Adaptive Wide Angle (PS CS6) - Auto doesn't work

When I try to use "Auto" correction in the new Adaptive Wide Angle filter, it pops up with "No matching lens profile found". I searched for information and was directed to go to the Lens Correction filter. I pressed the "Search Online" button. The first time it comes back with "Connection timeout", but the second time it says "No online profiles found". Come on, really?!
ACR has my lens profile (Canon 24-105 f/4 IS), why can't PS CS6 find it? Is there a workaround? I'd really like to use the Adaptive Wide Angle filter.

I've discovered a bit more information.
My current camera is a Canon 5D Mark III, but I had a Mark II with this same lens before that.
I was editing a photo from the Mk II, and found that Adaptive Wide Angle defaulted to "auto" for it, having found a lens profile.
Since it's the very same lens, it apparently is not related to the lens at all, but rather the camera body.
I just installed an update to PS this morning, but it did not improve the situation at all.
How can it be that Adobe doesn't seem to support the 5D Mark III in PS CS6, one of the more popular full-sensor camera bodies out there?

Similar Messages

Editin in cs6 from lightroom 5.5 does not allow adaptive wide angle filter

when opening a file for edit in cs6 from lightroom 5.5 the adaptive wide angle filter does not work. Opening the file directly into cs6 from bridge or from windows works normally

Did you merge the layers before going into Adaptive Wide Angle?
Shift+Ctrl+Alt+E (windows)
Shift+Cmd+Option+E (mac)

PS CS6 Adaptive Wide Angle Filter - not working.

I am working on a panorama in PS CS6. I have merged all the images and am trying to correct the perspective using the adaptive wide angle filter. But when I open the filter and set correction mode to perspective - all I see is a background transparency. If I try to use one of the other modes the full image isn't visible, just seeming randomly cropped. I am using a macbook Pro running Lion 10.7.5.
Also, the lens information IS embedded in the image and is visible when I open the filter.
Any advice would be helpful!

Did you merge the layers before going into Adaptive Wide Angle?
Shift+Ctrl+Alt+E (windows)
Shift+Cmd+Option+E (mac)

Adaptive wide angle filter error for iPhone 4s in PS CC

Hello,
I have just watched a tutorial on Adobe TV regarding the new adaptive wide angle filter used on pre-stitched panoramas. I open an iPhone pano image. go to filter–>adaptive wide angle filter and in the lower left corner I find – as indicated as being requested to function properly the tut – the name of the camera, the lens and the f-stop with wich the image was taken. The filter does still not draw the automatic line on the corved part of the building I try to improve. Going to correction –> automatic in the upper right corner I get an error message that no matching profile for the iPhone's camera's lens could be found.
Why that when it is clerly indicated as being 4.28 mm etc already? The iPhone 4S has been here for quite a while and is widely used, so why the error?
Thanks for any hint!

Thanks, Trevor.Dennis,
it did seem to work out for a moment the wayyou suggested: the drag line appered allright this time, but after adjusting the curved line the filter made a fisheye image out of my panorama, cutting off about 20% on each side and leaving a ragged edge remining of a circle.
I'll keep trying!

InDesign CS6 Font doesn't work in table cells

Hi all!
I'm working in InDesign CS6 on Mac OS 10.6 Leopard. I have character and paragraph styles defined using a certain font, and they work just fine except when using them in table cells. I have the character style nested in the paragraph style, which is then used in the cell style. But it doesn't work. It inherits everything correctly except for the font. If I select the text, the font menu tells me it is the correct font, but it displays in a different font. I've tried exporting to IDML and resaving, but that didn't work. I'm stumped

Hi Jeffrey-
Indeed it should, and I see why using a formatted table would cause conflicts, but I am importing it as an unformatted table already. Built all styles in InDesign first, then imported as unformatted table. A few times it did work as expected, but most of the time it steadfastly refused to apply the correct font.
But in any case, that wasn't my only issue with the tables. My understanding of importing Excel spreadsheets is that applied table and cell styles will be maintained when the linked file is updated, but local formatting/overrides will be wiped out, which is why I was trying to get the styles working in the first place. However, after testing, I found that even when I didn't use local formatting/overrides, updating the linked file still broke my InDesign layout.
In my test, the only thing I did to the imported (unformatted) table was to apply the table/cell styles and adjust column width (which is unavoidable as far as I know - didn't see anywhere I could set column width as part of a style). But even then an update to the linked file removed all the styles and column widths I had set (and was also highly annoying as it gave me a separate error message about the formatting loss for each and every instance of the spreadsheet).
Could be a fluke, or could be I'm missing something, but for whatever reason, I just couldn't get it to work

Photoshop CS6 Activation doesn't work

I downloaded Photoshop CS6 from Adobe and when i tried to activate it it doesn't work.
I used my "Adobe Creative Suite Design & Web Premium" CS6 but it said the Serial Number was closed.

Hi There,
Kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
Thanks,
Atul Saini

CS6 serial doesn't work to install Acrobat X Pro.

I've created a deployment of Acrobat X Pro with the Adobe Customization Wizard X. This is because AAMEE doesn't support Acrobat. Adobe support tells me I need to use my CS6 serial but no matter what I try my CS6 key won't work. A dedicated, standalone key for Acrobat X Pro works, but not my CS6 key. Has anyone else experienced this? Adobe phone support was no help. Thanks!

Hi
A CS6 serial number will NOT work with the Acrobat Customization Wizard. You were misinformed by Adobe support (If you can PM me a case number, I can ensure that this training need gets addressed with the agent/team in question). Only Acrobat serial numbers will be accepted by the Customization Wizard.
The usual way to use a CS6 serial number in conjunction with an Acrobat deployment is to package your CS6 suite using AAMEE 3.0, deploy Acrobat (as so-called Execeptions payload) using the commands documented in the AAMEE deployment guide, followed by a deployment of the Suite package.
This process is documented in the Enterprise Deployment Guide (linked here from the forums, and available at http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html).
Kind regards
Henk

CS6 license doesn't work

After more than a year of working properly, my CS6 Master collection mac UK installation now asks for a serial code. The activation code I have (the original one) doesn't work. Pretty sure I didn't but a temporary license. I guess someone needs to check the code, but doesn't seem wise to provide it here..

thanks, but no. all I get is "The serial number you entered is invalid. Please try again. If the problem persists, contact Customer Support."
doesn't matter if I open Illustrator, Photoshop, Acrobat Pro, etc..

Repairing Panoramic Images with the Adaptive Wide Angle Command | Understanding Adobe Photoshop CS6 | Adobe TV

This video lays out many of the newer methods you can use to fix perspective issues in composite panoramas, straighten out areas of distortion and fill in blank spaces.
http://adobe.ly/10e9aLk

Hi. Thanks for the video. I did get stuck with the sky filling in part. After I select, modify and expand, I shift deleted but did not get the menu to fill the sky in and got a could not complete your request message because its not editable. What have I missed?

Bad adapter engine configuration - File Sender scenery doesn't work

In file sender scenery, the adapter doesnu2019t pass any message to the Integration Engine.
When I take a look to the communication channel monitoring it shows the channel with status OK (Green). But when I look into the audit log of the incoming message I see the following error:
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party , service VLTEST, interface namespace urn:damm.es:vialactea:logistica, interface oa_SimpleLine No sender agreement found for , , , , ,
The sender agreement exists in the Directory and the status of the cache is OK.
But in the Message Data I see this End Point URL: http://asrmd:8082/sap/xi/engine/?type=entry
This is adapter is attached to a development system instance number 80 and the port of the above URL is a reference to the TEST system instance number 82. I investigate this issue but I canu2019t find where the miss-configuration is causing this bad End Point.
Have anybody an idea about this problem. Itu2019s the first time I found this kind of miss-configuration.
All other adapters are working fine. The file receiver adapter is working fine too.
Thanks in advanced.

Hi Sergi,
Now is clear. Sorry but I didn´t see your posts properly. I didn't move the cross bar until the final.
So now I change my point of view.
Go to Runtime Workbech --> Component Monitoring --> Integration Engine --> Test Message. Which URL is displayed here? is it right?
If don't, effectively you have wrong configured your URL of the Integration Engine.
Go to SLD --> Business Systems --> Select your XI business System. At the Integration Configuration tag check the URL, if it is wrong, change it and save the changes. Remember that the rol must be Integration Server.
Refresh the caches.
Hope it is usefull.
Carlos

Photoshop cs6 CC doesn't work properly

Hi Adobe ,
I just join the creative cloud and after installing adobe Photoshop CS6 CC i discovered a few problem during designing. After a while my shortkey such as cmd+J and cmd+G don't work anymore, I have to restart Photoshop all over again and then it works properly and within a few minutes the shortkey are out again. What is the problem? Can you help out.
I'm using a Apple iMac 21,5 inch with OS X 10.8.2.
Hope you can help me because this is quite anoying!
Groetjes,
Robbie

Not a CC user myself yet (what a regrettable developement Adobe’s switch to CC is).
But I suppose the old stand-byes probably still apply:
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

GenerationType.AUTO doesn't work correctly with Kodo and MySQL

Greetings,
I'm migrating applications from JBoss/Hibernate to WebLogic/Kodo. The following column annotation:
@Id
@Column(name="CUSTOMER_ID")
@GeneratedValue(strategy = GenerationType.AUTO)
public long getCustomerId()
is supposed to generate auto-increment primary key in mysql. This is what happens with Hibernate. With Kodo, this seems to be equivalent with GenerationType.TABLE as a table named openjpa_sequence_table is created, containing sequence values. So what should one do in order to be able to use true auto-increment strategy with MySQL and Kodo ?
Many thanks in advance,
Nicolas

Hi Nicolas,
By setting the generation strategy to AUTO, you're essentially letting the JPA provider choose which strategy to use. It looks like Kodo is using the TABLE strategy by default and Hibernate is using the IDENTITY strategy here. You can set the strategy to IDENTITY if you want Kodo to behave similarly to Hibernate. However, it's worth pointing out that there may be a reason for Kodo not using the IDENTITY strategy by default.
The docs at: http://edocs.bea.com/wls/docs103/kodo/full/html/ref_guide_pc_oid.html#ref_guide_pc_oid_pkgen_autoinc
point out the following:
"Statements inserting into tables with auto-increment / identity columns cannot be batched. After each insert, Kodo must go back to the database to retrieve the last inserted auto-increment value to set back in the persistent object. This can have a negative impact on performance. "
- Matt

Margin:auto doesn't work :/

Hi!
I have problems with centering a page on IE. Courios thing is that it displays ok when i click preview in browser and centering fails when i run the project.
I have GroupPanel with style
margin: 0 auto auto auto; padding: 5px 20px 20px 20px; background-color: rgb(255, 255, 255); width: 760pxand Layout panel inside it with style
padding: 10px; obviously i work in flow layout to obtain centering on different resolutions.
damn IE!
anyone has an idea what's wrong?
or myabe you got some trick to center in IE ?
THANK YOU !

Hi,
Here is my experience.
1) My preloader:
2) So, i wrote:
#loader-bar { margin: auto; }
#loading { margin: auto; }
Now, my preloader and your stage:
#loader-bar, #loading, #Stage {
     height: 400px;
     width: 940px;
     margin: auto;
Of course, you add style tag.

Adobe CS6 Design doesn't work anymore

I bought Adobe CS6 design and Web premium for Windows 14 months ago. Today I started Photoshop and it says: the trial periode has been expired, buy new software. What should I do now?

Hi,
Delete these folders and reinstall from the dvd :
Windows:
/Program Files/Common Files/Adobe/Adobe PCD
/Program Files/Common Files/Adobe/caps
/Program Files/Common Files/Adobe/backup
Mac OS:
[startup drive]/Library/Application Support/Adobe/Adobe PCD
[startup drive]/Library/Application Support/Adobe/caps
[startup drive]/Library/Application Support/Adobe/backup

CS6 Update doesn't work

On my Windows 7 CS6 Creative Design Suite, I cannot access the "update". An error message says that there is a problem with the internet connection, but there is nothing wrong with the connection and updating worked fine a week ago or so.

As you probably know, there are a slew of updates, and they come in from time to time. Without the internet connection, I won't even know when something is available. So, no, this is not really a solution.
I doubt there is a security block on Adobe's Cloud since I was able to install and register it fine on the same PC.

Adaptive Wide Angle (PS CS6) - Auto doesn't work

Similar Messages

Maybe you are looking for