Adaptiva Software Distribution not working with Cisco APs in Local Mode

A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
Customer locations with Local WLAN AP design create problems for this new software distribution method.
The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
Our WLCs are running at 7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding. Enabling Broadcast forwarding without Reboot did not improve the situation.
Global Multicast Mode and IGMP Snooping are also of no influence.
P2P Blocking Action is "Disabled" within the WLAN setup.
Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
Thank You for answers
Wini

I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
Sent from Cisco Technical Support iPad App

Similar Messages

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

My Xlite 4.0 software does not work with Jetpack but does work with droid hotspot can this be fixed?

My Xlite 4.0 software does not work with Jetpack but does work with droidx hotspot can this be fixed? I have attached a packet capture for packets from DROIDX with android 2.3.4 marked as XliteWith3G.cap and a packet capture for Xlite with the Jet pack XliteWith4G.cap obiviously same packets coming from Xlite different results depending on WiFi connection.

Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary

My belkin play max router software does not work with Lion

Does anyone know if there will be a fix with this? My imac is only 2 months old and my router is the same age. Since upgrading to lion I have frequent dropouts and no working self-healing program. I have changed channels with some succes but it's much less reliable than pre
Thanks

Here's their reply, so the software is not compatible with Lion and no fixes in vew:
Dear customer,
Thank you for contacting Belkin Technical Support.
I understand your concern and I would certainly be happy to help you.
I regret the Inconvenience caused,
Based on the Information provided, I am afraid to state that the Belkin software doesn't support MAC OS X Lion 10.7. As there are no drivers for it. We are aware of this issue. Our Engineers are working on it. We do not have any update about the new release for MAC OS X Lion 10.7. However, will keep you updated if there's any.
Should you have any further questions, please take a moment to review our Knowledge Base at http://belkin.com/support
Please ensure that in order to reply to this email, or access any attachments, you must follow the link shown above and click 'update' at the bottom of the email to be able to respond. Do not reply to [email protected] as we will not receive your email.
Thank you,
Mousin M D
Technical Support Agent
Belkin Technical Support.

OS X Lion, will Quicken 2007 work? What other software does not work with this upgrade?

Considering upgrading to OS X Lion. DOes anyone know if it will work with Quicken2007? Or other software which it may not work? Thanks!

Quicken 07 - No
Quicken Essentials - Yes, but the milage varies
Have a look at > App Compatibility Table - RoaringApps

Why is it that Adobe CS2 software will not work with Mac OS Mountain Lion? What do I do?

Why is it that I must pay more money to upgrade my Adobe software so that it will work with Apple Mac OS Mountain Lion. Is it that Adobe wants to wring every cent out of me in order for me to use there products? Or should I just delete the Adobe software from my system and forget about Adobe and find something else?

Waynjer61 please see the system requirements for Creative Suite 2 listed at http://forums.adobe.com/thread/1195856.
The largest issue which is preventing you from utilizing Creative Suite 2 on your current computer is the switch which was made from PowerPC processors to Intel processors. This coupled with Apple dropping Rosetta support, http://en.wikipedia.org/wiki/Rosetta_(software), which previously allowed Intel processors to utilize applications coded for PowerPC processors is the main cause of Creative Suite 2 no longer functioning under newer operating systems.

Virtual IE not working with different version of local IE

I built a virtual IE9 using the template (as Novell suggests). I needed it to support a web app that is only compatible with IE9. Our environment is IE11. The main problem is that you cannot view or download any files. The IE download manager box flashes and disappears. If you're opening up any pdf or MS Office file, the new tab in IE is blank (no file is viewed). Sometimes if you download anything, it will save to local Downloads folder, but does not auto-run. Also, you cannot change the "save as" directory, nothing comes up. This only happens when running the virtual IE9 on a machine that has local IE11. If the local IE is 9, then everything works. I've also tested and noticed this happens with any version of IE, it only works when the virtual IE version matches the local IE version. Which defeats the purpose of using virtual apps if you're running it on the same environment. Has anyone had any luck with this? Thanks in advance.

I'll throw my 2 cents in here. You may be experiencing what I did. I needed
to have a totally isolated IE11 for school testing purposes. I soon
discovered that the vapp of IE interacts with the local version??? Kind of
defeats the purpose. I opened an SR and it was confirmed that this is
expected behavior. After research I was given a document last week that
explains how to totally isolate IE form the desktop. My requirements were to
have the latest JAVA and flash and to absolutely not interact with the local
version due to inconsistencies across the school systems IE installs. I made
the new build and tested on a laptop with no flash and Java and it worked
fine with the changes to the registry settings of the vapp. Below are the
settings that support had me change. Not sure if you have done this but as
for the PDF issue did you create a pdf reader SVM and add that to your vapp?
I made a JAVA and Flash SVM and added those.
here are the settings to make sure your IE is totally isolated.
Isolate Host IE Add-ons
To completely isolate all host add-ons from the virtual version of IE it is
necessary to fully isolate the registry keys where the add-ons are
referenced.
Part 1: Remove the relevant keys from the IE configuration
Delete the following registry keys (if present) from the Spoon Studio
configuration for IE.
- [HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Ext]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Curre ntVersion\Explorer\Browser
Helper Objects]
- [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Explorer\Browser
Helper Objects]
Part 2: Import the isolation registry keys
Import the attached registry file into the configuration
(isolate-ie-plugins.reg).
Part 3: Set the keys to full isolation
Set the following keys to full isolation.
- [HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Ext]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Curre ntVersion\Explorer\Browser
Helper Objects]
- [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Explorer\Browser
Helper Objects]
Part 4: Build and test the IE package
Build the Spoon Studio IE configuration and test it on a machine that has IE
plugins installer. Verify that the plugins are not loaded.
You need to make a reg file out of this and import it per above
instructions. Copy and paste it into a text file then change the extension
to .reg.
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Ext]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Curre ntVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Explorer\Browser
Helper Objects]
"katiefinn" wrote in message
news:[email protected]...
I built a virtual IE9 using the template (as Novell suggests). I needed
it to support a web app that is only compatible with IE9. Our
environment is IE11. The main problem is that you cannot view or
download any files. The IE download manager box flashes and disappears.
If you're opening up any pdf or MS Office file, the new tab in IE is
blank (no file is viewed). Sometimes if you download anything, it will
save to local Downloads folder, but does not auto-run. Also, you cannot
change the "save as" directory, nothing comes up. This only happens when
running the virtual IE9 on a machine that has local IE11. If the local
IE is 9, then everything works. I've also tested and noticed this
happens with any version of IE, it only works when the virtual IE
version matches the local IE version. Which defeats the purpose of using
virtual apps if you're running it on the same environment. Has anyone
had any luck with this? Thanks in advance.
katiefinn
katiefinn's Profile: https://forums.novell.com/member.php?userid=131771
View this thread: https://forums.novell.com/showthread.php?t=482841

Sleep not working with external screen in clamshell mode

I have my macbook with Lion operating in clamshell mode with an external display connected as the main screen.
Although I have set the computer to sleep after 10mins, this never happens and I have to sleep the computer manually every time.
If I disconnect the external display, or open my Mac and work with both screens, the computer does sleep properly after the set time.
I can't seem to find the fix anywhere, and the people in the mac store couldn't help me either.
Can anyone help please?
Thx,

How to disable the closed-clamshell mode?
I think, this is what you're looking for ... maybe you want to uproot that question.

HT1338 Software update not working with snow leopard 10.6.8

When I try to update snow leopard 10.8.6 through the Software update, it launches but crashes with the message Software Update can't check for updates because of a network problem. Software Update can’t connect to the update server. But I do have internet connection. If I try to update from the terminal with the command " sudo softwareupdate -i -r, it tries to connect but end up with connection timed out. I have never able to update my system with software update utility. Does anybody have any suggestion?

Hi,
This reply may seem late but might as well share my findings.
I have the same problems with the software updater for 10.6.8 as well after trying to move on to Mavericks from
OS X Leopard 10.6.8.
Tried the patch as well the listed files to delete and etc but all failed.
Then I noticed the problem was with the software updater complaining that there was a network problem and even though the dignostics was run the results were no network connection exists but Air Port is connected and there is no issue browsing the web.
I took a look at the Wi-Fi settings and noticed that the default locations were going back to an old Wi-Fi network location I had latched on to 4 years ago! I assumed some screw up with the Wi-Fi network software and thus removed all Wi-Fi network associations and locations and reconfigured the Wi-Fi from scratch for my local home Wi-Fi network. After this the software update worked fine and can now download updates. Note that I did install the update patch by Apple though in my first attempt to resolve the problem.
I would consider the possibility of the Wi-Fi software services within OS X Snow Leopard being a bit "buggy".
Deleting all the non used Wi-Fi network associations and clearing or resetting the default location settings helped revive/resolve the no network connection problem with the software updater.
Now can move on to Mavericks...

Cisco 3650 not working with Cisco 8831 Conference IP phone

hi all,
i'm not a fan of 3650 switch as it's giving me problems.
the 3650 can CDP and HTTP to 8831 but CUCM says "not registered."
the 8831 works fine with 3560 and can register to our CUCM.
just want to know if 3650 supports 8831?
can't seem to see any docu or links.

I have the same issue, changed the 3650 IOS-XE to many versions with no luck.

New fingerprint software is not working with IE8 and FF3

I have downloaded the latest version but it still does not resolve the issues with IE8 and FF3...
Please, Please...
Fix the main issue of the software unable to save website login details with Internet Explorer 8+ and Firefox 3+
Thanks
Stewart Grainger

Hello
I am pretty sure they know about this issue and software companies must not hear what the people say. For me it is logic that they watch what happen on the software market and try to adapt own products as soon as possible.
This issue with IE8 is known and soon or later the updated version will be offered on download page but the question is: when?
I cannot understand why they wait so long time. OK, to fix some issue and testing procedure can take a days but IE8 is not on the market from yesterday.
Lets see how long it will be necessary for AuthenTec to fix this issue.

Mobile Printer ( Zebra RW420 ) Not Working with Cisco AP

Good Morning everyone,
In cold area -3 inside a warehouse I am trying to connect a mobile printer ( Zebra RW420 ) to cisco access points of model AIR-LAP1242AG-A-K9 and AIR-LAP1252AG-E-K9 which are woking through WLAN controlar version 6.0.202.0 ,the mobile printer is connecting to cisco AP but shown without IP address , where the IP is configured static , since it's connectiong and working fine with motorola AP .
after upgrading the firmware of mobile printer, I faced the same issue in dry area.
Any ideas please ?

Hi Leo ,
Kindly find the below results :-
(WiSM-slot4-2) >show interface detailed label
Interface Name................................... label
MAC Address...................................... c4:7d:4f:bd:d4:4b
IP Address....................................... 10.161.20.123
IP Netmask....................................... 255.255.255.128
IP Gateway....................................... 10.161.20.126
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. 502
Quarantine-vlan.................................. 0
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
(WiSM-slot4-2) >debug client 00:15:70:21:8a:34
(WiSM-slot4-2) >*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Association received fro
m mobile on AP 00:1a:e3:01:84:e0
*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Applying site-specific IPv6 override for
station 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Applying IPv6 Interface Policy for stati
on 00:15:70:21:8a:34 - vlan 502, interface id 12, interface 'label'
*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Applying site-specific override for stat
ion 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Changing ACL 'none
' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1276)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 STA - rates (4): 2 4 11 22 0 0 0 0 0 0 0
0 0 0 0 0
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Deleted mobile LWA
PP rule on AP [68:ef:bd:2e:7a:10]
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 Updated location for station old AP 68:e
f:bd:2e:7a:10-0, new AP 00:1a:e3:01:84:e0-0
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Change state to ST
ART (0) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 START (0) Initializing policy
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 START (0) Change state to AUTHCH
ECK (2) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 AUTHCHECK (2) Change state to L2
AUTHCOMPLETE (4) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobil
e LWAPP rule on AP 00:1a:e3:01:84:e0 vapId 6 apVapId 1
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Change state
to DHCP_REQD (7) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) pemApfAddMobileSta
tion2 2514, Adding TMP rule
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Adding Fast Path r
ule
type = Airespace AP - Learn IP address
on AP 00:1a:e3:01:84:e0, slot 0, interface = 29, QOS = 0
ACL Id = 255, Jumbo F
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Successfully plumb
ed mobile rule (ACL ID 255)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) pemApfAddMobileSta
tion2 2630, Adding TMP rule
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Replacing Fast Pat
h rule
type = Airespace AP - Learn IP address
on AP 00:1a:e3:01:84:e0, slot 0, interface = 29, QOS = 0
ACL Id = 255, Jumb
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Successfully plumb
ed mobile rule (ACL ID 255)
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 apfPemAddUser2 (apf_policy.c:213) Changi
ng state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Associated to
Associated
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station:
(callerId: 49) in 1800 seconds
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 Sending Assoc Response to station on BSS
ID 00:1a:e3:01:84:e0 (status 0) Vap Id 1 Slot 0
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 apfProcessAssocReq (apf_80211.c:4391) Ch
anging state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Associate
d to Associated
*Dec 24 10:14:44.582: 00:15:70:21:8a:34 0.0.0.0 Removed NPU entry.
*Dec 24 10:14:44.586: 00:15:70:21:8a:34 0.0.0.0 Added NPU entry of type 9, dtlFl
ags 0x0
(WiSM-slot4-2) >*Dec 24 10:14:44.591: 00:15:70:21:8a:34 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*Dec 24 10:16:44.550: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*Dec 24 10:16:44.550: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.
*Dec 24 10:16:44.550: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 12) in 10 seconds
*Dec 24 10:16:54.550: 00:15:70:21:8a:34 apfMsExpireCallback (apf_ms.c:418) Expiring Mobile!
*Dec 24 10:16:54.551: 00:15:70:21:8a:34 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Associated to Disasso
ciated
*Dec 24 10:16:54.551: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*Dec 24 10:17:04.550: 00:15:70:21:8a:34 apfMsExpireCallback (apf_ms.c:418) Expiring Mobile!
*Dec 24 10:17:04.551: 00:15:70:21:8a:34 Sent Deauthenticate to mobile on BSSID 00:1a:e3:01:84:e0 slot 0(caller apf_ms.c:4511)
*Dec 24 10:17:04.552: 00:15:70:21:8a:34 apfMsExpireMobileStation (apf_ms.c:4548) Changing state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Disassociated to Idle
*Dec 24 10:17:04.552: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [00:1a:e3:01:84:e0]
*Dec 24 10:17:04.552: 00:15:70:21:8a:34 Deleting mobile on AP 00:1a:e3:01:84:e0(0)
*Dec 24 10:17:04.555: 00:15:70:21:8a:34 0.0.0.0 Removed NPU entry.
*Dec 24 10:17:04.568: 00:15:70:21:8a:34 Adding mobile on LWAPP AP 00:1a:e3:01:84:e0(0)
*Dec 24 10:17:04.568: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 23) in 5 seconds
*Dec 24 10:17:04.568: 00:15:70:21:8a:34 apfProcessProbeReq (apf_80211.c:4761) Changing state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Idle to Probe
*Dec 24 10:17:04.788: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 24) in 5 seconds
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Association received from mobile on AP 68:ef:bd:2e:7a:10
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Applying site-specific IPv6 override for station 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Applying IPv6 Interface Policy for station 00:15:70:21:8a:34 - vlan 502, interface id 12, interface 'label'
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Applying site-specific override for station 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1276)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 STA - rates (4): 2 4 11 22 0 0 0 0 0 0 0 0 0 0 0 0
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [00:1a:e3:01:84:e0]
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Updated location for station old AP 00:1a:e3:01:84:e0-0, new AP 68:ef:bd:2e:7a:10-0
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Initializing policy
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 68:ef:bd:2e:7a:10 vapId 6 apVapId 1
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 apfPemAddUser2 (apf_policy.c:213) Changing state for mobile 00:15:70:21:8a:34 on AP 68:ef:bd:2e:7a:10 from Probe to Associated
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 49) in 1800 seconds
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Sending Assoc Response to station on BSSID 68:ef:bd:2e:7a:10 (status 0) Vap Id 1 Slot 0
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 apfProcessAssocReq (apf_80211.c:4391) Changing state for mobile 00:15:70:21:8a:34 on AP 68:ef:bd:2e:7a:10 from Associated to Associated
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCI
ATED
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4181, Adding TMP rule
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP 68:ef:bd:2e:7a:10, slot 0, interface = 29, QOS = 0
ACL Id = 255, Jumbo F
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
*Dec 24 10:17:06.756: 00:15:70:21:8a:34 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*Dec 24 10:17:06.756: 00:15:70:21:8a:34 Sent an XID frame

Why does my mac not work with cisco E3000 router

It says that it needs os x 10.6.1 or later and I have that and its not working

Ask Cisco, but:
Internet Quick Assist:
http://support.apple.com/kb/HT1144?viewlocale=en_US
Troubleshooting internet settings:
http://support.apple.com/kb/HT1714?viewlocale=en_US

ISight not working with Webex, GoToMeeting or Lync...BUT works with Skype, Facetime, Photobooth (June 2013 MBA)

Brand new MacBook Air (June 2013, 8MB RAM, 500GB SSD)
iSight not working with Cisco Webex, Citrix GoToMeeting or Microsoft Lync (error = webcam not detected); BUT iSight works with Skype, Facetime and Photobooth.
3 hours of phone support with Webex - no luck.
Tried SMC and PRAM reset - no luck.
Tried erasing disk and reinstalling OSX 10.8.4 and apps manually with latest versions - no luck.
Apple phone support says it's not Apple's problem because Apple apps work.
Exchanged at Apple Store for another new MacBook Air, again installed apps manually with latest version (not from time machine) - STILL NO LUCK!!!
Is there an update Apple or Cisco, Citrix and Microsoft need to put out for the new MBAs or do I just have 2 lemons???

You're welcome.
1wave wrote: ... an external webcam which might be a cheaper alternative ...
It will be interesting to see what the vendors say about using a Mac-compatible external webcam.
If not, some netbook or other Windows® device might offer compatibility at a much lower cost than a compatible Apple notebook.
We will watch for your update(s). What the vendors tell you will be very helpful to others who share this or similar issues with their new MBAs.
Message was edited by: EZ Jim
Mac OSX 10.8.4

McAfee is not working with OS x 10.10.1 - do I need it

OS X Yosemite Version 10.10.1
I have an iMac (27 inch, Mid 2011)
Processor 2.7 GHz Intel Core i5
Memory 4GB 1333 MHz DDR3
Start up Disk Macintosh HD
Graphics AMD Radeon HD 6770M 512MB
This is my 1st posting for help, so please excuse me if I am not following the correct procedures. Yesterday I installed the latest update for Yosemite and at the end of the process I was advised that the McAfee security software would not work with the update 10.10.1. My question is do I need McAfee, or does my iMac have it's own Firewall and other security systems already in place. I would welcome any recommendations on alternative security packages, that members use, if they are working with this latest update.

Hi All... Long time Apple user and have enjoyed many many years without a thought about malware, virus' and trojans. However as this dialog progresses I would like to share an unfortunate reality... Life was fine and then one day my MacBook Pro started to labor when opening apps/managing multiple documents/etc.. the spinning wheel - and when I pulled up the option to Force Quit - each time it would show me that one or another of my apps was 'unresponsive'. (when I did not force quit the app - it did finally become responsive after a number of minutes) Next... noticed two things; at the same time that a mac app was unresponsive - the fan in my macbook was kicked into overdrive... and the casing above the keyboards had become super hot. Researched the issue that pointed me to the possibility of malware... Chose then what was best option McAfee to scan my computer.... and yes you guessed it - two cases of malware and a trojan. McAfee put them in 'quarantine' and I restarted my laptop... Like magic - no unresponsive apps - the fans were calm and the case was no longer excessively hot. This was great for about a month and then it happened again... ran the scan (with McAfee and Sophos) and found a new case of malware that was found in my email database and dated as received that day - once the virus was quarantined - my macbook was happy again. Now I run realtime virus scanner - seems like about 3-5 weeks and something will show up and - 99.9% time imbedded within an email - but computer is running as it should fast, cool and quiet.

Adaptiva Software Distribution not working with Cisco APs in Local Mode

Similar Messages

Maybe you are looking for