Adapter type missing - very urgent

Hi all,
We have installed PI 7.0, SP12. when we click on the adapter type in the integration directory - the window is empty. we have a central SLD which is solution manager. we have imported the sap basis content 7.0 and 7.1.. is there any other configuration that has to be checked
Very urgent
Regards
Arun
Message was edited by:
Arunkumar sukumar

When i check in the RWB, the adapter monitor shows an error in
---> Adapter Engine MXD (mbixidev)
http://sap.com/xi/XI/System
JPR - this shows an error in it and says -
SLD access SLD host:port = 10.10.40.197:50000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for MXD.SystemHome.mbixidev found
No access to get JPR configuration
Regards
Arun

Similar Messages

Adapter Type Missing

Hi All,
Can anyone say me why I can't select adapter type in a communication channel???
Thanks a lot

Hi Albert.
Trye reimporting your SWCV SAP BASIS 6.40 if netweaver 2004 or SAP BASIS 7.00 if netweaver 2004s.
If doing this, you don't have the adapters, is because *.tpz files that contain definitions and SAP demos is not availbale. Ask your BASIS team to put the necessary files into correct folders so you can import them and have adapters.
Regards,
Inigo.
Hola Albert.
No tienes los adaptadores porque es posible que falten unos ficheros *.tpz en los servidores que contienen las definiciones. Para comprobar esto, reimporta los SWCV SAP BASIS 6.40 o SAP BASIS 7.00 si estas en NW 2004 o 2004s.
Si despues de hacer esto sigues sin ver los adaptadores, es definitivamente porque faltan los ficheros. Diles a los de sistemas que busquen la nota OSS donde les explica bien clarito qué hacer.
Ahora te busco la nota y me das los puntitos, jejje
Saludos,
Inigo

Re: Transport Request Missing Very Urgent

Hi Peers,
One of my transport request is missing. I had configured in Dev client and the same configuration has been transported to Sandbox, because of Abap programs.
All the configuration which is there in Dev has been copied to Sandbox & I am able to see all my config.
Now in Testing also all my requests has been copied from Dev. But One particular request is missing and I dont remember the request name & number.
I have checked in SE10 also but No Luck not found my request.
Kindly requesting all of you to immediately give your valuable inputs.
Regards
Pavani

Hi Ruchit,
Thanks for the immediate response.
I had gone to SE03 but not able to find out PGMID & Object type & name????
I am a functional consultant so does not know about these terminology, can you tell me in detail vt needs to be done? My only worry is I had created some 1200 positions in that particular request. If I did not find out again I have to redo the same.
Can you please kindly help me out what needs to be done?????????
Regards
Pavani

How to Activate a Condition Type in the Tax OCde for A/P -- Very Urgent

Hi Peers
I'm creating a new Tax Code in T.Code FTXP, while creating, One Condition Type is Deactivated, say JM01, How to activate that condition Type. I know how to activate the Condition Type in A/R side but I want to know it in A/P side. Plz help. Its very urgent.
Regards
Rajaram

Hi Rajaram,
U pls Check ur configuration. First u check the calculation procedure (F.A- Tax on sales & purchase-Basic setting-Check calculation procedure _ Define procedure) In the procedure field u check JM01 is activated or deactivated otherwise u created in condition Type.
I think its usefull otherwise u let me know
Thanks
R.Manigandan

Very urgent, vendor down payment clearing - ka doc type

hello gurus,
while clearing vendor down payment, some down payment entries are posted as ka doc type. now i have to clear the invoice down payment with the ka doc type. how to do this.
for retention account we booked in special G now that retention money also paid but that doc is not showing as cleared. still it showing in red colour. but balance is nill. what to do for this..
can anybody help me very urgent friends
thanks
jaya

HI ,
CHECK THI SPROCEDURE ,
DOWN PAYMENT;
Vendor A/C--a DR1
TO Bank
Invoice;
Expence a/c dr
to Vendor----
2
down payment clear:
Vendor A/C-----Adr -
3
to Vendor a/c----4.
Hi once you do the Down payment clearing only 1 & 3 line items will be cleared.
but 2&4 line items will show as open items .
This line items you have to clear .Clear this in F-44.
CHANDRA

HT201317 I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

Photo stream only keeps photos in iCloud for 30 days, even though up to 1000 photos will remain on your device until you delete them (such as by restoring your phone). When you turned on photo stream again you only got back the photos added in the last 30 days as the others have already been removed.
If the missing photos were still in your camera roll when you last backed up, restoring the backup should recover them. (The backup includes camera roll photos but not photo stream photos.)

How to test Scenario with AS2 adapter..!!!Very Very Urgent..!!

Hi All,
We have provided the partner details like AS2ID,URL,Port and certificates.
They ask me to do some sample testing whether files are reaching to partner system or not.
I done all the required steps in IR and ID...
1. Can anyone suggest me how to do the testing
2. Where to monitor for AS2 messges?
3. How to see the our output files whether we are sending the correct files or not?
4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
5. Inbound-- How we will come to know whether file has sent to us or not?
Someone pls explain step by step how to do the testing using AS2 adapters for both Outbound and Inbound.
Its Very Very urgent.
Waiting for your replys..
Regards
Deepthi.

Hi Deepthi,
1. Can anyone suggest me how to do the testing
A) Like message monitoring in RWB we have a particular link to monitor the message through differnt seeburger adapter.
I dont remember the link right now.
2. Where to monitor for AS2 messges?
A) Through the same link.
3. How to see the our output files whether we are sending the correct files or not?
A) u mean to check the output file data or strucutre if strucutre is not proper then u will get the error message and ur mapping fails.
4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
I have no idea.
5. Inbound-- How we will come to know whether file has sent to us or not?
File is sent over wan so when it will be pickd up by XI.
Thnx
Chirag

No Adapter Types in Comm. Channels -- Urgent Pls

Guyz,
I'm a newbie and when i'm trying to follow a 'how to sample idoc' scenario doc, i tried creating a communication channel...even i tried using creating comm. channels with wizard, but i got a wierd error as follows :
"com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata IDoc .......from application REPOSITORY failed......." ...and a very huge java exception.....
later after i did a bit of searching over this forum and sap help, i found a document on marketplace detailing the tests to check our XI system is ready or not (doc name is Readiness_Check_Version3.pdf)... as suspected one of the test for adapters failed....In Adapter Monitoring section of Runtime Workbench, i'm not able to see any adapters other than JPR ...... which is why i suppose no F4 is turning up for adapter type in communication channel....
further more searching on this forum, showed me some hints for downloading XI Content from marketplace to update IR.....Firstly i'm not sure this is the solution, if it is, what all components needs to be downloaded.... can i just download SAP_BASIS 7.00 ? in my system i even have 'SAP BASIS 7.10'.... 'm in utter confusion....
appreciate a quick reply on this with details (pls let me know how to check which SP level is my XI system is installed ? , if i have to download XI Content from mkt place).
thanks a ton in advance
Sreedhar K

Hi,
Can you please check this steps:
a) Reimport the latest version of the SAP Basis Software Component into the Integration Repository. The adapter metadata is contained in that SWC, under the namespace http://sap.com/xi/XI/System
b) Just try with Visual Administrator to check the services for the adapter engine are running or not. All services starts with SAP XI..
SAP XI AF Core
SAP XI AF CPA Cache
SAP XI AF Messaging
SAP XI Adapter XI
SAP XI AF Security
c) Just go thru following link from service.sap.com
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
d) In the last Refresh the cache of the Adapter Engine.
1) sxi_cache->goto-->AE Cache
2) check for CPA Cache also
...Satish

AS2 Sender Adapter -- Need clarity.. Very Very Urgent...!!!

Hi AS2 experts,
Regarding AS2 sender adapter:
We will provide the details
TP: HTTP
MP: AS2
*Message Subject = **
1. Can anyone please clarify what is this message subject ??
Its the incoming file name we need to provide?
According to few blogs,
2. We will be providing the below URl to the partner system to send there messages.
HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
Consider im having partner systems A,B,C .
and we will be creating 3 communication channels(CC1 ,CC2 ,CC3) to three partner systems.
If i provide same URL to all the three partner systems.
Then how it will differentiate like which file is belongs to which interface (from which partner it is coming)?
And im not providing anything specific in all the AS2 sender comunication channels to differentiate these files.
What is this AS2ID which we will provide in Party Configuration.
WIll it makes any difference to above problem?
Kindly suggest me if anyone has idea about this asap.
Its Very very urgent.
ThankYou.
Regards
Deepthi.

Hi,
>>>>1. We need to provide the below URl and Port to the partner to receive the messages?? HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
I guess yes . you need to provide this URI.
>>>>>2.Is it possible to do content based routing by using Message Subject?
yes it is possible to determine the receiver depending upon ur condition. Please provide the context object at design time and at the time of Configuration , using XPATH you can determine conditional receiver.
please look in to this links u will come to know about seeburger adapter.
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

Very urgent, no Transacctions Types possible to create Business Transaction

Hello, this question is very urgent, please I will be very pleased if anybody can helps me.
When I want to create a Business Transaction, at CRMD_ORDER, I dont have any Transaction Type to choose to create the Business Transaction, so I can't create anyone.
I have got many Transaction types, I am usign CRM 5.0 and I have got many Transaction Types with all Channel communication allowed.
Please check this image for further information:
<a href="http://img380.imageshack.us/my.php?image=businesspq5.jpg">http://img380.imageshack.us/my.php?image=businesspq5.jpg</a>

HI Fernando,
Please check whether all your Transaction type are in Active mode or Not.
Also check the Allowed Channels status, if it is not filled please add the same from the drop down.
Regards
Arun Kumar

Very Urgent Pls help : Change of payload type to user-defined types

Hello Experts
I was using sys.xml_type as payload type in my queue table creation.
consider xml message
<order>
<id>1</id>
<load rerer="mq" erere='gg" > </load>
</order>
This i inserted into queue table using enqueue process.
this is done.
BUT NOW My manager wants to change the payload type.
he created a type
create or replace type systype as object (msg varchar2(4000));
Now payload type of queue table is changed to
PayloadType==>aq.systype.
Pls help me how can i insert xml messages into this queue table.
This is very urgent. Pls help me
S

I've just read this thread three times and I have absolutely no idea what you are doing, in what version, and what you are asking for help with.
Do you want to change the message type? If you do you MUST drop the queue and start over again from the beginning.
Do you want to enqueue messages?
Post your DDL and other relevant information or you are on your own. We can not guess at your issue.

Why SOAP Adapter Type is missing ?

Hi all, I'm following the WebLog Invoke Webservices using SAPXI (/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi) and I'm not able to use a SOAP Adapter.
In particular, when I try to select the Adapter Type I obtain the following list:
File
HTTP
IDoc
JDBC
JMS
Marketplace
RFC
RNIF
XI
Why SOAP Adapter Metadata is missing ?
Thanks in advance for your collaboration
Best regards
Gianfranco Bello

Hi, we're reimporting the SAP BASIS software component (XI3_0_SAP_BASIS_6.40_00_00.tpz).
The present our situation is:
SAP_JTECHF 6.40 SP11 (1000.6.40.11.0.20050221011822) SAP AG 20050425182200
sap.com SAP-JEECOR 6.40 SP11 (1000.6.40.11.0.20050221011406) SAP AG 20050425182155
sap.com SAP-JEE 6.40 SP11 (1000.6.40.11.0.20050221011617) SAP AG 20050425182238
sap.com SAP_JTECHS 6.40 SP11 (1000.6.40.11.0.20050221012022) SAP AG 20050425182237
sap.com LM-SERVICE 6.40 SP11 (1000.6.40.11.0.20050221012100) SAP AG 20050425182231
sap.com SAP-XIAFC 3.0 SP11 (1000.3.0.11.2.20050407085022) SAP AG 20050425212631
sap.com SAP_XIAF 3.0 SP11 (1000.3.0.11.1.20050324062550) SAP AG 20050425220610
sap.com SAP_XITOOL 3.0 SP11 (1000.3.0.11.3.20050405055844) SAP AG 20050425222949
But the SOAP Adatper still missing.
Is there a newly version to install ?
Regards
Gianfranco

Adapter types & comm. channels missing in comm channel monitoring

Hello All,
We recently created a new sandbox XI system from a copy of our XI Test system
system. We used the SAPinst system copy process for ABAP+JAVA to create
this new XI sandbox system. We have followed all of the XI/PI post copy procedures listed in the system copy documentation and almost everything is working except when we going into the runtime workbench for XTX and go into communication channel monitoring for the adapter engine. When we get
here we do not see any adapter types where we should be seeing types such
as JDBC, BD, CIDX, FILE, JMS, etc We also do not see any communication channels in the communication channel monitoring if we select use filter to display all.
Any ideas?
Any help on this would be much appreciated
With regards
Steven

Hi,
First check in Integration Directory. Just create any dummy Communication Channel, if you are able to select your adapter for your communicatio channel then this is a cache issue. Just refresh the CPACache by this url.
http://<server name>:<HTTP Port>/CPACache/refresh?mode=full
Else you are not able to select any adapter for your communication channel then you have forgot to import the SAP BASIS Software Component Version into Integration Repository.
You can find it from your installation DVD's, and if you are not able to find then you can download it from service market place as given below..
[Click on this URL|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20]
In Search Term Enter SAP BASIS 7 or 3.
Now click on XI CONTENT SAP_BASIS 7.00 (if u r using PI else select SAP_BASIS 3.0) -
>
Database independent -
> SAPBASISxxxxx-0888.ZIP (this file should be based on your SP level)
Just save this file on your machine and unzip it.
Now put this in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
Now login to Integration Repository and from menu TOOLS ---> Import design objects and import it.
Regards,
Sarvesh

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Doubt in setting values-- very urgent - please!

hai,
i am creating a java bean ..
public void setTitle_cont(String proj_title_cont[])
     for(int i=0;i<3;i=i+1)
     this.proj_title_cont[i] = proj_title_cont;
public String getTitle_cont()
{//error come here - says "missing return statement"
     for(int i=0;i<3;i=i+1)
     return proj_title_cont[i];
setTitle_cont() is working fine..but getTitle_cont() shows error...
can anyone please help out..its very urgent..
thanx in advance
regards
koel

Your code looks strange, it contains some errors. First of all, what does your set...() method do? You have a for-loop that does the same thing 3 times. Your get...() method has a return inside a for-loop. That makes no sense; the method will return at the first iteration.
What is the type of the member variable proj_title_cont? Is it a strring array (String[]) or a single string (String)?
You probably wanted to do something like this:
// member variable
private String[] proj_title_cont;
public void setTitle_cont(String[] proj_title_cont)
this.proj_title_cont = proj.title.cont;
public String[] getTitle_cont()
return this.proj_title.cont;
}Jesper

Adapter type missing - very urgent

Similar Messages

Maybe you are looking for