Adapter Type not found
Dear All,
In Integration Configuration while defining Communication Channel
i click on Adapter Type list it says "No Object Found"
I want to see the standard Adaper List in Communication Channel
Thanks,
RP
Hi,
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file <b>XI7_0_SAP_BASIS_7.00_10_00.tpz</b> (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
Regards,
Balaji.M
Similar Messages
-
JDBC adapter type not visible in Communication Channel
Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N -
Getting the Adapter Class Not Found Error in the Java Manipulator
Hi,
I wrote a custom java manipulator for the baseline update and created a jar file for the class. This works fine in the Windows machine. All I have to do is while specifying the CLASSPATH, I entered the ./ib/newManipulator.jar; ./lib/additional_dependency.jar. When I tried to deploy the same code in the Unix environment, it fails saying the Adapter Class not found. The only difference from windows and Unix environment is that in the windows machine, in order to run the base line update, I go to the directory my_project->control->baseline_update.bat but in case of Unix environment I have a separate location where I have a shell script called run-baseline-update.sh located at /apps/bin which invokes the baseline.sh in the directory my_project/control/baseline.sh. I even tried to put the full path of the jar files e.g. /my_project/lib/newManipulator.jar; /my_project/lib/additional_dependency.jar in the class path but still the same issue. Any suggestions?Unix classpath needs ":" as the path separator, not ";". Changing that will make this work.
For reference, later versions of the deployment template make this configurable, so you'd see (in environment.properties):
# PATH_SEP_VARNAME: for platform-independence
PATH_SEP_VARNAME=;
# Forge needs record store libraries as well as Spring to load record store adapter configuration files
FORGE_CLASSPATH=./config/lib/java/spring-delegate-adapter-1.0.1.jar${PATH_SEP_VARNAME}./config/lib/java/spring.jar${PATH_SEP_VARNAME}./config/lib/java/eacToolkit.jar${PATH_SEP_VARNAME}./config/script${PATH_SEP_VARNAME}.
You can then add the following to your <forge /> definition in AppConfig.xml:
<arg>--javaClasspath</arg>
<arg>${FORGE_CLASSPATH}</arg>
Hope this helps.
Michael -
Hello All,
I am doing a file to Idoc scenario. When I open the communication channel that I created, there is a warning message popping up as below:
Adapter Engines Not Found
Unable to find associated SLD element for specified class (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, IntegrationServer.pid.svdud01, string], target element class: SAP_BusinessSystem)
Any idea on this issue techies?
Thank you.
Ramesh.Thank you all.
I have been checking all possibilities.
I tried to do the cache connectivity test in thr runtime workbench, but it throws the following error:
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Error while consolidating data
[Data Evaluation]: Couldn't parse Configuration Data cache update XML string from Directory.
I checked the technical and business systems for the PI system and they are maintained correctly.
Any more ideas ?
Many thanks. -
Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi, my problem is "OCI-22303: type not found".
I have a package in a database, say, MY_PCKDG.aa_number
Then I'm trying
std::vector<int> var;
var.push_back(12);
setVector(stmt, index, var, "MY_PCKDG.AA_NUMBER"); //here it fails saying the type was not found
How to find the type? I have tried the type name alone, both uppercase and non-uppercase, and <package name>.<type name>, both all uppercase and non-uppercase.. Any suggestions?
--AndrewFernando . Thanks for the response. I am getting this error when I am trying to create a risk. Attached is the snapshot of the error. I have tried stuff like deleting the cache, checked SICF to see if Web Dyn Pro is active etc
-
After connection lost SetVector fails with OCI-22303: type not found
Hi there,
I use statelessConnectionPool and after application is loosing connection to oracle for short time, all folowing setVector calls will fail with
SetVector fails with OCI-22303: type "DEMO"."PROPERTIES" not found
however its there and was working fine before connection was lost,
As far as i read about the getConection for statelessConnectionPool will reestablish connection if required to return valid connection handle, but somehow the setVector does not work.
Any idea?
Thanks in advance
AndrewHi,
I want to reconnect to same instance, I think i missed tnsnames part, did not knew its required, so i should add to client tnsnames or server the FAILOVER_MODE part?
like this example:
PAYROLL =
(DESCRIPTION =
(ADDRESS =
(COMMUNITY = TCP.world)
(PROTOCOL = TCP)
(HOST = VSERVER)
(PORT = 1521)
(CONNECT_DATA =
(SID = HR)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 15)
strange thing that connection seams to be valid only in complains about type not found, or maybe connections are not valid only i cant see it, does the not valid connections in the pool are reconnected or make new when i call GetConnection? or i should terminate connections on "end of comm channel error" so when db is reachable again it will reestablish new connections?
Andrew -
PI 7.11 - Configuration: Adapter Engines Not found
Hi,
We have a PI 7.11 System that is connected to a central SLD. There are also two PI 7.0 systems connected to this SLD. If i open a communicationChannel i get following message:
Adapter Engines Not foundNo SLD elements of type SAP_XIAdapterFramework found
If i look in the SLD Technical Systems (Exchange Infrastructure), i see the three PI systems but only the Adapter Engines of the two PI 7.0 systems.
How can i check if the adapter engine is up and running and if it has correctly been registered by my SLD. Are there any documentation according this configuration?
Thanks in advanceIt seems adapter engine is not registered properly. For more details, please refer to the following sap notes:
1. [Note 764176 - Error in XI due to inconsistent SLD contents|https://service.sap.com/sap/support/notes/764176]
2. [Note 1117249 - Incomplete Registration of PI components in SLD|https://service.sap.com/sap/support/notes/1117249]
3. [Note 1292803 - Configuration Wizard: PI SLD Self Registration|https://service.sap.com/sap/support/notes/1292803] .
Regards,
Sunil Chandra -
PI 7.0 JMS Rcv Adapter: Object not found in lookup of XIJMSService
Hi all,
When sending messages to an JMS queue, JNDI setup, in the Message Monitoring we get the error:
"MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of XIJMSService.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of XIJMSService."
The Error points to the Module Processor. Indeed the 2 default Modules are used:
- SAP XI JMS Adapter/ConvertMessageToBinary
- SAP XI JMS Adapter/SendBinarytoXIJMSService
This second Module contains 'XIJMSService', and according the documentation (http://help.sap.com/saphelp_nw04/Helpdata/EN/4d/a3bc97ff55c742af7faed661635baf/content.htm)
, it uses a parameter named 'modulePoolAdminLookupName' with the default value: /XIJMSService.
This is how far we get. Even when we assign a different value to the parameter 'modulePoolAdminLookupName' , the error in the Message Monitoring stays the same.
Has anyone experience with this issue, or any ideas to investigate or solve this?
Thanx in advance, Walter.Hi all,
Issue is solved. Apparently the Java-version on our XI-server (1.4.2) could not handle the Vendor's JMS-driver we installed (ActiveMQ 4.1.2.jar) so we tried using the ActiveMQ 4.1.0.jar as the JMS-driver. Now it is OK and message are put on the destination queue.
Walter. -
Type conflict where type not found in sequence file
Hi,
from a central master sequence, I am starting several sequences from other sequence files in new executions. These sequences have individual types as input and output parameters, the types being defined within these sequence files.
The master sequence only knows the names (as strings) of these types and when I do a "Find/Replace in files" in the master sequence file looking for those types, they are not found.
However when I change one of the types in its respective sequence file while I have the master sequence file open, the master sequence file is shown with an asterisk and later I get a type conflict if the settings is to "Never allow automatic type conflict resolution". This is fairly awkward since the master sequence file is supposed to be password protected and no-one should have to touch it in a project.
What can cause this behavior?
Apparently, usage of these types spread around through all sequence files although they do not have any need for using the types from other files.
Is it possible that it makes a difference whether the type was first defined in a type palette file or directly in a sequence file?
Best regards,
PeterPeter,
using the data type as parameter in another sequence file will include the type definition in the calling sequence file, therefore changing it. I am not sure why the Find/Replace tool does not display it, but it shows up in the types palette of the file.
When the data type is changed, it will result in a type conflict....
So when trying to reproduce the issue with TS 2010, i receive an dialog for resolving type conflict when setting to never do an automatic resolve...
Nevertheless, the calling sequence must be updated for sure if a used type is changed.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
JPub Error User-defined type not found
I just have found about Jpub could help me with my problem, so i try it, but when i try to publish a package it gives me this error:
J2T-118, ERROR: User-defined type "ADMCAD.PKG_CONSULTA_BR_NOME.TAB_ELEITOR" was
not found in the database
This is the package:
create or replace package admcad.pkg_consulta_br_nome as
VT_NUM_INSCRICAO VARCHAR2(12);
VT_COD_SIT_ELEITOR NUMBER(2);
VT_NOM_ELEITOR VARCHAR2(70);
VT_DAT_NASC NUMBER(8);
VT_NUM_ZONA NUMBER(4);
VT_SGL_UF VARCHAR2(2);
-- tipo que sera retornado
TYPE REC_TAB_ELEITOR IS RECORD (
NUM_INSCRICAO VT_NUM_INSCRICAO%TYPE,
NOM_ELEITOR VT_NOM_ELEITOR%TYPE,
NOM_PAI VT_NOM_ELEITOR%TYPE,
NOM_MAE VT_NOM_ELEITOR%TYPE,
DAT_NASC VT_DAT_NASC%TYPE,
DAT_DOMIC_MUNIC DATE,
COD_SIT_ELEITOR VT_COD_SIT_ELEITOR%TYPE,
SGL_UF VT_SGL_UF%TYPE,
NUM_ZONA VT_NUM_ZONA%TYPE);
TYPE tab_eleitor IS TABLE OF REC_TAB_ELEITOR INDEX BY BINARY_INTEGER;
TYPE cursor_consulta IS REF CURSOR;
SUBTYPE T_NUM_INSCRICAO is VT_NUM_INSCRICAO%TYPE;
SUBTYPE T_COD_SIT_ELEITOR is VT_COD_SIT_ELEITOR%TYPE;
SUBTYPE T_NOM_ELEITOR is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_NOM_PAI is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_NOM_MAE is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_DAT_DOMIC_MUNIC is date;
SUBTYPE T_DAT_NASC is VT_DAT_NASC%TYPE;
SUBTYPE T_SGL_UF is VT_SGL_UF%TYPE;
SUBTYPE T_NUM_ZONA is VT_NUM_ZONA%TYPE;
TYPE rec_consulta IS RECORD (
num_inscricao T_NUM_INSCRICAO,
cod_sit_eleitor T_COD_SIT_ELEITOR,
nom_eleitor T_NOM_ELEITOR,
nom_pai T_NOM_PAI,
nom_mae T_NOM_MAE,
dat_domic_munic T_DAT_DOMIC_MUNIC,
dat_nasc T_DAT_NASC,
sgl_uf T_SGL_UF,
num_zona T_NUM_ZONA);
procedure prc_consulta ( d01_cod_fon_nome in varchar2,
d01_cod_fon_mae in varchar2,
d01_dat_nasc in number,
d01_qtd_regs out number,
vtab_eleitor in out tab_eleitor);
end pkg_consulta_br_nome;
This is the command line:
jpub -user=XXX/XXX@there -sql=admcad.pkg_consulta_br_nome
Am I wrong, or jpub was suppose to publish any type in the signature?
Please help.
Rafael DittbernerRafael,
I suggest you try asking in the Toplink discussion forum. You can find a link to it from this Web page:
http://www.oracle.com/technology/products/ias/toplink/index.html
Good Luck,
Avi. -
Soap Adapter Channel not found
I'm having problems geting the Sender SOAP adapter to work.
I'm using to test it
http://<XXXXXXXX>:50000/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:SunriseSoftwareSostenuto:TimeSentSoap
where <XXXXXXXX> is our domain
but this returns channel not found
SunriseSoftwareSostenuto is the Service
TimeSentSoap is the communication channel
I've already established that the Soap Adapter is active
Is there something that I've missed ?hi
I've tried to connect to the Soap adapter using
http://xxxxxx:50000/XISOAPAdapter/MessageServlet?channel=:SunriseSoftwareSostenuto:TimeSentSoap
Where SunriseSoftwareSostenuto is the business service and
TimeSentSoap is the communication channel
but get the error code returned below
I've tested the sender agreement/ communication channels config internally and they seem fine
could someone point me in the right direction
is it a java error
or is it a authorisation problem?
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xi/NW04S_21_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) -
Hi Experts,
I used name for basictype 'ZMDOSTATUS' In R/3 system , now after upgrade to ECC6,while runing report to send Idoc message displayed "Basic type 'ZMDOSTAT' NOT FOUND" Last two charcher is beein truncated. How we can solve this problem without changing the name of basic type. please suggest some approch. Waiting for your reply.
Thanks :-
Ravinder Singhhi ravendra,
can you let us know what the exact problem recently i have worked on upgradation project but i have not faced the problem what your telling . basic type 'ZMDOSTATUS' are you able to display in we31 code. if you able to do what exactly the problem .
when the upgradation every basic type will be copied to new server .
let us know the exact problem.
~linganna -
Type not found: Point in Flash CS5.5 on Mac when player is AIR for iOS
I've installed the AIR 3.0 SDK as detailed by Porawee in this thread, including his corrections to the xml for iPhone further down in the thread. Everything worked at first, but since then I've rebooted my computer, and since the reboot I can no longer compile an .as file that compiled before the reboot and nothing has changed in that file. Specifically, I'm getting error 1046: Type was not found or was not a compile-time constant: Point. I've checked, and sure enough, I have an "import flash.geom.Point" line in with the other imports.
Ok, now here's the truly odd part: if I change the player from AIR for iOS to AIR 3.0, it compiles just fine. I get the same error, however, when the player is AIR for Android.
Anybody experienced/fixed this or am I re-installing Flash?I've been poking around trying to fix this, and I discovered something... the error occurs on this line of code:
public function GetIndexOfPointInVector(PointToFind:Point, VectorArray:Vector.<Point>):int
If I comment that function out (it's not used in this particular project), I don't get that error anymore, even though there are plenty of other Points in use in that very class. Possibly a problem with Vector typing?
edit: and now StageOrientationEvent is gone.
Message was edited by: Sean A Simpson -
Help Required to configure GRC Work Inbox Type Not Found Error
All .. I am new to the hands on part on GRC 10. Am trying to configure RM Work INbox. When I go through NWBC to Risk Asessments and try to create a Risk am getting the below error: Type _Not-Found Error for the transaction GRRM_POWL_RNP and GRRM _POWL_RESPONE. Have tried some of the suggestions on earlier threads e.g SICF etc. Appreciate your help to resolve
Fernando . Thanks for the response. I am getting this error when I am trying to create a risk. Attached is the snapshot of the error. I have tried stuff like deleting the cache, checked SICF to see if Web Dyn Pro is active etc
Maybe you are looking for
-
2 accounts on the same computer
hi guys. sorry for probably submitting a basic question but im struggling to work how to do something. ive just bought a new intel imac and want to set up my wife as a second user. i also want her to have access to the itunes library and iphoto. so t
-
Itunes version for ipod touch 1st generation
i recently upgraded to itunes 10 (the itunes version that i was told to install while my 1g was logged into my old version of itunes). the upgrade was a little long and repetitive but it went fine. unfortuneately itunes 10 does not recognize a 1g: wh
-
Hello all, We want to change the Self Service HR address page. Seeded, it is driven off of the City. An LOV is provided for the user to match. Short story, it is cumbersome, and not all the fields that are required, are marked as such (though there i
-
I have Oracle 10.2 database installed on Windows 2003 server with system, application and data partitions. It is also SAN drive attached to this server, with lot of free space. I would like to build standby database for testing purposes. Is it possib
-
Display two different column types in cross tab
I am using Cross Tab template in crystal XI and I have to show two different column types one is of type int and other is of type string. Below is the format of the report AmountGiven Amount Spent