Adapter works on 2 of 3 devices ONLY: Docking Stations for iPod

Weird problem:  30 to 8 pin adapter works on shelf system and ICF-CS10iP but NOT on ICF-CS15iP?  Anyone have any thoughts?

Hi SonyChick,
Welcome to the Sony Community!
I apologize for the delayed response. Regarding your inquiry, you may refer to this link for the compatible apple products for the adapter: Compatibility chart of Apple products and Sony portable products with 30-pin connector.
If my post answers your question, please mark it as "Accept as Solution"
Regards, 

Similar Messages

  • Microphone works with Utube and iTunes but only with earphones for games and Facebook

    Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

    Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

  • My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

    My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black.  Thanks!

    Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

  • Voice Memos are listed on the Playlist on my computer, but do not sync to my IPOD Touch so that I can listen on another device (stereo, dock station, etc.) When I click on the one that transfered over, a grey screen shows up "No Music" Help1

    Voice Memos are listed on the Playlist on my Ipod, but a grey screen comes up "NO Music".  How can I listen on a device?  Like, my car or my dock station/ radio.

    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
      iTunes: Restoring iOS software

  • Will a docking station for the T410 work on the T430u?

    Hello,
    All in the title really. I want to replace my T410 with a T430u but will the docking station still work?
    Solved!
    Go to Solution.

    Hi Jin Li,
    Kindly need your help to advice which of below docking part no is suitable for Thinkpad T430U (33512AA)
    0A65692
    ThinkPad Mini Dock Series 3 with USB 3.0 - 90W - MY/ SG
    0B47125
    ThinkPad Mini Dock Series 3 with USB 3.0 - 90W - MY/ SG - (0A65692 in RETAIL PACKAGING)
    0A65676
    ThinkPad Mini Dock Plus Series 3 with USB 3.0 - 90W - MY / SG
    0A33972
    ThinkPad USB 3.0 Dock - SG/MY
    Hope reply from you soon.
    Regards,
    Kennern 

  • Ipod nano works when attached to other devices only

    My brand new iPod Nano works when plugged into my car and home stereo, but not on its own.  Anybody know how to fix this?

    Sounds like a faulty battery.  Since you just purchased the iPod, return it for a replacement or refund.
    B-rock

  • I have just got a iPod 5 gen 32gb and lightning adapter but can't get it to work with my docking station it will charge but not play audio please help??

    I have bought a 5th gen iPod and lightning adapter but it won't wrk on my docking station it charges but doesn't play audio? Please help

    Does the dock manufacture say it is compatible with the 5G iPod with iOS 6.0.1?
    Have you went to the manufacturer's support site? Contacted them?
    Try resetting the dock. How you do that depends upon the dock
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Lightning to 30-pin Adapter works great with iPad Keyboard Dock

    In case anyone was wondering, the Lightnng to 30-pin Adapter works great with the original iPad Keyboard Dock and an iPhone 5. In fact it is better than the 4S was, as that tended to pop out. The Lightning adapter stays in place, and there is plenty of support in the back plastic to keep the iPhone in place, with any tiny stress happening at the Dock connector end: the Lightning connector itself seems very solid indeed. All the keys work, and charging is fine.
    (In answer to the implicit question: my employer blocks email at work on its systems, and it's convenient to have the keyboard hold the phone in place, and also charge it, which is the problem with the Bluetooth keyboard.)

    Might be a question better asked of the manufacturer of the iHome device.

  • My ipod only works on my docking station. Any help would be great!

    I have a 4GB ipod I got in Dec. and I got a docking station in May and I use them all the time. Well I left my ipod plugged into the docking station for a couple days, and it works fine on it, but when I tried to connect my ipod to my computer,it just blinked with an apple and a line over and over again. I tried turning it on to listen with my headphones and I got absolutely nothing, it did not turn on at all. I have tried everything that apple.com provided and nothing has worked so far, so anybody that might know how to fix this, please help!
    Thanx

    Hi Blane756,
    Thanks for using Apple Support Communities.  This article has steps for a different issue, a gray screen at startup, that I think would still be worth trying for your freezing issues:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Cheers,
    - Ari

  • What docking stations work with the ipad 4?

    I want to get my daughter a speaker docking station for her ipad 4, if possible not more than £50. All the ones i've looked at seem to be compatible with the older ipads and will work with version 4 but only if you plug a cable in which seems to defeat the object!
    Has anyone bought one or know of any please?
    Erica

    Well, I don't have any specific recommendations, since I've never used them myself.  There are so many choices, just make sure the specs say it works with your older iPod model.
    If you get a "plain" dock (like that Universal Dock), or an older version (no remote control) for cheap on eBay, it's not just for connecting to computers.  It has a audio output jack (that gets a high quality line out signal from the iPod's dock connector).  You can connect that to your stereo system's auxilliary input, or to any powered speakers (the type people connect to computers).  For power, connect the docking cable to a USB power adapter instead of a computer's USB port.
    And you can connect it to your computer too.  Plus, if the speakers go bad (or you want better ones), you don't have to throw the whole gadget away.  Just get new speakers, keep the dock.

  • IPod Touch on iOS 6.0.1 no longer works with docking station

    Hi there,
    I have an iPod Touch 4G recently upgraded to iOS 6.0.1. and a Philips AJ7041D/12 docking station for that.
    After the upgrade to iOS 6.0.1. the IPod says the docking is not a supported device and they no longer work together.
    Does anyone know how I can get things working again?
    Your help will be much appreciated.
    Regards,
    Dick

    Sometimes this works. However, sometime an iOS upgrade breaks compatibility and yoo will have to wait for an IOS update or an update to your dock's firmware.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • No longer working with docking station

    Second time this has happened. I had my iPhone 3GS working fine through a docking station for music -- now all of a sudden it only plays through the iphone speaker. Previous iPhone did the same thing with another docking station - worked then stopped working one day. Any fix suggested?

    Which docking station - make and model?

  • What docking stations work with the ipod mini gen 2?

    Looking to get a docking station for my ipod mini gen 2.  Are there any out there that are known to work?

    Well, I don't have any specific recommendations, since I've never used them myself.  There are so many choices, just make sure the specs say it works with your older iPod model.
    If you get a "plain" dock (like that Universal Dock), or an older version (no remote control) for cheap on eBay, it's not just for connecting to computers.  It has a audio output jack (that gets a high quality line out signal from the iPod's dock connector).  You can connect that to your stereo system's auxilliary input, or to any powered speakers (the type people connect to computers).  For power, connect the docking cable to a USB power adapter instead of a computer's USB port.
    And you can connect it to your computer too.  Plus, if the speakers go bad (or you want better ones), you don't have to throw the whole gadget away.  Just get new speakers, keep the dock.

  • Thankpad W530 and Docking Station - missing audio device???

    I needed to set up a new Thinkpad Minii Dock Plus Series 3/USB with my W530.
    First, there was a problem that the computer woldn't "seat" in the docking station.  After calling Lenovo Tech support, and not getting anywhere, I individually pressed the "prongs" that stick up from the docking station.  There was a loud "click" and several small thingies dropped down into the docking station.  After that, the laptop fit right in the way it's supposed to.
    I thought I was done, but I noticed an error message on my screen about a device driver error.  The Lenovo Technician had me go to control panel > system > device manager.....   right click on the machine name, and then click on "scan for hardware changes".
    Device Manager didn't show any errors, but doing this generated an error box that said:
    Device driver software was not successfully installed
    Unidentified device --- device unplugged
    High Definition Audio Controller --  ready to use
    NVIDIA High Definition Audio ---  ready to use
    What do I do now?  Is my docking station defective?  Do I need to plug something into the docking station for this update to complete?  The Lenovo tech had no idea what I might do, other than to call on Monday for "level 2 techs".
    As a related issue when I went to update Windows, the following update was to be installed:
    NVIDIA Corporation - Audio Device, Other hardware - NVIDIA High Definition Audio      3.9 MB
    When I try to install this update, I get:
    Code 800F020B  Windows Update encounterd an unknown error
    I think all of this is connected, but I don't see how it might have anything to do with the docking station.
    As to the docking station, I tested the power connection (green light is on), a USB port (works), the audio out connection (speakers work fine, with no crackling sound), and the Ethernet connection (works).  I haven't yet tried connecting an additional monitor, but that would have nothing to do with audio....

    This is the Windows update that will not install:
    NVIDIA Corporation - Audio Device, Other hardware - NVIDIA High Definition Audio
    Installation date: ‎5/‎11/‎2013 2:14 PM
    Installation status: Failed
    Error details: Code 800F020B
    Update type: Optional
    NVIDIA Corporation Audio Device, Other hardware software update released in July, 2012
    More information:
    http://sysdev.microsoft.com/support/default.aspx
    Help and Support:
    http://support.microsoft.com/select/?target=hub
    Any idea of how the docking station might be causing this?
    All updates were done prior to installing the docking station.
    Now I have this "problem" (that might be no big deal - I don't understand what's going on.

  • Sony docking station speaker not working with iPod touch

    We bought a Sony docking station for the iPod touch (4th generation) we got our son for his birthday.  The speaker on the docking station works when playing the radio, but not the iPod touch.  We returned the docking station for another, and we are having the same problem.  Which is why I am pretty sure the problem is the iPod touch and not the docking station.  The docking station actually will charge the iPod, just not project sound out of the speaker with the iPod.  It will, however, project sound out of the speaker when using the radio.
    Is there anything simple I could be missing in settings?  I can't figure this out.  TIA!
    Nick's mom

    Use the communities search box in the upper right and search for
    sony.
    The go to advanced search and limit search to the the iPod touch forum.
    Recently there has been several users posted here with the same problem with a Sony dock. I do not recall if it was solved.

Maybe you are looking for

  • Issue in Dashboard Prompt of OBIEE 11g

    Hi, I had recently migrated from OBIEE 10g to OBIEE 11g. I had found that there are lot of things which were working on OBIEE 10g are not working in OBIEE 11g. For Eg: I have scenario where i have 2 dashboards with different dashboard prompts. - *1st

  • Calling a backend JOB in oracle express

    Hello, I have oracle 10g Express installed, which is working fine. I have created a backend database job to update an index automatically every time a change is made to the require table. Code is:- DECLARE X NUMBER; BEGIN SYS.DBMS_JOB.SUBMIT ( job =>

  • Air File is Damaged

    Hi, Went to start Adobe Acrobat and it won't start, pops up with I need to update Air first. But when you click to update, an error is reported that "the air file is damaged." So I downloaded the latest Air from Adobe.com and ran install, no problems

  • Optimize iMac Storage for the new upcoming Foto app ?

    Hi, i know that on iOS 8.x the new Foto app will be able to reduce storage foto/video size downloading on iPhone/iPad only a smaller foto/video files. But the same will be also for iMac devices ? Assuming i'll have an iMac with only 256 flash hard di

  • Selecting from BKPF and BSEG

    Hi all, Can someone help me optimize the performance of this code as i don't know how else to select from BSEG as i cannot use a join coz its a cluster table. I need to find a way to improve the perfomance.Any help would be much appreciated. SELECT b