Adapter scheduling in a perticular time frame

Hi Experts,
I have got a requirement that, The adapter should pickup the files from Source directory every day between 10AM -11AM. How to schedule the adapter?
Points will be awarded ..........
Thanks,
Manoj

Hi,
Follow this..
1. Go to Runtime Workbench -> Component Monitoring -> Communication Channel Monitoring
2. Locate the link Availability Time Planning on the top right corner of your Communication Channel Monitoring page.
3. In Availability Time Planning, choose the Availability time as daily and say create.
4. Provide the details like the time 1o:00
5. Select the communication channel, go to the Communication Channels tab and filter and add the respective channel (File Sender).
6. Once all the above has been done 'Save' the changes.
In addition have a look at the blog Adapter Scheduling - Hail SP 19 :-) By Shabarish Vijayakumar
Thanks
SaNv...

Similar Messages

FTP Adapter restrict polling frequency active time frame in a day

Hi All,
Is there anyway I can restrict FTP adapter polling frequency to be active during a particular time frame of the day. Say, my service should poll the incoming location for Sales order data for every hour during business hours of the day.
Thanks,
AG

Hi
SOA Suite 12c will expose Oracle ESS as the scheduler.
ESS will allow you to schedule soa composites / OSB services etcand allow you to enable / disable them based on jobs, which is what you desire.
12c SOA Suite is expected later this Summer.
Cheers
iain

Run steps in a chain at a specific time frame

I've got an ETL process running in a scheduler chain. First steps are extracting data from remote servers. Each remote server has it's own time frame in which I can extract the data. Once the window is closing I need to kill the job immediately.
My question is, Is it possible to define a time frame for single steps in a chain ?
Other options i'm considering (but all are less favorable)
Create a job with max_run_duration for each extraction step and manually time the transformation / load chain steps after. Advantage - simple, Disadvantage - A lot of ideal time.
Same as above but make the transformation / load chain with an event based job to when all extraction jobs are done. Advantage - Less ideal time, Disadvantage - More complex, error prune.
These two options requires a sniper job to catch JOB_OVER_MAX_DUR event and kill the job.These options also require breaking up the chain - something I would like to avoid. Another option that keeps the chain intact is
Defining the step rule with a time based condition (and using low evaluation_interval ~ 60 seconds) But then I cannot set max_run_duration and there for cannot stop the job if it's working when the time frame is closing.
I would appreciate any ideas on solving this problem.

Hello,
You can for instance execute the following when you create your Refresh Group:
BEGIN
DBMS_REFRESH.MAKE(
name => '"{color:red}schema{color}"."{color:red}refresh_group_name{color}"',
list => '',
next_date => TRUNC(SYSDATE) + 1 + 1/24,
interval => 'TRUNC(SYSDATE) + 1 + 1/24',
implicit_destroy => FALSE,
lax => FALSE,
job => 0,
rollback_seg => '{color:red}rollback_segment{color}',
push_deferred_rpc => TRUE,
refresh_after_errors => TRUE,
purge_option => NULL,
parallelism => NULL,
heap_size => NULL);
END;
/Then you add your MV to the Refresh Group as follow:
BEGIN
DBMS_REFRESH.ADD(
name => '"{color:red}schema{color}"."{color:red}refresh_group_name{color}"',
list => '"{color:red}schema{color}"."{color:red}MV_name{color}"',
lax => TRUE);
END;
NB: The syntax and option can change with the Release (this syntax is well tested on 8.1.7).
Hope it can help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Dec 16, 2009 9:04 AM

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

How to schedule a job occurring time for 1 1/2 hour in sql server

how to schedule a job occurring time for 1 1/2 hour in sql server

Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support

How can I execute a command every 10 seconds in a specific time-frame

Hello,
I would like to create a script which in a specific time-frame collects some outputs and also pings every 10 seconds.
To collect the outputs every minute from 22:00PM to 22:10PM I have the following:
event manager applet snmp_output
event timer cron cron-entry "0-10/1 22 * * *" maxrun 30
action 010 cli command "enable"
action 020 cli command "show clock"
action 030 cli command "terminal exec prompt timestamp"
action 040 cli command "show snmp stats oid | append bootdisk:show_snmp_stats_oid.txt "
action 045 wait 5
action 050 cli command "show snmp pending | append bootdisk:show_snmp_pending.txt "
action 055 wait 5
action 060 cli command "show snmp sessions | append bootdisk:show_snmp_sessions.txt "
acionn 065 wait 5
action 070 cli command "end"
To confirm connectivity to the device doing the SNMP polls I would like to execute a ping every 10 seconds in the same timeframe.
Cron seems only to support minutes. Is it possible to combine a watchdog timer + a cron timer?
Can this ping function be incorporated in the SNMP output applet or will I have to write a new one?
Will I need TCL here (I have no experience in TCL)?
Best regards,
Tim

If you wanted the pings to run in parallel, you could have this applet configure another applet to do the pinging, then remove it on the last run. This will require an amount of programmatic logic, though. If you wanted to keep things a bit simpler, add another applet that runs at 22:00 that configures a watchdog pinging applet, then a third applet that runs at 22:10 that removes the pinging applet.
When it comes to embedded quotes when you configure your nested pinging applet, you'll need to use $q to stand for the embedded quotes. You'll also need to configure:
event manager environment q "

Manuals users should not be able to submit a concurrent program at a specific time frame:

Hi
Please let me know is it possible to restrict some users to submit a Concurrent program during a selected time frame .
Eg we have an issue in which Process Lockboxes concurrent Program is submitted by the batch user and is also by the Users manually from Front end .What I want is that during a particular time frame everyday say from 12:00 AM to 6 PM I want to restrict manual users to submit this program ,whereas the Program can be submitted by the Batch user any time .
Please let me if its possible to achieve this and how .
Thanks
Rishabh

Please don't post duplicates -- restrict user to submit concurrent Program
Continue the discussion in your original post.
Thanks,
Hussein

HT1657 after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

What is the Maximum Data can a file adapter can send at a time.

Hi ,
What is the Maximum Data can a file adapter can send at a time.Is there any maximum limit data can adapters will send.
can any one help on this.
regrads
Raghu

Hi Reddy,
I have raised the same question and I got correct answer.
Refer the below thread which will give u information.
Wat is the maximu size of data XI can handle
Thnx
Chirag

Query to calculate time frames

hello,
id like to write a query that will calculate time frames ;
my source table looks like this:
company     category     date
ORACLE     A     1/01/2012
ORACLE     A     2/01/2012
ORACLE     B     3/01/2012
ORACLE     C     4/01/2012
IBM     A     1/01/2012
IBM     A     2/01/2012
IBM     A     3/01/2012
IBM     A     4/01/2012my desired result:
company     category     from     to
ORACLE     A     1/01/2012     2/01/2012
ORACLE     B     3/01/2012     3/01/2012
ORACLE     C     4/01/2012     31/12/2999
IBM     A     1/01/2012     31/12/2999can you please guide me with use of which functions i can achieve that?
id appreciate any tips
thank you
rgds
Edited by: UserMB on Jan 11, 2012 5:14 PM

One way...
ME_XE?with t as
2 (
3    select 'ORACLE' col1, 'A' col2, to_date('1/01/2012', 'dd/mm/yyyy') col3
4      from dual
5    union all
6    select 'ORACLE', 'A', to_date('2/01/2012', 'dd/mm/yyyy')
7      from dual
8    union all
9    select 'ORACLE', 'B', to_date('3/01/2012', 'dd/mm/yyyy')
10      from dual
11    union all
12    select 'ORACLE', 'C', to_date('4/01/2012', 'dd/mm/yyyy')
13      from dual
14    union all
15    select 'IBM', 'A', to_date('1/01/2012', 'dd/mm/yyyy')
16      from dual
17    union all
18    select 'IBM', 'A', to_date('2/01/2012', 'dd/mm/yyyy')
19      from dual
20    union all
21    select 'IBM', 'A', to_date('3/01/2012', 'dd/mm/yyyy')
22      from dual
23    union all
24    select 'IBM', 'A', to_date('4/01/2012', 'dd/mm/yyyy') from dual
25 )
26 select
27    col1, col2, min(col3), case when max(col3) = max_company_date then to_date('31/12/2999','dd/mm/yyyy') else max(col3) end
28 from
29 (
30    select col1, col2, col3, max(col3) over (partition by col1) as max_company_date
31    from t
32 )
33 group by col1, col2, max_company_date;
COL1               COL MIN(COL3)                  CASEWHENMAX(COL3)=MAX_COMP
ORACLE             B   03-JAN-2012 12 00:00       03-JAN-2012 12 00:00
ORACLE             A   01-JAN-2012 12 00:00       02-JAN-2012 12 00:00
ORACLE             C   04-JAN-2012 12 00:00       31-DEC-2999 12 00:00
IBM                A   01-JAN-2012 12 00:00       31-DEC-2999 12 00:00
4 rows selected.
Elapsed: 00:00:00.01
ME_XE?

CSM ret-code time-frame

A company I work for has a number of CSM modules (WS-X6066-SLB-APC) installed in 6513 chasis switches. The CSM modules are running version
4.2(14)
These CSM modules are configured to load-balance a number of vservers via serverfarms, each serverfarm containing multiple real servers.
Here is some example configuration:
vserver SITE
virtual 10.1.2.3 tcp www
serverfarm SERVERFARM
persistent rebalance
inservice
serverfarm SERVERFARM
nat server
no nat client
predictor leastconns
failaction reassign
retcode-map RETCODE-MAP
real 10.2.3.4
inservice
real 10.2.3.5
inservice
map RETCODE-MAP retcode
match protocol http retcode 503 503 action remove 5 reset 300
The company is facing a problem with what seems to be related to return code checking. Every once in a while a server will suddenly not receive any traffic for 5 minutes. This always occurs right after the server has sent a HTTP 503 return code. However we cannot see in the CSM logs that the CSM module has actually disabled the real server. For other serverfarms which are running regular HTTP and/or ICMP health checks to real servers we can clearly see in the CSM logs when a real server has been temporarily disabled due to health check failures.
The return code checking is set to disable a real server for 300 seconds after the CSM has received five HTTP 503 responses from the real server. If we check the real server log however we cannot find more than that single 503 return code right before the server stops seeing any incoming traffic unless we move back at least hours in time.
I have tried to figure out what time frame those 5 return codes must be received within for them to count towards the maximum allowed return codes, but nowhere in no documentation can I find any information about this time frame.
For all I know the CSM could keep track of every incoming 503 forever, until the maximum of five 503's is reached, and then the server is disabled for 300 seconds.
Does anyone have any information about the time frame within which those return codes must be received by the CSM to count toward the maximum configured number of return codes before the configured action is taken?

Hi Christopher
EDIT: It might actually be me who misunderstood your reply. You probably gave me the correct answer already, that there is no time limit at all to the counter, and the counter will increase until it reaches 5 even if those 503's are spread out over several months time. Could you please confirm that this is what you meant? I'll leave my original reply down below for you to look at.
ORIGINAL MESSAGE:
Thanks for your reply, but I think you might have misunderstood my question, and I don't exactly blame you because I had some difficulty explaining what I meant.
I know what each and every key word in the following line mean, and I understand the command.
match protocol http retcode 503 503 action remove 5 reset 300
We match the protocol http, and look for when/if the server sends a return code 503 back to a client. Each time a 503 return code is returned from the real server a counter is increased by one. When the counter reaches 5 we take the action to remove (disable) the server. 300 seconds after the server was disabled it will be enabled again, and the counter will also be reset to zero at this point.
But I'm asking about the time frame for the counter, or rather if there is a default timer that resets the counter back to zero after a certain amount of time. Let me give you an example.
I enable return code checking for HTTP 503 and configure it to disable a server after five HTTP 503's have been seen by the CSM
1 minute later the server sends three HTTP 503 messages to a client. Now the return code check counter is at 3. This is where the "time frame" that I speak of begins.
Another 6 minutes later the server sends one HTTP 503 message to a client. The time frame within wich the CSM has seen HTTP 503's is now 6 minutes, so the CSM has seen four different HTTP 503's within 6 minutes. The counter would now be at 4.
5 months later the server sends a fifth HTTP 503 message to a client. The time frame is now five months and six minutes. Will this fifth HTTP 503 message increase the return code check counter to 5? If it does, then the server will be disabled for 300 seconds, even though it was 5 months since the previous four 503's were seen by the CSM.
What I'm wondering is basically if there is a limited time frame (like a sliding window) after which the return code check counter is reset back to zero? I cannot find any information about this, and as far as I can see there is no command I can use to see what the return code counter is currently at either, so I cannot manually verify this.
It would have made sense if the feature worked like this instead, and I'm still hoping that someone can provide documentation that says this is the way it is supposed to work (because if the above example is true, then the feature is broken and useless)
I enable return code checking for HTTP 503 and configure it to disable a server after five HTTP 503's have been seen by the CSM
1 minute later the server sends three HTTP 503 messages to a client. Now the return code check counter is at 3. This is where the "time frame" that I speak of begins.
5 minutes later the counter is reset to zero, because no 503's have been seen for over five minutes.
2 months later the server sends a HTTP 503 message to a client. This increases the counter to one. The server is never disabled. After another 5 minutes the counter is reset back to zero again.
I hope that the above examples make it a bit clearer what I meant with my original question.

How do i set the time frame of a waveform chart programmatically to be a 30 sec window or a 24 hour window

i'm using LV7.0 and what i need to do is to be able to set the time frame or range of a waveform chart programmatically before i start taking and plotting data. sometimes this window needs to be 30s wide and sometimes it needs to be 24 hrs wide. (in the first reference, i need the chart to fill up with 30s of historical data then the whole chart scrolls with each new data point). the data acquisition records data at a rate of once per second. i've tried to use the chart properties of XScale.offset, XScale.Range.Minimum and XScale.Range.Maximum but no matter what i do the time-stamp on the x-axis is always "00:00:00 PM" and "MM/DD/YYYY" even though values are seen being plotted on the right side of the chart as expected.
Attachments:
BX0265 ShelfLife DAQmx.vi ‏120 KB

Okay, there seems to be some confusion here -- the X axis values are of type double, but they can be represented in the HH:MMS MMD:YYYY format if you want in which case it interprets the floating point as the number of seconds since 6pm Dec 31, 1903.
You can programmatically set this value using the XScale.Minimum and XScale.Maximum properties, but note that if you wire a waveform to the chart after setting these values the t0 parameter will override what you set using the property node for XScale.Minimum. If instead you leave the t0 parameter empty you can use the XScale.Offset property and wire the same value in that you wire to XScale.Minimum. Changing the amount you add to XScale.Minmum to obtain what you wire into XScale.Maximum will determine the time window size.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

Scheduled Tasks - System Idle Timer

I recently upgraded to Windows 8.1. Unfortunately, my NIC prevents the system from automatically entering Hibernate (if I disable/unplug it the system sleeps properly). To work around this, I thought I would use a Scheduled Task to run shutdown /h after
x minutes of inactivity (probably an hour).
I set my task's trigger to be an hourly check indefinitely.
I set the action to be shutdown /h
I set the conditions to be:
Start the task only if the computer is idle for: 1 hour (checked)
Wait for idle for: Do not wait
The problem I have found is that the task runs if the computer has been idle for only four minutes as per the Task Idle Conditions states (http://msdn.microsoft.com/en-us/library/windows/desktop/aa383561%28v=vs.85%29.aspx). In my mind I should leave the
computer alone, the hour ticks over and the task is initiated. It should then check to see how long the system has been idle for:
>= 1 hour? Run the task
< 1 hour? Do nothing until the next hour
What seems to be happening is it is checking for an idle state and running the task, even if the computer has only been idle for the minimum four minutes.
Has anyone else found this issue? Are there any ideas on how I can fix this? My next idea is to write a batch file to sleep for an hour and then hibernate and to have the task cancel the batch process when the system is no longer idle. Seems like it could
work.
Thanks in advance.

Hi vdboots. The question is regarding Task Scheduling and the idle timer, not the issues my system has with hibernating automatically.
To answer your query, yes I have disabled all devices from waking the computer. The Microsoft drivers for my NIC for some reason keeps the machine awake. I installed the manufacturer's Windows 7 drivers (of course they didn't release any Windows 8 ones...)
and the machine would sometimes enter hibernation, but mostly would just stay on. The only way I could get the computer to automatically hibernate was to disable the NIC altogether, but that is hardly a solution.
As I said, this question is about why Windows doesn't seem to be waiting for 1 hour idle time before initiating the task. The action of the task is fairly irrelevant, in fact for my testing I just launch cmd and run time /t.

SCSM 2012 Change form issue - Scheduled start and end times default to 12:00:00

I have a report that the Change Form in SCSM 2012 is not allowing users to set the scheduled start and end times. The date stays correct, but the time reverts back to 12:00:00, and the user has to save to the initial form, then re-open and
change the times.
I checked in the authoring tool, the time/date field is set to full date and time. (I think these are custom fields)
I am not sure where else to look to adjust any settings as needed.
Thanks for any assistance.
Joshua Fuente

Hi Joshua,
Is this situation on all consoles or few ones? Check the time format on the user's PC. 24h or 12h could affect the DateTime control's behavior.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Facebook:

Any time frame for when we will be getting the Android 5.0 upgrade on the Verizon G3?Type your question

Any time frame for when we will be getting the Android 5.0 upgrade to the G3 on Verizon?

No one from Verizon can or will give you a timeline. They have no idea. Verizon can't even test 5.0 until they get it from LG first so perhaps you should be asking them.

Adapter scheduling in a perticular time frame

Similar Messages

Maybe you are looking for