Add a list from a subsite to the top level site SharePoint 2013
Hello, I am trying to display a calendar from sub site to the top level home page and cannot seem to make it happen. I have opened the calendar in SPD and saved that as a webpart file to my desktop and then uploaded into the app gallery and web
part list and when I go to add it to the top level home page I get the following error: 'List does not exist' 'The page you selected contains a list that does not exist. It may have been deleted by another user." Any idea?
I am running 0365 w/SharePoint 2013.
Thank you!
Hi,
Please perform the steps below:
Access calendar list in subsite, in the Customize List tab, click Edit List. It will open SharePoint Designer.
In Views tab, click Calendar, it will open list view in Advanced mode, and you will see code.
Delete the part between <ZoneTemplate> and </ZoneTemplate>
click INSERT in the toolbar > DataView > click calendar list > List View Tools bar appears in green color.
Click WEB PART, save web part to site gallery (ensure you have site-level admin permission)
Access root-site, insert web part to page, the web part is in Miscellaneous category.
For clearly:
Regards,
Rebecca Tu
TechNet Community Support
Similar Messages
-
How to retrieve Task Lists from All Subsites to the Parent Site and display in Grid view using CAML Query + object model
do u just want task list or items under task list for all subsites
for items use spsitedataquery ref
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spsitedataquery.aspx use recursive to get it from alll subsite under site collection
for tasklist only u can a simply use a for loop to find in all subsite
Manish Sati -
Passing data from a subvi to the top level with continuously running loops
Hi All,
This is a very simple question, for some reason the data available at a subvi indicator is not making it to the top level vi. I think it might be something to do with the while loop I am using but I cant figure it out, any help will be appreciated. I don't think I fully understand how the data gets out of a continuously running loop.
GPSdisplay runs a driver called GPS.vi (im not worried about my event structure just yet which might be wrong, but I am yet to test that bit yet) Probe 1 should have the values from GPSCluster
Loop within GPS.vi. GPSCluster (Probe 2) is being updated correctly
I cant work out why the data is not being passed to GPSCluster in the top vi
Solved!
Go to Solution.Hi bennymacca,
I think you are on the right track with an FGV. You can do this fairly easily with the GPS vi that you have.
Before I go any further, your GPS while loop will only return the last reading, and because the "Read" boolean output state is FALSE, it will not stop. Do you see it exit at all? From the logic I read, once entering this while loop it won't stop until told to.
There are a 3 options you can try.
1) Use an FGV, as you are looking into. To do this you will need to change the state boolean to TRUE and put shift registers in for the GPSCluster - to parse the information around, holding it each time the vi is called and exited. Outside the while loop you will wire up the Cluster to the indicator that you wish to collect (OR, you could have it inside the case statement where it is read - be careful here, though).
2) in the main code, above the sequence frame you can place the GPS vi while loop (the "Read" one), having the state boolean wired to a Stop button local variable. This while loop will start depending on how LV feels, so wire an error line to both the While loop and Frame start (indicating that both are to run in a parallel fashion), OR you can put it in a case statement and say 'go' when you want to start reading. With this while loop, you can then output the Read data directly into your Cluster variable as it is generated.
But, with (2) you are moving yourself away from the purpose of the GPS vi, which would be to bring all functionality of the GPS functionality into one sub vi - which is a good idea.
3) put a condition on the "Read" case statement boolean state - only make it TRUE when you wish to stop reading data (do you have a time or condition you can refer to here?). Even doing so, you would/may still need shift registers on your while loop to retain data for each iteration.
I hope all of that helps. Cheers. David. -
Copy sharepoint 2013 subsite names to top level site list
How could I copy sharepoint 2013 subsite names to a top site list by using workflow?
Hi,
In SharePoint 2013, we can use REST API to get all the subsite names in workflow, then add the values in to the list.
REST URI:
http://WEBAPPURL/sites/SITENAME/_api/web/webs?$select=Title
Calling the SharePoint 2013 Rest API from a SharePoint Designer Workflow
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/
Best Regards
Dennis Guo
TechNet Community Support -
SharePoint 2010 Content from top level site hidden from search results on subsite.
Hi Everyone,
The issue I am having is that when a group of people are in there site, we'll call it site B, and they hit the search function, they only get results from site B and subsites of site B, but nothing from the top level site, site A. does anyone know of anyway
to get results from site A when searching in site B? This would really help me out a lot.
Thanks!
Best regards, MikeHi Mike,
According to your description, my understanding is that you want to display the content in top level site in search results page when doing search in subsites.
By default, the search scope is set to This Site in all sites, so the search scope in subsites is limited to the subsites.
I recommend to create a Search Center and then edit the Search settings in the top level site settings, please refer to the image below:
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
A site collection was created with the URL intranet.contoso and it was added to the DNS as intranet.contoso. The top-level site was created successfully after that with the URL being
http://intranet.contoso/main but it is not launching and the following is the error message -
This page can't be displayed.
This will be a production environment so disabling the security loopback will not be an option. Any suggestions?
Many Thanks,I can connect only to the SharePoint Central Administrator from the client computer but not the top level site.
The error i'm getting is This page can't be displayed.
Make sure the web address http://contonsoportalis correct
Look for the page with your search engine
Refresh in a few minutes
Fix connection problems - When clicked the following shows up "Make sure the computer or device is turned on and connected to the network" Windows can't find contosoportal. If the computer or device you are trying to reach is nearby,
make sure it is turned on and connected to the network. Otherwise contact your network administrator for assistance.
The DSN already had a host created for an intranet that is running SharePoint 2010 called intranet so I created a new host (A and AAA) named it Portal insert the ip address of the new sharepoint 2013 server but it still didn't work.
This is the configuration shown in the DNS
Host A Tab -
Host (uses parent domain if left blank)
Portal.contoso.local
IP address: 192. X.X.X for the SharePoint Server
( Should I create a CNAME instead of a new host for the portal? )
I added the host names in the register but it still does not work....
It's a virtual environment running on top of hyper V - One server for SharePoint another for SQL and both joined to the DC. -
Format Text tab is missing from Edit on Top Level Site home page
Hello,
Hoping for some help - not sure where to go with this.
I've been working on a SharePoint site for my company.
I need to change the top level site main page text layout to 3 columns.
I am pretty sure I was able to do this a few days ago but now when I edit the page the Format Text tab is not there.
I can get it on all my sub sites, just not the top level site.
I must have screwed this up somehow but I haven't a clue as to how to get it back.
Thanks
SteveHi Steve,
It sounds as though the site template for your root web is a team site or general collaboration site that is using content pages stored in the sitepages library. Is that correct? If you are using publishing features than you could set a custom layout in
the "pages" tab, but it sounds as though you do not have this feature.
A workaround could be to create a new page with 3 columns, copy your homepage content to this new page and finally set the new page as your homepage.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield -
Hi,
I have a sitecollection named sitecollectionA....
There are 3 subsites under this site collection named as site A, site B, site C
and there are many libraries present in these subsites.
I want to fetch the items from all the libraries present in site B ONLY.
My custom webpart is in site B.But I am not able to fetch the data from this particular site(site B).
I am using SPSiteDatauery....but getting nothing with below scopes-
query.Webs = "<Webs Scope=\"Recursive\" />"; ---- this gives data from all subsites and their subsites
query.Webs = "<Webs Scope=\"\" />"; - ----this gives data from only the top level subsite of sitecollectionA
Below are few lines from my code.....
SPSiteDataQuery query = new SPSiteDataQuery();
query.Lists = "<Lists ServerTemplate=\"101\" />";
query.Webs = "<Webs Scope=\"\" />";
Please help...Got the answer....
I defined my site collection object like below and it worked.
SPSite site = new SPSite(SPContext.Current.Web.Url); -
How do I add multiple pages from my scanner to the adobe app?
How do I add multiple pages from my scanner to the adobe app?
You can't do this in Reader. It must be done in Acrobat on Windows or Macintosh.
-
Up 'til now, from System 7.1 to Tiger—I skipped Leopard—you simply dragged the item onto the folder window's titlebar (since that folder's icon was, naturally, not in its own window) and BINGO! there it was, at the top level. Nothing I can think to do in Snow Leopard seems to work.
Thanks. Most definitely does, although when experimenting I found the left window edge was closer, and 'scrubbing' the item just out of the window and back in seemed to fit the underlying file and folder metaphor better to my mind than just dropping it any old where in the window.
And 'any old where', at any old speed doesn't always bring up the oh-so-subtle blue border that says, "I get it, you wanna add something to this window, hit me." That's The Clue. There seems to be an invisible line you hafta cross, and some kind of deliberate pace you hafta hit. Too fast and SL doesn't seem to always take it seriously. But that left edge scrub can be quite fast.
Sorry about the over hasty denial, I was checking my facts and editting to say you were right when the board was shut for some sort of maintenance, and my bad became permanent. Please forgive. -
How to transfer a contact list from a cd to the Iphone 4S
How to transfer a contact list from a CD to the Iphone 4S?
Import them from the CD to a supported contact application on your computer, then sync them to your phone.
-
I can not add any content from my computer to the iPhone through iTunes
I can not add any content from my computer to the iPhone through iTunes
syncing itunes windows
first open itunes on windows computer
there's a small shaded box in upper left corner click it and show menu bar
now go under view and show side bar
go under help and check for updates (11.1.3 current) - update if needed
plug in iphone (or ipad, ipod ect..)
when the device shows up in sidebar click on the name of device not the arrow
this opens up a summary page
across top says info, apps, music, photos, ect...
click on what you want to sync ie music
check the top box that says sync music select -entire library or selected songs and pick what you want by checking
now apply or sync at bottom
Peace, Clyde -
Name from the Top level Parent
I need to write a property to retrieve value from the top level node. My current heiarchies are:
A1
A2
S1
A3
B1
D2
S1!Shared
B2
C1
C2
S1! Shared
C3
The required property is to check for the shared node and if the top level parent is A1, then create a property value with A.S1. Similarily, if it is B1 then B.S1 and so on. I am thinking this can be achieved by creating a list, derived property using the top level parent name. ex,
List Value
A1 If shared node then concat A+Name
How to achieve this?The nodes A1 B1 C1 are they part of the same hierarchy and child nodes under the Hierarchy Top Node? or is the scenario something else?
Thanks
Denzz -
Using Installation wizard to deploy SSIS packages from DEV server to QA server package store cause this error;
Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document. Line 773, Column 93". This happens when loading a package and the file cannot be opened or loaded correctly into XML document. This can be the
result of either providing an incorrect file name to the LoadPackage method or the XML file specified having an incorrect format. Please who have the idea of how this issue can be resolved?BI DeveloperHi ,
for this Error one and only one solution
go to view Code, line number and Column number shown in error message,
and Remove code from there till last and save it, it happens when we are moving Package from one server to another server. and VS adds some lines of code at the bottom of package
something like this
andles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0">
<control>
<ddsxmlobjectstreaminitwrapper binary="00080000921400008c040000" />
</control>
<layoutobject>
<ddsxmlobj>
<property name="LogicalObject" value="{BBFB0E
Remove this code and save package it will work.
hope this will help to Developers who are searching for same ......... :) -
Hi SanjayPradhan,
Based on your formula, I could reproduce this issue in my SharePoint 2013 without any CUs.
Then I created a new column using other types not Date&Time, add the formula =IF(ISBLANK([New Column]),"Employee","ExEmployee"), there is no duplicate values when filtering the calculated column. It seems that this issue only
happens when judging Date&Time column in a calculated column.
I tested in my SharePoint Online, and found I could not reproduce this issue on SharePoint Online.
So, for your issue, please check whether you install any CUs
for your SharePoint 2013. And please install the latest CU for SharePoint 2013.
You can find the latest CU for SharePoint as the link:
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=346
Best Regards,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
How do I use time capsule as a direct backup drive only connect to my macbook pro via ethernet cable
I have recently abandoned my cable internet service provider and am using my iPad as a hotspot via verizon wireless service. I am trying to reconfigure my time capsule as a back up drive only connected by an ethernet cable. I was able to set it up
-
How to find out the error in J2EE application without debugging
Hi all, I am trying JCO example for Sales order in Netweaver Development Studio 2.0.3 and JCO 2.1.4. I am using Java class as a object and calling the class in servlet. I am checking one by one method ie systeminfo for getting connection and Salesord
-
[SOLVED]MATE desktop, problem
Need help, I deleted my bottom bar that goes across the screen on MATE desktop, and cannot the find the setting to restore the bottom bar that goes across screen Last edited by VikingWarrior75 (2014-12-25 07:43:33)
-
Hi, I am working on a scenario where the client is not desiring the SRM PO created on the SRM Portal to be replicated (reflected) in ECC. ECC should not contain any SRM POs. Is this possible? If yes, how can this be done? On the other hand they just
-
All imported photos need cropping
I imported a large number of photos and everyone of them has a fine white line along one or two edges making it necessary for me to lightly crop each one...I imported nearly 3000 photos. Why did this happen...and does iPhoto have a batch feature for