Add a landscape page in the middle of portrait document?

I need to have one page with  landscape orientation in the middle of a document that's otherwise got portrait orientation. I tried to add a disconnected page, and create a new master page, but I can't seem to get it to change the paper size for just that master page.  I went to Format>Page Layout>Page Size and set the new size, but I got an error message that says "The new page size is too small for some custome master page column layouts.." It seems to want to change the layout of all of the pages. What's the correct way to add this page?
Thanks

The text frame has to be oriented in a horizontal manner for text entry.
If your table is wide, then create a rotated landscape master page. There's a tutorial on the Scriptorium Wiki for this at:
http://wiki.scriptorium.com/tiki-index.php?page=Adding+the+LandscapeRight+master+page
It's also described in the FM User Guide (or online help) in the section "Creating and editing custom master pages" as "Creating a rotated master page", the location in the Guide will vary depending upon your specific FM version.

Similar Messages

  • Is it true that Pages cannot insert a page into the middle of a document?

    Is it true that Pages cannot insert a page into the middle of a document?
    I have tried this many times using different techniques and it just refuses to do it. Can anyone help?

    To see how Pages works:
    Menu > View > Page Thumbnails
    When you click on the thumbnails each Section is outlined in yellow.
    Click where you want a new page > Menu > Insert > Section Break
    But then to have a new page all you need to do is add content to fill the page or Insert > Page Break to force the insertion point over onto a new page.
    Peter

  • Is it possible to insert (or add) a blank page into the middle of an existing chapter of a book created with iBooks Author?

    I have one LONG chapter in my book and feel is necessary to make some edits that include additional pages within the chapter itself.  But when I INSERT a page or press the +Page prompt as I have my chapter open to the place I wish to insert a page, the new page appears only at the END of the chapter and not at the point within the chapter that I would want the new blank page to appear.  What gives?  Another under developed software bug, or....?
    Anyone else have the same issue and has been able to overcome it?

    A new page is always dropped at the end. The only option I have found is simply to copy and paste everything down one - or as you want to adapt it.  I assume its not a text only book or the text would flow and add pages as required.
    Its not a bug or under developed.... its  the Apple Way

  • How do i add section on page to the beginning of a document

    i have finished a pages document but i need to add a  new section at the beginning of the document how do i do this?
    and how do i flatten my document so everything in anchored down and not moving

    Assuming Pages v5 on OS X, you place your pointer at the top of your document, and then Insert ▸ Section. You can verify this by View ▸ Show Page Thumbnails.

  • Is there any way to insert a blank page in the middle of a document (rather than at the end)?

    I can do this in Word, but not Pages. I'm using Pages '09 Version 4.1. Any help would be appreciated.
    Thank-you!

    You can also click at the end of a section and insert a new section from the Sections link on the toolbar.
    Basic rule is if you are clicked in the text, then the new section will go after the current section.
    If you are not clicked in the text then the new section will be at the end of the document.
    A section obviously does not fit inside an existing section.
    Peter

  • Can't add new page in the middle of document

    I am creating a manual and inserted page breaks at the end of each page as I created the document. Now I am trying to add a new page to the middle by inserting page breaks and even section breaks, but every time I try to add it in, it just goes to the bottom of the document and I am unable to move anything into the original 50 pages. Any tips here?
    When I look at the thumbnail view of the document it has all 50 pages in one yellow box instead of one page individually. A bit odd.

    The thumbnail browser shows one small page thumbnail for each page of your document. Each yellow bounding box indicates a section. So the thumbnail browser indicates your document has a single section with 50 pages in it.
    As you've typed your document it has naturally flowed from one page to the next. If you place a page break at the end of the page you are simply mandating what Pages has already voluntarily done. But if you insert a second page break you should get a new blank page. In other words, if you put your cursor at the bottom of page 6 and insert a page break you will move to the top of page 7 which has text because it is still page 7. Insert another page break and page 7 becomes page 8 and you'll have a blank page 7.
    Note: if you move your cursor into the middle of the document and insert a section break you'll see that the thumbnail browser shows two sections; one ending on the page above your cursor and one starting on the page your cursor is in. This is useful to understand.
    Second Note: if you use the Insert>Sections option it always inserts a new section at the bottom of the section your cursor occupies. Since your document currently has one section, that's why you wind up with the inserted page at the end of your document.

  • How to insert a page in the middle of the document

    How can I add a page in the middle of a document? There are a lot of images in the document and they tend to shift each time I add text.

    Pages version? Number, please!

  • How can I add a page or pages in the MIDDLE of a photo book I'm making?

    I found some photos I want to put in a page in the middle of a photo book that I'm making, not at the end.  Is there a way to add pages in the middle of the book?

    Add the page using the "Add Page" button - it will appear at the end of the book. In "All Pages" view simply drag it between the pages, where you want it to appear.

  • Can I add a page in the middle of an iphoto book?

    I have created a photo book and would like to add a page of pictures in the middle of the book. Can I do this or can I only add pages at the end?

    The thumbnail browser shows one small page thumbnail for each page of your document. Each yellow bounding box indicates a section. So the thumbnail browser indicates your document has a single section with 50 pages in it.
    As you've typed your document it has naturally flowed from one page to the next. If you place a page break at the end of the page you are simply mandating what Pages has already voluntarily done. But if you insert a second page break you should get a new blank page. In other words, if you put your cursor at the bottom of page 6 and insert a page break you will move to the top of page 7 which has text because it is still page 7. Insert another page break and page 7 becomes page 8 and you'll have a blank page 7.
    Note: if you move your cursor into the middle of the document and insert a section break you'll see that the thumbnail browser shows two sections; one ending on the page above your cursor and one starting on the page your cursor is in. This is useful to understand.
    Second Note: if you use the Insert>Sections option it always inserts a new section at the bottom of the section your cursor occupies. Since your document currently has one section, that's why you wind up with the inserted page at the end of your document.

  • How do I insert a page in the middle of a section in iBook. The insert always puts it at the end of the section.

    I am writing an iBook, and I need to insert a page in the middle of the section without disrupting the layouts on the following pages.  I keep trying to insert, but it always sticks a new page at the end of the section.  Is there any way to add a page, or move pages around in an iBook?

    Using the thumbnail view on the left, select the page you want a new one after, then right click and choose 'Insert Page'....that should do it.

  • How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

    How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture.  Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

    Homestly haven't a clue what's going on there. 
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • How to add A single row at the middle of the table in a Webi report

    Hi,
         I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
                                                    Thanks in advance
    Regards
    Monika

    Hi Monika,
    It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
    Can you explain in more detail what you are trying to do?
    Thanks

  • Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

  • Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. Any help?

    Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks

    I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
    I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps!

  • How to add an extra page to the index.html page on dreamweaver CS6?

    How to add an extra page to the index.html page on dreamweaver CS6?

    Index.html = your domain's home page.  There is only one home page per site.
    To create a new page from your index, go to File > SaveAs > filename.html.  Repeat for other site pages.  Add links on your index page that lead to other site pages.
    See  Creating your first web site in DW CC (5-part tutorial)
    https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
    Nancy O.

Maybe you are looking for