Adapter to use Olympus Micro 4/3 lens on the EOS M?

Does anyone know if there is an adapter to use Olympus Micro 4/3 Lenses on the EOS M? I have the EPL 3 with several lenses and I like the Canon better for walk around shooting.

No, it would be impossible to make such an adapter.
The image sensor on a 4/3 camera is much smaller than on a APS-C camera like the EOS M. The 4/3 lens would not be able to project an image large enough to fill the entire sensor on a bigger camera.
Another thing to consider is that even though your EF-M lenses are APS-C, they will never work on an EF-S camera because the flange-to-focal-plane distance is shorter with mirror-less cameras like the EOS M.
Mike Sowsun
S110, SL1, 5D Mk III

Similar Messages

AT300SE - Connect to TV using MHL micro usb to hdmi adapt

Hi,
I recently received the Toshiba Tablet AT300SE. This newer tablet no longer has the HMDI connection port. However it has the micro USB. My question is, can I use this micro USB to connect to my TV using the micro a USB to HDMI adapter?
Has anyone ever done this and made it work?
Thanks,
Nick

Here an interesting info from Toshiba:
+Do the AT100, AT200, AT270, AT300 and AT300SE tablets support Mobile High-Definition Link (MHL)?+
http://aps2.toshiba-tro.de/kb0/FAQ3103FV0000R01.htm
The AT100, AT200, AT270, AT300 and AT300SE tablets *do not* support Mobile High-Definition Link (MHL).

I want an iPhone 3gs as I currently have a nokia lumia 620 but can I use my micro sim in the 3gs

Hi i want an iPhone 3gs but can i use my micro sim or do i need a sim adapter? answer soon

The iPhone 3GS takes a standard full-size SIM. It's possible that an adapter will work, but it will probably be more reliable if you get a full-size SIM from yur cell carrier.
EDIT: I concur with Tim. The 3GS is a very old model now, as smartphones go, so I would suggest a newer model, saving up if you have to. I myself wouldn't buy anything older than an iPhone 4S at this point.
Regards.

Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck.

Can I use a schema with no targetnamespace with the file adapter?

I am loading a file using a file adapter configured to use an xsd from a third party, the third party controls the xsd and incoming xml and does not have a targetnamespace defined in the xsd or xml.
When I define a file adapter for it the wizard indicates that I need to fix the xsd by adding a namespace. I dont have control over the xsd or xml as they are an external party.
I think I can hand edit the wsdl and change the import statement that requires a namespace to an include statement with no namespace.
Have you run into this before? Will that work?
Thanks,
John

Hi John,
Did we get any solution for this ?
Even in our case, the third party controls the xsd & incoming xml message. Both does not have a targetnamespace defined. The file adapter wizard indicates that we need to fix the xsd by adding a namespace. As a workaround, we manually added the target namespace to xsd and created file adapater. Now the question is how do we automatically add the name space in xml message as well, so that it can be parsed by BPEL process
thanks
Yj

White lines generateds in a File Adapter when using variable substitution.

Hi all,
I have been a problem in File generated by XI, my File Adapter is using variable substitution with reference to a field of my message type. Because it, the files generated has white lines in top of file.
What can I do to not apears these lines ?
Thanks

Regis,
Try to give a more detailed description of your problem otherwise I don't know who's gonna answer...
Alexx

Getting error in File adapter while using ChunkSize

Hi,
I am trying to move a large file using the ChunkSize property of the file adapter as shown below. However I am getting the error during the run time in the SOA server.
Code used:
<adapter-config name="SyncReadFile" adapter="File Adapter" wsdlLocation="SyncReadFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="SynchRead_ptt" operation="SynchRead">
    <interaction-spec className="oracle.tip.adapter.file.outbound.FileIoInteractionSpec">
      <property name="DeleteFile" value="true"/>
      <property name="PhysicalDirectory" value="C:\JDeveloper\mywork\JCAPs\ChunkFileRead\Input"/>
      <property name="FileName" value="overwriteme.txt"/>
      <property name="ChunkSize" value="55"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>
Error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileIoInteractionSpec due to: Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setChunkSize is not defined for oracle.tip.adapter.file.outbound.FileIoInteractionSpec Please verify the spelling of the property. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Please suggest a resolution to this. I am using Jdeveloper 11.1.1.7.0

Thank Daniel for the reply.
But what is the impact user messaging service has here. Can it happen that my oracle.tip.adapter.file.outbound.FileIoInteractionSpec is corrupted?
Thanks
Santanu

I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions? Thanks

I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?

What do you mean by "HD to VGA adapter converter"?
Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work

Need Dynamic attributes for XI adapter to use in Dynamic Configuration ..!!

Hi Friends,
We are planning send message to different receivers through XI adapter by using Dynamic Configuration.
Can anyone please tell me what are the dynamic attributes used for XI adapter.
In my scenario, I want to pass the Service Number and Path prefix of XI adpater dynamically by using sender ID from Idoc payload.
I know how to use the dynamic configuration UDF in message mapping. But I don't know the dynamic attributes which we can pass to Service Number and Path prefix of XI adpater.
Kindly suggest ..
Thanks
Deepthi.

Hi Sourabh,
>> You need to set these attributes explicitly in the adapter configuration..
Can you please elaborate on this like how to implement this? Do we need to use any module configuration in the adapter?
We will use XI adapter only while sending the data directly from IE without using any feautures of AE (like adapters, modules etc). It is like directly sending data from ABAP stack without using J2EE stack. That is the reason we can't use any Modules in XI adpater and it is in disabled by default.
When I checked in SXMB_MONI.. as you said details are found in
- <SAP:Attribute>
<SAP:Name>host</SAP:Name>
<SAP:Value>10.190.25.16</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>httpDestination</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>path</SAP:Name>
<SAP:Value>/rcvA/receiver</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value>8210</SAP:Value>
</SAP:Attribute>
XI adapter uses mainly three parameters Host, Port and Path.
I want to pass any two of these values dynamically to achieve my solution. Can you please suggest your solution how we can implement it.
-Deepthi.

PI 7.0: Error when calling an adapter by using communication channel

Hello Experts,
We have a mapping scenario for ERP -> PI -> web service. Few details from ERP will be sent via PI to Web service.
Once the web service authenticates, token and sign will be generated. Here an RFC adapter is used for configuring the RFC receiver communication channel and provided the ERP system logon details at the RFC client parameter.
An error is received as mentioned below.
Error while lookup Exception during processing the payload.Problem when calling an adapter by using communication channel CC_Rcvr_RFC_Lookup_TokenSign (Party: , Service: BS_QV6_700, Object ID: 54e904ebf3d7382a84a0f83cd292b810)
XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>'. com.sap.aii.mapping.lookup.LookupException
The logon details in RFC parameter are corrected. Re-activated the the communication channel and refreshed the cache.
But still the error is not resolved.Please let me know if there is anything else i need to check.
Thanks in advance.
Regards,
Sri

Hello,
You could also check note 730870 FAQ XI 3.0/ PI 7.0/ PI 7.1 RFC Adapter
Q 16:
While sending a message to the RfcAdapter the error "...functiontemplate from repository was <null>" is shown. Which reasons are possible?
Regards,
Sarah

Dynamically pass subject via mail adapter without using mail package

Hi,
We have requirement to pass the Dynamic variable as Mail subject
we can't use Mail Package as we need to capture the data from Dynamic SOAP header Data from incomming channel
Dynamic SOAP Header variable (XHeaderName1) comming from Sender SOAP channel.
Receiver side we need to capture that XHeaderName1 in Mail Adapter channel using ASMA and Variable transport binding so that value of XHeaderName1 should overwrite Subject under General/ Mail Atribute section.
Could you please let me know, how to handle this requirement using module configuration?
Also suggest the correct configuration to use ASMA and Variable transport binding.
Regards
Venky

Hi Venky,
Please have a look at the links below. They should help you.
Configuring the Sender SOAP Adapter- https://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
Configuring the Receiver Mail Adapter-https://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
Adapter-Specific Message Attributes in the Message Header -https://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
Regards,
Jannus Botha

I got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage so i want to know the steps u take to activate the micro sim in the ipad .

i got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage as i dont have wifi in the place tat i am staying so i want to know the steps involed to activate the micro sim in my ipad.

What roaming charges? If you have a local plan there are no roaming charges. This is a major reason for using a local plan.
Contact, or visit the website, whatever local provider you are considering and get their plan details.

Can HTTP Receiver adapter be used for Sync Comm. Pls advice urgent

Hi All,
I have some data present in XI.
I need to send the data present in XI to System A through HTTP adapter in synchronous manner means that system should send response back to XI.
Can HTTP Receiver adapter be used for Sync Commumication in my scenario.
Please send blogs/link for it
Regards

Hi Henry,
>>I have some data present in XI.
In what form it is available on XI(e.g., IDOC or RFC or File etc..)?
First let us know this.
Thanks,
Gujjeti

What adapter to use to hook up CINTIQ 21UX to MACBOOK PRO ?

What adapter to use to hook up CINTIQ 21UX to MACBOOK PRO ? Where can i get a good quality one and which dvi model

if you have the latest MBP with miniDisplayPort or Thunderbolt, you will need to get this adapter in addition to one of these dvi or vga cords (I would go dvi) DVI-I, VGA, DVI-D (dvi-i being the optimal one)
http://store.apple.com/us/product/MB570Z/A

HT4341 which adapter is used in Israel?

which adapter is used in Israel? when reffering to world adapter kit?

Isreal use "H" type socket.
http://holytourist.blogsome.com/2008/07/14/electrical-power/
http://www.adaptelec.com/index.php?main_page=document_general_info&products_id=3 15

Adapter to use Olympus Micro 4/3 lens on the EOS M?

Similar Messages

Maybe you are looking for