ADB and FASTBOOT on Android devices are failed in Windows 8.1 RTM
hii
I am using windows 8.1 upgrades laptop, on which i found that adb and fastboot drivers are not working. It is giving error (device
failed enumeration)
I have tried every possible way on internet to update the driver but no success.
Please provide us the solution to work with it properly
Hi,
Based on my research, I suggest you try the following steps to see if it works.
1.Press "Start Key/Windows Key + C" or move your cursor to top right corner of the screen to activate the Charm Bar and click on "Settings Button" as shown in following figure.
2.The setting panel will open. Click "Change PC Settings" from the bottom as shown.
3.You will have this PC Settings screen. Click on General Tab. and scroll down to the bottom to find "Advance Start up Option" as shown below and click on Restart. This is immediate restart so make sure all programs are closed and saved.
4.Your PC will reboot into Advance Start Up option. And you will see following screen. Now simply press on "Troubleshoot" option.
5..In troubleshoot click on "Advance Options”. In advance option select "Start-Up Settings" .
6.Now just press restart button in Start-Up settings as shown below. Your system will reboot in Start-Up Option Mode.
7.After your system is rebooted you will get this following screen. Here to choose options we have to use function keys. Now press "F7" to select "Disable Driver Signature Enforcement" .
Now your PC will boot with Disabled Driver Signature Enforcement and you will be able to install Flashtool/Fastboot drivers.
You can get this drivers from Post #2.
If the issue persists, I think the ADB fast boot related driver had a compatibility problem with Windows 8.1.
Also, I will forward this case to our product team.
Regards,
Kelvin_Hsu
TechNet Community Support
Similar Messages
-
HTC/Alcatel and probably other android devices fastboot problem
I have several PCs at hand, and they all fail the same way specifically after updating to Windows 8.1, although I think I've heard complaints of some W8 users as well, but I tested one recently and it was fine, so I'll stick with the update only.
I put the device(s) in fastboot mode, wait for a little long time, longer than usual. Then it displays:
Unknown USB Device (Device Failed Enumeration)
Now, as far as I understand, there was a similar problem with Sony devices: http://forum.xdadevelopers.com/showthread.php?t=2598155 which was fixed with update KB2917929.
Here's what I did: Messed a lot with the Windows drivers, and while getting no result, I found a website that guided me into forcing some Windows 7 drivers on my USB 3.0 hub. Now, all fastboot devices work fine on the two 3.0 ports, but 3.0 devices fail
to work properly. For example, my external drive connects and then disconnects and stays dc/ed.
There's been a hell lot of people having this problem. A simple google search will reveal a lot of cases.
I repeat: All 8.1 systems have the same problem. Tested on at least 3. It's not a simple driver issue since there's different brands and vendors. The only problem I have is with Microsoft drivers. Please fix this as we are many who need to use proper fastboot.Compatibility regarding what? :) Why do they work on W8? Why not on 8.1? Why do they only work on 8.1 with older USB drivers? Drivers that have severe compatibility issues.
Let me get this straight. Without installing any fastboot drivers, when devices are connected in fastboot, they STILL give a Unknown
USB Device (Device Failed Enumeration) error! -
Find my iPhone has reset and none of my devices are listed; is this because I have an old Iphone4? And can I set all my devices back up again? And how do I set my devices back up?
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.
Try these instructions:
http://support.apple.com/kb/TS3281
You may also have to go to the link in the bottom paragraph if the first page instructions do not work. -
I have called Apple support twice and no one can confrm or deny as to whether Android devices can connect with the Airport Express. I have had the it configured 3 times so far and my Galaxy S4 and Galaxy Tab 3 7.0 are useless with the Airport Express.
BTW what did you mean by using my old wireless router as a AP?
Every Wireless router ever made is actually made of two components..
A router and a wireless AP. (AP = Access Point).
To use any wireless router as a AP you simply bypass or turn off the router..
In an Apple router this is called Bridge mode..
In many routers it is known as AP or WAP mode.
But often they do not have the option..
Set it up manually.. we call this WAN bypass as it will bypass the router.
So what you do is open your wireless router setup page in your browser.. go to the LAN setup page.
You need to do two things.
1. Turn off the dhcp server.
2. Set the LAN IP to match the main router..
For instance if your plug it into your apple router and it is at the default IP.. 10.0.1.1 then set the Linksys to 10.0.1.254
The Linksys is then updated.. Plug the ethernet cable from LAN port apple router to LAN port WRT120 (not WAN)
Now with a computer plugged into the apple router or into the Linksys .. by ethernet.. open the IP address you just set.. go to the wireless tab in the setup and give the wireless SSID a suitable name for your other (non-apple) products.. voila.. you have now turned a wireless router into an AP. -
I use my Ee PC notebook as the "main device" and have successfully synced with my other laptop. When I try to sync with Android Phone however, I don't get a 3 x 4 digit code that I should enter in the dialogue pop-up on the main device.
My Android also shows 3x4 dots where i´m supposed to enter the code. So, no code, and two empty 3x4 dot dialogue pop-ups.
Worse, the dialoge pop-up on my Android device gets "stuck", It does not respond to the cancel button and won't go away when I use the arrow back-button on the device.Thank you for your reply. I tried to sync using the Sync key (by tapping "I don't have the device with me"), but again: the dialog pop-up on my android got stuck and I had to restart it.
Now I have trouble to log the bug to file it. I suppose I have to log the Android activity, since that is the device I'm having trouble with (syncing two laptops worked fine). But I have no idea were to find "about:sync-log" on my droid phone :-S
Hope you can help? Really appreciate it! -
How to import photos and videos from Android device?
Hello
I just bought Photoshop Elements 11 recently and I'm trying to import photos and videos from my phone, Samsung Galaxy SIII, but having a little trouble.
When I go to "Import from Camera or Card Reader" option and choose my phone from the "Get photos from" drop down menu in "Source" section the "Photo downloader" finds
every single photo and/or video stored on the device and it's memory card but I'm trying to import only photos and/or videos I've shot my self with the phone, witch is kept
in an folder named DCIM, but I simply can't figure out how to so my question is:
How do I import photos and/or videos from my Android device?Try clicking Advanced button (bottom left) in the downloader dialog. You should then be able to select and deselect thumbnails and import only the ones you give the checkmark.
-
Windows Devices are Failing Log In
I have several Windows devices failing log in on my network (according to the spice UI).
However when I check the event log on the individual machines I am seeing successful logons immediately followed by logoffs (in the same second). The account I have set up on the machines is an Admin Level user account with the same User Name and PW across the network.
Spice UI is also confirming that I have ports 445 (micro_ds), 3389 (rdp), 135 (wmi), 139 (netbios_ssn) open on the machines.
Majority of the machines are running windows 7 Pro or Ultimate, a couple are on windows 8. I do have 4 windows 7 machines that are authenticating as expected.
Any help would be appreciated.
This topic first appeared in the Spiceworks CommunityI have several Windows devices failing log in on my network (according to the spice UI).
However when I check the event log on the individual machines I am seeing successful logons immediately followed by logoffs (in the same second). The account I have set up on the machines is an Admin Level user account with the same User Name and PW across the network.
Spice UI is also confirming that I have ports 445 (micro_ds), 3389 (rdp), 135 (wmi), 139 (netbios_ssn) open on the machines.
Majority of the machines are running windows 7 Pro or Ultimate, a couple are on windows 8. I do have 4 windows 7 machines that are authenticating as expected.
Any help would be appreciated.
This topic first appeared in the Spiceworks Community -
Help me!! I changed my email address associated with apple Id. Now ALLLLL my devices (iphone, mac, ipad) are associated with old apple Id. But It won't log out or delete the old one without having a password. Neither the old passowrd or the new password works. Now nothign works. Please help me!!
Hello Alexandra,
Thank you for the details of the issue you are experiencing with iCloud on your devices after updating your Apple ID. I recommend the following steps:
Symptoms
iOS 7 may ask for the password to your previous Apple ID when you sign out of iCloud.
Resolution
1. Use your current Apple ID password
Trying using your current Apple ID password. If that doesn't work, continue to the next step.
2. Sign out and back in to iMessage or FaceTime
If you are currently signed in to iMessage or FaceTime
If you are not signed in to iMessage or FaceTime
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud and try to sign out.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Tap Settings > iCloud and sign in with the new Apple ID.
Find the full article here:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I'm unable to transfer my contacts to my IPhone 3G (latest ios 4.2.1 installed) during an iTunes sync. All other content appears to sync OK and my ios5 devices (iPhone 4s and iPad 2) are syncing fine. I suspect this could be an iCloud issue as my iPhone 3G is not compatible with iCloud. Can anyone help me out with this issue?
I solved this issue by turning off iCloud contacts sync - then my iPhone 3G would sync through iTunes as normal. I then just turned iCloud contacts sync back on. Job done!
-
Solved: adb won't list android device
I was banging head against this for a few days. I tried all the udev rules out there. Then realized they didn't apply if running as root. so I google my device id and saw a post about usb_modeswitch (http://www.draisberghof.de/usb_modeswitch/) I installed the package and problem is solved.
Hope this helps.
Regards,
BrianI use the AUR package android-udev.
The google part is :
# Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666", GROUP="adbusers"
# NEXUS S
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e21",
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", SYMLINK+="android_adb"
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", SYMLINK+="android_fastboot"
# Nexus One
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e11",
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e12", SYMLINK+="android_adb"
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="0fff", SYMLINK+="android_fastboot"
# Generic and unspecified debug interface
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d00d", SYMLINK+="android_fastboot"
And I'm part of the adbusers Group. -
My husband is getting all of my childrens messages on his phone. How can I change that or does he need his own apple ID? If so do we need to rest his phone to register it under him?
Yes he would need his own apple id for imessage/facetime and icloud.
In the meantime on his device go to settings - message - send&receive - remove the shared apple id. -
Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
<sup>a</sup>
Main Circuit Board
<sup>b</sup>
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
<sup>c,d</sup>
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
<small>(mouse over user name for details)</small>
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection <small>[Back to Top]</small>
Group
Policies
Norton AntiVirus Version 18.1.0.37
Virus Definitions Version Not Up To Date
Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days<small>(mouse
over last used for details)</small>
Hosted Virtual Machines<small> (mouse over
name for details)</small>
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse -
Dc/dvd drive not functioning and not recognized in device manager after installing Windows 7 OS
I have an HP Pavilion laptop, model # dv9617nr, which was originally loaded (from the factory) with Windows Vista. I upgraded the OS to Windows 7 a few months ago, and initially, everything worked fine. Within the last month, however, my DVD/CD ROM optical drive stopped working and is not recognized in Explorer, and does not show up in Device Manager. I have tried a number of fixes from this forum and the Microsoft Windows 7 forums, with no positive effect. I should note that upon inserting a disc in the drive, everything sounds normal (device spins and the external LED lights up) but nothing happens and the unit shuts down.
I have no idea if this is a software or a hardware issue. I did check the HP website for software and driver updates for my model and the Windows7 OS, but HP has no update for this PC running this OS. ANY help is greatly appreciated.Hi
Please find the link given below might help you to fix the issue on your unit.
Troubleshooting CD or DVD Drive Detection Problems
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Please give me detailed instructions if possible
Photoshop Elements 13 only runs on Windows 7 and 8. It will not install or run on Vista.
System requirements | Adobe Photoshop Elements
Maybe you are looking for
-
Read .txt file of numbers and draw
Hello. I am trying to utlize BufferedReader and g.drawline to read numbers from a text file and output to the screen as a "line". I know I still need a while loop and some error checking, but, am having trouble finishing the more 'basic' portion of t
-
ITunes error 7 windows error 14001
i recently installed itunes on my computer, a successful installation actually... no errors. after that itunes didn't run and popped up error 7, as well as itunes helper and every time i boot my windows it pops up... the thing is, not only itunes was
-
I installed the update but the "radio" option is not showing up in Music. Anyone else had this issue?
-
Has anyone else encountered this problem? After logging into the App store correctly with user ID and password, I then go to the 'download' or 'buy' button for an app I want and the system asks me to re-enter my password for "billing" info. The syste
-
CS5 extended and 3d .obj files containing clip maps
Hi, I've modeled some 3d vines using a standalone program that outputs .obj files. I would like to export some .pngs with transparent backgrounds for use in my 3d program (sketchup) - the 3d vines are a great deal of geometry I don't need except in o