ADB driver for Yoga 10 Tablet

Hello,
I'm a developer and I bought an Yoga 10 Tablet for software developing purposes. Where can I find a compatible ADB driver?
All the best,
Lucian
Solved!
Go to Solution.

You may need to boot Windows with Driver Signing Enforcement disabled to get the drivers installed.
Try this:
https://drive.google.com/file/d/0B-qacKmGLKJ6OTJMRW9pWUJkQTQ/edit?usp=sharing
If that doesn't work, try the drivers from this thread, it's the same chipset:
http://www.pandawillforum.com/showthread.php?22654-ROM-Clean-ROM-for-Freelander-PX2-MTK8389-Quad-Cor...
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Similar Messages

  • Need HID Sensor Collection V2 Driver for Yoga 2 Tablet 10

    The Yoga 2 Tablet 10 works very well with the 9879 version of Windows 10. The only thing that I'm seeing as missing is that the screen will not auto-rotate. Device Manager shows that the HID Sensor Collection V2 Driver in not functioning.
    Does Lenovo have a driver download location for this device? I expect that the Windows 8.1 version would work.

    Good day.
    You have the 1051 model tablet, correct?
    When (if) drivers become available, I would expect them to be listed here:
    http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1051
    As of now, though, I don't see anything available, so you'll need to keep checking.
    Hope this helps a bit.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Mtp driver for yoga 8 tablet

    i am unable to transfer my music files to my yoga tablet, when i troubleshoot i get message mtp driver is missing and when i try to download driver it fails to install also when i do a different check i get the message windows can`t find driver and to contact customer serrvice support. but they were unable to help.
    Regards
    Chris

    Hi,
    If you can't use MTP you can try "mass storage". When connected, go to "Settings > DEVICE > Storage", then tap "..." and select  "USB storage".
    But MTP should work. Which version of windows do you use ?

  • I need an audio driver for Yoga 13 with Windows 7 Pro 64 bits English

    Hi all,
    I downgraded my Yoga 13 from Windows 8 to Windows 7 pro 64 bits, and ever since then I have a problem with my microphone.
    Skype finds the microphone and can use it, calls are all working fine, but any other program using audio does not work with the microphone.
    After troubleshooting, I concluded that I need to update the driver but I cannot find it. Anything that I find on the Lenovo support pages does not install (event the one found on this page: http://support.lenovo.com/fr/fr/downloads/ds002860​).
    After looking at this post: http://forums.lenovo.com/t5/Idea-Windows-based-Tab​lets-and/I-need-an-Internet-driver-for-Yoga-13-wit​.... I figured I would to be provided with the link by someone from Lenovo support.
    Here's the hardware ID of the soundcard: HDAUDIO\FUNC_01&VEN_14F1&DEV_506E&SUBSY​S_17AAA001&REV_1000. In Windows it is recognized as High Definition Audio (in the device manager).
    Thanks a lot for your help.

    Hello,
    From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset. 
    I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers.  Perhaps Device Manager will find the correct drivers to install that way.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • I need an Internet driver for Yoga 13 with Windows 7 operating system

    I downgrade my yoga 13 operating system from Windows 8 to Windows 7 because it has a confliction with my software that I need to use. After that, I cannot connect it to Internet. Does anyone know the driver that I can use for this circumstance please? I also have some unknow devices listed on the Device Manager such as SM Bus Controller, PCI Data Acquisition and Signal Proceussing Controller, USB Controller, etc.

    Hello,
    From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset. 
    I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers.  Perhaps Device Manager will find the correct drivers to install that way.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Cisco VPN Client Driver for Atom Processor Tablet

    I recently bought a Dell Venue 8 Pro and installed Cisco VPN Client (5.0.05.0290). I get the Error message "Reason 440: Driver Failure"
    This is perhaps this is because the client driver is not compatible with the Atom processor of the Venue 8 Pro. I have serched Dell for a driver but found none.
    Any ideas?
    Thanks,
    H

    Hi,
    According to your description, I think it is compatibility problem.
    I suggest you use the vpn in the windows 7 compatibility mode.
    Making older programs compatible with this version of Windows:
    http://windows.microsoft.com/en-GB/windows-8/older-programs-compatible-version-windows
    If it doesn't work, I suggest you use the method as the following thread mentioned:
    http://social.technet.microsoft.com/Forums/windows/en-US/ad556ff3-8d33-453e-8b16-71e36e23e2c6/cisco-vpn-client-and-windows-81-preview-determinist-network-enhancer-dilema?forum=w8itpronetworking
    Hope this helps.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Second hard drive for Yoga 13

    I have asked several times and never received a reply but does anyone know if this SSD fits in the second slot of a Yoga 13?
    http://www.amazon.com/Crucial-240GB-mSATA-Internal-CT240M500SSD3/dp/B00BQ8RKT4/ref=cm_cr_pr_product_...
    Solved!
    Go to Solution.

    the dimension looks to be correct, so it should fit.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Newest Bios and platform driver for yoga 2 1051

    So what does this newest bios and platform driver supposed to fix? the readme doesn't say what exactly.  I hate to upgrade and end up with more problems.  It's good to finally have more drivers on there to do clean install but seems like still not all the drivers are there.

    wow no comment over 3 days.... guess no one upgraded ?

  • Intel HD Graphics driver on Yoga 2 Pro fails after Windows 10 upgrade

    Yoga 2 Pro. Everything working fine under Windows 8.1. Upgraded to Windows 10 RTM version. Intel HD Graphics device failed, message in Device Manager is "Windows has stopped this device because it has reported problems. (Code 43)". Installed the latest Windows 10 driver for Yoga 2 Pro from the Lenovo support site (driver dated 7/15/2015). This did not fix the problem. Interestingly, the first time I installed the driver from the support site (I tried it twice), I received a message stating "I already have a newer version of the driver installed". I chose to overwrite/install anyhow, as this was the supported driver from Lenovo. In addition, the Intel Graphics Control Panel (that installed with the driver) fails to come up as well. Is this a known problem? Is there anything else to try? How do I determine exactly which version of Intel HD Graphics I have (there seems to be many versions listed on Intel web site).

    cdsmith22 wrote:
    Update:  I've not had stability when using the Windows 8.1 driver on my Yoga 2 Pro running Windows 10.  The Intel HD Graphics Family driver shows "Working Properly" after first reverting back to the Windows 8.1 driver and the Micro-HDMI port works initially.  At some point though, I end up with the device showing disabled and I'm also having Audio issues.   I decided to upgrade the BIOS which went OK (upgraded from Kona BIOS Version 76CN31WW to Version 76CN43WW).  Then I re-installed the Windows 10 Intel HD Graphics Family driver from the Lenovo website (Version 10.18.15.2040 showing a data of 7/15/15 on the website but 6/16//15 once installed).  However, the driver shows disabled as not working properly so I'm not happy. I'll continue to consider purchasing a support option but figure it'll only reap an apology and perhaps some information confirming the problem but I expect paying for support won't result in a working Windows 10 driver any sooner.  I'm not aware how to report a problem like this to Lenovo without paying them to hear about the trouble they're causing me.Let me stop you from wasting your money.  I too had the problem you described.  What I made sure of was that once I installed that 8.1 driver, and in my case, the one dated March 2014, I went into Windows Update and disabled automatic updates.  That is where it kept getting updated for me.  That was a week ago and still have stability using the old driver. Hope this helps.  Intel needs to make a stable Windows 01 driver like yesterday. 

  • Where are LETOOLS for USB? The "ADB" Driver does not work with Windows XP

    I just give up with Lenovo's arcane maze of endlessly-looping driver searches.  I managed somehow to get something called an "ADB Driver" which was supposed to allow Windows XP to recognize my tablet as a K1 Ideapad.  I downloaded the 8+mb file which installed fk knows where and plugged in my K1 tablet.  Windows recognized that it had a USB device, and when prompted to hunt for the driver (which of course I couldn't find, since Lenovo sent it into the ether) I had to back out and then hunt through my entire Windows directory for an inf file containing the word "Android". 
    For the unsuspecting, it hides in something called -- get ready for it -- OEM16. 
    I guess the L, N and V keys were missing on the keyboard of the moron who labeled this pos driver.  Oh good programming Lenovo NOT but since a chimpanzee programmed Lenovo's driver site I suppose it's of a piece that a baboon packaged this worthless driver.  This isn't an eCommerce site it's a zoo.
    I guess it was too difficult for Lenovo to include a CD with their Windows USB driver family on it.  I mean . . . that would have cost them $.0000002.  Jesus wept.
    All I want to do is have XP know that the "USB Human Interaction" device I have plugged in is my K1 Lenovo tablet.  Don't send me to Google for a USB/Windows Android driver, they direct everyone to the site of the manufacturer of the tablet.  And don't insult my intelligence by even countenancing the possibility that Google's arch rival would stoop to offer any means for their OS to talk to (cough hack) Android.
    I get that it has to be a Lenovo driver and/or program.  So where the f is it? because this is massively pissing me off.  And one other thing:  No link to Lenovo.  I don't appreciate being manipulated by Lenovo's flash crap only to land on a driver download site that says "We can't find it."
    No.  Direct me please to any non-lenovo download portal that has the most recent version of LETOOLS and hope I don't have to come back here with yet more frustration.  This is the most needlessly idiotic driver service I have ever had the misfortune of being tethered to and I hope never to have to engage with it ever again.  May I please know where LETOOLS can be downloaded?  Thank you.
    Product = K1 IDEAPAD / Born = September 16, 2011 / Sex = Android 3.1 / Skill with Android = None / Skill with Wi-Fi = None

    Hi know-vo,
    I'm sorry that you couldn't find LETools. I've cheked with internal team and was told that actually we do have the software, but it's called "Synchronization Software". Did you try that?
    If you browse to ADB Driver page by clicking "Learn More" in support site, there is a note indicating that this ADB driver works with Synchronization Software.
    Sorry for all the inconvenience caused and. I hope this info above helps.
    Cheers,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed"

    iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
    '“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.'
    I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
    If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
    '“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.' - this is as far as I can get it to go; most frustrating!
    I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • Need driver for windows 8.1 tablet for m1212nf laser printer

    I bought a windows Surface 2 tablet ( 32) and am not able to get the driver for my M1212nf HP laserjetr
    Please advise if possible
    Thanks in advance
    Etienne Huyghe

    Hello etienne53,
    I understand you would like the software and drivers for your LaserJet  M1212nf for your Surface 2 Tablet that is running Windows 8.1 32bit. Please click on the link for the downloadable HP LaserJet Full Feature Software and Drivers for 8.1. 
    I hope you found this helpful, please let me know if you require more assistance with the download.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I cant find a fonctional Wacom Driver for my x61 SXGA Tablet!

    Hi volks
    i cant find a fonctional Wacom Driver for my x61 SXGA Tablet!
    I installed once the new Bamboo Driver (5.08) from the Wacom Homepage.
    But the Driver didn't wokk, i was written that none supported device could be find.
    So I installed the old Bamboo Driver (5.07) on it, and I had some Problems. I couldnt calibrate my monitor, there was only the arrow when i moved my pen and when i turned the desktop 270°, there was a problem with using the pen: When I went with the pen down, the arrow went up. One positive thing was only that the pressure ability was working fine in photoshop.
    You know maybe which driver i should try?
    http://www.wacom.com/productsupport/model.cfm btw. i cant find this sticker on the Back of my tablet.
    greez

     Since this thread is on the subject of the stylus..........
    I've noticed that when turning the LCD (flipping it over for tablet position) on some units the stylus will stop working. I'm seeing this alot. I've replaced LCD cables, made sure theres enough slack so its not pulled when turning the LCD 180 deg., etc.
         I can't see any types of sensors that would signal the driver or BIOS when the display is flipped into tablet position - but am I missing something. Does the software know when the display in in tablet mode - if so, maybe this problem is indeed driver or BIOS related.
       Does anyone know what could be the cause....and /or the answer here?
                       Thanks........DCO

  • Hard drive upgrade for Yoga 2 13 (model 20344)

    I've looked at message boards with varying answers. Also, I'm not super tech savvy and can't afford (literally) to mess this up, so I came to the braintrust for a definitive answer.
    I want to upgrade my hard drive space on my Yoga 2 13 (currently has 128 GB SSD and 8 GB memory)
    I've read that there is an extra slot for another HD, is that true?
    If so, what type of slot is it?  M.2 or mSATA or what?
    How many GBs can I upgrade to?  I've read anywhere from 128 to 500+ are okay.
    Any brands and models that are known to work?
    TIA to anyone who can help!
    Solved!
    Go to Solution.

    bretonnia wrote:
    I've looked at message boards with varying answers. Also, I'm not super tech savvy and can't afford (literally) to mess this up, so I came to the braintrust for a definitive answer.
    I want to upgrade my hard drive space on my Yoga 2 13 (currently has 128 GB SSD and 8 GB memory)
    I've read that there is an extra slot for another HD, is that true?
    If so, what type of slot is it?  M.2 or mSATA or what?
    How many GBs can I upgrade to?  I've read anywhere from 128 to 500+ are okay.
    Any brands and models that are known to work?
    TIA to anyone who can help!
    1. The Yoga 2 13 has 2 slots: 1 m.2 (that is now used for your SSD) and another connector for a 2.5"  storage device.
    For some models this is a normal SATA connector, but for most it is a very rare SFF-8784 connector that only connects to the 5mm WD HDD.
    And for SSD models Lenovo does not include the special cable ...
    2. Best option is to upgrade to a bigger m.2 SSD and clone your current drive.
    Keep your old drive for the OKR image, so you can restore easily at any time.
    On the new drive you can delete the OKR restore partition and free up 15 GB for data.
    3 & 4. There are many topics on this; search for "SSD Yoga 2 13"
    As the Yoga has a BIOS that does not accept all brands and types of SSD's you should opt for a type that was recommended in that Yoga 2 13 internals topic: Crucial M500 M550, most Samsungs ....
    Link to image
    Top: 2,5" storage device (5mm height WD HDD 500GB) with SFF-8784 connector (disconnected)
    Below: WLAN (NGF M.2) and M.2 SSD on the right (22*80 Crucial M500 240GB)
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums
    Freedom of Speech has just left the building

  • Building wacom driver for tablet laptop

    Hi folks,
    Here's my problem: I am trying to build the latest wacom driver for my tablet laptop so I can use touch sensitivity in gimp and other applications. I seem to missing some libraries or some thing, this is the relevant part of ./configure:
    checking for valid Xorg SDK... "xf86Version.h missing"
    "Tried /usr/X11R6/lib/Server/include and WCM_XORGSDK/xc/include"
    ./configure: line 19566: cd: /usr/X11R6/lib/Server: No such file or directory
    and:
    *** WARNING:
    *** Unable to compile wacom_drv.{o,so} without XF86 build environment
    *** or Xorg SDK.
    *** wacom_drv.o will not be built
    What is the Xorg SDK (software development kit?) and does anyone know where I can get it? Will I have to build Xorg from source? I have done a search in pacman and on the website and can't seem to find anything.
    Note in other distros (ubuntu & gentoo) the package is called linuxwacom.
    Thanks in advance for an help!
    Ben

    Ok, were to start? 
    I've looked at the link to the wiki that Wain posted, there were not much instructions but guess that its just to C&P the package build and run it? So I did but got errors.
    First this.
    '/PKGBUILD: line 189: syntax error near unexpected token `{
    '/PKGBUILD: line 189: `getvar(){
    Then after the dependencies check and just after the "Starting build()..." I get this.
    /usr/bin/makepkg: line 599: build: command not found
    I searched the forum for the line 599 error and found a thread, but it didnt help much.
    But I did a namcap on PKGBUILD if that is to any use.
    PKGBUILD ("pkgname$_cfgname") E: Missing md5sums
    PKGBUILD ("pkgname$_cfgname") W: Missing Maintainer tag
    PKGBUILD ("pkgname$_cfgname") W: Missing CVS Id tag
    PKGBUILD ("pkgname$_cfgname") W: Reference to i686 should be changed to $CARCH
    Im unsure about the whole Kernel compilation part, I must done something wrong.:cry:
    So some help would be appreciated, I realy what my Voltio to work!

Maybe you are looking for

  • [Solved] 27.8.4 How to Create a VO on a REF CURSOR - Missing first row

    Searching the forum I found: BC4J - Get one less row from view object. Dive into BC4J related  --REF CURSOR (Resultset) The first message did not have any answers, and the second had a follow up question - still no answers though - and I thought I wo

  • How do I back up my contacts from my iPhone to iTunes

    My mobile phone carrier (optus) is preparing us for the delivery of the IPhone 4, and to get ready they are changing us from our old SIM card to a new "MicroSIM". I am confused with step 1... Step 1. Connect your current iPhone to iTunes to back up y

  • Can't connect to wireless printer from Mac

    I have 2 wireless printers.  My Macs can connect to one, but can not find the other.  My PCs can connect to both just find.  The printer I can't connect to is a Lexmark 4650.  I'm running the install CD, but when it tries to find the printer, it does

  • AHH! Help! colors (not b&W) are negative - blue to orange etc..

    All colors (not black and white) are inverted. the ol' universal access trick / control/opt/cmd/8 trick doesn't work! tried recalibrating colors to no avail.

  • Named query

    hi all, i am newbie in toplink. i want to define a named query in toplink mapping workbench (for example test). how can i call this named query and execute it. need help