ADAPTER STATUS
where to check the adapter status..whetther it is active or inactive....
Hi Chandra,
In ID---open Communication channel
In the Advanced TAB-----check the Status
And also we can check the CC Active or in RWB
RWB---Compo miniAdapter Engine-CC moni---Select the CC.
There we can see the status of the CC whether it is started or Stopped.If it stopped means we can start it by pressing the start
Regards
Seshagiri
Edited by: N V Seshagiri on Apr 17, 2008 8:32 AM
Similar Messages
-
Dynamic File Adapter status - Active or Inactive
Hi Experts
Is there any way to set the Sender/ Receiver File adapter status dynamically to inactive or active.
Is there any setting exists in the file adapters ? Please provide me possible solutions.
Thanks
FaheemHi all,
Many thnz for the response.
There is one more way of doing this as well. Just now i found that.
In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
there are options for our comm channel to run specfic date and time.
Thnz
Faheem -
Deleting old messages problem (adapter status 001)
Hi,
I am trying to delete old messages, and some of them are staying in system. Here is the result of 'RSXMB_SHOW_STATUS' report:
Message Status
Message Status: 003 Number: 85.274
Adapter Status of Messages with Message Status: 003
Adapter Status: 000 Number: 4.040
Adapter Status: 001 Number: 74.290
Adapter Status: 002 Number: 0
Adapter Status: 003 Number: 0
Adapter Status: 004 Number: 0
Adapter Status: 005 Number: 0
Adapter Status: 006 Number: 4.806
Adapter Status: 007 Number: 2.122
Adapter Status: 008 Number: 6
Adapter Status: 009 Number: 0
Adapter Status: 010 Number: 0
Adapter Status > 010 Number: 0
So, there is 74.290 messages whith 001 status in adapter. Archieve and delete jobs don't want to delete them, and status isn't going to change. Refreshing adapter status did help with most of messages but 74.290 is what still there after refresh. Any ideas how to bring them to final state or may be its possible delete them in this state?Hi,
Above Messages are related to your IDoc and BPM related interfaces...
so you need to schedule a report which does the deletion of the same...
Check the reports scheduled are running or not...
I dont remeber the reports which does the job of changing the status...
HTH
Rajesh -
Adapter status determination by program
Dear all,
Is there any possibility to determine an adapter status by a program?
I mean, if there is any API, or BAPI, or RFC, or tables, whatever, to read into an ABAP program the adapter status - specifically the informations which are displayed on the corresponding Runtime Workbench page (active/inactive/stopped, perhaps the status of last processed messages).
The ABAP cache holds all the adapters (definitions), but no dynamic status, so it's useless. The message table does not contain any information about the adapter, so it's useless too.
The ideal would be to retrieve such data into an ABAP program, but any other help would also be useful.Hi
These table contains XI information, might help u
Interesting ABAP tables in XI Part I -
CRM Middleware Monitoring: Adapter Status Information. Waiting Objects
Hello
I am having a problem sending messages of type RSREQUST from CRM to BW
I have been seeing in the SMWP transaction that we have waiting objects in Request Status of Adapter Status Information.
I dont know how I can start it or solve this error
Thanks in advanced
Best regardsHi,
It seems that the maximum number of parallel processing threads(usually 5) have been set in ur system which is why the objects are in status WAIT. Status WAIT is not an error. To correct, would you check the transaction R3Ar3 for all requests tht are in running status. If you have 5 requests here, abort one or two out of them. Then go to SMQ2 and select the queue tht is in status WAIT. Unlock the queue immediately. It should change to status "READY" and should flow across to BW.
Reward points if it helps !!
Rgds
Priyanka Bansal -
What is the URL to display the adapter status in xi
Hello Guru's
Can any one tell me the URL used to display the adapter status.
at the same time give the URL's for all the components of the xi.
and where do i can see the messages( message types and message interfaces ) in my xi installed system.
Thanks in advance.Adapter status: http://<server>:<port>/mdt/amtServlet
Components:
Repository: http://<server>:<port>/rep/start/repository.jnlp
Directory: http://<server>:<port>/dir/start/directory.jnlp
RWB: http://<server>:<port>/rwb/index.jsp
You create the message structures in your Repository. -
Hi All,
Is it possible to see the proxy adapter status somewhere in RWB or ABAP stack
ThanksYes, if you made the correct settings in the proxy he will serf-register him self in to the SLD and into the Domain and you will see the status of if from the component monitor of RWB
Refere to offical docu:
http://help.sap.com/saphelp_nw04s/helpdata/en/3e/e3fb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/5e/f85141196ff423e10000000a155106/content.htm
Regards,
Sandro -
I'm in the processing using this API to retrieve adapter status. I'm on SP17. Has anyone worked on it and if so, how does the code look like. Do we first connect to the desired XI box and call this api, directly. Any help appreciated.
Thank you.Hi,
Please check servlet:
<host>:<port>/mdt/amtServlet
But how to get the code of it I don't know.
Regards,
Wojciech -
RSXMB_SHOW_STATUS Adapter Status 000
Hello All,
We were running the report RSXMB_SHOW_STATUS and we are currently seeing 130,000 messages with Adapter Status 000 which actually means "Messages not scheduled yet on the outbound side". How do we handle these messages ? Do they get cleared on its own or do we have to go ahead and delete them and if so which report do we run to delete these messages ?
Thanks,
KiranYou can check the other messages statuses by running the following reports (using SA38 transaction):
RSXMB_SHOW_STATUS
RSXMB_SHOW_REORG_STATUS
This should give you a clue on every message on persistence layer, to take the next steps according to the OSS note below
[813993 - FAQ: Message status in the adapter framework|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=813993] -
Adapter Status Error : Error in creating message ID map for JMS message:
Currently in the SAP XI 3.0 JMS Adapter, I am receiving the following error
Error in creating message ID map for JMS message:
ie. Error while processing message 'de8265f6-c864-4479-1137-9bab17b78b3b'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in creating message ID map for JMS message: ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:103)
Although I am receivng this error, when I check the details of the message processing, all steps are successful and the message is set to status : DLVD
Audit Log for Message: de8265f6-c864-4479-1137-9bab17b78b3b
Time Stamp Status Description
09.06.2009 13:27:24 Success New JMS message with JMS message ID ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 received. The XI message ID for this message is de8265f6-c864-4479-1137-9bab17b78b3b
09.06.2009 13:27:24 Success JMS message converted to XI message format successfully
09.06.2009 13:27:24 Success RRB: entering RequestResponseBean
09.06.2009 13:27:24 Success RRB: suspending the transaction
09.06.2009 13:27:24 Success RRB: passing through ...
09.06.2009 13:27:24 Success RRB: leaving RequestResponseBean
09.06.2009 13:27:24 Success Transform: using Transform.Class: com.sap.aii.messaging.adapter.Conversion
09.06.2009 13:27:24 Success Transform: transforming the payload ...
09.06.2009 13:27:24 Success Transform: successfully transformed
09.06.2009 13:27:24 Success Application attempting to send an XI message synchronously using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:24 Success Trying to put the message into the call queue.
09.06.2009 13:27:24 Success Message successfully put into the queue.
09.06.2009 13:27:24 Success The message was successfully retrieved from the call queue.
09.06.2009 13:27:24 Success The message status set to DLNG.
09.06.2009 13:27:25 Success The application sent the message synchronously using connection JMS_http://sap.com/xi/XI/System. Returning to application.
09.06.2009 13:27:25 Success The message was successfully transmitted to endpoint http://sapxia.swets.nl:8000/sap/xi/engine?type=entry using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:25 Success The message status set to DLVD.
Not sure why this is occurring.......No, not using correlation id.
I was able to resolve the issue on this queue by changing the following setting
Under the PROCESSING tab, under XI SETTINGS
Time period for Duplicate Check for EO(IO) (secs) it was set to 86400
I have changed this to 300 seconds and the adapter has now gone green.
BUT......
That said, I have the exact scenario on another sender JMS channel set to 300 seconds and it exhibits the same issue.
correlation settings:
Set XI message id to = GUID
Set Xi conversation -
SOAP Adapter status stay "Channel started but inactive"
Hi, Folks:
We have a couple of SOAP adapters that I have not used for a while, so I put them in inactive status.
Now we need to switch SOAP Scenario, I activate them, however, in Communication Monitoring Page, The status is Yellow Triangle: "Channel started but inactive"
I have tried to inactivate and reactivate them for a couple of times, it does not help.
Any ideas are welcomed !
LiangHi Guys
As suggested by you guys, after I sent first message, all the SOAP adapter get active now. I believe I fogort how I setup it up initially. That is the value stay with your guy
Thanks everyone !
Liang
Edited by: Liang Ji on Feb 29, 2008 8:48 PM -
Adapter Status Grey and Cache Error in acessing Integration Directory
Dear All
While going through the following path
RWB-->Component Monitoring->Adapter Engine->Cache Connectivity Test
i got the following result
" Cache notification from Integration Repository failedError when accessing the Integration Directory "
RWB-->Component Monitoring->Adapter Engine->Adapter Monitoring
I am able to see the list of all adapters but all the adapters have Gery light status instead of having a red or green light status
Kindly tell me what to do...how to change the grey light status to green light and how to set the Cache right
and going by the following path
Thanks in anticipation
Chakra and SomnathHi Somnath,
Check out this link for cache Connectivity:
How To handle Caches in SAP XI 3.0
https://websmp206.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Cheers,
Vijay Raheja -
Hi
In file adapter i changed Server Details, after that i saved it and activated,
in configuration it showing status as active, but in RWB in adapter monitoring
it showing status as inactive(gray colour), pls tell me, how can i change it into green colour?Surya,
In which SP u are currently working in. Coz if u are in SP18 and above(I believe) there is option in RWB communication channel monitoring instead of adapter monitoring. If you have comm.channel monitoring option then there is option of making particular comm.channel active and inactive over there. Kindly make it active over there.
Hope it helps.
Best regards,
raj. -
[Solved?] No adapter status changes, or battery readings, in DEs
Update: by some magic, probably a relevant package upgrade, it began to work as it should as of my last login.
I have a Thinkpad R60. Battery meters for XFCE, KDE, and Gnome show the battery at 100%, with the AC adapter plugged in, regardless of whether it is plugged in or not, and even when the computer is beeping and blinking to warn that the battery is nearly exhausted.
cat /sys/class/power_supply/AC/online
returns the correct status for the AC adapter.
Last edited by Pancake_Palace (2012-07-31 06:55:29)No, I mean that if I unplug the AC adappter from the computer, the computer itself, independently of the OS, acts like it should, beeping and dimming, and then much later, warning that the battery is getting too low. The battery meter applets, however, never notice that it has been unplugged, nor do they update the charge status. As far as they are concerned, it it is still plugged in, with a full battery.
Being able to get the changed value from cat /sys/class/power_supply/AC/online, clearly, the event is being seen by the OS, but not by whatever the DE meters use, which also seems to make AC/batt settings made in them ineffective.
Also, I now have seen that if I boot up with a discharged battery, they will state the charge and time needed to complete charging. If I start up with no AC adapter plugged in, I get the expexted opposite behavior from in the OP: thye think it is running on battery, even after being plugged in. -
When RFC-Adapter is down, only the adapter-status shows error flag
Hi all,
How can I reprocess a message that did not reach the endpoint because the rfc-adapter was down, if the overall status of the message is "Message Processed"?
Thaks,
NunoHi,
The question is about receiver RFC adapter and not about the sender RFC adapter. So single / mass re-start from SM58 won't help (Report RSQIWKEX for q-RFC and report RSARFCEX for t-RFC).
If RFC adapter is down, message won't reach to the destination system via adapter engine. IE monitoring will say that message is successfully processed (so report RSXMB_RESTART_MESSAGES will not help) . In this case, if you go to adapter engine monitoring from RWB, you will be able to see the status Waiting or System error.
I'm not sure how to re-start this message, but probably you can do this through MDT.
May be SAP note - 813993 will help you.
Good Luck & Bapu, Jalasa Kar........
Maybe you are looking for
-
I wish to set up an alias address on my iPad. My iCloud address has already been established and I can find no way to get into my account to add any alias.
-
I keep my iTunes folder on my C drive on my old laptop but my iTunes Media folder is on my D drive (separate physical drive). I have purchased a new laptop with a single drive, (C drive) however, I can no longer access my old laptop's C drive to tran
-
Preference panel corruption?
I have a small, annoying problem in my system preferences. I just noticed that the speech panel is corrupted in some way, and I wonder if anyone has any tips on how to either reinstall it or to fix it. I can click on it like normal, and it opens up t
-
how can I synchronize my iphone calendar with my Windows Live Mail or my Google Calendar? I would like to be able to view entries from my iphone on my calendar as well as entries from my computer calendar on my iphone.
-
When I send or receive an email the date, to, from and subject line are fine but after that there is all of this encrypted information that is listed. I do not know what this information is called, how this information started showing up, I do not wa