Adaptive agent install failure

Hi,
I have been attempting to install the adaptive agent for Zen 11.2 onto workstations that have been removed from a microsoft domain.
The full install starts and everything is completes until it fails at 100% on setup.exe.
If the install is successful a reboot message is displayed.
This only seems to effect workstations that at some point have been connected to a ms domain. The novell client is installed without any errors.
The only thing I can think of is some group policy is being enforced(left behind) that effects the agent installation process.
Any idea's?
Thanx
Julian

Hi,
How did you install the agent? It seems like that you have installed the agent on the computer.
Please first remove the agent from the computer, and then run discovery wizard with operation console.
Regards, Yan Li

Similar Messages

  • Hung installing Adaptative Agent in RHEL Virtualized

    Hello,
    I have a RHEL virtualized over Citrix xen, when I try to deploy de Zenworks Adaptative Agent, It is installed correctly but the task hang up when the device try to do the registration step. Checking the logs I can see a message that say "Device OS target not supported!".
    I am thinking that when the server reply to the Zenworks server, it show itshelf like a kernel version "2.6.18-194.el5xen" and not recognize the os version.
    Is this possible??
    Thanks in advance,
    Ricard Alias

    In the adaptative client logs I can see:
    [root@hongkong LocalStore]# tail -f /var/opt/novell/zenworks/logs/LocalStore/zmd-messages.log
    [Debug] [10/20/2011 08:42:14.450] [] [5778] [ZenworksAgent] [34] [WebServerMonitor] [Checking if web server is responding] [] []
    [Debug] [10/20/2011 08:42:14.453] [] [5778] [ZenworksAgent] [34] [WebServerMonitor] [Successfully pinged the agent web server at port: 7628] [] []
    [Debug] [10/20/2011 08:42:19.746] [] [5778] [ZenworksAgent] [51] [ConfigManager] [Could not find any registered config handlers.] [] []
    [Debug] [10/20/2011 08:42:19.747] [] [5778] [ZenworksAgent] [51] [ReportAnalyzeModule] [CollectionPointEnabled config value: null] [] []
    [Debug] [10/20/2011 08:42:19.747] [] [5778] [ZenworksAgent] [51] [ReportAnalyzeModule] [IsCollectionPoint returning: false] [] []
    [Debug] [10/20/2011 08:42:24.884] [] [5778] [ZenworksAgent] [36] [TESS-JobExecutor] [Executing job: DEFAULT.3f965b73-479c-4eb1-bbd6-2bb0ccee1dc4, In Blackout: false] [] []
    [Debug] [10/20/2011 08:42:24.884] [] [5778] [ZenworksAgent] [36] [MessageSender] [CentralStoreLocation :/var/opt/novell/zenworks/logs/CentralStore] [] []
    [Debug] [10/20/2011 08:42:24.884] [] [5778] [ZenworksAgent] [36] [MessageSender] [Sorted Files] [] []
    [Debug] [10/20/2011 08:42:25.404] [] [5778] [ZenworksAgent] [37] [TESS-JobExecutor] [Executing job: DEFAULT.376e17a2-0204-44fb-8cf5-89e35a8ea42d, In Blackout: false] [] []
    [Debug] [10/20/2011 08:42:25.455] [] [5778] [ZenworksAgent] [37] [ExternalCmd] [Executed command (sh, -c, export LANG=en_US.UTF-8;/sbin/ifconfig) : exit value = 0, error = none.] [] []
    [Debug] [10/20/2011 08:42:25.456] [] [5778] [ZenworksAgent] [37] [LinuxSystemUtils.BasicHWInfo] [Adding Ip Address 192.168.160.56 for N/w Interface eth0] [] []
    [Debug] [10/20/2011 08:42:25.457] [] [5778] [ZenworksAgent] [37] [NwIfInfoChangeDetectorByPolling] [Polling the network interfaces : time taken : 53 ms.] [] []
    I tried to chage /etc/redhat-release by "rhel-5" and reinstall de agent with the same result.
    Regards,
    Ricard Alias
    Originally Posted by craig_wilson
    The ostargets.XML file lists all of the supported operating systems.
    It will try and find a matching sub-string there.
    In my Server I see
    Red Hat Enterprise Linux Server release 5
    and
    Red Hat Enterprise Linux Server release 6
    I don't see a 5.5
    Now, It don't know if 5.5 SHOULD match because of the substring notation
    I don't know if it needs to be added to the supported list.
    I don't know if it would need extra testing to be added to the supported
    list.
    I'm not enough of an Expert on Linux to make a sound judgement beyond
    the details above.
    On 10/19/2011 10:36 AM, ralias wrote:
    >
    > Hello Craig,
    >
    > I can see this:
    >
    > [root@hongkong ~]# cat /etc/redhat-release
    > Red Hat Enterprise Linux Server release 5.5 (Tikanga)
    >
    > Thanks in advance,
    > Ricard Alias
    >
    >
    > craig_wilson;2147198 Wrote:
    >> What is the value of /etc/redhat-release
    >>
    >>
    >> On 10/19/2011 9:16 AM, ralias wrote:
    >>>
    >>> Hello,
    >>>
    >>> I have a RHEL virtualized over Citrix xen, when I try to deploy de
    >>> Zenworks Adaptative Agent, It is installed correctly but the task
    >> hang
    >>> up when the device try to do the registration step. Checking the logs
    >> I
    >>> can see a message that say "Device OS target not supported!".
    >>>
    >>> I am thinking that when the server reply to the Zenworks server, it
    >>> show itshelf like a kernel version "2.6.18-194.el5xen" and not
    >> recognize
    >>> the os version.
    >>>
    >>> Is this possible??
    >>>
    >>> Thanks in advance,
    >>> Ricard Alias
    >>>
    >>>
    >>
    >>
    >> --
    >> Craig Wilson - MCNE, MCSE, CCNA
    >> Novell Knowledge Partner
    >>
    >> Novell does not officially monitor these forums.
    >>
    >> Suggestions/Opinions/Statements made by me are solely my own.
    >> These thoughts may not be shared by either Novell or any rational
    >> human.
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • SCOM agent install fails Error 80070035 - the network path was not found

    I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
    Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
    So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
    The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
    I added a specific rule to allow TCP 5723 and 5724
    DCOM is enabled
    I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
    I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
    did install to) and the server has plenty of disk space available
    I am not sure what else to look at so would welcome any ideas
    Thanks

    Hi Petro,
    I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
    So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
    Also check if your agents have the WMI service started and enabled ?
    Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
    Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
    Component A
    Component B
    Minimum Requirement
    Root management server or management server
    Agent
    64 Kbps
    Root management server or management server
    Agentless
    1024 Kbps
    Root management server or management server
    Database
    256 Kbps
    Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
    Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
    Also post the event logs of the Agents which are in not monitored state for analysis.
    SCOM Agent installation failure error codes
    Error
    Error Code(s)
    Remediation Steps
    The MOM Server could not execute WMI Query "Select * from Win32_Environment where
    NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
    Operation: Agent Install
    Install account: domain\account
    Error Code: 80004005
    Error Description: Unspecified error
    80004005
    1.  Check the PATH environment variable.  If the PATH statement is very long, due to lots of installed third party software - this can
    fail.  Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
    2.  The cause
    could be corrupted Performance Counters on the target Agent.
    To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
    prompt. Press ENTER after each command.
    cd
    \windows\system32
    lodctr /R
    Note /R is uppercase.
    Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
    How to manually rebuild Performance Counter Library values
    http://support.microsoft.com/kb/300956
    3.  Manual agent install. 
    The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
    computer “servername.domain.com”
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    8004100A
    800706BA
    1.  Ensure agent push account has local admin rights
    2.  Firewall is blocking NetBIOS access
    3.  Inspect WMI health and rebuild repository if necessary
    4.  Firewall is blocking ICMP  (Live OneCare)
    5.  DNS incorrect
    The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
    Operation: Agent Install
    Install account: DomainName\User Account
    Error Code: 80070005
    Error Description: Access is denied.
    80070005
    80041002
    1.  Verify SCOM agent push account is in Local Administrators group on target computer.
    2.  On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
    Disable McAfee antivirus during push
    The MOM Server failed to open service control manager on computer "servername.domain.com".
    Therefore, the MOM Server cannot complete configuration of agent on the computer.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    800706BA
    1.  Firewall blocking NetBIOS ports
    2.  DNS resolution issue.  Make sure the agent can ping the MS by NetBIOS and FQDN.  Make sure the MS can ping the agent by NetBIOS
    and FQDN
    3.  Firewall blocking ICMP
    4.  RPC services stopped.
    The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
    on this computer, please retry the Push Agent operation after some time.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 80072971
    Error description: Unknown error 0x80072971
    80072971
    This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
    %windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
    When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
    of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
    if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
    the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
    http://support.microsoft.com/kb/934760/en-us
    The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
    agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Remote Computer Name: servername.domain.com Install account: DOMAIN\account
    Error Code: C000296E
    Error Description: Unknown error 0xC000296E
    C000296E
    1.  Netlogon service is not running.  It must be set to auto/started
    The MOM Server detected that the following services on computer
    "winmgmt;(null)" are not running
    C000296E
    1.  WMI services not running or WMI corrupt
    The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
    required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: C0002976
    Error Description: Unknown error 0xC0002976
    C0002976
    1.  Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
    The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
    Install account: DOMAIN\account
    Error Code: 80070643
    Error Description: Fatal error during installation.
    Microsoft Installer Error Description:
    For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
    C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
    80070643
    1.  Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
    Call was canceled by the message filter
    80010002
    Install latest SP and retry. One server that failed did not have Service pack installed
    The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
    share exists.
    80070006
    1.  Manual agent install
    Possible locking on registry?
    http://www.sysadmintales.com/category/operations-manager/
    Try manual install.
    Verified share does not exist.
    The network path was not found.
    80070035
    1.  Manual agent install
    The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
    80070070
    1.  Free space on install disk
    The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
    80070079
    NSlookup failed on server. Possible DNS resolution issue.
    Try adding dnsname to dnssuffix search list.
    The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
    8007041D
    80070102
    NSlookup failed on server. Possible DNS resolution issue.
    Verify domain is in suffix search list on management servers.
    The Agent Management Operation Agent Install failed for remote computer "name"
    80070643
    1.  Ensure automatic updates service is started
    2.  Rebuild WMI repository
    3.  DNS resolution issue
    The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
    80070652
    Verify not in pending management. If yes, remove and then attempt installation again.
    The MOM Server detected that computer "name" has an unsupported operating system or service pack version
    80072977
    Install latest SP and verify you are installing to Windows system.
    Not discovered
    Agent machine is not a member of domain
    Ping fails
    1.  Server is down
    2.  Server is blocked by firewall
    3.  DNS resolving to wrong IP.
    Fail to resolve machine
    1.  DNS issue
    The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
    8007046A
    1.  This is typically a memory error caused by the remote OS that the agent is being installed on.
    There are currently no logon servers available to service the logon request.
    8007051F
    1.  Possible DNS issue
    This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
    of the Windows Installer service.
    8007064D
    1.  Install Windows Installer 3.1
    The network address is invalid
    800706AB
    Possible DNS name resolution issue.
    Tried nslookup on server name and did not get response.
    Verify domain is in suffix search list on management servers.
    The MOM Server failed to perform specified operation on computer servername.domain.com
    80070040
    1.  Ensure agent push account has local admin rights
    The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
    80072979
    1.  Correct DNS/WINS issue.
    2.  Try pushing to NetBIOS name
    Gautam.75801

  • 12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

    Hi,
    I am trying to install 12c agent on windows 7 64 bit server by following m.note   .
    It is failing with Agent Configuration failed, please see below error message.
    INFO: length of temp is2
    INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
    INFO: ** Agent Port Check completed successfully.**
    INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
    INFO:
    INFO: perform - mode finished for action: configure
    INFO:
    INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
    INFO:
    INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
    INFO: Plugin homes:
    INFO: Plugin homes:
    INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
    SEVERE: ERROR: Agent Configuration Failed
    Thanks,

    Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
    -If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
    or if the system is part of some n/w group and has ip address assigned ?
    -Jdk 1.4 version is installed in your system
    -Enough free Disk space available in the system
    -How much RAM your system has which windows version you are using  ?
    -Is the DB is coming up properly ? its error related to this. check the logs.
    -If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
    Pls. update with your findings on above same , for the step next ...
    Thanks ,
    Uppal

  • DPM 2010 agent install on W2k8 Domain Controller issue

    Hey guys, so I'm having a problem getting DPM 2010 agents on my Windows 2008 domain controllers. For some reason the agent will not communicate with the dpm server after running the attach process. The process I go through to install (which is
    working in my Dev environment) is
    1) (on DC) Run manual agent install by running agent.exe file from ProtectionAgents folder on DPM server
    2) (on DC) Run the setdpmserver command line to specify the DPM server
    3) (on specified DPM server) Run Agent attach sequence from Agent tabs in DPM console which says successful, but when you return to agents view under "unprotected computers" I see error.
    I've verified the tests that other users have posted on this forum including
    PING, DCOM permissions, verifying that inbound rules are setup, tested SMB, tested RPC, and also uninstalled and reinstalled the agent. Any ideas where to search next?

    I checked the MSDPMCurr.errlog, but I'm not exactly sure how to look for the failures that relate to the DC. When I search for the netbios name of the DC, I can see failures, but I also see identical failures under other server names as well. Is there anything
    specifically I should be looking for?
    I am requesting turning off the integrated firewall for testing as well and am awaiting an answer.
    I am attaching part of the log I was looking at.
    tance.cs(253)   NORMAL </TECommand>' Error CmdProcAccessDenied
    0BE8 10E4 06/14 18:00:03.425 07 AMUtil_expanded.cs(3474)  BF90214B-F6C3-40B9-B53E-C6DC0A0235DF WARNING CheckTimeoutMessage: code[0x00000101], detailedCode[0x80070005], errMgs[Access is denied (0x80070005)]
    0BE8 10E4 06/14 18:00:03.425 07 AMUtil_expanded.cs(3474)  BF90214B-F6C3-40B9-B53E-C6DC0A0235DF WARNING [<?xml version="1.0" encoding="utf-16"?>
    0BE8 10E4 06/14 18:00:03.425 07 AMUtil_expanded.cs(3474)  BF90214B-F6C3-40B9-B53E-C6DC0A0235DF WARNING <Status xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" StatusCode="-2147024891" Reason="Timeout" CommandInstanceID="cb3dbc9c-b7fe-4df0-8dcd-c93baacae403" CommandID="GetProperties" GuidWorkItem="bf90214b-f6c3-40b9-b53e-c6dc0a0235df"
    TETaskInstanceID="bf90214b-f6c3-40b9-b53e-c6dc0a0235df" xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd">
    0BE8 10E4 06/14 18:00:03.425 07 AMUtil_expanded.cs(3474)  BF90214B-F6C3-40B9-B53E-C6DC0A0235DF WARNING   <ErrorInfo ErrorCode="257" DetailedCode="-2147024891" DetailedSource="2" ExceptionDetails="" xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd">
    0BE8 10E4 06/14 18:00:03.425 07 AMUtil_expanded.cs(3474)  BF90214B-F6C3-40B9-B53E-C6DC0A0235DF WARNING     <Parameter Name="servername" Value="la-exchmbclu02.caa.com" />
    0BE8 10E4 06/14 18:00:03.425 07 AMUtil_expanded.cs(3474)  BF90214B-F6C3-40B9-B53E-C6DC0A0235DF WARNING   </ErrorInfo>
    0BE8 10E4 06/14 18:00:03.425 07 AMUtil_expanded.cs(3474)  BF90214B-F6C3-40B9-B53E-C6DC0A0235DF WARNING </Status>].
    0BE8 1194 06/14 18:00:03.426 04 cmdproc.cpp(2017) [000000001A62B200] C79F322F-BCB7-40BE-92D2-03D6E85EAAA5 WARNING Failed: Hr: = [0x80070005] : F: lVal : hr
    0BE8 1194 06/14 18:00:03.426 04 cmdproc.cpp(1816) [000000001A62B200] C79F322F-BCB7-40BE-92D2-03D6E85EAAA5 WARNING Failed: Hr: = [0x80070005] : C: lVal : hr
    0BE8 1194 06/14 18:00:03.426 04 cmdproc.cpp(2242) [000000001A62B200] C79F322F-BCB7-40BE-92D2-03D6E85EAAA5 WARNING Failed: Hr: = [0x80070005] : F: lVal : CreateInstance( strCmdTarget, clsidTarget, hrDLS, (IUnknown
    **)&pAgentCommand, (pCommand->GetSenderToken() == 0), pCommand->IsNonDomainAgent(), fIsNonADMachine, cmdTargetIP )
    0BE8 1194 06/14 18:00:03.426 04 cmdproc.cpp(2482) [000000001A62B200] C79F322F-BCB7-40BE-92D2-03D6E85EAAA5 WARNING CCommandProcessor::SendOutboundCommand this:[000000001A62B200], ServerName: dc2-01.domain.com
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL Task: Received tiemout message from CmdProc '<?xml version="1.0" encoding="utf-16"?>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL <TECommand xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns="http://schemas.microsoft.com/2003/dls/Commands.xsd">
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL   <Command xmlns="http://schemas.microsoft.com/2003/dls/GenericCommand.xsd">
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL     <CommandInstanceID>80be8b52-30e1-4d12-bb3f-65c50676ffce</CommandInstanceID>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL     <AgentTypeID>da6aa17a-d61c-4e9c-8cea-db25dea52a95</AgentTypeID>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL     <WorkItemID>c79f322f-bcb7-40be-92d2-03d6e85eaaa5</WorkItemID>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL     <TETaskInstanceID>c79f322f-bcb7-40be-92d2-03d6e85eaaa5</TETaskInstanceID>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL     <ServerIdFilter>00000000-0000-0000-0000-000000000000</ServerIdFilter>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL     <VerbIndexFilter>45</VerbIndexFilter>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL     <DatasourceIndexFilter>0</DatasourceIndexFilter>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL   </Command>
    0BE8 1170 06/14 18:00:03.426 01 TaskInstance.cs(253)   NORMAL   <GetProperties />

  • 11g Install Failure, Listener Error.

    11g Install Failure, Listener.
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor.
    I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
    The box is at present not networked and as is not on a domain. The computer name is homedb.
    I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
    Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
    Enterprise manager configuration failed due to the following error -
    Listener is not up. Start the listener and run EM configuration again.
    Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
    You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
    When I click ok on the error message the install completes as normal.
    I can TNSPING orcl which results in the following:
    TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
    008 12:36:33
    Copyright (c) 1997, 2007, Oracle. All rights reserved.
    Used parameter files:
    C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
    PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
    OK (20 msec)
    I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
    sqlplus sys@orcl and typing in the password I get the following error:
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor.
    This is also the error I get when using sql developer to connect to the db.
    The extract from the log file mentioned above is as follows:
    20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
         at java.lang.Thread.run(Thread.java:595)
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
    Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
         at java.lang.Thread.run(Thread.java:595)
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
    My listener, tnsnames and sqlnet are as follows:
    listener.ora:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
    sqlnet.ora:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    tnsnames.ora:
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
    Running the command: lsnrctl service, results in the following:
    LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
    :52
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    The listener supports no services
    The command completed successfully.
    Running lsnrctl status results in the following:
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
    ction
    Start Date 20-JAN-2008 12:09:10
    Uptime 0 days 0 hr. 40 min. 9 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
    ra
    Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
    All firewalls and anti virus software have been disabled for the purposes of this install.
    Do I need to manually register the listener with the database, if so how do I go about doing this?
    I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

    To answer my own question I fixed this by issuing the command
    netsh winsocks reset
    Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
    Hope that helps,
    Adam

  • DPM 2012 Protection Agent Connection Failure

    I was successfully protecting a Windows Server 2008 R2 Ent. Server with my M.S. System Center 2012 R2 DPM R2 Server until today.  The only changes I know about are the fact that this 2008 server was promoted to a domain controller today using the same
    name and I.P. Address.  It appears that the DCPromo process has broken DPM protection somehow.  Is it true that a "dcpromo" of a protected server can cause DPM Agent failures?  If so what is the preferred method to fix this problem. 
    I'm hoping that I don't really have to stop and clean up the current protection for this server and then start over again.  Does anyone have a solution for this problem?  Here are the errors I'm getting:
    Affected area: ServerName.DomainName
    Occurred since: 1/13/2015 8:30:02 AM
    Description: The DPM protection agent on ServerName.DomainName could not be contacted. Subsequent protection activities for this computer may fail if the connection is not established. The attempted contact failed for the following reason: (ID 3122)
    The protection agent operation failed because it could not access the protection agent on ServerName.DomainName. ServerName.DomainName may be running DPM, or the DPM protection agent may have been installed by another DPM server. (ID 302 Details: )
    More information
    Recommended action: Uninstall DPM or the DPM protection agent from ServerName.DomainName and install the DPM protection agent again from the computer that you want to use to protect the computer.
    On the Agents tab in the Management task area, check the status of the agent.
    Resolution: To dismiss the alert, click below
    Inactivate
    Protection agent version: 4.2.1254.0
    Error: Data Protection Manager Error ID: 270
    The agent operation failed on ServerName.DomainName because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
    If ServerName.DomainName is a workgroup server, the password for the DPM user account could have been changed or may have expired.
    Recommended action: Check the following to troubleshoot this issue:
    1) If the agent is not installed on ServerName.DomainName, run DpmAgentInstaller.exe with this DPM computer as a parameter. For details, see the DPM Deployment Guide.
    2) To attach the computer correctly to this DPM server, run the SetDpmServer tool with the -Add option on the protected computer.
    3) If the computer is protected by another DPM server, or if the protection agent has been uninstalled, remove the protected data sources on this computer from active protection. Then, remove the entry of this computer from the Agents tab in the Management
    task area.
    4) If ServerName.DomainName is a workgroup server, run SetDpmServer with the -UpdatePassword flag on the protected computer and Update-NonDomainServerInfo.ps1 on the DPM server to update the password.
    5) If the DPM server and the protected computer are not in the same domain, ensure that there is a two-way trust setup between the two domains.
    Note:  I tried running the setdpmserver tool but got the following message:
    SetDpmServer failed with errorcode =0x80070534, error says: No mapping between account names and security IDs was done.
    I also tried the attach agents option but DPM tells me that there is already an agent installed.
    I also tried to manually start the DPMRA service on the client but it fails with error code 1168.
    Any helpfull information would be greatly appreciated. 
    Thank you,
    MPeterson 

    Hi,
    Try the following:
    Uninstall the agent from the protected computer.
    Restart the computer.
    Install the DPM-agent manually.
    Re run the SetDPMServer command.
    Try start the service.
    If the problem still exist, please look into the following steps:
    Verify the COM+ permissions for the DPM agent on the protected server. There could be a mismatch in the permissions:
    Click START / Administrative Tools / Component Services
    Expand Component Services / Computers / My Computer / DCOM Config
    Right click on the "DPM RA Services" and choose properties. Verify that under the Security tab / Launch and Activation Permissions you got Customize marked, click the "Edit..." button in the ACL you should see the computer account for
    your DPM server.
    If it's not present add it and mark all allow boxes and try to start the service again.
    You should also verify that your DPM-server computer account is a member of these two local security groups on the protected server:
    DPMRADCOMTrustedMachines
    DPMRADmTrustedMachines

  • Zenworks Adaptive Agent conflicting with ZENNTSRV.EXE?

    Good morning - We are running Zenworks 2 on Windows 2000 (don't laugh) across several thousand workstations, with the Novell Client 4.90 SP2 upgraded from 4.83 SP3. That part of it works fine.
    I have pushed out the Zenworks Adaptive Agent version 10.1.0.0 to all workstations to install upon login in order to get a handle on exactly what we have out there on machines that are not compatible with our new ZCM 10.1 installation.
    Herein lies the rub - not every time, but with increasing coincidence we are seeing ZENNTSRV.EXE crashing with a The instruction at "0x77fcae88" referenced memory at "0xfffffffd". The memory could not be "read". message at the point at which the Zenworks Adaptive Agent starts commences its installation.
    Once the Zenworks Adaptive Agent is installed, we have noticed the crash. I wonder if anyone else has experienced this, or what suggestions you guys could make to get around this at the user end.

    Thanks for the reply. I did not make it clear that I intend to keep Zenworks 2 on our Windows 2000 machines and use the inventory-only agent on that platform.
    The inventory-only agent from ZCM 10.1 is happy to coexist with Zenworks 2, but on a significant number of machines we find that this crash occurs. It does seem to be the 4.90 SP2 clients only.

  • Remote Install Failure on AIA3.0

    Hi,
    Remote Install Failure on AIA 3.0:
    AIA 3.0 installations on Windows XP-Pro is failing in Step 4 of 11 with the Error
    "Node manager is down or the username and password entered is incorrect"
    Details on the installation are as follows:
    1) Installation is done on a Windows-XP 32 bit SP2, RAM - 4 GB.
    2) SOA Suite 11gR1 PS1 and Weblogic 10.3.2 successfully installed.
    3) SOA managed server, Admin server and node manager are running successfully on remote server.
    4) The status of Node manager is reachable and has been confirmed through the admin console.
    5) When installing AIA 3.0 use Remote Install option, the 4th step is failing after providing the node manager credentials of remote server.
    Error message is "Node manager is down or the username and password entered is incorrect".
    6) We given remote server configuration on 4th step (Host Name, Admin Port, Domain name, user/pass).
    7) The Remote WLS Server is reachable.
    8) Installer is always looking local node manager is not looking for Remote node manager which one is running on remote machine.
    Error Log
    Adding C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM for deletion.
    Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/soawl.jar
    Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/template.jar
    null
    configFileName:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml
    osName:Windows XP
    Inside startPreReqOperation...prereq
    osName:Windows XP
    diskSpaceRequirements from engine:Home id =SoftwareOnlyOraclehome name=Oracle home variable=%AIA_HOME_PATH% fixedSpace=2048 unit=MB condition=null totalSpaceRequired=0 isConditionSatisfiedfalse
    entryPoint: entryPoint = oracle.installType.all condition = null className = null
    contextFile:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\prereq\oui\agent_prereq_context.xml
    The entry point is: oracle.installType.all
    Check Name:CertifiedVersions
    Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
    Expected result: One of 5.1,5.2,6.0,6.1
    Actual Result: 5.1
    Check complete. The overall result of this check is: Passed
    Check Name:ServicePackChecks
    Check Description:This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
    Expected result: 2
    Actual Result: 2
    Check complete. The overall result of this check is: Passed
    Check Name:TotalMemory
    Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
    Expected result: 1024MB
    Actual Result: 3191MB
    Check complete. The overall result of this check is: Passed
    Property File location: D:\AIA3.1\New Folder\cd\Disk1\install\win32\aiaoneclick.properties
    Item State: javax.swing.JComboBox[,170,52,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=AIA3]
    Path: D:\Oracle11GPS\Oracle\Middleware_new\AIA3
    Item State: javax.swing.JComboBox[,170,81,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=D:\Oracle11GPS\Oracle\Middleware_new\AIA3]
    Home: AIA3
    In processFieldStringAIA Home
    In processFieldStringJAVA HOME
    In processFieldStringAIA Home Path
    In processFieldStringAIA Instance Name Contains invalid characters
    getting root directory
    D:\oracle11GPS\Middleware\user_projects\domains\dev_domain
    truevalue for type of install
    D:\Oracle11GPS\Oracle\Middleware_new\jdeveloper
    D:\Oracle11GPS\Oracle\Middleware_new
    *****Web Logic Home: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3
    CLASSPATH: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3\server\lib\weblogic.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adapters.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adf-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\aqapi.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\bpelImport.log;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ccrQueries.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.comdev_6.1.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.config_6.0.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.common.security.api_1.0.0.0_5-1-0-0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.nodemanager.plugin_1.3.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\commonutils.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\connections.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\dms.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\engine.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\enginehelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb.xjc_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest-tasks.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-10.3.1.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-ant.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvesterSettings.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\install.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\jython-modules.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log4fl.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\message.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdbc5.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl-log4j.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneofftool.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soainstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soawl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\SysInfo.dll;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\template.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools11g.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\types.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlcipher.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlfullclient.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wtinstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xmlparserv2.jar;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstaller.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xmlparserv2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\share.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstallerNet.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emCfg.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraPrereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jsch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ssh.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\remoteinterfaces.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\http_client.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchactions.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchprereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchutil.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstImages.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_de.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_es.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_fr.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_it.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ja.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ko.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_pt_BR.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_CN.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_TW.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oracle_ice.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-swingaccess.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\swingaccess.jar;\;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-collation.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-mapping.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ojmisc.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\srvm.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\classes12.jar
    1
    localhost
    LocalMachine
    Connecting to Node Manager ...
    <Apr 29, 2010 4:31:11 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    Either the password and username entered are incorrect or the node manager is down
    Traceback (innermost last):
    File "<string>", line 1, in ?
    File "<iostream>", line 123, in nmConnect
    File "<iostream>", line 618, in raiseWLSTException
    WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : I/O error while reading domain directory
    Use dumpStack() to view the full stacktrace
    Anyone knows how to install AIA Remote Install on the remote SOA server?

    Hi,
    may be you enter the wrong username or password? Or there is a problem with certificate? The look file describe a wrong user name or password or nm is not reachable. Is it possible to start managed server via Admin Console? Please check nm log files.
    Regards,
    Marcel

  • Scheduler Agent Installed as Service Encrypted Password Change

    All,
    We have a Scheduler Agent installed as a service in Windows Server 2003, SP2. We want to change the password of the Master Repository. When I change the ODI_SECU_ENCODED_PASS in the odiparams.bat file it doesn't reflect this change in the service. I tried looking around in the snpsagent.conf wrapper file to see if the password is stored anywhere but dont' see it. I see it references a file called snpparams.bat, unfortunately I cannot find this file on our machine. If anyone knows how to get the new password to take effect without having to drop the agent and recreate it, thus losing all schedules that we've created, I would greatly appreciate the help.
    Thanks in Advance,
    Josh

    Hi Josh,
    the snpparamens.bat is exactly the same of odiparameter.bat. It had this name when the software was Sunopsis (SNP). Probably you saw the reference at some old document...
    If you drop the service nothing will be loose, just recreate it to get the new parameters. The scheduling list is stored, as everything in the ODI, at the repository, it means that all scheduling orders are at tables. Because of that you need to made a "update scheduler" when create a new scheduling.
    If you are still afraid, just create a new agent at another port (as service) and change the logical agent to it. Update the scheduller list an take a look if everthing is OK.
    After that you can drop the old service.
    Does it make any sense to you?

  • How to change number of retries and delay before retrying after software install failure

    I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
    I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

    First, are you referring to packages or applications because the behavior is different.
    Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
    errors.
    Jason | http://blog.configmgrftw.com

  • RHEL4U4 EM64T Grid Control agent install issue

    I've installed a 2 node Oracle 10G R2 RAC on RHEL4 U4 EM64T and it is working fine on Dell PE2850 servers. But I couldn't get the grid control agent installed on these RHEL4U4 EM64T PE2850 servers. The OMS server is running 32 bit Oracle 10g R2 on RHEL4. The issue is with the OMA (agent) install on EM64T and I've tried several different options (local install and push from the OMS server). I end up with the following error. Any feedback is appreciated. Thanks.
    Raj
    <<installActions2006-12-07_11-22-39AM.log>>
    This is error we got from both the install on the local node and tried a push from the OMS server as well.
    INFO: Start output from spawned process:
    INFO: ----------------------------------
    INFO:
    INFO: /opt/oracle/product/10.2.0/agent10g/bin/genclntsh
    INFO: /usr/bin/ld: skipping incompatible /opt/oracle/product/10.2.0/agent10g/lib/libxml10.a when searching for -lxml10
    /usr/bin/ld: cannot find -lxml10
    INFO: collect2: ld returned 1 exit status
    INFO: genclntsh: Failed to link libclntsh.so.10.1
    INFO: make: *** [client_sharedlib] Error 1
    INFO: End output from spawned process.
    INFO: ----------------------------------
    INFO: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'client_sharedlib' of makefile '/opt/oracle/product/10.2.0/agent10g/network/lib/ins_net_client.mk'. See '/opt/oracle/oraInventory/logs/installActions2006-12-07_11-22-39AM.log' for details.
    Exception Severity: 1

    Hi,
    Did you run cvu to check if all OS Patches are installed ??
    Best Regards,
    Paulo.

  • Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

    Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
    I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
    Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
    I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 18 error(s), 3 warning(s)
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    ----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
    ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
    ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
    Suggestions? thanks.

    Issue resolved with the help of Adobe Support (Mercer).  My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
    My fix was to delete the following empty folders from the Fonts Folder:
    AdobeMingStd-Light.otf
    BickhamScriptPro-Regular.otf
    KozMinPro-Regular.otf
    MyriadPro-BoldCond.otf
    TektonPro-BoldCond.otf
    And then re-run the installer (be sure to empty the trash).
    My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those.  Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

  • SCCM 2012 SP1 agent install via WSUS

    Hi guys,
    I'm having got an issue when I try installing the agent via WSUS. When I try installing manually everything seems to work.
    Here are the infos from the ccmsetup.log:
    ==========[ ccmsetup started in process 2252 ]========== ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Running on platform X86 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Updated security on object C:\WINDOWS\ccmsetup\cache\. ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Launch from folder C:\WINDOWS\SoftwareDistribution\Download\Install\ ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    CcmSetup version: 5.0.7804.1000 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Running on OS (6.1.7601). Service Pack (1.0). SuiteMask = 256. Product Type = 1 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Ccmsetup command line: "C:\WINDOWS\SoftwareDistribution\Download\Install\ccmsetup.exe"  ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSJoinedToADDomain ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Local Machine is joined to an AD domain ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSGetAssignedSiteFromAD ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    DhcpGetOriginalSubnetMask entry point is supported. ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Begin checking Alternate Network Configuration ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    spNamespace.Open(sNamespacePath), HRESULT=8004100e (e:\nts_sccm_release\sms\framework\ccmutillib\ccmiputil.cpp,1109) ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Finished checking Alternate Network Configuration ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSGetADSiteName ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Current AD site of machine is DE-Zeilarn ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Attempting to query AD for assigned site code ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=MSSMSRoamingBoundaryRange)(|(&(MSSMSRangedIPLow<=2887256160)(MSSMSRangedIPHigh>=2887256160))))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=mSSMSSite)(|(mSSMSRoamingBoundaries=172.24.8.0)(mSSMSRoamingBoundaries=DE-Zeilarn)(mSSMSSiteCode=XYZ)))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSIsSiteCompatible : Verifying Site Compatibility for <XYZ> ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetSiteVersionFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetSiteVersionFromAD : Attempting to query AD for MPs for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSSiteCode=XYZ))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetSiteVersionFromAD : Successfully retrieved version '5.00.7804.1000' for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSIsSiteCompatible : Site Version = '5.00.7804.1000' Site Capabilities = <Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="31"/></Capabilities> ccmsetup 08.02.2013
    13:45:47 196 (0x00C4)
    LSIsSiteVersionCompatible : Site Version '5.00.7804.1000' is compatible. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSIsSiteCompatible : Site <XYZ> Version '5.00.7804.1000' is compatible. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetAssignedSiteFromAD : Trying to Assign to the Site <XYZ> ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Got site code 'XYZ' from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Retrieving client operational settings from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=XYZ))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    OperationalXml '<ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
    Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    HTTP is selected for Client. The current state is 0. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    The MP name retrieved is 'mysccmserver.mydomain.tld' with version '7804' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="31"/></Capabilities>' ccmsetup 08.02.2013
    13:45:47 196 (0x00C4)
    MP 'mysccmserver.mydomain.tld' is not compatible ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Retrieved 0 MP records from AD for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Received client operational settings: <ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
    Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Http port 80; https port 443; select first cert 1; sslstate 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Certificate Issuers =  ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    FromAD: command line = SMSSITECODE=XYZ ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetManagementPointsForSiteFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    SslState value: 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Ccmsetup was run without any user parameters specified. Running without registering ccmsetup as a service. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Detected sitecode 'XYZ' from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPPORT:    80 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPSPORT:    443 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPSSTATE:    480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPSCERTNAME:     ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    FSP:     ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMCERTISSUERS:    CN=root-ca ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMFIRSTCERT:    1 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Creating CCMCertStore ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMCERTID:    SMS;FB0F35392A7FF68D2FA9C97D0CD54A3E0057964E ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    No MP or source location has been explicitly specified.  Trying to discover a valid content location... ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Looking for MPs from AD... ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Retrieving client operational settings from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Received client operational settings: <ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
    Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Http port 80; https port 443; select first cert 1; sslstate 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Certificate Issuers = CN=root-ca ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    FromAD: command line = SMSSITECODE=XYZ ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetManagementPointsForSiteFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current directory 'C:\WINDOWS\SoftwareDistribution\Download\Install' is not a valid source location. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    DetermineInstallSource(), HRESULT=80004005 (e:\nts_sccm_release\sms\setup\ccmsetup\ccmsetup.cpp,4426) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Failed to parse '"C:\WINDOWS\SoftwareDistribution\Download\Install\ccmsetup.exe" ' with error 0x80004005 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::~CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    A Fallback Status Point has not been specified.  Message with STATEID='307' will not be sent. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::~CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    ParseCommandLine(), HRESULT=80004005
    My boundaries and boundary groups are configured, I can see the objects in the Systems Management Container in AD, but still the agent install via WSUS will not work. Any suggestions?
    Cheers
    Sebastian Bammer

    see my latest post. It looks like a bug in the setup. It selects a certificate but still it presents information that iis on the mp does not accept. Check your iis logs. Manual install works for ssl only sites. I haven't got any other methods yet. I will
    keep you updated.

  • ZEN Agent install without admin rights

    Hi all,
    Sorry to re-visit something I've seen a number of posts on, but I can't
    seem to get things to work as I've been lead to believe they should. We
    have a handful of systems that do not have any instance of the ZEN agent
    installed, a mix of NT and XP (odd, I know). We are attempting to create
    an automated process that will establish whether the agent is on the
    system and if it is not, install it. Seems pretty straight forward and
    I've been referencing the following suggestions. There are a number of
    posts in the forums as well, but these were the most relevant.
    http://www.novell.com/coolsolutions/trench/3490.html
    http://support.novell.com/cgi-bin/se...?/10085696.htm
    http://www.novell.com/coolsolutions/trench/3383.html
    http://support.novell.com/cgi-bin/se...?/10073212.htm
    The problem is, despite what these instructions say, we cannot install the
    agent without having local admin rights. All the batch files are in
    place, and work, but ultimately the install fails. I've seen work arounds
    for any OS later than NT, but its important that every system have the
    agent.
    I've tried almost everything suggested in the links above but I am
    primarily pursuing the batch file approach as detailed in...
    http://support.novell.com/cgi-bin/se...?/10085696.htm
    At what point are rights elevated such that the install can complete in an
    NT environment?
    I am sure I'm forgetting some relevant details, so humor me please.
    Thanks in advance.
    Mike

    I forgot that RunAs does not come with NT. ( It's available as an add-on,
    but even that needs admin rights to install.)
    Try PSExec from http://www.sysinternals.com, but I believe that will not
    work either, but worth a shot.
    Another outside shot is to push the "AlwaysInstallElevated" MSI installer
    registry keys via a batch file.
    Unfortunately, I doubt your logged on user has the rights to do this
    either..............
    You may be stuck manually visiting and installing manually.
    Craig Wilson
    Novell Product Support Forum Sysop
    Master CNE, MCSE 2003, CCNA
    Editor - http://www.ithowto.com
    (Seeking Full-Time Expert? Drop me a note :> )
    <[email protected]> wrote in message
    news:[email protected]...
    > There's no domain to work with. The only admin account available is on
    > the local PC. I've seen options using Runas or even CPAU.exe but neither
    > are available with Windows NT.
    >
    > We are copying the relevant files to a directory on the PC before
    > beginning the install. To this point, network access has not been an
    > issue.
    >
    > The batch file dictates the install run in the background so I don't see
    > it happening, but the problem seems to come down to not having
    > administrative rights on the PC. If I launch the .MSI manually it gives
    > me an error referencing rights. If I'm logged on as an administrator the
    > install completes exactly as it should.
    >
    > Thanks for the reply. I look forward to any suggestions you may have.
    >
    >
    >> There are lots of scripts, but you need to have some ID that is a local
    >> admin. ( If the PC is on a Domain, then a Domain Admin account works
    >> great.)
    >> Additionally, network access may be lost when running this script, so
    >> copying the agent local before the install may help.
    >>
    >> Where do you hit a snag? Starting the install as the alernate user?
    >> Finding an Admin account? Determining if the agent is installed?
    >>
    >> --
    >> Craig Wilson
    >> Novell Product Support Forum Sysop
    >> Master CNE, MCSE 2003, CCNA
    >>
    >> Editor - http://www.ithowto.com
    >>
    >> (Seeking Full-Time Expert? Drop me a note :> )
    >>
    >>
    >> <[email protected]> wrote in message
    >> news:[email protected]...
    >> > Hi all,
    >> >
    >> > Sorry to re-visit something I've seen a number of posts on, but I can't
    >> > seem to get things to work as I've been lead to believe they should.
    > We
    >> > have a handful of systems that do not have any instance of the ZEN
    > agent
    >> > installed, a mix of NT and XP (odd, I know). We are attempting to
    > create
    >> > an automated process that will establish whether the agent is on the
    >> > system and if it is not, install it. Seems pretty straight forward and
    >> > I've been referencing the following suggestions. There are a number of
    >> > posts in the forums as well, but these were the most relevant.
    >> >
    >> > http://www.novell.com/coolsolutions/trench/3490.html
    >> > http://support.novell.com/cgi-bin/se...?/10085696.htm
    >> > http://www.novell.com/coolsolutions/trench/3383.html
    >> > http://support.novell.com/cgi-bin/se...?/10073212.htm
    >> >
    >> > The problem is, despite what these instructions say, we cannot install
    > the
    >> > agent without having local admin rights. All the batch files are in
    >> > place, and work, but ultimately the install fails. I've seen work
    > arounds
    >> > for any OS later than NT, but its important that every system have the
    >> > agent.
    >> >
    >> > I've tried almost everything suggested in the links above but I am
    >> > primarily pursuing the batch file approach as detailed in...
    >> > http://support.novell.com/cgi-bin/se...?/10085696.htm
    >> >
    >> > At what point are rights elevated such that the install can complete
    > in an
    >> > NT environment?
    >> >
    >> > I am sure I'm forgetting some relevant details, so humor me please.
    >> > Thanks in advance.
    >> >
    >> > Mike
    >>
    >>
    >

Maybe you are looking for