AdbeRdrUpd1001_Tier1.msp Update Does Not Install using Nullsoft

Hello,
I am attempting to use the Nullsoft Scriptable Install system to install the Adobe® Reader® 10.0.1 update on Windows XP SP3. I determined that the Adobe update will install as expected when I run the msp on a console command line with the following arguments:
C:\temp\> AdbeRdrUpd1001_Tier1.msp /passive /norestart
However, when I put the same exact command into Nullsoft script, the update does not get applied. I have a theory that the Tier1 update needs to determine language information from Windows XP and because the Nullsoft script executes in a Windows environment that is not fully initialized, the language information is not available and the update fails. If you can expand on this or provide any insight please respond to this message. Any help with this question would be greatly appreciated.
Thanks, Jeff

you could start by uninstalling the HP Update program from Add/Remove Programs.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

Updates will not install using App Store on 10.7.5

Updates will not install using the App Store. I am using a MacBook Pro on 10.7.5. When I click the button labeled "update" in App Store, the little wheel in the upper left-hand corner continues to spin forever (I waited 12 hours one time) but nothing happens. No updates will install. My Macbook Pro has always operated without issues since I bought it new in 2009, and I have a reliable, fast internet connection.

Let's try a test here.
Make a new User Account, and try to update from there.
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468

Help - Logic 8.0.2 update does not install

The Logic 8.0.2 Update does not install on my machine. The installer goes through the motions very quickly and my Logic Pro app still indicates version 8.0.1. Logic node, Waveburner, etc. all seem to have updated to the .2 version. After not taking with Software Update, I downloaded the updater and that didn't work as well. I have also tried trashing the appropriate Receipt packages (though there was no Logic 8.0.2 receipt). Any help would be appreciated!!
2x2.66 dual core Mac Pro, OSX 10.4.11
Michael

Thanks for your help, Erik. I just got off the phone with Apple support and the solution was dumber than dumb: somewhere along the line Logic Pro was renamed "Logic Pro 8" to distinguish it from ver. 7 still on my system. Renamed it "Logic Pro" and voila, the installer recognizes it!
"mistakes were made..."
Michael

Viewer Builder update does not install

The Viewer Builder update (Viewer-Builder-1.7.0-RC.dmg) does not install. After downloading and removing Viewer Builder from the Applications folder, this update does not install.
Steps:
- Removed Viewer Builder app from Applications folder
- Download update from Adobe Site
- Click to install
- Opens package and performed some kind of install activity. There are no prompts and quickly finishes
- No Viewer Builder installed.
Any insights on to this would definitely help.
Adobe DPS on MacOS Lion

upgrade folio builder tools does not work..
this morning I tried to update the folio builder tools, from out of indesign cs5.5 on a windows PC..tried 5 times...still get the update message in the folio builder panel in Indesign.
this afternoon I tried the same on a completely different windows machine...same result...the thing does not work, no upgrade gets installed, I tried 20 times, even also the other tool....????????
2 days ago, I tried it on an other machine and it worked fine....
regards..Anne

Why Software Updater does not install some updates automatically?

QuestionWhy Software Updater does not install some updates automatically?
AnswerSoftware Updater only installs security-related updates automatically. Non-security-related updates, and service packs installation are required to be initiated manually via the Software updates tab under the Policy Manager Console.
In Policy Manager 12, a checkbox Show non-security-related updates has been introduced under the Policy Manager Console > Software tab. Unchecking the checkbox hides the following update types:
Microsoft security tools
Non-security updates
Service packs
Note: This checkbox is Policy Manager Console-specific setting. If you change the setting in one Policy Manager Console, it would not affect another Policy Manager Console connected to the same Policy Manager Server.

amrok90 wrote:
Updater does not detects 5800. I've reinstalled everything as it's stated (as, according to FAQ, sometimes the drivers may get corrupt). Restarted the PC. Nothing happened.
Presumably FOTA not an option for your 5800XM?
Happy to have helped forum with a Support Ratio = 42.5

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

Droid X2 2.3.4 OTA update does NOT install on my phone

Hello,
Today, when I checked for software updates in the settings page of my Motorola Droid X2, it said the 1.3.380.en.US is ready to be applied. I downloaded it and clicked on install once download finished.
The phone reboots, shows the logo and the progress bar for installing the update and then shows an exclamatory mark. The progress bar also stops. Then the stupid phone reboots and when I unlock it, it says the update has failed.
This is unacceptable from a smartphone and I am already **bleep**. Firstly, the phone has 10's of issues (music stutters, etc.) and many people complained about it. And Motorola releases this update that is supposed to fix those issues. And now, the update does NOT even install. Why? Please let me know what I am doing wrong. Or is anyone else facing this issue? Do I have a bad phone and should I replace it?
Please help!
A very very frustrated Droid X2 owner.

I can't speak specifically to the DX2, as I have the original DX ... I assume you've tried a Battery Pull ?? Just power it down, remove the battery and leave it out for like 1 minute - reinsert & power up. See if it proceeds with the update ... if not, you'll likely have to do the factory Reset. If you have data on your SD Card that you want to preserve make sure you don't select "Format SD Card" -- or just remove it entirely before starting the F.R. process.
If you take it to Verizon or call them, they will likely walk you through, or do, the factory Reset anyway .. And since you seem to have "10's" of issues, this might be the best path for you to take anyway ... and in fact if it were ME, I would just bite the bullet, allow the Format of the SD Card, and be done with it .. Of course you'll have to re-download all of your FREE apps after doing so. And if you can't get the phone to boot up, that in itself can be a challenge because Market won't know about them after you do the F.R.
So if you decide to do that, I would go ONLINE to MARKET and write down a list of all your Free Apps before starting the process.
Good luck ..
http://community.vzw.com/t5/DROID-X-by-Motorola/Factory-reset-the-what-why-and-how-for-Gingerbread/m-p/544836#M24742

The adobe version 10 update does not allow use of tabs

I had tabs working ok on my laptop, then an adobe update to ver 10 has stopped the tabs feature working. I get all sorts of notices about this being embarrissing to Firefox and analysing the problem. But nothing is offered. Everything locks up when I try to open tabs. Seems trawling q and a that this is not a prob unique to me. Do Firefox actually moniter this feedback and offer some hope of resolution?

Jeaninefromca wrote:
Apple does not allow use of Adobe Flash with the IPad. Is it all right to use Bridgebaseonline with a Mac that is synched with an IPad?
Flash is not available for the iPad. If Bridge Base Online requires Flash, there's nothing you can do on the iPad, unless Bridge Base Online has an app in the iTunes App Store.
You may want to try an alternate browser like Skyfire or Puffin. No guarantees.
I have not been able to synch Ical and Iphoto with my IPad. I've been to the Genius bar 5 times and on the phone twice to try to resolve this problem.
iBook, Mac OS X (10.5.2), I cannot synch my IPad with IBook
This is a separate issue than what you stated in the subject. Syncing recent iPhones and iPads that have iOS5 on them require iTunes 10.5, which also requires OSX 10.5.8 on your Mac. Your profile says you have 10.5.2. If that is correct, you need to update to 10.5.8, then update iTunes to 10.5, if you haven't already done so.

HT4623 the update does not install

The ios7 update will not install on my 4s phone it tells me an error occurred

That's too bad.
When actually ready for help, provide details of the issue including the specific error that is occurring.

CC desktop update does not install

I am getting error message A12E1 when I try to update my CC desktop software. Now I can't launch the desktop app.

Hi P.mckee,
The following thread has vital trouble shooting steps :
http://forums.adobe.com/message/5593076
Also
There are several steps you can do:
1. If your are getting this error while updating CC:
(a) Try to perform mentioned steps:
Win: Go to C/Program Files(X86)/Common Files/Adobe/OOBE/PDApp and rename it to PDApp.old. Try to install again.
Mac: Go to Library/Application Support/Adobe/OOBE/PDApp and rename it to PDApp.old. Try to install again
If the above mentioned steps does not work please follow the mentioned steps:
Win: Enable hidden Admin: http://social.technet.microsoft.com/wiki/contents/articles/3040.enable -disable-the-local-hidden-built-in-administrator-account-in-windows-7. aspx and try the above mentioned steps in hidden admin account.
Mac: Enable root account: http://support.apple.com/kb/ht1528 and try the above mentioned steps.
Disable your security software and try installing again if stiil the same issue
Please let us know if it was useful.
Regards
Rajshree

Following Plugin Update Does Not Install New Flash-player Plugin

openSUSE 12.1 64 bit computer.
I removed all of the openSUSE installer default Flash-player apps and installed the new rpm. via Yast. Closing and reopening Firefox does not implement Flash-player, nor is it include in Tools/Addons/Plugins.
This used to work in the previous Firefox version.
Please advise.
Thanks in advance.

Did you also try the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg ?

Apple software update does not install software

Why does apple software update not install software. System 10.6.8 ?

Hello:
What do you mean? What happens when you run software update?
Barry

New update does not install at all , but keeps coming up

four times your update comes up. I hit the update button and then
this stripped line in a slender box saying it is trying to connect with the server comes on and stays on forever. nothing happens so I shut it off. it is now bugging me stop send me a update taht does not work

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Update does not install, daily.

A month of "your update failed to install' messages interrupting daily use of my phone, I spent 5 hours today trying to fix a Samsung Galaxy 3. Fifty Five minutes at Verizon store and they put me on the phone with Verizon who then called Samsung. Samsung said that I needed to go see the Best Buy Samsung specialist. Got in the car, drove 30 minutes to Best Buy to be told the Samsung specialist just left for his hour long lunch break (I get 20 minutes - must be nice). I returned to be told that my device was reading it had a 'custom' root and that the warranty had been voided. When I said that I had no idea how anything could have been changed on my phone, they sent me back to Verizon saying they did it. In the car again then back in line at Verizon. Verizon said they did not and got on the phone again. Samsung said I need to mail them the phone, being without one for two weeks, and that there tech support (one that has better skills or equipment than the tech support they made me drive to?) would then look at my phone. If I had done something to void the warrenty their tech support would call me to tell me how much money I would need to spend in order to have updates download correctly. Five hours - no repair and the only offer for help was to hold my phone, that is still under warranty, held hostage. I am appalled and livid.

A month is too long to have failed updates, ellencav. I know you mentioned you have a Samsung Galaxy 3. Can you clarify if you have the Note 3 or galaxy S 3? Was a warranty replacement offered through Verizon tech support? This way, as long as you met the terms of the warranty, a replacement would be shipped to you and the defective device would be shipped back.
AndreaS_VZW
Follow us on Twitter @VZWSupport

HT1339 ipod software update does not install

I have an ipod touch stuck in restore mode
Itunes is trying to download OS6.1 in the restore process, but this is not installing and I go back to the starting point.
any ideas?

Hello:
What do you mean? What happens when you run software update?
Barry

AdbeRdrUpd1001_Tier1.msp Update Does Not Install using Nullsoft

Similar Messages

Maybe you are looking for