Adapter up and down

Hi,
I have one cluster of two nodes, with Netware 6.5 SP1 and eDirectory 8.7.3
installed. In one of the nodes it continuously appears this message:
23/02/2006 9:25:16 : CE1000-6.90-0
Severity = 0 Locus = 4 Class = 5 ID = 0x1070000
CE1000-NW-000-Adapter 2-Board 2:
Link is down.
23/02/2006 9:26:35 : CE1000-6.90-0
Severity = 0 Locus = 4 Class = 5 ID = 0x1070000
CE1000-NW-000-Adapter 2-Board 2:
Link is up. 1000 Mbs Full Duplex
and with time it causes down of node.
Can I help me?
Thanks.

On 06/10/2011 14:56, NOVELLJACK1 wrote:
> I'm experiencing basically the same issue but not losing the node that I
> know of.
First of all you may want to start a new thread as you're replying to
one that is over 5 years old.
> SYS$LOG.ERR reports the following on a consistant basis.
> Started happening after I updated Server with SP8
SP8 but what version of NetWare? 6.5 (since you've posted in the
NW6.x/OES forum)?
What SP were you running before you updated the server?
When you applied SP8 did you choose to upgrade LAN and storage drivers?
> My Server onboard NIC = Intel(R) PRO/1000
>
> Wednesday, 10-05-2011 8:33 am
> File reset by user: admin
> *************************************************
> 10-05-2011 10:06:23 am: E1000-8.24-0
> Severity = 0 Locus = 4 Class = 5 ID = 0x1070000
> E1000-NW-000-Adapter 1-Board 1:
> Link is down.
>
> 10-05-2011 10:06:25 am: E1000-8.24-0
> Severity = 0 Locus = 4 Class = 5 ID = 0x1070000
> E1000-NW-000-Adapter 1-Board 1:
> Link is up. 100 Mbs Full Duplex
>
> Novell Driver:E1000.LAN V8.24 Dec 22 2005
>
> Does Novell have a more recent driver? or what would you
> recommend for a NIC
> My Server is a Dell PowerEdge 700
AFAIK that's the latest driver Novell ship (bearing in mind NetWare is
no longer being supported).
Are you running any other post-SP8 patches as listed @
http://wiki.novell.com/index.php/Nw6...st_SP8_Patches
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Similar Messages

Eth0 is being up and down for several time during boot

My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK=""
TIMEZONE="Asia/Hong_Kong"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MOD_AUTOLOAD="yes"
MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="antony-tp"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="yes"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
Here is a segment of my dmesg
[ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.766808] ACPI: AC Adapter [AC] (on-line)
[ 2.776492] wmi: Mapper loaded
[ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
[ 2.778291] iTCO_vendor_support: vendor-support=0
[ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
[ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
[ 2.789182] [drm] Initialized drm 1.1.0 20060810
[ 2.789538] hub 4-1:1.0: USB hub found
[ 2.789616] hub 4-1:1.0: 8 ports detected
[ 2.792925] Non-volatile memory driver v1.3
[ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
[ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
[ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
[ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.800067] Registered led device: tpacpi::thinklight
[ 2.800091] Registered led device: tpacpi::power
[ 2.800106] Registered led device: tpacpi::standby
[ 2.800120] Registered led device: tpacpi::thinkvantage
[ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.801162] sdhci: Secure Digital Host Controller Interface driver
[ 2.801164] sdhci: Copyright(c) Pierre Ossman
[ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.801709] Copyright(c) 2003-2011 Intel Corporation
[ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
[ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
[ 2.802188] Registered led device: mmc0::
[ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 2.845820] Registered led device: phy0-led
[ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
[ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.943739] mei 0000:00:16.0: setting latency timer to 64
[ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
[ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
[ 2.946523] mei: unable to register watchdog device.
[ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
[ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 3.274597] Bluetooth: Core ver 2.16
[ 3.274611] NET: Registered protocol family 31
[ 3.274612] Bluetooth: HCI device and connection manager initialized
[ 3.274614] Bluetooth: HCI socket layer initialized
[ 3.274614] Bluetooth: L2CAP socket layer initialized
[ 3.274618] Bluetooth: SCO socket layer initialized
[ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.276006] usbcore: registered new interface driver btusb
[ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
[ 3.444567] Linux media interface: v0.10
[ 3.447387] Linux video capture interface: v2.00
[ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
[ 3.448690] usbcore: registered new interface driver usbhid
[ 3.448691] usbhid: USB HID core driver
[ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 3.450987] usbcore: registered new interface driver uvcvideo
[ 3.450988] USB Video Class driver (1.1.1)
[ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.492062] i915 0000:00:02.0: setting latency timer to 64
[ 3.538056] mtrr: no more MTRRs available
[ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.538271] [drm] Driver supports precise vblank timestamp query.
[ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
[ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 4.407165] fbcon: inteldrmfb (fb0) is primary device
[ 4.575259] Console: switching to colour frame buffer device 170x48
[ 4.577042] fb0: inteldrmfb frame buffer device
[ 4.577043] drm: registered panic notifier
[ 4.607860] acpi device:01: registered as cooling_device4
[ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
[ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
[ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
[ 5.099467] NET: Registered protocol family 10
[ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.098038] Bluetooth: RFCOMM TTY layer initialized
[ 6.098055] Bluetooth: RFCOMM socket layer initialized
[ 6.098057] Bluetooth: RFCOMM ver 1.11
[ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
[ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
[ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.663056] eth0: no IPv6 routers present
Any hint for tracing the root of this problem? Thank you very much!

Hi ...
If you have moved the Safari application from the Applications folder, move it back.
As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
Go to ~/Library/Caches/com.aple.Safari.Cache.db. Move the Cache.db file to the Trash.
Try Safari.
Mac OS X (10.7.2) < from your profile
If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
Update ...
~ (Tilde) character represents the Home folder.
For Lion v10.7x: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

Adapter FEX and VM Fex

Hi!
I have a questions about Cisco Adapter FEX and VM Fex.
As i understand, Cisco Adapter FEX gives multiple vNIC on one mezzanine card, and each of them appears as virtual port on Fabric Interconnect.
Also, same thing for VM-FEX, each VM NIC appears as virtual port on Fabric Interconnect.
Am i right?
Thank you!

Adaptor FEX is I/O adaptor virtualization, which is agnostic to the OS and therefore works in virtualized as well as non virtualized environments.
VM-FEX (also called Hypervisor Bypass) is available for different Hypervisors
Cisco UCS Manager VM-FEX for Hyper-V CLI Configuration Guide, Release 2.2
Cisco UCS Manager VM-FEX for KVM CLI Configuration Guide, Release 2.2
Cisco UCS Manager VM-FEX for VMware CLI Configuration Guide, Release 2.2
Cisco UCS Manager VM-FEX for Hyper-V GUI Configuration Guide, Release 2.2
Cisco UCS Manager VM-FEX for KVM GUI Configuration Guide, Release 2.2
Cisco UCS Manager VM-FEX for VMware GUI Configuration Guide, Release 2.2
Cisco UCS Manager VM-FEX for Hyper-V CLI Configuration Guide, Release 2.1
Cisco UCS Manager VM-FEX for KVM CLI Configuration Guide, Release 2.1
Cisco UCS Manager VM-FEX for VMware CLI Configuration Guide, Release 2.1
Cisco UCS Manager VM-FEX for Hyper-V GUI Configuration Guide, Release 2.1
Cisco UCS Manager VM-FEX for KVM GUI Configuration Guide, Release 2.1
Cisco UCS Manager VM-FEX for VMware GUI Configuration Guide, Release 2.1
Cisco UCS Manager VM-FEX for KVM CLI Configuration Guide
Cisco UCS Manager VM-FEX for KVM GUI Configuration Guide
Cisco UCS Manager VM-FEX for VMware CLI Configuration Guide
Cisco UCS Manager VM-FEX for VMware GUI Configuration Guide
example VM-FEX for VMware ESX
VM-FEX (previously known as VN-link) is a method to extend the network fabric completely down to the VMs. With VM-FEX, the Fabric Interconnects handle switching for the ESXi host's VMs. UCSM utilizes the vCenter dVS Application Programming Interfaces (API) to this end. Therefore, VM-FEX shows as a dVS in the ESXi host.
There are many benefits to VM-FEX:
Reduced CPU overhead on the ESX host
Faster performance
VMware DirectPath I/O with vMotion support
Network management moved up to the FIs rather than on the ESXi host
Visibility into vSphere with UCSM

My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Solved: Attention T510 owners: Audio / sound volume goes up and down

Hi all,
I am a new owner of a T510, and have discovered the audio goes up and down when listening to music through the speakers, running on battery. I would like to get in contact with other T510 owners, who can test if their unit has the same problem - try this:
1. Check all the settings in the SmartAudio control panel (using the newest driver) - making sure no EQ is set, nor VOIP settings or anything like that.
2. Check that no plugin was loaded in the sound control options (I am using Windows 7, 32 bit).
Now try and play this youtube song, and listen to the volume at around 40 seconds when the lead singer begins - does your audio volume go up and then down again when he stops? If you listen to the complete song, it goes up and down some more times.
Link:
http://www.youtube.com/watch?v=8Wz09yHXheU
/Kenneth
Edit #1:
I can unfortunately now add, that the problem is also there when using the AC adapter. It is so **bleep** annoying the volume fluctuates, and it is VERY easy to hear on the above link. Hoping to hear from other T510 users what their findings is. For information I can tell I am using the power plan called "Maximum Performance", in the power manager from Lenovo. The T510 model is a 4349-4JG.
/Kenneth
Edit #2:
I have now had time to test it some more, using another HDD (didnt want to reinstall windows on my SSD, hehe) - and can hereby say that it seems to be a bug in the audio driver / SmartAudio control panel. Clean Windows 7, 32 bit, has the problems - but when you disable the VOIP function in the Smart Audio control panel, the problem disappears (actually it was just the VOIP function that was active before). If you then try to enable the VOIP function again, the "problem" does not come back (hence the bug comes into action now). After this test, I put my SSD back into the laptop, and tried to mess with the VOIP functions (again, had already tried to mess with it), and it did not do anything (hence the bug is active now). Therefore I reinstalled the audio driver - tried to check if the problem was there, it was. Then I did the same procedure as on the other HDD, tried to disable the VOIP (before I installed anything else and such!), and the problem is now gone. And the result now is that when I try and enable the VOIP function again, the problem does not come back (hence the bug is now active) = me happy
In short terms:
The bug can either have the VOIP enabled and you can not disable it, or it can be the other way around - it cant be enabled. To "turn" the bug around, reinstall the audio driver :-)
/Kenneth

Hi,
Ive been having this problem with my Compaq CQ60-615DX for almost a year now. When im listening to music I can hear the audio going up and down through it. One sec itll be loud and the next its like the audio being turned down (but the volume bar does not move). I also have SmartAudio with the Conexant High Definition. So, I see that you have figured it out. Ive tried to understand what you said but im not very literate with computers. Could you explain how to stop it step by step? I would appreciate it. Thanks.

Sound constantly goes up and down.

i have pavilion dv6 notebook My wireless goes off and will not turn back on and my sound constantly goes up and down.can anyone pls tell me the solution for this problem?

Hi,
Try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I downloaded Maverick and now I can't open pages from the Dock. The Pages icon just jumps up and down abut doesn't open. However, I can one pages by clicking on the App. I have an iMac with iWork 08.

Since upgrading to Maverick from Mountain Lion I am unable to open Pages from the Dock. When I click on the pages icon in the dock the icon just keeps bouncing up and down. However, I can open pages by clicking on the icon in the Apps folder. No problems prior to upgrading to Maverick.

Quit Pages. Drag its icon out of the Dock. Create a new one by dragging the application into the Dock. Test.

At times when dragging the vertical scroll bar my computer screen oscillates up and down for some time before going blank or not responding to any clicks requiring a forced system restart. What is wrong?

Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
Deepak

That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

Touchpad no longer scrolls up and down on Satellite A

So my HD crashed and i have to completely install Windows and all the Toshiba stuff with it a new.
All is well - except for one thing, my touchpad no longer scrolls up and down using the side of it in IE or Chrome, but it still works in SeaMonkey.
My Computer technician tells me it's an issue with getting some new driver for the touchpad, and i think i had to do that already about a year ago when i still had my original HD running.
So i went to the Toshiba.ch website and tried to find something.
I found all their "verfication" stuff and got inside the system and it instantly returned about 45 drivers by the looks of my "un"-driving eyeys they all could have been for whatever, so i searched especially for "touch pad" and yes, there was one for my Synapsis touchpad and XP as well, so i downloaded it - or i should say i opened it in Win Zip and checked first on the "readme file - wow, that was some Portugese in there, and that's when i kind of begun to feel lost.
I check in at Toshiba.ch, get a ton of drivers in my face i have no clue whether i am supposed to download them all or what, and when i finally pick what i think i need the whole thing seems to be in Portugese, what the crickey in the afternoon is this???
Anyway, before i download and try to install stuff i have no clue about i was hoping someone would actually give me a better hint on what i have to do exactly to get my touchpad to scroll up and down again also in Chrome, IE and where ever else.
I use Service Pack 3 on Win XP Pro and was told that's maybe why the old original driver for this laptop needs to be updated, but which file, where to get it, and how to properly install it please anyone???

Thanks for that, you confirm what i actually found out myself in the meantime.
The way i got this issue solved was that i first tried to download and install the Synaptics driver from the Toshiba site - that simply failed miserably, glad with no negative side effects at least.
Nesxt i used what unfortunately is way easier that sites like the Toshiba overload, i used Google to simply find the Synaptics website and instantly got the link to their driver download - eh voila, that actually gave me a .exe file, not an endless array of zipped files like the stuff on the Toshiba site in endless language versions!!!
This worked, tested everything out alread since a while.
- Which now leaves me with the question about the second driver you mentioned,
Alps Electric
what is that one needed for??
I have not seen this name on my lappy before, so totally unsure about whether it still needs this dispite things are working everywhere, i did not even have to go into the Device Settings of the Mouse / touchpad to change or rearrange anything in there after the direct download from Synapsis, but well informed is always best, so if you could let me know about that
Alps thing would appreciate...

CS4 Text around a bottom curve but text straight up and down?

I have to change the names on bottles that were shot and so I am trying to type the names. 1st I tried Photoshop and could not get the 3D to work and could not get the arc or the warp to work correctly.
So I went over to Illustrator. I finally got it figured out how to get the text on the bottom of the curve and reading corectly... BUT... the text on the R side of the curve, curves into the curve instead of each letter staying straight up and down horizontally. Help please? Nothing like being short on time and having to figure out how to get the text on a curve with the letters staying straight up and down instead of curving into the curve. Thank you!!!

OK. I did that but now I am trying to copy paste into my Photoshop file but when it comes out of Illustrator... It brings an odd white box that is really messing me up!!! Why won't it let me just copy the text? Why is Illustrator making an extra white box that is blocking my image? Thanks. See the 2 below. 1 is the bottle before I have gotten the name over and the other, is the bottle when I am trying to paste just the text in place. For some reason, Illustrator is adding a white box that is messing me up? 1 is how it should look. 2 is Illustrator is making an extra white box that is covering up most of my bottle.

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

I believe you naeed the Apple ADC to DVI adapter.

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

Trackpad is presenting a bug to open and close windows, mission control, and to move/roll the application (App) up and down.

Totally out of the blue, my trackpad is presenting a "bug". Every time that I try to open and close my mission control, or in the moments that I move / roll up and downs the Applications Screen, my Mac freezes for less than a second.
It never suffered any damage (NEVER!)! I am feeling very frustrated because I have no idea about what could cause such problem.
My MacBook Air is running OS X 10.9.5.
Any help will be very welcome!

Well, it all really depends on the custom program and how it was written. Does it have an ActiveX interface? If it does, than that's the easiest way to go. If you put an automation refnum on the fron panel, you can right click and it and choose Select ActiveX Class>Browse. The browser will list all of the ActiveX type libraries that are registered on your system. If you can find one that refers to your custom program, then you should be able to use it's methods and properties to control. If it does not have an ActiveX interface, then things get much more difficult.

ISA credit memos and down payment does not display data R/3 E-commerce 5.0

Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?

Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?

Program won't load, icon 'bounces' up and down and then...stops!

Any help please? I click on my Sims 2 icon to load up the game and all of a sudden it's stopped working. The icon bounces up and down in the sidebar and then stops. I have plenty of space to run the game and it's only just started happening.

Perhaps the game has become corrupted. Try reinstalling the game from the original install source and then apply any available online updates.

Adapter up and down

Similar Messages

Maybe you are looking for