Adbove Reader stops printing after 10 pages

We have encountered
a problem printing a pdf document wit hover 100 pages
. From two computers on two Ricoh network printers, the print
job stops after 10 pages.
This is happening consistantly.  We contaced Ricoh and performed extensive diagnostics to no avail.  Anyone have any ideas on this?

I have a similar problem, except i'm attempting to print documents that range from 200 pates to 1,700. Things start off fine but then it will simply stop printing without any error messages. I believe the problem is a combination of Adobe X and the new print driver that was recently installed, but I can't seem to convince our IT person of that.

Similar Messages

  • How do you stop printing test page everytime you turn on printer

    Have psc1350 all in one. How do I stop printing test page everytime I turn the printer on.

    The page that is printing is an alignment page.  It will be printed after a cartridge is changed, and will continue to print when the printer is turned on if the alignment is not successful.  After the alignment page prints you need to place the page face down on the scanner glass and press the "Scan" button to complete the alignment.  See your user manual for details.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Reader stops when after loading document.  Says stops working!  It will load without any document!

    Reader stops when after loading document.  Says stops working!  It will load without any document!  Help!??  This has been going on for several months.  Help!

    What is your operating system?  Reader version?

  • Printer stops printing after 2.5 pages

    The last three times I have used the printer to print multiple copies of a page the printer has printed out about 2.5 pages then stops printing.  The printng always stops at the same in the document.  I am printing in wireless mode from a HP laptop.
    This question was solved.
    View Solution.

    Hi,
    Microsoft has released an Hotfix which should address such an issue.
    Install the Hotfix below and check for any difference:
    http://support.microsoft.com/kb/3000461/en-us
    Please let me know if that help getting the problem resolved.
    Regards
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • 6980 wont stop printing report pages

    Help-My 6980 Deskjet has recently started printing report pages after every print job.  It seems to go into quiet mode on its own, prints the job and then continues to print multiple report pages until I turn it off.  Of course I'm out of warranty so no help from support.

    Sorry using XP PRo with a wireless connection.  No troubles there.

  • HP LaserJet P-1006 printer stopped printing after Windows update

    One day this printer stopped printing.  Items were queued, wouldn't print. 
    Tried changing cables. 
    Uninstalled and reinstalled HP software.  
    Ran HP Printer and Scan Doctor.  Says it fixed Printer spooler error.  Won't print test page.  It's queued.
    Ran Windows troubleshooter:  Printer Spooler service isn't runng.  However in Services, Printer Spooler is Started, Auto.
    Installed on laptop -- printer prints fine. 
    I'm stumped.
    Any help would be greatly appreciated.

    Warbler, welcome to the forum.
    It would be better if you started a thread here.  You will receive more replies.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • PSC 2355 all in one stopped printing after windows 8.1 upgrade scan is OK.

    I have a HP psc2355 printer which was working happliy in Window 8. I downloaded and installed 8.1 from windows store and the printer no longer works!
    With  the printer status window open (via the windows control panel) the document detail appear briefly after clicking on the print button. Nothing happens at the printer end. Theres nothing wrong with the printer as I can use it on another PC without problems.
    I have uninstalled and re-installed the printer using hppiw 2012-10-31 and run the HP Print and Scan Doctor V 4.1.0.29 which gives a device error "your printer is in a busy state" after any attempt is made to print  from applications or from printer/properties print test page.
    printer self test prints OK.
    scanner works OK
    Printer is connected via USB cable rirectly to PC USB port
    windows update ran this morning
    3 hours wasted so far!
    This question was solved.
    View Solution.

    ****SOLVED*** Printer Properties Advanced Tab Print Processor Change settings from Print Processor hpzpplhn to winprint check Default data type is at RAW Printing OK now HP got any support jobs going?

  • Stop printing multiple pages on one sheet

    When printing from Acrobat or Reader, the print preview and settings show that I am printing a single page on one sheet of paper. However, it actually prints two pages side-by-side on one sheet of paper. How would I stop this? This is the only program that does this. I have checked all printing settings in all Adobe products as well as the printer settings in the device's properties. Your help is greatly appreciated.

    It seems like an issue the with PostScript drivers installed on the machine. Did you install the latest version of PS Drivers on the customer's machine?
    You can also check this:
    Click on Advanced
    Select PostScript options
    Select Language Level 2
    and then try.

  • How do I get apps 2 stop printing after they've been stopped on the website? It still prints.

    When I first bought the computer I clicked on the daily recipe printing app and after a week of wasted ink, I went to the website and stopped the print (or so I thought). I even removed the app, but it is still printing. I can't afford to keep printing this every day. I just want it to stop printing. Please help.

    Hello dhhinkle,
    JamieAtHp has posted a lot of good information on this subject. You may want to click on the link below, it is a document that can take you through on how to resolve your scheduled delivery issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03105488
    If you have any questions or comments on the document or the issue, please post again.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Satellite A205 - SD Card reader stopped working after Win 7 upgrade

    Satellite A205-SP5818
    I recently upgraded to Windows 7, and, among other things, the SD Card reader stopped working. I already downloaded and installed the driver offered in this site: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2190493& rpn=PSAE3U&modelFilter=&selCategory=3&selFamily=10 73768663 (it's the next-to-last driver shown) but it went from not working all together to making funny noices when I insert the SD card... and then not working.
    Any ideas of other drivers that might work, or any kind of other solution?
    Thanks.

    Hi
    Try to remove eh SD card controller from the device list.
    Then reboot the unit.
    After that windows will ask you for an driver.
    You can download this driver:
    [SD Driver, Flash Memory v2.0.0.7|http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
    You should unzip this package and has to point the driver files in this folder
    This should helps to get the SD card reader working again

  • Epson 4880 stopped printing after installing ver. 9.17

    Epson 4880 stopped working after installing ver. 9.17 driver.

    I can't help thinking you may need to reinstall Mavericks. Most people (>99%) aren't having these issues! If you count the number of problem posts, then divide by millions, you'll see what I mean.
    I'm fairly certain the Gutenprint drivers support your 560 (can't know for sure because you didn't give the whole model name).
    http://gimp-print.sourceforge.net/MacOSX.php
    (feature support in Gutenprint drivers is "different." Some people really like it - others not so much)
    For the Epson, (which I have 3 of) it is not possible to pinpoint what the issue is (printer or Mac), until you get it printing.
    Part of what Resetting the Printing System does is restart the CUPS daemon, which re-creates the index of where to find each driver. So try Resetting the Printing System:
    OS X Mavericks: Reset the printing system

  • W540 - Fingerprint reader stops working after sleep

    Once again the fingerprint reader stopped working.
    When I run the Lenovo Solution Center (v2.7.003 rev 19975) all appears normal. When I go to [Security]>[Fingerprint] I get a <Status> that it is enabled.
    However when I [launch] > Fingerprint Manager Pro (v8.01.35 x64) I get the device is not connected.
    See the pictures.
    This occurred after coming out of sleep, and warm boot or cold boot did not change anything.  It's now been 3 days.  I have no idea what the hardware is doing as there are no lights.  I did not install any new software, aside from the normal AV updates (MS Security and Malwarebytes ONLY! each aware of the other).
    Administrative event logs do not reveal anything.
    Device manager has no warning, neither does it show the fingerprint reader.
    Scanning does nothing,
    Any workaround ???  Any one else with these symptoms.  I can deal with software, and drivers, but I cannot deal with failure to have hardware switches, lights, and other missing workstation attributes.
    re: Lenovo W540 20BG, 32gb, Win 7 x64, BIOS 2.17, Samsung 1tb EVO

    It's an on / off issue.  Partly software and hardware.  I think it a USB / reader problem.  Only occurs occasionally when going to sleep. I do use Zentimo, so that may cause a disconnect when sleeping or at the very least let me know that a disconnect occured.  I just type my user PW, as the reader's surrounding surface is now glossy,  Never had that problem with other high gloss chassis. Oddly the track pad is immaculate and not shiny!
    Reader resumes - in most cases - after cold boot with power off for a while.  If I do a warm boot, the reader remains innactive and disconnected.
    So far the machine from a software side is tamed and works great, it the harware interface with the internals that is a POS.
    If the machine works great, it's because of Intel, nVidia, Micron, etc.  The user dialog to the hardware is missing when PROBLEMS (not issues) occur.
    Thank you for your concern.  Hopefully these issues will be resolved after my yearly update. Albeit, Win 10 concerns me <vbg>.  I think MS Win 10 will go the Adobe route, with a yearly subscription after the free 1 year.

  • How can I set my printer to stop printing blank pages?

    It started at 3.6.10 update in FF. Now, printing blank pages. About:config does not show with a list of preferences. I can't find any preferences. Using XP

    Lowercase '''a''' = '''about:config'''
    Try a '''''reset''''' of all preferences for that printer as described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • 8625 stopped printing after windows 8.1 update

    my printer has been working without any problems until there was a windows 8.1 update on feb 11. it just stopped printing from my dell laptop. the print job appears to be added to the queue and it spools, but then nothing happens and there are no error messages. it still works from my iphone/ipad and it prints when i send a document to the printer email address. just not straight from the computer. i have updated EVERYTHING on the laptop. i have uninstalled/reinstalled the printer software several times. i have uninstalled all of the windows updates from feb 11, 2015. nothing works. i'm not super techy. i assumed a driver was missing or something wasn't compatible from the update so those are the fixes i've tried. and in the process i've messed something up so now not all links work in internet explorer. i've now been working on this since sunday. help!!!!

    Hi @deannesab 
    I would certainly be happy to help you with your Officejet 8625. I understand you are no longer able to print since updating to Windows 8.1 and that you can still print from other devices such as your iPhone and iPad.
    Please complete the solutions presented in the following document and let me know the outcome of your efforts; HP Printers - Print Jobs Disappear from the Print Queue and Do Not Print (Windows 8).
    I hope this helps and look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Canon BJC85 stopped printing after change of ink cartridge

    Hello,
    my mother uses the small Canon BJC85 in combination with her Mac mini. But after she changed the colour printing head against the black only printing head, she can't print any more with the standard driver (GIMP works, but the quality is bad).
    Each time she tries to print, printing is stopped without further explanation. After searching for a while, I found in an error.log at /var/log, that the driver posts an error message there stating that the print head doesn't fit to the setup. But I don't know how to change the setup (and anyhow, this is a Mac! It should change the setup by himself?!). I posted the question at the canon support page a week ago, but didn't get an answer.
    Any ideas from you who to clearify this? Resetting the printing system as described in Apples other forums doesn't help.
    Thanks in advance,
    Gernot

    Solved by buying a laser printer from OKI.

Maybe you are looking for