ADC for Domestic Purchase not flowing in MIRO for particular MIGO Document

Hello Experts,
    We've a scenario in which we pay ADC to domestic vendor. The procedure we follow is as below:
          1. Condition record for JAOP with 0% rate maintained in FV12.
          2. PO created with JMOP 10%, 2% ECS, 1% SECS & 4% VAT.
          3. During MIGO (also excise invoice capture), AED value is maintained
          4. After J1IEX, at the time of MIRO this ADC along with other duties flows in simulation
    Now in my case, there are number of GR documents for which MIRO is performed, but for particular GR, ADC is not flowing in MIRO and also excise duty is incorrect, it's not flowing from GR.
   So what is the probable solution for this, I've already checked MIGO & excise invoice documents & found to be ok.
Thanks in advance
        Amit

Hi,
Have you maintained material price including AED price??
If yes then check whether you have maintained JAX1-100% or not?
I think this should be treated as a dealer purchase as you are maintaining 0% amount for JAOP.
Regards,
Piyush

Similar Messages

  • Correct values not flowing in MIRO when values are changed in J1IEX

    D/ Friends,
    In Purchase Scenario with mov typ 101, when we capture excise duty thru T.Code J1IEX, sometimes we need to change the Duty Rates as well as Excise base Value (i.e.***. Value). We change these 2 things & we also change the BED, ECess & SH Cess values manually. Thereafter we do GRN & then post the EI.
    Now the issue is that when we do MIRO, the duties Posted in EI in J1IEX, are not flowing in MIRO. Pls note that such scenario is occurring only when we change the above 2 things in J1IEX. Pls advice.
    Rgds.

    pl check excise defalt for your tax procedure  JCV1  condition assigned  or  not.
    regards
    karthik

  • Baseline date not flowing in MIRO transaction

    Hi
    Baseline date not flowing in MIRO while doing transaction.
    We have maintained Payment terms in vendor master record
    and payment terms maintained in PO also.
    We have done the GR posting.
    please help
    Thanks and regards
    Aakash

    Are you use an MIRO with amount split? and does your payment term is configured with "No Default Date'? Then refer to OSS 495303.

  • Received a email from Apple stating that my Apple ID was used for a purchase not on my device. It had a link to cancel purchase but asked for my email and password which I gave then it wanted my credit card info! I didn't give that,what should I do?

    Received a email from Apple stating that my Apple ID was used for a purchase not on my device. It had a link to cancel purchase but asked for my email and password which I gave then it wanted my credit card info! I didn't give that,what should I do? Do you think this is just a way to get my credit card information?

    It sounds like a phishing email. You can't "cancel" purchases. You've now given them your AppleID and password, so you should immediately change your password to something new and very secure.
    Also watch out for suspicicious activity on your account.

  • My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

    I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

    You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

  • ADC for domestic purchase

    Hi
    I need help regarding the scenario described below -
    my vendor imports a material and passes the Additional duty on customs (ADC) to us. we need to take credit for the ADC paid. however i am finding it difficult to approach the problem. there is a note by SAP for the same but it is not very clear too. can anyone who has faced a similar issue help me out.
    thanks in advance

    HI
    Treat this case as dealer case.
    What exactly you could not understand in the SAP note?
    did u check notes 910681,964190,

  • PO Conditions not flowing in MIRO

    Hi,
    This is a case of Import Purchasing where Invoice Verification (for Custom/CVD) is done before goods receipt.
    It is observed that in the screen MIRO the condition values (for duties of Custom/CVD) are not flowing from PO although values are maintained in PO. Amount and quantity need to be entered manually in MIRO in this case.
    Is this a standard behaviour of SAP that if IV is done before GR then condition value doesn't flow from PO and need to be entered manually in MIRO? And is there any way out / work around in order to get the condition values flown from PO to MIRO if IV is done before GR?
    Can any one assist in getting this query resolved?
    Thanks in advance

    yes, this is the standard behaviour. In import procurement we need to enter manually the value of conditions.
        No, there is no any customization through which we can get the flow of value automatically.
    But, u can drag the value and qty of conditions---
               when u will do IV against the layout of PLANNED DELIVERY COST, there u will find the right side two columns Recieved QTy and Value. from that columns, u can drag the value and qty.
    thanks

  • Additional Duty of Custom (ADC) in Domestic Purchase

    Dear Experts,
    When we purchase import material from domestic Market, the vendor will pass on his CVD, E Cess, SHE Cess and Additional Custom Duty to us for which we will get CENVAT Credit. But these duties we will not know at the time of creating PO.
    For the above scenario we are creating the PO for Gross Amount and we are maintaining all taxes @ 0%. At the time of capturing the Excise Invoice we need to enter actual duties paid by vendor but system is not allowing to enter any amounts.
    This can achieve by clicking MRP indicator in Miscellaneous Tab, but there is no such indicator at the time of capturing, the same is available in change mode of excise invoice.
    For above said Additional Custom Duty we will get 100% credit in the current year for Capital Goods as well as input Materials. But the issue is while posting Excise; system is taking the credit only 50% instead of 100% for Capital Goods. The same is working fine in Import Cycle. How do we achieve this?
    For the information we are using ECC6 and TAXINN procedure.
    Thanks in Advance
    Regards
    Ratnakar

    Dear,
    U r doing the wrong practice
    u need to create the condition types for the CVD (they are total seven condition types)
    u need to manualy change the CVD amount at the time of GR.Again GR is done after the MIRO.
    there is lot of configuration requied as far as CIN is concern.
    Better u read the SAP Help or search for the SAP notes for configuration
    regards,
    SNB

  • AED for domestic purchase

    Hi,
    Is it possible to take 100 % credit of AED in the same year in case of a domestic purchase of a capital item.If possible what settings needs to be done.
    Now system is only allowing to take 50% in the current year and the remaining 50% is posted to on hold account
    Regards
    Edited by: Dayanandan Kamath on Feb 2, 2012 11:03 AM

    As per excise rules it is not possible to take the 100% credit in the current year,Presently we are allowed for 50% only in current year & balance 50% next year, though some company do the transfer of capital goods to other location & taking settof of 100% in current year, but in that case they pass the JV to the other location & then on other location same concept is applied of 50-50,
    I think rules may change from 1st April 2012 when GST will be applied.

  • Baseline date not default in MIRO for Invoices posted against STO Pu.Order

    Hi All,
    Baseline date doesn´t default in MIRO for Invoices posted against an STO Purchase Order.
    We are trying to post an Invoice in MIRO with reference to a STO Purchase Order for planning delivery cost.
    Delivery cost in PO has not got the Vendor number because conditions are customized not possible to process manually so in MIRO the system asks to enter the Invoicing Party and then the baseline date.
    The client requires that when the invoicing party is enter manually in MIRO, the term of payment should be pick up from Vendor Master Record.
    Could someone confirm if this possible ?
    Thanks and regards,
    Laura

    Hi Laura ,
    The payment terms in Invoice are taken from PO only .
    Refer SAP Note : 177224 for more details.
    Regards
    Ramesh Ch

  • Migo reference document not appearing in miro for frieght conditions

    Dear all,
    I ahve done migo for a po and i have checked GR based invoice in PO.When i am doing MIRO i am not getting the migo reference number for frieght condition where as the migo reference number is appearing for base price.How to get that migo reference number for frieght conditions also.
    thanks in advance
    regards
    vithal

    Sometimes the the MIGO creator might have reversed the same. In such cases the reversal document may be with different number in the same series and both posted & reversed documents will not appear in MIRO. Since you might checking with posted document number, you are seeing the blank in MIRO. In such cases, just enter the PO number in MIRO, give date & reference number press Show PO structure button in the left corner. You will find the following screen
    Expand the required once. The following screen appears. In this both positive & negative numbers with same reference & document type appearing are the reversed documents.
    Hope this is clear

  • Receipt for app purchase not made

    I have received a receipt for 2 apps which I have not purchased not are they loaded on my itunes app page.  How do I remedy this problem, Thanks?

    the receipt would have been originally emailed to you.

  • Table for open Purchase order and pending invoices for vendors

    Hi,
    Are there any table to know open Purchase orders and pending invoices for vendors.
    Quick response will be appreciated.
    Thanks & Regards

    hi,
    Purchase Order:
    S011:(PURCH: Purch. Group Statistics)
    Statistics (SSOUR)
    Version (VRSIO)
    Month (SPMON)
    Day (SPTAG)
    Week (SPWOC)
    Posting Period (SPBUP)
    Purchasing Org (EKORG)
    Purchasing Group (EKGRP)
    Vendor No (LIFNR)
    S012: (PURCHIS: Purchasing Statistics)
    Statistics (SSOUR)
    Version (VRSIO)
    Month (SPMON)
    Day (SPTAG)
    Week (SPWOC)
    Posting Period (SPBUP)
    Purchasing Org (EKORG)
    Purchasing Group (EKGRP)
    Material No (MATNR)
    Plant (WERKS)
    Info Record Category (ESOKZ)
    Material Group (MATKL)
    Info Record (INFNR)
    Country (LAND1)
    EINE: (Purchasing Info Record: Purchasing
    Organization Data)
    Info Record (INFNR)
    Purchasing Org (EKORG)
    Info Record Type (ESOKZ)
    Plant (WEKS)
    EKET: (Delivery Schedules)
    Purchasing Doc (EBELN)
    Item (EBELP)
    Delivery Schedule (ETENR)
    EKPO: (Purchasing Document Item)
    Purchasing Doc (EBELN)
    Item (EBELP)
    EKKN: (Account Assignment in Purchasing
    Document)
    Purchasing Doc (EBELN)
    Item (EBELP)
    Account Assignment (ZEKKN)
    EKKO: (Purchasing Document Header)
    Purchasing Doc (EBELN)
    EORD: (Purchasing Source List)
    Material No (MATNR)
    Plant (WERKS)
    Source List No (ZEORD)
    thx,
    Ganpat

  • Im looking for a good note app with pen for taking notes ( in english and german )during business trips. Can anyone help

    I'm looking for a good note app with pen function for taking notes ( in English and German ) during business trips. Can anyone help?

    Really sorry to hear about this, particularly when you're putting your life on the line. But Apple cannot track your iPhone in any way unless you had set up Find My iPhone prior to it being lifted.
    It's possible that AT&T might be able to do something, but it's probably that they cannot track it, or will not without a request from an authorized law enforcement agency, but rather would only disable the device. You'll have to try and find a way to contact AT&T directly and ask if they can do anything to help you; the chances of any AT&T employee in a position to help you spotting this thread it pretty small.
    Good luck, stay safe, and come home soon.
    Regards.

  • VSOM 7.5 login fields for user/pass not showing up anymore for some users under internet explorer

    Team,
    some of my users are experiencing the issue that our russian friend had:
    https://supportforums.cisco.com/discussion/12304681/vsom-751-does-not-started-ie11
    However we are running the english interface and had no issues for a while (not sure for how long as the users infrequently use the system)
    When navigating to the login screen there are no fields for the user to enter their credentials in internet explorer. Tried IE 8 - IE 11. Played with compatibility mode and safe sites etc... without success.
    Firefox works without issues and so does chrome for the login.
    Anyone run into this issue in the past couple of weeks?

    Yeah it is working now, it may have been a reboot Thanks!

Maybe you are looking for

  • Need to be able to block area codes or allow only from specific ones

    One of my numbers is receiving calls from several soliciters from Oregon, and all are robo dialing applications that you cannot ask to be removed from.  Since, I don't know anyone from Oregon, I would like to block the whole area code. I am also on t

  • New MBP Icon not Showing up in Shared

    First off, love the new MBP. Situation is: the computer name shows up in the sidebar of the Finder in the Shared items on the network on my MacPro, but there isn't an icon next to it. Any ideas why this might be? Message was edited by: PacNW Message

  • Import photo in jpeg-format from email

    when I try to import photos in jpeg format from an email a window appears :" unreadable data " and the photos are not imported in the library of iPhoto, my iPhoto version :5.0.4 (263)

  • Layer group visibility toggle

    With the help of this forum I obtained a script  which toggles the visibility of a specific layer without  selecting the layer. I would like to find out if the same functionality can be achieved for a layer group. In other words can script toggle the

  • Oracle Best Practices Discussion Pros/Cons of using Synonyms

    Please share your experience given the Pros/Cons of Developing Enterprise Database Applications using public and private Synonyms. My recommendation to developers on my team is to avoid using Public Synonyms in their code and instead Fully Qualify th