Adapterframework missing in SLD technicalsystem type ExchangeInfrastructure

Hi Experts,
All of sudden adapter framework was missing in SLD Technical system of type Exchange infrastructure, if any one had the same problem before can you please tell me how to resolve this, i already done following steps but no luck.
Your Adapter Framework is probably not registered in the SLD. You may force the
registration if you perform the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.

Hello Praveen,
Check note #1334053. It mentions notes #1117249 and #764176, tha will help you in registering the Adapter Framework.
In last case, check note #804124 and use the Selfregistration parameters to force the registration of that, if you are facing
the same behaviour after the initial notes.
Regards,
Caio Cagnani

Similar Messages

Provision Account key missing for a conditon type

dear all,
pricing procedure is not working properly.. whille doing purchase order the system shows provision account key missing for freight condition type in pricing procedure... please give a solution....
regards
deepu

Hello Deepu,
Just Check in T.code : M/08 whether account key is maintained for freight condition type in your pricing procedure.
Specifically check for the freight condition type(s) which is having 'accrual' ticked in M/06 - control data 2.
If the accrual is ticked in condition type in M/06, it should have an account key assigned to the condition type in the pricing procedure in M/08.
Check the same and revert back.
Regards
Gregory Mathews

Conversion factor missing for Exchange rate type BE

Dear Friends,
I am getting error while doing GR as " Conversion factor missing for exchange rate type INR TO USD"
waiting for your advice.
Thanks

Hi
In OBBS maintain the translation ratios between USD & INR and in OB08 enter the exchange rate for this pair of currencies
Anil

Block Sales document if License is missing under any license type

Hi,
We have a scenario where we using multiple license types for a legal regulation. If any license is missing for any license type that determined while screening, the order should be blocked.
For example, For Legal Regulation EAR, we have two License types LTYP1 and LTYP2 and we maintain only License for EAR with LTYP1. During the sales order creation, system screens and found that 2 license types determined. Since 1 license is missing for Legal Regualtion EAR with LTYP2, the order should blocked. But at this moment, system found 1 license with combination EAR with LTYP21 hence it is released.
But when we see the Log, system shows RED indicator against EAR with LTYP2, it means it could not found license for this combination, but the order is released. Our requirement is NOT to release this order and it should determine all the licenses determined for license types
How should we achieved this scenario? Pls help
Regards,
Pradeep

I finally managed to find my way through with this issue so for others who might have the same requirement:
1) Check the check box Check multiple license types under Global Trade Services > Compliance Management > Legal Control > Control Settings for Legal Control
2) Create an entry for the legal regulation and Code List Object PAPOF under Global Trade Services > Customs Management > Customs Code Lists > Assign Customs Code Lists Procedure to Legal Regulation
3) Create the issuing authority for the legal regulation under Global Trade Services > Customs Management > Customs Code Lists > Maintain Customs Code Lists for Legal Regulation
4) Assign the issuing authority to one license type out of two as I've noticed that it won't work if the two license types have the same issuing authority (one created license will release the order).
under Global Trade Services > Compliance Management > Legal Control > Define License Types
Config done on GTS 10.0

Keyboard missing letters as i type

I bought my laptop about 6 weeks ago and this has been a problem since day 1.I tried to chat with online suppot but the chap did not help me. When I type, every now and then the cursor freezes and - whilst it has frozen - the subsequent letters i type do not appear. Then it will unfreeze and the letters will continue as i type.This happens randomly and sporadically. It doesn't matter if I am typing fast or slowly, it still happens. As a result - say I were to type the line 'I went for a walk in the rain. I saw a black dog. I waved and said hello....'
It might appear something like: 'I went for a walk in the rin. Iaw a black dog. Iwaved andsaid hllo....'
As ilook up at the screen i see that what i intended to type has not appeared. Very frustrating and it is becoming time consuming with work and emails as i have to constantly correct. It is also an issue whilst entering passwords. ********* etc. Just wondering if someone can suggest help / a fix for this issue??? Thanks in advance.

Hello JoeyR,
Welcome to the HP Forums!
With the keyboard freezing, and missing letters that you type. I would suggest the following document 'Notebook Keyboard Troubleshooting (Windows 8)'. The part of the document that you will want to complete are Pressing keys does noting (keyboard is not working), and Key presses are slow to respond.
Please let me know the outcome of the troubleshooting.
Thank you.

Option 'Maintenance Order' missing in 'Allowed Object Types' tab in IMG of User status Profiles

Dear All
I have created a User Profile using T-Code OIBS.
Now I want to assign that User Profile to Maintenance Order. But in the 'Allowed Object Types' tab, the option "Maintenance Order" is missing due to which I am unable to assign it to Maintenance Order.
Could anyone tell how to add the option "Maintenance Order" in 'Object Types'.
Thanks in advance.
BK

Hi Peter
Thanks for your help.
I just found that in t-code BS13, the object categories ORI and ORH exist but 'No Status Profile' check is marked against them. That is the reason why the system is not showing the 'Maintenance Order' as an option in Allowed Object Types.
Thanks a lot !
Best Regards,
BK

Adapter Engine missing in SLD and RWB

Hi all,
I have no Adapter Engine in RWB or under technical systems in the SLD.
In Integration Directory I have "central adapter engine" in the adapter engine field in my File adapter .
But I get this message when I open the communication Channel:
"No SLD elements of type SAP_XIAdapterFramework found"
Please advice,
Thanks!

Hi Thomas,
Your Adapter Framework is probably not registered in the SLD. You may force the
registration if you perform the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
Refer sapnote in chapter 8.2 for more in the link provided below on Trouble shooting.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Cheers,
Ram.

Segment E1EDPO4 is missing in outbod message type ORDERS01

Hi
I have a problem. Though tax code is existing in PO, in the outbond IDOC type ORDERS01 the segment EIEDP04 is missing. Some cases , this segment is appearing. I really dont know the reason why it is behaving so eratic.
and Plant is defined in the item level for a meterial, it is now showing blank in in the segment EIEDPO1.
dont know the reason why it is behaving so earatically. Please let me know the reason.
It is very very urgent.
regards
rohini kumar

Hey Biju,
The fields are attached to the segments and the data is availble in PO and the Problem is why they are not picking up in original IDOC( while creating an IDOC).
eg: Tax code: V0 has been mentioned in Invoice segment in PO line item. but that is not showing in IDOC output. infact that segment EIEDP04( for taxes) it self is missing in output.
dont know the reason why it is not pickingup.
regards
rohinik umar

Segment E1EEDPO4 is missing in outbod message type ORDERS05

Hi Gurus,
When I create an Output type for PO using Message type ORDERS05, the segments E1EDP04 is missing in data records. Eventually this segment should carry the tax information. The tax information is very much appeared in Po and it is missing in IDOC. what should I do to make this segment appear in outbound IDOC data records.
Please mention the T codes and steps.
Thanks and regards
Rohini kumar

Hi,
You can use user exits EXIT_SAPLEINM_002 to populate segment E1EDP04 for outbound IDoc ORDERS05.
This segment is not populated in standard FM IDOC_OUTPUT_ORDERS.
Regards,
Ferry Lianto

IDOC Segment missing for MATMASS Message type

Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
1) Change pointers are defined in system for the message type T Code u2013 BD52.
2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
In our case IDOC is getting generated but with one segment missing.
We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
Regards,
Roshni.

Jürgen L. wrote:
> I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
> This seems to be home made.
>
> You are expecting that standard SAP programs are generating change pointers for your z-fields?
> Do you see a change history in material master for your z-field?
>
>
> follow the slution from this thread:
>
Yes ,This is a Z -field.
Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
This is z-field in the basic data view of material master.
Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
But in case of succesful IDOC the object value is same as material number.
Regards,
Roshni

Software Catalog missing in SLD server

hi
The Software Catalog in my SLD server(SAP XI 3.0) is deleted/missing, is there any way i can import it back.
Thanks
Jonu Joy

Hi Jonu
cimsap.zip and CR_CONTENT.zip will be avialable in <i>/usr/<SID>/SYS/global/sld/model</i>
you can import from there or if u want to import the new version then you need to download from <i>service.sap.com</i>
Regards
Sunita

First character missing sometimes when i type

it doesn't happen all the time but when i type something the first letter is missing iv'e noticed it mainly happening in safari
any suggestions? thanks

hmm, mine seems to be fixed
history: ever since 10.4.3 the first character typed after an idle period doesn't register, tried combo updater, 10.4.4, blah blah, problem got more/less frequent but still hit several times a day
three days ago by chance i ran disk utility and selected "verify disk", it said i had an "illegal name" and bailed, booting the tiger dvd and running disk utility could not fix it, nor could booting single user und using fsck
some surfing turned up an issue linked to vietnamese characters in filenames that are installed as part of adobe creative suite 2 (and also in some standalone cs2 apps)
this causes problems that once present can eventually result in serious damage to the disk structure, disk warrior was cited as being able to detect/fix the damage (apparently several other similar apps will not do it)
two days ago i got dw, it showed several of the adobe-linked issues as well as a few other (imho minor) things, it fixed the disk
since then the missing keystroke problem seems to be fixed too
maybe this is just chance, maybe the zillion reboots did it, maybe starting single user did it, could be anything really
so i decided to carry out the ultimate test and tempt fate by posting that mine seems ok now
i'm not suggesting dw fixes the missing keystroke, but if you have any adobe cs2 apps it might be worth seeing if disk utility shows any issues when you choose the "verify disk" option

My new ipodtouch 4.3.2 does not show the complete symbol bar at top and bottom,the whole page is shifted to one side -edges of keyboard missing so I cannot type .gadget is 1 mo old, fine till now...

hi- my new ipodtouch -screen is hiding part of each page-so it is hard to type,as the outermost symbols of the keyboard are missing.RESTORE and RESET have not helped.what trick can I use to bring the WHOLE page into view?Zooming in-out does not help--the edge of each page is out of view...
Any helpful advice/thanks..

I sounds like you may have turn on the Zoom setting for accessibility. Tap the screen with three fingers and it should go to normal. Then go to Settings>General>Accessibility and turn Zoom off. You can also turn it of by connecting it to your computer and going to the Summary Pane and go to Universal Access and turn Zoom off.

PO header missing with copied PO type

Hi friends,
We copied the new RB from standard PO type NB .Everything looks fine except RB's output header title" Purchase Order" is missing, while it still exits for NB.
Should I maintain somewhere?
Thanks,
Linda

Hi Linda,
Yes you need to maintain output header title" Purchase Order" in configuration of Output determination.
It will not copy from your master document type NB.
SPRO->IMP->Materials management->Purchasing-> messages-> text for messages-> Define text for purchase order. click on Headings in dialog structure, copy any stander doc. type and maintain title (purchse order) for your doc type RB.
Regards
Hari
Edited by: hari mukku on Apr 7, 2010 1:01 PM

XI IDOC missing segment definition in type E1LFM1M

Hi experts,
we have recently upgraded our ERP system to NW 702 EH5. As aresult a new segment definition was added to our segment type E1LFM1M ( segment def. E2LFM1M007). The problem we are havign is that our XI system is still running on NW700 and it doesnt have this segment defintion. Since the upgrade we are getting an error in transaction RFC complaining about the new segment definition E2LFM1M007 everytime we try to send a vendor from ERP to SUS using BD14. Is there a way we can deactivate the new segment definition E2LFM1M007 in segment type E1LFM1M?
Thanks,
Abdul.

Hi Abdul,
Actually it does not matter what are your systems' versions, PI can always handle an IDoc properly. All you need to do is perform the following steps in your PI system:
1. Log on to ABAP stack, go to t-code idx2, find your ECC system and that particular IDoc (I believe this will be CREMAS) and delete its metadata.
2. Log on to Enterprise Services Repository, find your SWCV where the IDoc definition was loaded, and load it again from your ECC system, then activate the change.
3. If necessary, also adjust the message mapping to use/not use the new segment. Activate your changes.
Once you have these steps completed, you are ready to retest your scenario and say goodbye to the error.
Hope this helps,
Grzegorz

Adapterframework missing in SLD technicalsystem type ExchangeInfrastructure

Similar Messages

Maybe you are looking for