucum.dll
Following r3dllinst DLLs are there in System32 folder.
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
Following r3dllinst DLLs are there in SysWOW64 folder.
mfc40.dll
mfc40u.dll
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
mfc80.dll
mfc80u.dll
msvcp50.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
I have the following softwares installed on the server.
Microsoft Visual C++ 2008 Redistributable x64
Microsoft Visual C++ 2008 Redistributable x86
WCF LOB Adapter SDK (64-bit)
BizTalk Adapter Pack 2.0 (64-bit)
BizTalk Adapter Pack 2.0 (32-bit)
The following bindings are also present in the machine.config under Framework\v2.0.50727\CONFIG and Framework64\v2.0.50727\CONFIG
<system.serviceModel>
<extensions>
<bindingElementExtensions>
<add name="sapAdapter" type="Microsoft.Adapters.SAP.SAPAdapterExtensionElement, Microsoft.Adapters.SAP, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</bindingElementExtensions>
</extensions>
<client>
<endpoint binding="sapBinding" contract="IMetadataExchange" name="sap" />
</client>
</system.serviceModel>
Thanks,
Tarun

Have you tried this?
http://geekswithblogs.net/MoonWalker/archive/2013/07/17/could-not-load-file-or-assembly-microsoft.adapters.sap.sapginvoker.dll.aspx
Morten la Cour

SAP Adapter Issues

Dear All,
Facing two issues as below, any help/pointers greatly appreciated.
1> Where can I download correct Oracle AS Adapter pack which will support SAP ECC 6.0?
2> Using the Adapter pack for 10.1.3, I am able to connect to SAP using Application Explorer, browse the Business Objects & RFCs. Then I have generated an Outnound JCA service (request-response) using the Adapter application explorer (right click menu option). Next trying to invoke the JCA service from BPEL using a partner link, when it gives following error at runtime. The same RFC when tested from Adapter applicatio explorer, however, runs fine; the problem occurs at BPEL runtime.
(input_BAPI_COMPANYCODE_GETLIST,output_BAPI_COMPANYCODE_GETLIST) ] - WSIF JCA Execute of operation 'BAPI_COMPANYCODE_GETLIST' failed due to: Adapter Framework unable to create outbound JCA connection.
http://127.0.0.1:9080/orainfra/wsil/adapters/applications/BAPI_COMPANYCODE_GETLIST_invoke.wsdl?wsdl BAPI_COMPANYCODE_GETLISTPortType::BAPI_COMPANYCODE_GETLIST(input_BAPI_COMPANYCODE_GETLIST,output_BAPI_COMPANYCODE_GETLIST) - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Adapter 'SAP' not available. Names are case sensitive.
; nested exception is:
ORABPEL-12511
Adapter Framework unable to create outbound JCA connection.
http://127.0.0.1:9080/orainfra/wsil/adapters/applications/BAPI_COMPANYCODE_GETLIST_invoke.wsdl?wsdl BAPI_COMPANYCODE_GETLISTPortType::BAPI_COMPANYCODE_GETLIST(input_BAPI_COMPANYCODE_GETLIST,output_BAPI_COMPANYCODE_GETLIST) - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Adapter 'SAP' not available. Names are case sensitive.
Sincere thanks in advance.
Regards
sibendu

Dear Shiva & Others
I am still stuck up with J2CA repository config of SAP adapter. I have been able to successfully test JCA outbound service (request-response to SAP BAPI/IDOC) with BSE config only. Below are still problems, with J2CA config, if i create a outbound JCA request-response service, wsdl generation and everything is fine, but runtime when called thru BPEL partner link it gives below error in adapter log (still working on inbound jca service and getitng some problem there too which hopefully can be resolved).
Mon, 3 Aug 2009 19:41:28.0459 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [debug] [IWAF JCA] [container] ENTER AdapterManager.getActivatedAdapter(String adapter, String config)
Mon, 3 Aug 2009 19:41:28.0475 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [info ] [IWAF JCA] [container] [SAP.service_Blore] Created adapter instance for class'class com.ibi.sapr3.SapAdapter20'.
Mon, 3 Aug 2009 19:41:28.0475 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [info ] [IWAF JCA] [container] [SAP.service_Blore] SAP activate() : com.ibi.sapr3.SapAdapter20@568dbc
Mon, 3 Aug 2009 19:41:28.0475 IST - Thread[AJPRequestHandler-HTTPThreadGroup-56,5,HTTPThreadGroup] [error] [IWAF JCA] [container] [SAP.service_Blore] Problem activating adapter. (null). Check logs for more information
java.lang.NoClassDefFoundError
     at com.ibi.sap.SapAdapter20.bindToPool(SapAdapter20.java:484)
     at com.ibi.sap.SapAdapter20.activate(SapAdapter20.java:155)
     at com.iwaysoftware.af.container.adapter.ProxyAdapter.activate(ProxyAdapter.java:104)
Most strange to me is the NoClassDefFoundError, I have seen the code in SapAdapter20 and all dependencies are there in classpath, i have gradually added them to everywhere and now all the jars/dlss are present in system classpath, server classpath, <soahome>/opmn/lib, <soahome>/j2ee/<container>/lib and adapter directories :-)
I also get another exception at server startup, but assuming this has nothing to do with the above problem (and adapter works without the keystore config, please correct me if wrong), still would be nice to get rid of this as well.
java.lang.IllegalStateException: Problem loading keystore: java.io.FileNotFoundException: D:\SOASuite\adapters\application\config\base\security\keystore.jks (The system cannot find the file specified); make sure the password is correct
     at com.iwaysoftware.security.KeyStoreUtil.getKeyStore(KeyStoreUtil.java:41)
     at com.ibi.adapters.util.security.SecurityManagerImpl.<init>(SecurityManagerImpl.java:45)
Any help really greatly appreciated.
regards, sibendu

BizTalk 2010 - WCF-Custom Adapter with sqlbinding - rror was encountered while attempting to transmit the message

BizTalk 2010 RTM version with SQL 2008 R2 .
An intermittent issue with the WCF-Custom adapter with sqlbinding, calling a SQL stored proc as below
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit the message" .
Event log shows
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is suspended. Error details: Unknown Error Description
Any advice please. Thanks
Sullu.
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Hi Chen
Is there any update on this please ?
I have applied the latest CU and have noticed the following issue.
BizTalk 2010 Enterprise Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack works fine , no issues noticed.
However ,
On a DEV VM ,BizTalk 2010 Developer Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack still gives the error mentioned in this post.
In addition Microsoft BizTalk Adapter Pack ,Microsoft BizTalk Adapter Pack(x64) & WCF LOB Adapter SDK are also installed .
Below is the Error message.
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit
the message" .
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is
suspended. Error details:
Unknown Error Description
Could you please check and advice what needs to be done to resolve this ? Thanks .
Regards,
Sullu
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

WCF-SQL Adapter Set up

Hi,
I am using Microsoft Biztalk 2010 on Windows Server 2007(SP2). I am want to use WCF-SQL adapter but I am not able to see any adapter when I tried to create new adapter at "Platform Setting -> Adapter -> New Adapter dropdown.".
Windows Communication Foundation LOB Adapter SDK, Microsoft Biztalk Adapter Pack, Microsoft Biztalk Adapter Pack(x64) are installed on my machine.
Am I missing something? how to get the WCF-SQL in the list of adapter.
Thanks, Girish R. Patil.

Hi Girish,
Another area to check is machine.config file for binding entries.
check following for hint : http://tech-findings.blogspot.in/2013/06/no-valid-adapters-installed-on-machine.html
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

Biztalk sap adapter

i am in the process of designing an application where i take reads from biztalk rfid and send them to biztalk and by using the biztalk adapter for sap... send an idoc to sap...
i have biztalk installed and the the biztalk adapter pack 1.0 and WCF LOB Adapter SDK installed...i have sap client 7.1 installed...
i need the following from sap...i have no idea how to get them...i think i need to download the service manager but cannot quite figure out how...
u2022 librfc_32-20000972.sar
u2022 UCLIB_2-20000972.SAR
u2022 SAPCAR.EXE
please help!!!!

Hi,
Check these URLs for more clarification:
www.biztalkadapter.com
http://download.microsoft.com/download/d/0/e/d0ebe54b-fd4f-4563-b0a0-f66b2cf87dee/SAP_01_BizAdapter_Installation.ppt
Thanks,
Boopathi

The adapter "SQL" raised an error message. Details "Login timeout expired".

Hi All
Please help me to understand "Login timeout". All feedback is welcome.
BizTalk Server 2009 on Windows Server 2008 R2 64 bit
SQL Server 2008 SP1 64 bit
BizTalk Adapter Pack 2.0
Event Viewer -> Windows Logs -> Application
The adapter "SQL" raised an error message. Details "Login timeout expired".
The adapter failed to transmit message going to send port "ALL.Exceptions" with URL "SQL://xxxxxxxxx/EsbExceptionDb/". It will be retransmitted after the retry interval specified for this Send Port. Details:"Login timeout expired".
Regards
Steve

Hi Abhishek,
Thank you for your input.
I found errors in the Table [EsbExceptionDb].[dbo].[Fault] relating to the write to the target Oracle database
Microsoft.ServiceModel.Channels.Common.MetadataException: Metadata resolution failed for OperationId:ATHENA/Table/WO_ADDITIONAL/Delete ---> System.TimeoutException: Timeout Expired at
The BizTalk send port timeout has been increased from 1 minute to 30 minute and all is well
Regards
Steve

Adapter Pack 3.0

Similar Messages

Maybe you are looking for