Adaptive Display can't be disabled
I have turned off adptive display via the Power CP and it is not disabled.
I have Win 8, however, this feature was introduduced in Win7.
Anyone has a solution?
Hello, insaf_mohd and onlyregisteringtopostthis. I'm just your average network guy in the process of learning more from others, so bear with me on this. I also have a WAG200G and I've recently enabled Remote Access on it. Actually, I just followed the instructions on the link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=58abe55b7a774a9181f60f2d1de937ff_4252.xml&pid=80&r...
I disabled and enabled Remote Management (Administration > Management > Remote Management) just to experiment on things. So far, it's working. Can you guys give me additional insights on other steps to do on the WAG200G to optimize its performance?
Information. Share it. Learn from it.
Help, learn and share
Similar Messages
-
My display says iPod is disabled connect to iTunes. When I connect to iTunes, a prompt displays stating that the iPod is protected by a passcode. How can I enter the passcode if the iPod is disabled?
THis page directly addressed the problem of the persistent "connect to iTunes" screen and passcode issue:
http://support.apple.com/kb/HT1808 -
my ipod touch is displaying an "ipod is disabled" message. how can I unlock it so I can reboot or restart ipod touch
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Turn off adaptive display for AC mode
Hi,
I am in curiosity of how I can turn off adaptive brightness display for external mode.
http://i.imgur.com/nnDnd9Y.jpg
I have already turned it off from Power Options in Control Panel. At first, this did not work alone to turn adaptive brightness off so I also disabled Display Power Saving Technology for battery mode from Intel Graphics Control Panel.
This works like a charm for battery mode but adaptive display is still active when on external power and I could not find an option to disable it in Intel Graphics Control Panel, there isn't Display Power Saving Technology for external power.
http://i.imgur.com/WtLe6kB.jpg
So, how can I stop adaptive brightness for AC power before I go blind of the abrupt changes in brightness when I'm plugged in to the wall?
Any help is appriciated.
Thanks!
This question was solved.
View Solution.Hi @yldzanl ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15 Notebook and wanted to turn down the brightness on AC mode. On your first screen shot it shows you under the Edit settings. You will notice adjust brightness one for battery mode and the other for AC adapter, they are not the same.
Change this to be the same for battery and save settings.
Thanks should take care of it.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Hi,
How can we Hide / Disable the Help(?) and Close(x) buttons which are located in the right corner of the Top Link Bar in the Sharepoint Document Library pages as well as Excel Web Access?
Our requirement is : When we try to view the Excel Services Report from another web site, Help(?) and Close(x) icons are also appearing in the Excel Web Access Web Part, but we don't want to display them in our site.
Please let us know the solution for this case.
Thanks in advance.
Regards,
SanjanaHi,
In the xlviewer.aspx, we can find the two buttons like this:
To hide them, you need to add the CSS into the xlviewer.aspx which stays in:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
My iPhone is displaying a "iPhone is disabled" notification. It asked me to enter my password multiple times before locking me out. Can you help with this?
Hey there!
Unfortunetly, in situations like this, the ONLY other way to bypass that four-digit passcode and/or a disabled device is to connect to a computer with the most recent version of iTunes (11.1.3), connect the device in Recovery Mode and restore it to factory settings. Restoring to factory will completely wipe the device, including the four-digit passcode.
The steps to do so are outlined in http://support.apple.com/kb/ht1212
(If there is any other way to bypass the passcode, it would have to be third-party, which I am not familiar with any program that can, sorry!). -
Bought an apple tv but my tv does not have a hdmi connection, is there an adapter I can purchase
I purchased an apple tv and hdmi adapter, but then realized my tv does not have an hdmi connection, is there an adapter I can purchase?
Yes. Get an adapter from the mini display port to HDMI and connect the HDMI cable to the TV. For audio you will need a separate connectors from you audio output port to the RCA connectors on the back of your TV. Use an extension and a 'Y' connector. If you MBP is a 2011 model then it will also transfer audio and a separate cable is not needed.
Ciao. -
i restored my ipod touch .bt again it display as"ipod is disabled.connect to itunes'wht shall i do nw.i wanna get it back.i restored nt in my computer.help me to solve this problem !!!
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPod.
Take special note of the article about using recovery mode. Many times, that is the only way to bypass the pass code and restore the device.
IOS: Wrong passcode results in red disabled screen
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US
This will tell you how to restore
http://support.apple.com/kb/HT1414
If you cannot restore that way, you may have to use recovery mode.
http://support.apple.com/kb/HT1808 -
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except movies. I can hear tv episodes, music, YouTube videos, etc. anyone have an idea of how to fix this issue? Thank you for your help in advance.
Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs. This is important as otherwise while I am in the app tab, i mistakenly start browsing from that tab and meaning of the app tab is completely lost...
How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password -
How can I permanently disable the "fn" key?
Hi. My subject says it all. How can I permanently disable the "fn" key?
At first I thought I had a virus or something because when I typed only weird symbols came out. Then I reset the computer. Then I couldn't even log in. I tried Time Machine etc.
Then I realized that the "fn" key wasn't working right. It seems to be working backwards. It acts like it's being pushed when it's not, and when I do push it it acts like it's not being used.
So it's kind of a simple problem but it's really annoying.
Is there a way I can just disable it permanently? Even physical force if necessary. I tried to break it but it wouldn't break. I don't really use the key anyway so it doesn't really matter. I don't want to pay a bunch of money to replace a key I don't even use.
Thanks. I hope someone knows.That's the best answer. Yeah usually if you press "fn" or "option" you can get it to work for awhile.
Yeah I have considered some kind of external keyboard also. It will make a laptop less laptopish. But it could do the job for awhile.
It's sad because I don't even care about the "fn" or "option" keys.
But anyway it's not catastrophic at least.
And yeah maybe we can get a new computer later or something. I like mine though. It's customized and is how I like it right now.
Anyway thanks for the reply. -
My ipod touch displays message" ipod touch disabled,connect to itunes. Ipod touch does no connect with i tunes. I hold on/off switch on ipod touch until Apple log appears on the screen, but the problem persists. Any suggestions ? I am running Itunes 10.6(7) My Mac OS X Version is 10.5.8.
I connected ipod touch to my IMAC while holding on/off switch as stated to by anothe community memberand problem is solved. I wasable to update and reatore. I have been trying to solve the disable problem
for weeks. althou you did not actually solve the problem, In time you probably would. You were on the right track Thank you.
This helped me
rbrookstone -
Yesterday I ordered an iPad 2 WiFi version (no 3G) and I want to know if it's possible to connect it to my DSL modem that is not wifi/wireless. Is there some sort of wifi adapter I can buy to connect to the modem or do I need to buy a wireless router?
TIAIf you have a desktop that can do "Internet sharing" and wi-fi, you may be able to use that instead of buying a router. I haven't done tihs recently but played with it with my iMac before I bought a wireless router.
But a router is the better option. They're not expensive and recent ones have some decent security. I have a Netgear WGR614 (v10) with a firewall built in making me double firewalled on the desktop (where all the really critical stuff lives like banking info and all) and it has an "access control" option where you not only password your network but specify exactly which devices can connect at all. Something I like because the signal reaches the street outside the house. That's a bit more "reach" than I like. Though, funny thing, my brother (who's iPad is authorized to use my net) did a quick update by pulling into my driveway once while I wasn't even here.
Any wireless can have a surprising reach. I live in a fairly rural area and I pick up on other peoples' wireless all the time. Which, out here, I did not expect. -
Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?
Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim
Maybe you are looking for
-
HT5148 how do i take my edited video from final cut pro and save it to my hard drive
how do i take it from the program and save it as a .mp4
-
Schedule an App to run, or a delayed notification.
How can I notify the user of something on a long time scale. The user may not have run the app for weeks or months, but I want a notification to pop up. It doesn't need to be a full instance of the app, a small helper app or even a growl notification
-
Copying production to development
I'm posting this here because, quite frankly, I'm not sure where it should be posted, so forgive my ignorance... Has anyone create a full development installation by using a copy of their production installation? I mean the full suite: BPEL server, B
-
Timesheet keeps loading when saved or sent for approval
Of late we are having issue with users while trying to save timesheet and send timesheet for approval. On selecting these buttons the timesheet keeps on showing 'loading' message and when user clicks on any other link in PWA page a pop-up comes up 'Y
-
1611 Error on iTunes 10.5 Trying to update to iOS 5 Please HELP!!!
1st off i had an ipod touch 4th gen which was determinted by apple to be hardware defectived. They gave me a new iPod touch 4G no questioned asked. The issue i'm having is my new device is having the same issue my old one was having with the 1611 err