Adapters in RWB

Hii
I have a problem in our RWB.In component monitoring status of adpter engine is Green. But in adapter monitoring it is showing only one adapter type i.e. JPR.
And there in component monitoring when I do "Cache Connectivity Test" Integration Directory is in Red Status and showing error message "Cache notification from Integration Repository failedError when accessing the Integration Directory"
What could be possible reason of both these errors?
Thanks and Regards
Sami

Hi !
refer these threads discuss the same 
Adapter Status Grey and Cache Error in acessing Integration Directory
Cache connectivity test failing
Integration Directory - Cache Notifications
Thanks!!

Similar Messages

How to enable viewing of payload for receiver RFC adapter in RWB

HI All,
We can see the payload of all adapters in RWB by clicking on the message link under component >> adapter monitoirng. However when i click on message link for receiver RFC adapter, it does not show any payload. How can I enable this payload?
Regards

Hey
Sync messages are Cached rather than persisted in RWB to save memory.
You need to change the following parameter in Visual admin to see sync messages in RWB
Service SAP XI AF Messaging:
messaging.syncMessageRemover.removeBody = false
its set to True by default hence it does not stores the messages.
You may have to restart the Java stack after the changes (but first try without restarting the Java stack).
Thanks
Aamir
Pl:You will see the sync messages in Message Monitoring in RWB (not sure if it will show up in Communication channel monitoring as well)

No messages in Moni or RWB

Dear All,
We have done with PI 7.0 Post-Installation and Readiness check. Everything looks ok as per document.
i have created a scenario Idoc---> XI --->File....
i have done necessary setting at sxmb_adm.... too.
i am not able to see any message in sxmb_moni nor at RWB.
Atleast i should get error messages if anything is wrong ,which i am not getting.
Could anyone tell me does i need to do check any service ..
i see all adapters in rwb in grey color..any service to be activated or will be in grey in 7.0 version.
Any suggestions is highly appreciated and awarded.
Kind Regards,
Vijay

hi vijay,
u need to check whether IDOC reached XI or not.
so for this u need to go to SM58 tcode(any IDOCS with errors) and check any errors available.
if u get "nothing to be displayed" then go to we02
we02 gives u IDOC list delivered to receiver systems.
before this execute BD75 TCODE and in that five the commit filed as blank
now press "F8".
after this go to we02 in that select the date range ,if u find the IDOC in 03(reached port but not reciever) then it has not reached XI and u can find the problem in SM58.
if it is "12" then IDOC was successfully posted to XI system.
u r not able to see any IDOC in XI means it is not out of sender R/3.
if any issues plz revert
Thanks & Regards,
Rama Krishna
Edited by: rama krishna talluri on Mar 10, 2008 6:02 AM

Monitoring,RWB

Hi All,
IDOC,HTTP,XI adapters reside on the ABAP Stack ,so they cannot be monitored in RWB.
1.So how can we monitor IDOC,HTTP,XI Adapters?
2.Cant we monitor RFC Adapter in RWB ?
3.Can we monitor the XI Adapter in SXMB_MONI?
4.Can we monitor SOAP ,MAIL,JDBC Adapters in RWB and SXMB_MONI?
5.What exactly done in the Support Project?Please explain with the examples.
Thanks in advance

Hi Ravi ,
Thanks for the reply.
1) IDOC, HTTP and XI adapter messages can be monitored from SXMB_MONI itself.
IDX5 can be used to monitor IDOC mesages.
How to check whether data is being posted by HTTP or not?
4) We can monitor SOAP ,MAIL,JDBC Adapters in RWB . The audit logs for all the Java based adapters are not accesible from SXMB_MONI, you have to use RWB only.
Can you please tell me how to monitor SOAP,MAIL,JDBC Adapters ?
Thanks in advance.

Adapters not found!

Hi,
I couldnt able to see any adapters other than JPR.our basis guy imported BASIS package ,I could see Basis component in IR.we did CPA Cache full refresh but still we didnt see any adapters in RWB ->Adapter monitoring.
he imported Basis pkg that he downloaded from service market place.
or does it need to be export BASIS SWCV in SLD and import that into IR as .tpz?
or either of them is fine?
thank you,
babu

hi
May this will be useful to u.
notes:
764176
804124
SXI_CACHE
Solution
In the Runtime Workbench in the Component Monitoring (hierarchy display),
check whether all expected components are listed completely.
The integration server is usually missing in the case of inconsistencies caused by the upgrade.
Under 'Technical Landscape' in the SLD, select the "Exchange Infrastructure" technical system type.
Check whether all XI components of the same XI domain are assigned and whether there are several XI domains for the server.
There may be two domains with similar names, one with a fully-qualified host name and one with a short host name.
This is an inconsistency.
Often, the integration server and another XI component
(directory, repository, or adapter engine) are not assigned to the same domain either.
You can solve the inconsistencies as follows:
1. In the SLD editing interface, choose "Administration" -> "Content Maintenance".
Select "XI Integration Server" from the drop-down menu, and navigate to the associations of the integration server.
Select the "XI Integration Server Logical Identity" association and delete the association by choosing 'Remove'.
2. Switch to "Home" in the "Technical Landscape" view, and select the "Exchange Infrastructure" technical system type there.
Select all domains and XI components for the host and delete these by selecting them and pressing 'Remove'.
3. Restart the J2EE server.
After you restart the server, the XI components log on to the SLD again and create a new entity of class "XI Integration Server".
4. To register the directory and repository again, you must also log on to the two tools.
5. In the "Technical Landscape" --> Technical System Type "Exchange Infrastructure" view, check whether all XI components are logged on correctly (Adapter Engine, Integration Directory, Integration Repository, Integration Server and Runtime Workbench/RWB).
The Adapter Engine components may be missing.
If so, stop and restart in the J2EE Visual Admin --> Server --> Services, and deploy application sap.com/com.sap.aii.af.cpa.app.
6. Change again to the administration interface --> content maintenance for the associations of the XI Integration Server.
Create a new association by pressing the 'New Association' button, select the "XI Sub-System viewed Application System" association type here, and in the next step choose the BC system for the Integration Server.
Save the association by choosing 'Associate'.
Create a new association by pressing the 'New Association' button, select the "XI Integration Server Logical Identity" association type here, and in the next step choose the business system for the Integration Server.
Save the association by choosing 'Associate'.
7. In the "Technical Landscape" --> Technical System Type "Exchange Infrastructure" view, check whether the assignment to the application system is also displayed there (the business system in which the Integration Server is running should appear in the "Application System" column for the Integration Server).
8. To make the changed associations known in the directory, the SLD temporary storage must be deleted in the directory.
To do this, log on to the Integration Directory and choose 'Environment --> Delete temporary storage areas for SLD data'

File Adapter not showing in Adapter Monitoring

I have created a basic scenario and when I go to check the file adapters they are not showing... Why is this what should I do

Hi Ricardo,
Please check the adapters in RWB...Is the File adapter is avialble or not?
If you can able to see then it should get appear in the Adapter list otherwise please deploye the the adapters once again.
Please let me know if you have any queries.
Regards,
chandu.

Adapter Framework File Adapter Message on hold

Hello,
we have a problem with the Adapter Framework and their the File Adapter / Messaging System.
We process one HR IDOC from R/3 through XI and send it to 7 file adapters. The SXMB_MONI tells us that all messages have been processed without errors and when you go to the RWB and use the Message-Monitoring many messages are on status HOLD. XI makes the message EOIO once you have multiple receivers and something blocks the messages in the AF. Is there a way to delete the AF queues like the XI queues with SMQ1 or SMQ2. It looks like SAP had duplicated the SMQ business in JAVA but I found no documentation how to clean up queues or what to do if the get stuck.
Thanks
Stefan

hi,
you can try question 3 adapters section
on the XI FAQ:
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
to see adapters in RWB
but if you see them when you do it then
it means that this XI's configuration was not complete
so you may expect further problems
Regards,
michal

Steps after post installation

Dear all,
I'm done with the post installation steps for P17.0 SR2.
When I login to IR and ID, no objects are found, and to test a file to file scenario.
I checked for adapters here RWB -> Component Monitoring -> Adapter Engine -> Adapter Monitoring , could only find JPR, other adapters were missing.
Can anyone direct me with the detailed steps of importing BASIC SCV's from SLD and required steps for testing a end to end scenario.
If anyone has a document or some material , listing out the steps, please mail me at [email protected]
Your help will be highly appreciated.
Thanks in advance,
Younus

To get the display of all the adapters
Follow the below steps:
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
Also if there Is any error u are getting
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Just have a lok at this post installationsteps.
http://help.sap.com/saphelp_nw70/helpdata/en/4b/c25a42793d1653e10000000a155106/frameset.htm
Regards,
Nithiyanandam

SP 14 problem...

hello alll...
i hav upgraded to sp14 and facing few problems with it...like im not able to see any adapters in Adapter monitoring ( let they be used or not)...no adapters r displayed at all...and ofcous, im not able to run any of my scenarios...
is this problem with installation or SP14 doesnt support certain features...but still i believe the configuration should not change...any suggestions...???
also, i have heard tht SP14 is not so stable..is it true???
any sugestions, appreciated..
regards....
vishal

hello shravan/sergey..
thanks for ur reply..but i hav upgraded from SP13 to 14, so the adapter thing is same as in bfroe where i open the adapters from RWB,buts exactly where im not able to see an adapters in the url provided by you.
so thts where the problem is.
also shravan, im yet to enquire abt the BASIS.tpz file
regards...
vishal

In XI no adapters are visible RWB and the error "AE_DETAILS_GET_ERROR"

In XI no adapters are visible in the RWB and I get the error "AE_DETAILS_GET_ERROR" 
It happens after a database copy from PRD to QAS. 
I tried restarting the system, and checked the SLD content. Also the cash is refreshed. 
The standard after care actions are carried out, like: SXMB_ADM, SMICM, SE06, STMS, Exchange Profile, SM59, RZ20 and RZ21, SLD content, SLDAPICUST and RZ70.
Thanks in advance

When in XI no adapters are visible RWB or you get the error "AE_DETAILS_GET_ERROR" I have several steps for this:

Check that all adapters are running in the Visual Administrator (under services)

Make sure the RFC's to the SLD (SAPSLDAPI) and Exchange profile (LCRSAPRFC) are maintaint correct in SM59. 
Check this also with transaction SLDcheck

Make sure the correct URL is maintaint in SXMB_ADM > Integration Engine configuration 
This should be like : http://hostname:80nr/sap/xi/engine?type=entry
Check the settings with F7.

Check the users and passwords in the ExchangeProfile. 

Check the users and passwords in SAP (check for locked users with RSUSR200). 

Check the users and passwords in the SLD if this is a standalone (check for locked users). 
Try logging on with all XI users in the useradmin of the SLD (http://hostname:5nr00/useradmin) 
Sometimes a new password must be set. You can set it directly to the old password. 

If there is a problem that not all XI components are shown in the SLD: see note 764176

If there is a problem between the function module SAI_AE_DETAILS_GET (line 241 adapaterType) and the SLD

(class browser > tab LD > XI Adapter Service : it shows AdapterType). 
In this case create a repair in the function module by editting it and transport it to the other XI systems.

Restart XI

Perform a cache refresh: 
 http://hostname:5nr00/CPACache/refresh?mode=full 
 use the XIDIRUSER user

 http://hostname:5nr00/rwb/rtc?op=init 
 use the XIRWBUSER user

 SAP transaction SXI_CACHE > start complete cache refresh (shift F6) 

Sometimes a restart of the service SAP XI AF messaging is nessesary. 
You can perform this restart via the Visual Administrator 

If all does not work: check if the content is up to date. 
Sometimes after a patchlevel upgrade, the XI basis content is forgotten. 
Importing the XI Content for Software Component Version SAP Basis 6.40 SR1: 
Copy XI3_0_SAP_BASIS_6.40_<PATCHNR>_00.tpz to directory 

/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/ 
Goto the the XI Repository (Design). 
Choose ? Tools ? Import Design Objects 
Choose the file XI3_0_SAP_BASIS_6.40_<PATCHNR>_00.tpz 
Import the file

Check if the XI services in SICF are active. 
Activate them with : SE38 > RSXMB_ACTIVATE_ICF_SERVICES 

Transaction SUPC (mass generation of roles) for all SAP_XI* roles. 
And perform a User comparison in transaction PFCG for all SAP_XI_* rolles 

User comparision (via SU01 > PISUPER > dubbelclick on each roll) 

Check the CIM content of the SLD. 
This is very intensive work. 
Check and compare with a correct running XI/PI system the content. 
SLD > Administration > Content Management 
Check and compare all components that have associasions!!! 

Perform a complete cache refresh via URL: 
http://hostname:5nr00/rep/start/index.jsp 
Administration > Repository > Cache overview 
Administration > Directory > Cache overview 
Administration > Runtime > Cache overview 

Refer to Note 1031321 "Self-Registration of Adapter Engine and RWB fails"
Best regards, 
Marco

SOAP channels in rwb showing error "No Adapters registered for this channel

SOAP channels in rwb is showing error "No Adapters registered for this channel",
what is the problem?
i tried to locate and restart the SOAP adapter from Visual admin, but couldnt find it in visual admin, pls help in locating it in visual admin

Hi,
In Visual Admin, Cluster tab --> Server -> Services -> Deploy --> Radiobutton Application
--> sap.com/com.sap.aii.af.soapadapter --> Press start / stop
This way youmay restart the SOAP adapter.
Also Please check if there is any cahce problem, Try to refresh it. & SAP Note- 856597
Thanks
Swarup

XI Installation: Adapters do not work.

Hello, All.
I can not get any adapters after Installation of SAP XI.
JPR adapter is only available in "RWB\Component monitoring\Adapter monitoring" (and it is at red state).
After clicking at JPR I can see extended information:
SLD access is in red state:
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for <SID>.SystemHome.<host> found
No access to get JPR configuration
Under "011000358700001697502004E.pdf" (Configuration Guide - SAP XI 3.0), page 47 (p. 4.1.\Testing the Cache Refresh (INTEGRATION_DIRECTORY_HMI)\7.b. Check that all cache notifications have a green status
I have got error:
"Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>"

Hello, Lalit.
Note 764176 did not help me too.
Before implementing I have configuration in RWB\Component Monitoring:
domain.nn.<host>
Integration Server
 Integration Engine <SID> (at yellow state)
 Business Process Engine <SID> (at grey state)
 Mapping Runtime <host> (at green state)
After implementing note 764176 I have got:
domain.nn.<host>
Integration Server (without subitems)
Decentralized Adapter Engine
 Adapter Engine <host> (at green state)

Error in ID while selecting Adapters for CommChannel

Hi All,
Here am getting an error in ID when i am trying to select for the Adapters under communication channel...
And also i checked in RWB for AdapterEngine there am getting a status 503 "Service Unavailable" and HTTP Request failed.
Error in RWB when i select Adapter Engine.
Message: HTTP request failed. Error code: "503". Error message: "Service Unavailable [http://ciCBP:50100/AdapterFramework/rtc]"
Stacktrace:
com.sap.aii.rwb.exceptions.RequestFailedException: HTTP request failed. Error code: "503". Error message: "Service Unavailable [http://ciCBP:50100/AdapterFramework/rtc]"
at com.sap.aii.rwb.exceptions.RequestFailedException.forHttpErrorCode(RequestFailedException.java:79)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.request(GrmgConnector.java:238)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.ping(GrmgConnector.java:69)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:206)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:583)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:298)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:372)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:388)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:339)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1212725588359._jspService(jsp_FC_Secure1212725588359.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Any suggetsions,
Thanks,
Kalyan.

Hi Zahid,
Here are the log and trc files.
*************************Application log**************************************
<!FILESET[4, 5, 10485760]/>
<!PREVIOUSFILE[applications.3.log]/>
<!NEXTFILE[applications.0.log]/>
<!LOGHEADER[END]/>
#1.5#00156004F2680083000000020000210900044F4CD57699DE#1213091324270#/Application
s/WebApplications#sap.com/vc_client#com.sap.engine.services.servlets_jsp.server.
runtime.context.ServletContextImpl#J2EE_GUEST#0####6a2318e036d211dda93e00156004f
268#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.
servlets_jsp.server.runtime.context.ServletContextImpl#Plain###ChangePasswordFor
m: destroy#
#1.5#00156004F2680083000000030000210900044F4CD5772EFD#1213091324308#/Application
s/WebApplications#sap.com/vc_client#com.sap.engine.services.servlets_jsp.server.
runtime.context.ServletContextImpl#J2EE_GUEST#0####6a2318e036d211dda93e00156004f
268#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.
servlets_jsp.server.runtime.context.ServletContextImpl#Plain###default: destroy#
#1.5#00156004F2680083000000040000210900044F4CD5772F96#1213091324308#/Application
applications.4.log (0%)
*******************************Trace file**************************************
more defaultTrace.2.trc
!LOGHEADER[START]/>
!HELP[Manual modification of the header may cause parsing problem!]/>
!LOGGINGVERSION[1.5.3.7185 - 630]/>
!NAME[./log/defaultTrace.trc]/>
!PATTERN[defaultTrace.trc]/>
!FORMATTER[com.sap.tc.logging.ListFormatter]/>
!ENCODING[ISO8859_1]/>
!FILESET[2, 20, 10485760]/>
!PREVIOUSFILE[defaultTrace.1.trc]/>
!NEXTFILE[defaultTrace.3.trc]/>
!LOGHEADER[END]/>
1.5#00156004F2680077000026CB000031CE00044F6089F3BCEF#1213175956745#com.sap.secu
ity.core.persistence.datasource.imp.R3PersistenceBase#sap.com/irj#com.sap.secur
ty.core.persistence.datasource.imp.R3PersistenceBase.populatePrincipalDatabag(A
tributeList)#J2EE_GUEST#0##ciCBP_CBP_11505750#Guest#4f3bc750379711ddc80a0015600
f268#SAPEngine_Application_Thread[impl:3]_39##0#0#Error#1#/System/Security/User
anagement#Java#An exception was thrown in the UME/ABAP user management connecto
. Message: .##An exception was thrown in the UME/ABAP user management connec
or. Message: .
EXCEPTION]
#2#Connect to SAP gateway failed
onnect_PM TYPE=A ASHOST=localhost SYSNR=01 GWHOST=localhost GWSERV=sapgw01 PCS
1
OCATION CPIC (TCP/IP) on local host with Unicode
RROR partner 'localhost:sapgw01' not reached
IME Wed Jun 11 14:49:16 2008
ELEASE 700
OMPONENT NI (network interface)
ERSION 38
C -10
ODULE nixxi.cpp
INE 2768
ETAIL NiPConnect2
Any suggestions...
Thanks,
kalyan.

Communication channel not visible in RWB

Hello everyone,
I am not able to view the communication channel in RWB. This is a HTTP sender . i have imported it but still it is not visible in RWB. what could be the reason ?
Regards,
Ravi

Hi Ravi,
In PI there are basically two types of adapter, adapter engine based and Integration engine based. Integration engine based adapters are HTTP, XI and IDOC. These adapters can be monitored from ABAP stack means from SXI_MONITOR and adapter engine based can be monitored from RWB. Due to this differentiation you HTTP adatper is not visitble in RWB. But you can monitor it from ABAP stack.
Edited by: Rajhans Abhay on Jan 18, 2012 6:06 AM

Comm Channels are not seen in the Communication Channel Monitoring in RWB

Hello All,
I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
Thanks in Anticipation
Best Regards
Chakra and Somnath

Hi,
1. Check created the Busieness system to identify your XI System.
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
2. In XI Tcode : SXMB_ADM
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Go to SXMB_ADM
Execute Integration Engine and Configuration
Click on Check button check the SLD working fine or not.
Regards,
Venu.

Adapters in RWB

Similar Messages

Maybe you are looking for